Ceramill Mikro 5x have a maximum precision, future-security and full inhouse control due to maximum material and indication diversity form the basis of the ceramill® machine concept.
Splints, bars, implant bridges – the 5-axis unit Ceramill Mikro 5X not only masters conventional crown and bridge work but was also designed for fabricating more complex indications with dry millable materials.
The high rigidity and stability of the machine are based on the compact construction design of the sister model Ceramill Mikro 4X, without having to forego the advantages of 5-axis technology. The result is absolutely low-vibration processing, which in combination with Ceramill control technology produces impressive precision on the blank.
Fast processing times, maximum quality and a wide range of indications and materials make the Ceramill Mikro 5X a genuine winner in the laboratory in terms of productivity. The result is a material processing process with maximum vibration reduction, which, combined with the innovative Ceramill control technology, gives the highest degree of precision when machining the block. Short processing times, highest quality and a wide range of indications and materials make Ceramill Mikro 5X, in terms of performance, a real winner among devices in the prosthetic laboratory.
The Ceramill Mikro 5X is a 5-axis machine capable of not only handling traditional crown and bridge procedures, but is also designed for the production of more complex products on dry friable materials. The high rigidity and stability of the machine is based on the compact design of the Ceramill Mikro 4X model. The result is an absolutely low-vibration machining that, combined with Ceramill control technology, ensures impressive precision during operation.
Benefits Ceramill Mikro 5x
High performance thanks to DNA milling strategies
Maximum range of indications in 5-axis dry milling
Space-saving, compact design with the latest 5-axis technology
Fast, stable and efficient thanks to low-vibration monocoque design
High-quality machine components guarantee constantly high precision and durability
Important Features Ceramill Mikro 5x
Milling unit for using entry into the world of CAD/CAM in-House production.
Option to purchase an additional holder 71 for 3 pieces of composite blocks intended for dry milling.
During milling, there are minimal vibration, and therefor an absolutely precise result of the prosthetic work is produced.
The milling machine is equipped with a holder 8 cutters with automatic tool change.
Advantage and benefits Ceramill Mikro 5x
Holder for 8 cutters with automatic tool change.
Open system.
Additional 71 for 3 pieces of composite blocks intended for dry milling.
It is an open system accepting .stl format for easy entry into the world in-House CAD/CAM production.
These materials can be milled
Zircons.
Plastics for dry milling.
Waxes.
Presintered metal (Sintron).
Hybrid materials.
Technical parameters
Axes: 5
Processing mode: Dry
Tool management: 8-compartment tool changer, management of replacement tools
a) Milling cutter magazine with eight tool positions including sister tool positions for automatic tool changing b) manually exchangeable holders and adapters for milling blocks
Tool change:
automatically, during machining the machine switches between roughing and finishing tools, worn milling cutters are replaced with sister tools
Workpiece change:
manually
Dimensions of the blank shapes that can be used:
Dental arch shape in different heights, 98 mm blanks, different dry-milling block materials
Software for milling path generation CAM software:
Ceramill Match 2
Is there an undercut on the inside and outside of the scaffolding?:
yes, always on the inside of crowns and bridges with undercuts; telescopes and abutments can also be milled this way; optional: height optimization
Is it possible to tilt the blank without changing the scaffolding alignment to save material?:
yes, possible in all axes, height optimization
Interface to CAD software:
open to open STL files
Recommended retail price of the manufacturer milling unit / CAM software:
The Ceramill Mikro 5x 5-axis machining machine can handle a wide range of complex cases using dry machining materials, not only crowns and bridges, but also splints, bars and implant bridges.
Based on the compact design of Ceramill Mikro 4x, which has excellent equipment robustness and stability, we have added the machining performance of 5-axis machining. Our unique control technology reduces vibration during processing, making it possible to process restorations with even higher precision.
The Ceramill Mikro 5x’s faster processing, high quality and adaptability to a wide range of applications and diverse materials result in high productivity and make you a real winner.
●Using Amann Girrbach’s proprietary cutting-edge processing technology, we are able to produce highly accurate and well-fitting restorations.
●A 5-axis dry processing machine that can be used for a wide range of purposes such as blanks and hybrid resin blocks.
●Excellent cost performance due to low investment cost and high productivity.
●The high-quality component structure and sturdy design provide both high processing performance and excellent durability.
To make the prosthesis designed by the software, the obtained information must be sent to the milling machine so that the necessary work for turning it can be done by the CAM software and the milling machine. After cutting, the desired prosthesis is painted and then baked in a dental furnace to obtain a uniform and stable color, and finally, after testing and ensuring its suitability, it is glued with cement.
