| Description | Ceramill Mikro 5x Dental Milling Machine●Using Amann Girrbach’s proprietary cutting-edge processing technology, we are able to produce highly accurate and well-fitting restorations.●A 5-axis dry processing machine that can be used for a wide range of purposes such as blanks and hybrid resin blocks.●Excellent cost performance due to low investment cost and high productivity.●The high-quality component structure and sturdy design provide both high processing performance and excellent durability. | From general to littles, this machine has you covered. This digital system excels at both general and pediatric practices, with great strengths in cosmetic dentistry and orthodontics as well. | SuniRay 2 achieves maximal image quality with superior diagnostic capabilities while maintaining the lowest radiation levels among all digital sensors. The comprehensive and feature-rich Prof. Suni Advanced Imaging Software supplements the SuniRay 2’s high-quality imaging with a wide array of user-friendly customization and image-enhancement tools. With the SuniRay 2, Suni has created a complete digital radiography system that seamlessly integrates with your entire practice. | The DWX-51D 5-Axis Dental Milling Machine is designed for effortless production of dental prosthetics. Built for precision, error-free milling, you don’t need any machine expertise to operate it. With touch-button controls and automated milling features, the production of high-quality bridges, crowns, inlays, onlays, abutments and other restorations out of 98 mm discs and blocks has been made virtually foolproof. | Because the XIOS Scan imaging plates were developed specifically for the Sirona scanner, they offer particularly high image quality. For better identification and visibility in the mouth, the plates have a white, inactive back and a blue, active side. | The DWX-4W goes beyond dry milling and is the epitome of wet grinding technology. It uses 4-axis simultaneous movements to wet grind precision inlays, onlays, crowns, veneers and short-span bridges from glass ceramic and composite resins. |
| Content | Ceramill Mikro 5x Dental Milling Machine
Ceramill Mikro 5x have a maximum precision, future-security and full inhouse control due to maximum material and indication diversity form the basis of the ceramill® machine concept.Splints, bars, implant bridges – the 5-axis unit Ceramill Mikro 5X not only masters conventional crown and bridge work but was also designed for fabricating more complex indications with dry millable materials.The high rigidity and stability of the machine are based on the compact construction design of the sister model Ceramill Mikro 4X, without having to forego the advantages of 5-axis technology. The result is absolutely low-vibration processing, which in combination with Ceramill control technology produces impressive precision on the blank.Fast processing times, maximum quality and a wide range of indications and materials make the Ceramill Mikro 5X a genuine winner in the laboratory in terms of productivity. The result is a material processing process with maximum vibration reduction, which, combined with the innovative Ceramill control technology, gives the highest degree of precision when machining the block. Short processing times, highest quality and a wide range of indications and materials make Ceramill Mikro 5X, in terms of performance, a real winner among devices in the prosthetic laboratory.The Ceramill Mikro 5X is a 5-axis machine capable of not only handling traditional crown and bridge procedures, but is also designed for the production of more complex products on dry friable materials. The high rigidity and stability of the machine is based on the compact design of the Ceramill Mikro 4X model. The result is an absolutely low-vibration machining that, combined with Ceramill control technology, ensures impressive precision during operation.Benefits Ceramill Mikro 5x- High performance thanks to DNA milling strategies
- Maximum range of indications in 5-axis dry milling
- Space-saving, compact design with the latest 5-axis technology
- Fast, stable and efficient thanks to low-vibration monocoque design
- High-quality machine components guarantee constantly high precision and durability
Important Features Ceramill Mikro 5x- Milling unit for using entry into the world of CAD/CAM in-House production.
- Option to purchase an additional holder 71 for 3 pieces of composite blocks intended for dry milling.
- During milling, there are minimal vibration, and therefor an absolutely precise result of the prosthetic work is produced.
- The milling machine is equipped with a holder 8 cutters with automatic tool change.
Advantage and benefits Ceramill Mikro 5x- Holder for 8 cutters with automatic tool change.
