| Description | Ceramill Mikro 5x Dental Milling Machine●Using Amann Girrbach’s proprietary cutting-edge processing technology, we are able to produce highly accurate and well-fitting restorations.●A 5-axis dry processing machine that can be used for a wide range of purposes such as blanks and hybrid resin blocks.●Excellent cost performance due to low investment cost and high productivity.●The high-quality component structure and sturdy design provide both high processing performance and excellent durability. | Image Quality
According to DEXIS, their digital xray system provides detailed image quality and includes image enhancement tools that increase diagnostic capabilities. When the 9 evaluators were asked to rate the system’s image quality and enhancement aids, 89% rated them as excellent to very good. One of the evaluators commented that the system’s “ClearVu and image magnification allow us to diagnose very effectively.”Overall Satisfaction
When asked to rate their overall satisfaction with the DEXIS Digital X-ray System, 89% of the evaluators rated it as excellent to very good. Commented one evaluator, “DEXIS has been very responsive to our needs.” | The Waterlase express is the all-tissue laser that will change the way you practice dentistry. Waterlase Express has the power to solve dental problems beyond expectation. The versatile and gentle combination of laser energy and water has the power to relieve dental anxiety at the source, for you, your team, and your patients. The countertop all-tissue laser features a miniaturised laser engine that is 50% smaller than the Waterlase iPlus, offering the benefits of all-tissue laser technology in a way that is compact, simple and easy to use. | Caries diagnostic aid for surface caries.
TRIOS 4 has built-in fluorescent technology that aids in the identification of possible caries. Using TRIOS 4, dental professionals can now be aided in the early-detection of surface caries, without the need for an additional scanning device.
Caries diagnostic aid for interproximal caries.
TRIOS 4 will also feature a dedicated transillumination smart tip later this year. The smart tip will aid in the identification of possible interproximal caries undetectable to the eye, without emitting radiation. | Since the introduction of conventional X-ray film development in dental medicine, Durr Dental has been leading the way in diagnostics for dental surgeries. Digital X-ray with Durr Dental offers dentists images with high resolution to meet all diagnostic demands. More than 40 years experience in the development of X-ray technology leads time and again to practice-oriented and innovative solutions. The VistaScan Mini image plate scanner makes image plate diagnostics even faster for dentists. | The industry’s most cost-effective and user-friendly dental mill, the DWX-4 produces single crowns, copings, bridges and hybrid abutments with precision and ease. The DWX-4 is the ideal device for labs just getting into digital milling or labs that need a second device for urgent jobs. With the DWX-4 dental milling system, you can quickly and economically mill on-demand in a wide variety materials, including the latest hybrid ceramics. |
| Content | Ceramill Mikro 5x Dental Milling Machine
Ceramill Mikro 5x have a maximum precision, future-security and full inhouse control due to maximum material and indication diversity form the basis of the ceramill® machine concept.Splints, bars, implant bridges – the 5-axis unit Ceramill Mikro 5X not only masters conventional crown and bridge work but was also designed for fabricating more complex indications with dry millable materials.The high rigidity and stability of the machine are based on the compact construction design of the sister model Ceramill Mikro 4X, without having to forego the advantages of 5-axis technology. The result is absolutely low-vibration processing, which in combination with Ceramill control technology produces impressive precision on the blank.Fast processing times, maximum quality and a wide range of indications and materials make the Ceramill Mikro 5X a genuine winner in the laboratory in terms of productivity. The result is a material processing process with maximum vibration reduction, which, combined with the innovative Ceramill control technology, gives the highest degree of precision when machining the block. Short processing times, highest quality and a wide range of indications and materials make Ceramill Mikro 5X, in terms of performance, a real winner among devices in the prosthetic laboratory.The Ceramill Mikro 5X is a 5-axis machine capable of not only handling traditional crown and bridge procedures, but is also designed for the production of more complex products on dry friable materials. The high rigidity and stability of the machine is based on the compact design of the Ceramill Mikro 4X model. The result is an absolutely low-vibration machining that, combined with Ceramill control technology, ensures impressive precision during operation.Benefits Ceramill Mikro 5x- High performance thanks to DNA milling strategies
- Maximum range of indications in 5-axis dry milling
- Space-saving, compact design with the latest 5-axis technology
- Fast, stable and efficient thanks to low-vibration monocoque design
- High-quality machine components guarantee constantly high precision and durability
Important Features Ceramill Mikro 5x- Milling unit for using entry into the world of CAD/CAM in-House production.