Reviews (0)
Reviews
There are no reviews yet.
Be the first to review “Ceramill Mikro 5x Dental Milling Machine” Cancel reply
Ceramill Mikro 5x Dental Milling Machine●Using Amann Girrbach’s proprietary cutting-edge processing technology, we are able to produce highly accurate and well-fitting restorations.●A 5-axis dry processing machine that can be used for a wide range of purposes such as blanks and hybrid resin blocks.●Excellent cost performance due to low investment cost and high productivity.●The high-quality component structure and sturdy design provide both high processing performance and excellent durability.
SuniRay 2 achieves maximal image quality with superior diagnostic capabilities while maintaining the lowest radiation levels among all digital sensors. The comprehensive and feature-rich Prof. Suni Advanced Imaging Software supplements the SuniRay 2’s high-quality imaging with a wide array of user-friendly customization and image-enhancement tools. With the SuniRay 2, Suni has created a complete digital radiography system that seamlessly integrates with your entire practice.
The DWX-4W goes beyond dry milling and is the epitome of wet grinding technology. It uses 4-axis simultaneous movements to wet grind precision inlays, onlays, crowns, veneers and short-span bridges from glass ceramic and composite resins.
Because the XIOS Scan imaging plates were developed specifically for the Sirona scanner, they offer particularly high image quality. For better identification and visibility in the mouth, the plates have a white, inactive back and a blue, active side.
iRay D3 is one of the most popular products in the world and has been leading the technology since 2004. There are several companies following our concept and make it look similar and sell it cheaper. iRay D3 (DX3000)’s core detail technology and safety features cannot be copied.
iTero HD2.9 simply allows to digitally scan a prepared tooth and wirelessly send this information directly to the dental laboratory for fabrication of a CAD/CAM crown without the gooey mess.
Content
Ceramill Mikro 5x Dental Milling Machine
Ceramill Mikro 5x have a maximum precision, future-security and full inhouse control due to maximum material and indication diversity form the basis of the ceramill® machine concept.Splints, bars, implant bridges – the 5-axis unit Ceramill Mikro 5X not only masters conventional crown and bridge work but was also designed for fabricating more complex indications with dry millable materials.The high rigidity and stability of the machine are based on the compact construction design of the sister model Ceramill Mikro 4X, without having to forego the advantages of 5-axis technology. The result is absolutely low-vibration processing, which in combination with Ceramill control technology produces impressive precision on the blank.Fast processing times, maximum quality and a wide range of indications and materials make the Ceramill Mikro 5X a genuine winner in the laboratory in terms of productivity. The result is a material processing process with maximum vibration reduction, which, combined with the innovative Ceramill control technology, gives the highest degree of precision when machining the block. Short processing times, highest quality and a wide range of indications and materials make Ceramill Mikro 5X, in terms of performance, a real winner among devices in the prosthetic laboratory.The Ceramill Mikro 5X is a 5-axis machine capable of not only handling traditional crown and bridge procedures, but is also designed for the production of more complex products on dry friable materials. The high rigidity and stability of the machine is based on the compact design of the Ceramill Mikro 4X model. The result is an absolutely low-vibration machining that, combined with Ceramill control technology, ensures impressive precision during operation.
Benefits Ceramill Mikro 5x
High performance thanks to DNA milling strategies
Maximum range of indications in 5-axis dry milling
Space-saving, compact design with the latest 5-axis technology
Fast, stable and efficient thanks to low-vibration monocoque design
High-quality machine components guarantee constantly high precision and durability
Important Features Ceramill Mikro 5x
Milling unit for using entry into the world of CAD/CAM in-House production.
Option to purchase an additional holder 71 for 3 pieces of composite blocks intended for dry milling.
During milling, there are minimal vibration, and therefor an absolutely precise result of the prosthetic work is produced.
The milling machine is equipped with a holder 8 cutters with automatic tool change.
Advantage and benefits Ceramill Mikro 5x
Holder for 8 cutters with automatic tool change.
Open system.
Additional 71 for 3 pieces of composite blocks intended for dry milling.
It is an open system accepting .stl format for easy entry into the world in-House CAD/CAM production.
These materials can be milled
Zircons.
Plastics for dry milling.
Waxes.
Presintered metal (Sintron).
Hybrid materials.