- Open system.
- Additional 71 for 3 pieces of composite blocks intended for dry milling.
- It is an open system accepting .stl format for easy entry into the world in-House CAD/CAM production.
These materials can be milled- Zircons.
- Plastics for dry milling.
- Waxes.
- Presintered metal (Sintron).
- Hybrid materials.
Technical parameters- Axes: 5
- Processing mode: Dry
- Tool management: 8-compartment tool changer, management of replacement tools
- Dimensions: 465/515/585 (mm)
- Weight: 50kg
- Power Output: 250 W
- Motor Speed: 60,000 rpm
- Compressed Air: 50 L/min. at 6 bar
Product details Ceramill Mikro 5x Dental Milling Machine| System name: | Ceramill in-house system | | Type of processing: | mill dry | | Number of axes used on the workpiece: | five axes simultaneously | | Measures and weight: | D / W / H: 465 x 515 x 585 mm; 50kg | | Type of drives: | Servo like – closed loop system | | Milling spindle performance data: | 60,000 rpm, 250 watts | | Processable materials: | CoCr sintered metal, zirconium oxide, HT zirconium oxide, HT zirconium oxide colored, zirconium oxide, transparent plastics, milling wax, plastic, PEEK, hybrid ceramics | | Machine running time per unit – material-related: | Zirconium oxide: approx. 10 min., PMMA: approx. 14 min., wax: approx. 8 min., CoCr sintered metal: approx. 10 min.; depending on indication and size | | Choice of material: | Zirconium oxide: approx. 10 min., PMMA: approx. 14 min., wax: approx. 8 min., CoCr sintered metal: approx. 10 min.; depending on indication and size | | Workpiece cooling: | Air (dry machining) | | Dust extraction system available?: | Ceramill Airstream (optional) | | Number of workpiece locations and holders: | a) Milling cutter magazine with eight tool positions including sister tool positions for automatic tool changing b) manually exchangeable holders and adapters for milling blocks | | Tool change: | automatically, during machining the machine switches between roughing and finishing tools, worn milling cutters are replaced with sister tools | | Workpiece change: | manually | | Dimensions of the blank shapes that can be used: | Dental arch shape in different heights, 98 mm blanks, different dry-milling block materials | | Software for milling path generation CAM software: | Ceramill Match 2 | | Is there an undercut on the inside and outside of the scaffolding?: | yes, always on the inside of crowns and bridges with undercuts; telescopes and abutments can also be milled this way; optional: height optimization | | Is it possible to tilt the blank without changing the scaffolding alignment to save material?: | yes, possible in all axes, height optimization | | Interface to CAD software: | open to open STL files | | Recommended retail price of the manufacturer milling unit / CAM software: | upon request | | Service telephone / information: | Ceramill Helpdesk: DE: +49 72 31 / 957 300, INT: +43 55 23 / 62 333 300 |
The Ceramill Mikro 5x 5-axis machining machine can handle a wide range of complex cases using dry machining materials, not only crowns and bridges, but also splints, bars and implant bridges.
Based on the compact design of Ceramill Mikro 4x, which has excellent equipment robustness and stability, we have added the machining performance of 5-axis machining. Our unique control technology reduces vibration during processing, making it possible to process restorations with even higher precision.