- Option to purchase an additional holder 71 for 3 pieces of composite blocks intended for dry milling.
- During milling, there are minimal vibration, and therefor an absolutely precise result of the prosthetic work is produced.
- The milling machine is equipped with a holder 8 cutters with automatic tool change.
Advantage and benefits Ceramill Mikro 5x- Holder for 8 cutters with automatic tool change.
- Open system.
- Additional 71 for 3 pieces of composite blocks intended for dry milling.
- It is an open system accepting .stl format for easy entry into the world in-House CAD/CAM production.
These materials can be milled- Zircons.
- Plastics for dry milling.
- Waxes.
- Presintered metal (Sintron).
- Hybrid materials.
Technical parameters- Axes: 5
- Processing mode: Dry
- Tool management: 8-compartment tool changer, management of replacement tools
- Dimensions: 465/515/585 (mm)
- Weight: 50kg
- Power Output: 250 W
- Motor Speed: 60,000 rpm
- Compressed Air: 50 L/min. at 6 bar
Product details Ceramill Mikro 5x Dental Milling Machine| System name: | Ceramill in-house system | | Type of processing: | mill dry | | Number of axes used on the workpiece: | five axes simultaneously | | Measures and weight: | D / W / H: 465 x 515 x 585 mm; 50kg | | Type of drives: | Servo like – closed loop system | | Milling spindle performance data: | 60,000 rpm, 250 watts | | Processable materials: | CoCr sintered metal, zirconium oxide, HT zirconium oxide, HT zirconium oxide colored, zirconium oxide, transparent plastics, milling wax, plastic, PEEK, hybrid ceramics | | Machine running time per unit – material-related: | Zirconium oxide: approx. 10 min., PMMA: approx. 14 min., wax: approx. 8 min., CoCr sintered metal: approx. 10 min.; depending on indication and size | | Choice of material: | Zirconium oxide: approx. 10 min., PMMA: approx. 14 min., wax: approx. 8 min., CoCr sintered metal: approx. 10 min.; depending on indication and size | | Workpiece cooling: | Air (dry machining) | | Dust extraction system available?: | Ceramill Airstream (optional) | | Number of workpiece locations and holders: | a) Milling cutter magazine with eight tool positions including sister tool positions for automatic tool changing b) manually exchangeable holders and adapters for milling blocks | | Tool change: | automatically, during machining the machine switches between roughing and finishing tools, worn milling cutters are replaced with sister tools | | Workpiece change: | manually | | Dimensions of the blank shapes that can be used: | Dental arch shape in different heights, 98 mm blanks, different dry-milling block materials | | Software for milling path generation CAM software: | Ceramill Match 2 | | Is there an undercut on the inside and outside of the scaffolding?: | yes, always on the inside of crowns and bridges with undercuts; telescopes and abutments can also be milled this way; optional: height optimization | | Is it possible to tilt the blank without changing the scaffolding alignment to save material?: | yes, possible in all axes, height optimization | | Interface to CAD software: | open to open STL files | | Recommended retail price of the manufacturer milling unit / CAM software: | upon request | | Service telephone / information: | Ceramill Helpdesk: DE: +49 72 31 / 957 300, INT: +43 55 23 / 62 333 300 |
The Ceramill Mikro 5x 5-axis machining machine can handle a wide range of complex cases using dry machining materials, not only crowns and bridges, but also splints, bars and implant bridges.
Based on the compact design of Ceramill Mikro 4x, which has excellent equipment robustness and stability, we have added the machining performance of 5-axis machining. Our unique control technology reduces vibration during processing, making it possible to process restorations with even higher precision.