Technical parameters
Axes: 5
Processing mode: Dry
Tool management: 8-compartment tool changer, management of replacement tools
a) Milling cutter magazine with eight tool positions including sister tool positions for automatic tool changing b) manually exchangeable holders and adapters for milling blocks
Tool change:
automatically, during machining the machine switches between roughing and finishing tools, worn milling cutters are replaced with sister tools
Workpiece change:
manually
Dimensions of the blank shapes that can be used:
Dental arch shape in different heights, 98 mm blanks, different dry-milling block materials
Software for milling path generation CAM software:
Ceramill Match 2
Is there an undercut on the inside and outside of the scaffolding?:
yes, always on the inside of crowns and bridges with undercuts; telescopes and abutments can also be milled this way; optional: height optimization
Is it possible to tilt the blank without changing the scaffolding alignment to save material?:
yes, possible in all axes, height optimization
Interface to CAD software:
open to open STL files
Recommended retail price of the manufacturer milling unit / CAM software:
The Ceramill Mikro 5x 5-axis machining machine can handle a wide range of complex cases using dry machining materials, not only crowns and bridges, but also splints, bars and implant bridges.
Based on the compact design of Ceramill Mikro 4x, which has excellent equipment robustness and stability, we have added the machining performance of 5-axis machining. Our unique control technology reduces vibration during processing, making it possible to process restorations with even higher precision.
The Ceramill Mikro 5x’s faster processing, high quality and adaptability to a wide range of applications and diverse materials result in high productivity and make you a real winner.●Using Amann Girrbach’s proprietary cutting-edge processing technology, we are able to produce highly accurate and well-fitting restorations.●A 5-axis dry processing machine that can be used for a wide range of purposes such as blanks and hybrid resin blocks.●Excellent cost performance due to low investment cost and high productivity.●The high-quality component structure and sturdy design provide both high processing performance and excellent durability.To make the prosthesis designed by the software, the obtained information must be sent to the milling machine so that the necessary work for turning it can be done by the CAM software and the milling machine. After cutting, the desired prosthesis is painted and then baked in a dental furnace to obtain a uniform and stable color, and finally, after testing and ensuring its suitability, it is glued with cement.
SuniRay 2 Digital Intraoral Sensor Size 1 and Size 2
X-Ray Imaging Properties
Resolution: The pixel resolution of the high resolution (HiRes) sensors exceeds 15 lp/mm. The standard resolution of an X-Ray image, as measured by the modulation transfer function (MTF) exceeds 12 lp/mm. This is measured by using a standard 60 kV intraoral X-ray source.
Does Efficiency: The sensor will produce a high quality image with an X-Ray dose that is only a fraction of the standard dose required by Dental X-Ray film.
Diagnostic Efficacy: The system will produce a superior image quality of images obtained when using standard dental X-Ray film. This allows the dentist to diagnose standard intraoral pathologies encountered during screening procedures.
Wide dynamic range: The sensor pixel well capacity is very high, allowing a higher accommodation of greyscale (bone density) dynamic range.
Sensor Material Biocompatibility SpecificationsThe sensor’s body material and cable material are biocompatible. The sensors and all component materials have been tested to comply with ISO standards, and specifically, the sensor complies with EN IS0-10993 (Biological Evaluation of Medical Devices).
Technical data
Size 1
Size 2
Sensor Dimensions (mm)
39.5 x 26
43.5 x 31.5
Active Area (mm)
31.1 x 20.2
35.2 x 26.2
Sensor Technology
CMOS APS Fiber Plate
CMOS APS Fiber Plate
Maximum Gray Levels
4096
4096
Sensor Cable
3 feet (1m)
3 feet (1m)
Cable Attachment
Reinforced Strain Relief
Reinforced Strain Relief
USB Module
Integrated USB 2.0 Module
Integrated USB 2.0 Module
Software
Prof. Suni
Prof. Suni
X-Ray Imaging Properties SuniRay 2 Digital Intraoral Sensor Size 1 and Size 2
Resolution: The pixel resolution of the high resolution (HiRes) sensors exceeds 15 lp/mm. The standard resolution of an X-Ray image, as measured by the modulation transfer function (MTF) exceeds 12 lp/mm. This is measured by using a standard 60 kV intraoral X-ray source.
Does Efficiency: The sensor will produce a high quality image with an X-Ray dose that is only a fraction of the standard dose required by Dental X-Ray film.
Diagnostic Efficacy: The system will produce a superior image quality of images obtained when using standard dental X-Ray film. This allows the dentist to diagnose standard intraoral pathologies encountered during screening procedures.