The Ceramill Mikro 5x’s faster processing, high quality and adaptability to a wide range of applications and diverse materials result in high productivity and make you a real winner.●Using Amann Girrbach’s proprietary cutting-edge processing technology, we are able to produce highly accurate and well-fitting restorations.●A 5-axis dry processing machine that can be used for a wide range of purposes such as blanks and hybrid resin blocks.●Excellent cost performance due to low investment cost and high productivity.●The high-quality component structure and sturdy design provide both high processing performance and excellent durability.To make the prosthesis designed by the software, the obtained information must be sent to the milling machine so that the necessary work for turning it can be done by the CAM software and the milling machine. After cutting, the desired prosthesis is painted and then baked in a dental furnace to obtain a uniform and stable color, and finally, after testing and ensuring its suitability, it is glued with cement. | Soredex Cranex-D Panoramic X Ray
The Soredex Cranex D with cephalometric option provides a full range of digital panoramic and cephalometric dental x-ray examinations to meet the diagnostic needs of almost any general dental or specialty practice. With it’s minimal footprint, this Soredex option will help elevate the diagnostic functionality of any dental provider.Soredex Cranex D provides a full range of high quality digital panoramic x-ray examinations to meet the diagnostic needs of almost any dental practice – all at an affordable price.Acquisition computer includedFeatures Soredex Cranex-D Panoramic X Ray
CRANEX D is a direct digital panoramic and cephalometric x-ray system that provides superior image quality and more diagnostic value. Available as a single or dual sensor system, the CRANEX D grows with your practice, making it a valuable addition to meet the needs of your office. It combines quality images, ease-of-use, and flexibility to make your day-to-day diagnostics easy and accurate. Benefits
The system features superb anterior image quality in panoramic imaging with its patented Variable Panoramic Collimator (VPC) by expanding the focal trough by 50% compared to traditional techniques. Additional innovative features on the unit include Automatic Collimator Selector (ACS) to easily set proper collimation for the imaging program prescribed, as well as the Automatic Exposure Setting (AES) where the system recommends proper cephalometric exposure values based on the size of the patient. These automated and optimized exposure settings maximize the practice’s workflow. CRANEX D is built for contemporary, fast-paced dental care where reliability is key.The Soredex Cranex D with cephalometric option provides a full range of panoramic and cephalometric examinations to meet the needs of almost any practice.SOREDEX has over 30 years of expertise in state-of-the-art dental imaging systems. The Soredex® Cranex D with cephalometric option provides a full range of panoramic and cephalometric examinations to meet the needs of almost any practice. | SuniRay 2 Digital Intraoral Sensor Size 1 and Size 2
X-Ray Imaging Properties- Resolution: The pixel resolution of the high resolution (HiRes) sensors exceeds 15 lp/mm. The standard resolution of an X-Ray image, as measured by the modulation transfer function (MTF) exceeds 12 lp/mm. This is measured by using a standard 60 kV intraoral X-ray source.
- Does Efficiency: The sensor will produce a high quality image with an X-Ray dose that is only a fraction of the standard dose required by Dental X-Ray film.
- Diagnostic Efficacy: The system will produce a superior image quality of images obtained when using standard dental X-Ray film. This allows the dentist to diagnose standard intraoral pathologies encountered during screening procedures.
- Wide dynamic range: The sensor pixel well capacity is very high, allowing a higher accommodation of greyscale (bone density) dynamic range.
Sensor Material Biocompatibility SpecificationsThe sensor’s body material and cable material are biocompatible. The sensors and all component materials have been tested to comply with ISO standards, and specifically, the sensor complies with EN IS0-10993 (Biological Evaluation of Medical Devices). | Technical data | Size 1 | Size 2 |
|---|
| Sensor Dimensions (mm) | 39.5 x 26 | 43.5 x 31.5 |
|---|
| Active Area (mm) | 31.1 x 20.2 | 35.2 x 26.2 |
|---|
| Sensor Technology | CMOS APS Fiber Plate | CMOS APS Fiber Plate |
|---|
| Maximum Gray Levels | 4096 | 4096 |
|---|
| Sensor Cable | 3 feet (1m) | 3 feet (1m) |
|---|
| Cable Attachment | Reinforced Strain Relief | Reinforced Strain Relief |
|---|
| USB Module | Integrated USB 2.0 Module | Integrated USB 2.0 Module |
|---|
| Software | Prof. Suni | Prof. Suni |
|---|
X-Ray Imaging Properties SuniRay 2 Digital Intraoral Sensor Size 1 and Size 2- Resolution: The pixel resolution of the high resolution (HiRes) sensors exceeds 15 lp/mm. The standard resolution of an X-Ray image, as measured by the modulation transfer function (MTF) exceeds 12 lp/mm. This is measured by using a standard 60 kV intraoral X-ray source.