The Ceramill Mikro 5x’s faster processing, high quality and adaptability to a wide range of applications and diverse materials result in high productivity and make you a real winner.●Using Amann Girrbach’s proprietary cutting-edge processing technology, we are able to produce highly accurate and well-fitting restorations.●A 5-axis dry processing machine that can be used for a wide range of purposes such as blanks and hybrid resin blocks.●Excellent cost performance due to low investment cost and high productivity.●The high-quality component structure and sturdy design provide both high processing performance and excellent durability.To make the prosthesis designed by the software, the obtained information must be sent to the milling machine so that the necessary work for turning it can be done by the CAM software and the milling machine. After cutting, the desired prosthesis is painted and then baked in a dental furnace to obtain a uniform and stable color, and finally, after testing and ensuring its suitability, it is glued with cement. | Dexis Intraoral Digital Dental X-Ray SensorProduct DescriptionDexis Intraoral Digital Dental X-Ray SensorSoftware Ease of Use
According to the manufacturer, the DEXIS x-ray software was designed to be highly effective throughout diagnosis, treatment planning, and treatment. It is intended to serve as an imaging hub, managing all digital images, including intra- and extraoral radiographs and photographs. The manufacturer states that the images can be quickly organized, stored, retrieved, printed, and shared with patients and colleagues. The 9 dentists who participated in this product evaluation were asked to rate the DEXIS Digital Imaging software on its ease of use with regard to taking and accessing radiographs and for diagnosis, patient education, and communication with colleagues and insurance companies. Six of the evaluators rated the system as excellent and 3 rated it as very good. One evaluator commented that “when communicating with patients, we use DEXIS images displayed on a monitor in front of the patient every day on virtually every patient.” Software Integration
The manufacturer claims that the DEXIS imaging software can be easily integrated with all major practice management systems. According to DEXIS, the DEXIS Integrator automatically synchronizes with the patient record.When the evaluators were asked to rate the software integration with practice management software and interface with hardware (eg, cameras, panoramics, and scanners), 78% rated it as excellent to very good, while 22% rated it as good. One of the evaluators said, “The bridge to our practice management systems is seamless. We use [the] DEXIS digital pan[oramic] so that we can store panoramic x-rays easily in the same location as full series. We use an intraoral camera to store preoperative and interoperative photographs for excellent documentation.” Sensor Comfort and Ease of Use
According to DEXIS, the heart of their digital system is the PerfectSize sensor. The manufacturer states that their single-size sensor has 3 advantages:
1) because the electronics are on the back of the sensor, the active imaging area is most of the total sensor size;
2) the beveled corners, slim profile, and rounded casing allow for accurate placement and patient comfort;
3) patented cord placement allows the practitioner to take vertical and horizontal bitewings and all periapicals with only 1 universally sized sensor.
The evaluators were asked to rate both the ease of use of the sensor and patient comfort. Five evaluators rated ease of use excellent and 4 rated it very good. With regard to patient comfort, 3 evaluators rated the sensor excellent and 6 rated it very good. One evaluator noted that he experienced a few issues when placing the sensor in some children and patients with very small mouths. Another evaluator, however, is very happy with the sensor, saying, “I chose DEXIS to take a full radiographic series on every patient. It was the only direct image system we tested that met that objective.” Image Quality
According to DEXIS, their digital xray system provides detailed image quality and includes image enhancement tools that increase diagnostic capabilities. When the 9 evaluators were asked to rate the system’s image quality and enhancement aids, 89% rated them as excellent to very good. One of the evaluators commented that the system’s “ClearVu and image magnification allow us to diagnose very effectively.” Overall Satisfaction
When asked to rate their overall satisfaction with the DEXIS Digital X-ray System, 89% of the evaluators rated it as excellent to very good. Commented one evaluator, “DEXIS has been very responsive to our needs.” System Includes* a highend CCD sensor
* portable PC card and DEXusb connection options
* DEXIS imaging software
* a complete set of sensor holders and accessories