Wide dynamic range: The sensor pixel well capacity is very high, allowing a higher accommodation of greyscale (bone density) dynamic range.
Reliable High PerformanceIn addition to milling on X, Y and Z axes, the DWX-4W rotates pin-type blocks 360 degrees on a fourth axis (A axis) to support undercuts. The ball screw-driven 4-axis control allows for smooth, high-precision machining. The DWX-4W’s high-performance 60,000-RPM Jaeger spindle is known for its reliability and supports precision milling of glass ceramics and composite resin. With its multi-pin clamp, the DWX-4W is a wet dental milling machine that can mill up to three different pin-type materials continuously in one operation. As a result, prosthetics for up to three different patients can be produced in a single production run, saving time, labour and costs.
Features and Benefits:
Simultaneous 4-axis machining
4-state Automatic Tool Changer (ATC)
60,000 RPM Jaeger DentaDrive Spindle
CAM software bundled
Virtual Machine Panel (VPanel)
Fully-integrated water and coolant filtration system
Coolant leakage & flow monitoring sensors
Tool life monitoring
Mail notification system
Summary Roland DWX-4W Dental Milling Unit
• Maximum Convenience
• Virtual Machine Panel
• Progress and Error Alerts for Error-Free Milling
• Coolant Compartment and Water Filtration
• Clean Cutting Area for Precision Milling
• Economical Open Architecture
• CAM Software Included
• Growth Potential
• Peace of MindThe DWX-4W’s high-performance 60 000 RPM Jaeger DentaDrive spindle supports precision milling. It’s equipped to mil pin-type blocks, including glass ceramics and composite resin – acclaimed in the industry for their superior strength and aesthetics. materials can be finished with a short finishing tome, dramatically reducing labour and production time.In addition to milling on X, Y and Z axes, the DWX-4W rotates pin-type blocks 360 degrees on a fourth axis (A axis) to support undercuts, the rigid ball screw-driven 4-axis control allows for smooth, high-precision machining. With its multi-pin clamp, it can mil up to three different pin-type materials continuously, enabling production three different patient prosthetics in a single production run. it also features an Automatic Tool Changer (ATC) that auto-changes grinding burs without interrupting the production process.
XIOS scan Sirona
XIOS Scan. Small change. Big impact.
The XIOS scan provides a gentle, easy introduction into the world of digital X-ray imaging. If you want to switch from film to digital without having to give up your tried-and-true working methods, imaging plate technology offers you a myriad of possibilities. You can experience many of the advantages of digital imaging without a darkroom and chemicals while your team continues its regular workflow. XIOS Scan completes the family of intraoral X-ray systems from Sirona which includes the sensors XIOS XG and the intraoral X-ray HELIODENTPLUS source.
Tried-and-true workflow meet the advantages of digital imaging
Outstanding scan quality with 22 line pairs/mm
Scratch-free scanning and automatic film detection
Proven Sirona quality “Made in Germany”Technical data
XIOS Scan
Dimensions (H x W x D) 363 mm x 163 mm x 286 mm
Weight 7.3 kg ± 0.5 kg
Pixel size selectable 23/30 μm
Resolution 22/17 Lp/mm
Interface LAN
Dimensions
Storage plate intraoral
Size 0 31 mm x 22 mm
Size 1 24 mm x 40 mm
Size 2 31 mm x 41 mm
Size 3 27 mm x 54 mmSmall Change. Big Impact.
Xios Scan provides a gentle, easy introduction into the world of digital X-ray imaging. If you want to switch from film to digital without having to give up your tried-and-true working methods, imaging plate technology offers you a myriad of possibilities. You can experience many of the advantages of digital imaging without a darkroom and chemicals while your team continues its regular workflow.The Xios Scan integrates seamlessly with the Dentsply Sirona X-ray units and software to deliver better, safer and faster intraoral diagnostics.For the best digital image quality and the easiest workflowXios Scan works at an outstanding resolution of up to 22 line pairs/mm (theoretical resolution). The result is exceptionally sharp and detailed images - ideal conditions for an accurate diagnosis. The images are transmitted directly to Sidexis 4, Dentsply Sirona Imaging's software, where they can then be further evaluated and diagnosed. The software provides simple controls for later editing of the visual impression of the X-ray in terms of sharpness, brightness and contrast.