- Does Efficiency: The sensor will produce a high quality image with an X-Ray dose that is only a fraction of the standard dose required by Dental X-Ray film.
- Diagnostic Efficacy: The system will produce a superior image quality of images obtained when using standard dental X-Ray film. This allows the dentist to diagnose standard intraoral pathologies encountered during screening procedures.
- Wide dynamic range: The sensor pixel well capacity is very high, allowing a higher accommodation of greyscale (bone density) dynamic range.
| Roland DWX-51D Dental Milling Unit
Roland DWX-51D Integrated HD Mill Package
DWX-51D 5-Axis Dental Mill
High Definition Custom CAM Strategy SUM3D
Nabertherm High Speed Auto Cool Zi Furnace
Quatro IVAC Mill Suction
Integration Package for Implant Abutments
Integration Package for up to 60mm disc sizes
Integration Package for HD High Detail End Mills
Start Up Package for Milling Materials
Top To Bottom Mill Training by the Industry Experts
Equipment Set up, IT and Networking Included
Mill Contingency and Loaner ProgramBuilt-to-Last
For thirty years, Roland DG has been the trusted provider of milling machines that are built to last. The DWX-51D 5-Axis Dental Milling Machine is no exception. After extensive research in which lab technicians were asked what they needed in a production mill, the DWX-51D was developed to enhance user experience, maximize ease-of-use and improve output quality. Built with a simple and modern design, the DWX-51D looks as effortless as it operates.Features
5-axis simultaneous operation for non-stop precision milling
Sturdy and efficient ball screw-driven system
New C-clamp for easy adjustment and alignment
10-station Automatic Tool Changer (ATC) for continuous milling
Powerful vacuum and anti-static ionizer for clean calibration and dust reductionThe DWX-51D is designed for effortless, precision production of dental prosthetics fromcopings, crowns and bridges to inlays, onlays and abutments, etc. With a host of automated features and a clean, stable work environment, the DWX-51D is the perfect solution for labs wanting to increase production or those looking to get into digital milling for the first time.Built-for-You.Built-to-Last.For thirty years, Roland DG has been the trusted provider of milling machines that are built to last. The DWX-51D 5-Axis Dental Milling Machine is no exception. After extensive research in which lab technicians were asked what they needed in a production mill, the DWX-51D was developed to enhance user experience, maximize ease-of-use and improve output quality. Built with a simple and modern design, the DWX-51D looks as effortless as it operates. Distinguishing Features Roland DWX-51D Dental Milling Unit- 5-axis simultaneous milling for precision milling
- Steady and efficient ball screw-driven operation
- New C-shape clamp for easy adjustment and alignment
- 10-station Automatic Tool Changer (ATC) for continuous milling
- Powerful vacuum and anti-static ionizer for clean calibration and dust reduction
Ultimate Convenience and Ease-of-Use- A variety of new features ensure continuous, user-friendly milling, including
- Sturdy frame ensures stability, while slim design fits nearly any lab space
- Easy access tool drawer properly stores and protects tools
- Color-coded LED status lights signal current job progress
- Virtual Machine Panel (VPanel) allows users to configure settings from their computer, send CAM data to the DWX-51D for production, and track milling progress
- Easily accessible cutting area for simple tool replacement and cleaning
| XIOS scan Sirona
XIOS Scan. Small change. Big impact.
The XIOS scan provides a gentle, easy introduction into the world of digital X-ray imaging. If you want to switch from film to digital without having to give up your tried-and-true working methods, imaging plate technology offers you a myriad of possibilities. You can experience many of the advantages of digital imaging without a darkroom and chemicals while your team continues its regular workflow. XIOS Scan completes the family of intraoral X-ray systems from Sirona which includes the sensors XIOS XG and the intraoral X-ray HELIODENTPLUS source.