* on-site training
* a printed instruction manual
* training tutorials on CD
* a quick reference guide for the operatory
* 1 year of DEXcare support. | 2019 BIOLASE Waterlase Express Dental Laser With Hand PieceRestorative
– Cavity Preparations
– Sub-gingival decay removal
– TroughingSoft-Tissue
– Achieving hemostasis
– Frenectomy techniques
– Biopsies and lesionsPerio
– REPAIR Perio protocol (all steps)
– Closed crown lengthening
– Flap surgeryImplant
– REPAIR Implant protocol (all steps)
– Implant debridement
– Flap surgeryEndo
– Access, cleaning, and shaping
– Pulpotomy, Pulp Cap
– Disinfection of Root Canal
– Removal of Smear LayerSpecifications:
– Wavelength: 2.78 µm (2780 nm)
– Max. Power Output: 4 W Pulse
– Energy: 200 mJ Pulse
– Rep Rate: 5-50 Hz Pulse
– Duration: H: 60 µsec, S: 700 µsec
– Laser Engine: Miniaturized Er,Cr:YSGG laser engine
– Fiber Optic Cable: White, highly flexible, reliable
– User Interface: Applications-based, removable tablet
– Touchscreen Size: 9.7”x 6” (24.64cm x 15.24cm)
– Pre-sets: 95 procedural presets, with simple slider bar to adjust settings within each procedure
– Additional Content: Procedure animations, case studies, best practices
– WiFi-enabled for BIOLASE Connect: Yes
– Weight: 27 Lbs (12.247 kg)The Waterlase express is the all-tissue laser that will change the way you practice dentistry. Waterlase Express has the power to solve dental problems beyond expectation. The versatile and gentle combination of laser energy and water has the power to relieve dental anxiety at the source, for you, your team, and your patients. The countertop all-tissue laser features a miniaturised laser engine that is 50% smaller than the Waterlase iPlus, offering the benefits of all-tissue laser technology in a way that is compact, simple and easy to use.2019 BIOLASE Waterlase Express Dental LaserWaterlase Express is the only laser to feature an in-depth, step-by-step, 4K HD animation for every step of every procedure. No matter your level of expertise, from beginner to advanced user, the Waterlase Express animation library is a dazzling, informative training resource.– 95 clinical presets for soft tissue, hard tissue and bone.
– Step-by-step procedure animations.
– Removable tablet with easy-to-use touchscreen interface.
– Loaded system menu features on-board reference material.
– H MODE – 60 microseconds – a cooler mode for cutting enamel and all other applications.
– S MODE – 700 microseconds – a hotter mode for coagulation.
– Stay up-to-date and connect with fellow users, clinical mentors and online training directly from the unit.
– Customer care access for direct help when needed.
– Sturdy handle for easy transport makes the Waterlase express conveniently portable.
– Wireless footswitch for easy integration.
– Light and flexible SureFire trunk fibre ensures minimal resistance and treatment fatigue.
– Over 2 hours of 4K-Ultra-HD learning content | 3Shape TRIOS 4 Intraoral ScannerOur most powerful intraoral scanner to date Take your dentistry beyond treatment
Our intraoral scanning solutions allow you to take your dentistry beyond. The new 3Shape TRIOS 4 combines our established superior scanning technology with groundbreaking caries diagnostic aid technology* for both surface and interproximal caries. No additional scanning device needed. Smart tips 3Shape TRIOS 4 Intraoral ScannerThe new generation of TRIOS smart tips feature instant-heat technology for optimized scanning.Be scan-ready in seconds with instant-heat technology.Scan 2-3 times as many patients with instant-heat in combination with 30% more battery life.Optimal scanning due to automatic use counter and tip-change alert.The TRIOS system is a complete in-house ecosystem including a scanner and extensive design software. This means there are plenty of options depending on your needs. Those who are just looking for a scanner and want to utilize labs may look into the basic, cheaper options. Those who want to design crowns, bridges and other prosthetics can opt for design modules. The only missing component is a milling machine, which if you want to mill restorations in-house, will have to be from a third party. This proves to be a weak link in the digital chain.At iDD, we have been using the TRIOS 3 for over four years in our clinic, spending literally thousands of hours learning the workflow. We have carried out all aspects of dentistry using the TRIOS system including same-day crowns, implant surgical guides, implant restorations and digital smile design.Disclaimer: This is an impartial review of the scanner and we do not have any ties to the company. The team at iDD remain unwaveringly committed to providing you with objective and trustworthy information and therefore do not seek any sponsorship. 