Dexcowin IRay D3 Dental Handheld X-Ray System
iRay D3 Dental Mobile Handheld X-Ray
Dexcowin invented the iRay D3 more than 10 years ago, in 2004, after several years of R&D. The iRay D3 has some different names for the OEM, but the official product model name is DX3000. We have designed it as a pure handheld portable X-ray. It has many different features for mobile, battery powered, handheld, cordless, digital, and camera types. It is lightweight, durable, stable, easy to use, saleable, and compatible to all radiation detectors, with clear, effective images. However, what we would like to emphasize, and what we are so proud of about the iRay D3 is that it is safe for handheld use. This is because we are concerned about the safety and care of the operators and patients. This is our top priority and responsibility to our customers. We follow all required rules from FDA, GMP, CE and all local health departments from the over 40 countries and states we have registered in. We keep to the safety regulations during manufacturing. Our long term company strategy for iRay D3 is to “Make it safe,” “”Make it better than yesterday,” and “Make it durable.”A summary of iRay D3 features Dexcowin IRay D3 Dental Handheld X-Ray SystemiRay D3 Convenience & Cost effectiveness
You can stay with the patient, and it is especially beneficial for children.
No need to construct separate shielded rooms, so all operation rooms can be X-ray rooms.
Lightweight 4 lbs gives you handy operation and saves time for full mouth X-ray.
More than 200 shots on single charge (1.5 hour). Battery and a spare battery included.iRay D3 compatibility
Applicable and be compatible with all detectors, film, PSP and all kinds of sensors.IRay D3 Mobility
Completely mobile system with a battery and extras.
Compact design and lightweight allows it to be moved anywhere in and out of office.IRay D3 Safety
Designed for handheld, so it does not affect the operator with extremely low leakage radiation.
Rechargeable Lithium polymer battery is very safe and stable with a safety circuit
Battery can be charged separately with a main X-ray body.Other accessories
AllMyT mobile cart for iRay D3 to be mounted on.
A neck strap to balance the weight and preventing dropping.
iTero HD2.9 simply allows to digitally scan a prepared tooth and wirelessly send this information directly to the dental laboratory for fabrication of a CAD/CAM crown – without the gooey mess. The wireless transmission saves shipping time and eliminates distortion that can often be found with traditional stone modelsThe digital scan is, quite literally, digitally perfect. We then deliver the digital scan to our lab where a precision fitting restoration is created.iTero HD2.9 system eliminated the uncomfortable patient experience of traditional impressions, utilizes advanced state of the art digital technology, and provides with superior fitting restorations with little or no adjustmentsiTero Intra-Oral Scanner
Model: HD2.9
2014 Date of Mfg.
Brochure/Video: Click Here
Limited Use
Includes:
iTero Software (pre-loaded)
90 Day Parts Warranty
User Manual(s)
Free Standard Shipping (Commercial USA Addresses)
Its ergonomic design comes with safe docking station. It has thin fiber optic cable which enables quick data transfer from the wand to the cart. This optimized cable length assists various cart positions in the operatory.Orthodontic treatment is more than just straightening teeth; it’s about ensuring your teeth and jaws are in alignment. To achieve this, we need to get an accurate look at where your teeth are positioned. To do this, we use the iTero Intraoral digital scanner.A good impressionIn the orthodontic and dental industries, ‘impressions’ is the term we use for getting a good picture of where your teeth currently sit. These impressions were previously taken using a type of dental cement. Pasted on your teeth, patients were required to lie for a few minutes while the cement-like material set. The dental professional could then remove the set material which had formed an ‘impression’ of your teeth.This process was messy, rather unpleasant and not very comfortable. Fortunately, that method is a thing of the past. These days, we use scanning technology and at L&L Orthodontics, our technology of choice is the iTero Intraoral digital scanner.
What is the iTero scanner?
The iTero scanner is new 3D orthodontic scanning technology. Using the latest developments in intraoral scanning, the iTero scanner accurately scans your teeth as part of your orthodontic assessment. The iTero scanner is made up of a small, wand-like device which is used to scan your teeth and jaws. The data it is collecting then appears on the computer screen, allowing you to see the ‘impressions’ the scanner is taking.The iTero scanner works in with Invisalign®* treatment and lets you see what your teeth will look like post-treatment, even before you’ve started. Before we recommend a course of treatment for you, we’ll take impressions of your teeth using the iTero scanner to ensure we are making our recommendation on accurate information.To find out more about the iTero scanner and other orthodontic technology we use here at L&L Orthodontics, book your specialist consultation today.
Reviews
There are no reviews yet.