Tried-and-true workflow meet the advantages of digital imaging
Outstanding scan quality with 22 line pairs/mm
Scratch-free scanning and automatic film detection
Proven Sirona quality “Made in Germany”Technical data
XIOS Scan
Dimensions (H x W x D) 363 mm x 163 mm x 286 mm
Weight 7.3 kg ± 0.5 kg
Pixel size selectable 23/30 μm
Resolution 22/17 Lp/mm
Interface LAN
Dimensions
Storage plate intraoral
Size 0 31 mm x 22 mm
Size 1 24 mm x 40 mm
Size 2 31 mm x 41 mm
Size 3 27 mm x 54 mmSmall Change. Big Impact.Xios Scan provides a gentle, easy introduction into the world of digital X-ray imaging. If you want to switch from film to digital without having to give up your tried-and-true working methods, imaging plate technology offers you a myriad of possibilities. You can experience many of the advantages of digital imaging without a darkroom and chemicals while your team continues its regular workflow.The Xios Scan integrates seamlessly with the Dentsply Sirona X-ray units and software to deliver better, safer and faster intraoral diagnostics.For the best digital image quality and the easiest workflowXios Scan works at an outstanding resolution of up to 22 line pairs/mm (theoretical resolution). The result is exceptionally sharp and detailed images - ideal conditions for an accurate diagnosis. The images are transmitted directly to Sidexis 4, Dentsply Sirona Imaging's software, where they can then be further evaluated and diagnosed. The software provides simple controls for later editing of the visual impression of the X-ray in terms of sharpness, brightness and contrast. | Roland DWX-4W Dental Milling Unit
Reliable High PerformanceIn addition to milling on X, Y and Z axes, the DWX-4W rotates pin-type blocks 360 degrees on a fourth axis (A axis) to support undercuts. The ball screw-driven 4-axis control allows for smooth, high-precision machining. The DWX-4W’s high-performance 60,000-RPM Jaeger spindle is known for its reliability and supports precision milling of glass ceramics and composite resin. With its multi-pin clamp, the DWX-4W is a wet dental milling machine that can mill up to three different pin-type materials continuously in one operation. As a result, prosthetics for up to three different patients can be produced in a single production run, saving time, labour and costs.- Simultaneous 4-axis machining
- 4-state Automatic Tool Changer (ATC)
- 60,000 RPM Jaeger DentaDrive Spindle
- CAM software bundled
- Virtual Machine Panel (VPanel)
- Fully-integrated water and coolant filtration system
- Coolant leakage & flow monitoring sensors
- Tool life monitoring
- Mail notification system
Summary Roland DWX-4W Dental Milling Unit• Maximum Convenience
• Virtual Machine Panel
• Progress and Error Alerts for Error-Free Milling
• Coolant Compartment and Water Filtration
• Clean Cutting Area for Precision Milling
• Economical Open Architecture
• CAM Software Included
• Growth Potential
• Peace of MindThe DWX-4W’s high-performance 60 000 RPM Jaeger DentaDrive spindle supports precision milling. It’s equipped to mil pin-type blocks, including glass ceramics and composite resin – acclaimed in the industry for their superior strength and aesthetics. materials can be finished with a short finishing tome, dramatically reducing labour and production time.In addition to milling on X, Y and Z axes, the DWX-4W rotates pin-type blocks 360 degrees on a fourth axis (A axis) to support undercuts, the rigid ball screw-driven 4-axis control allows for smooth, high-precision machining. With its multi-pin clamp, it can mil up to three different pin-type materials continuously, enabling production three different patient prosthetics in a single production run. it also features an Automatic Tool Changer (ATC) that auto-changes grinding burs without interrupting the production process. |
Reviews
There are no reviews yet.