3Shape kindly loaned us a TRIOS 4 scanner, due to a personal interest in upgrading our older TRIOS 3 model. Our team at iDD are constantly approached by scanner companies to review their scanners and it is always made clear that they will have no part in writing reviews or restricting any conclusions iDD makes in our thorough analysis and clinical use of these products. | DUERR VISTA SCAN MINI EASY COMPACT & EASYDurr Dental VistaScan Mini Easy image plate scanner makes image plate diagnostics even faster for dentists. The compact device is particularly easy to use and requires a minimum of space so that it can be installed in the treatment room.The advantage: X-ray and scanning directly at the chairside. The reusable VistaScan image plates are read out in top quality within seconds. There has never been a better time to change over to image plates!Features:DUERR VISTA SCAN MINI EASY COMPACT & EASY- Top image quality
- For common image plates sizes (size 0 and size 2)
- Easy integration via DBSWin imaging software or your own third party software
- Ideal chairside appliance
- Interface with PC via USB or network
A new standard for image plate scanners
The new compact VistaScan Mini View impresses users with its tried-and-trusted technology and the excellent image quality of the VistaScan family. It also offers numerous functions which noticeably increase comfort, efficiency and safety during everyday work. This gives the surgery team the confidence that they can rely on their equipment.The best possible detection of details – reliable diagnostics
The level of detection of details achieved by the VistaScan image plates is superior to that of both X-ray film and other image plate systems. This provides dentists with a sound basis for making reliable diagnoses. The DBSWIN imaging software provides help in this regard and ensures ergonomic work processes. The VistaScan Mini View can even be used with other common software if necessary.The easy way from the film to the image plate
Dürr Dental image plate technology ensures an extremely easy switch from X-ray film to a digital workflow. Since the X-ray process and image formats do not differ from those for analogue film, there‘s not really anything new to learn. The thin, flexible plate offers clear advantages for both the surgery team and patients: It is easier to position and sits more comfortably in the patient‘s mouth. Once an image has been taken, it appears on the monitor in just a few seconds. The durable image plate is then immediately ready to be used again. | Roland DWX-4 Dental Milling Unit
Digital dental technologies are transforming every aspect of the dental industry, making it easier than ever to produce precise crowns, copings and bridges. The latest technological advancements in scanning, CAD/CAM software and CNC milling allow digital dental labs to deliver custom production with speed and precision and enjoy optimal accuracy and repeatability.The industry’s most user-friendly desktop milling solution, the Roland DWX-4 compact dental mill, is at the forefront of this technological revolution. With the DWX-4, you can mill a single crown or small bridge quickly and economically. Affordably priced, the DWX-4 is ideal for any lab just getting started in digital dentistry or those labs with scanners who no longer wish to outsource production. It’s also the perfect addition to labs that need a second device for urgent jobs. With the DWX-4, these labs can mill a single crown or bridge on demand, without tying up their larger production mills.This affordable, precise 4-axis desktop mill is an ideal choice for labs just getting started in digital dentistry or for those that want to perform smaller, time-urgent jobs (like a single crown or small bridge) without tying up their larger production mills.- Compact design is ideally suited for all lab environments
- 2-station automatic tool changer
- 4-axis simultaneous lead/worm screw driven machining
- Tool diagnostics with tool life management
- Air blower to aid with difficult-to-mill materials
- Negative ion generator for neutralizing static electricity
- Multicast capability for connecting up to four DWX dental mills to one computer
- Color-coded LED light signals machine status
- Automatic calibration
- E-mail notification system
- Dust collection system with airflow sensor
- Virtual panel ensures easy operation
- G-code compatible
- Compatible with industry-standard software
- Open architecture for easy integration into a complete production solution
- CAM software included
The industry’s most cost-effective and user-friendly dental mill, the DWX-4 produces single crowns, copings, bridges and hybrid abutments with precision and ease. The DWX-4 is the ideal device for labs just getting into digital milling or labs that need a second device for urgent jobs. With the DWX-4 dental milling system, you can quickly and economically mill on-demand in a wide variety materials, including the latest hybrid ceramics. |
Reviews
There are no reviews yet.