Ceramill Mikro 5x have a maximum precision, future-security and full inhouse control due to maximum material and indication diversity form the basis of the ceramill® machine concept.
Splints, bars, implant bridges – the 5-axis unit Ceramill Mikro 5X not only masters conventional crown and bridge work but was also designed for fabricating more complex indications with dry millable materials.
The high rigidity and stability of the machine are based on the compact construction design of the sister model Ceramill Mikro 4X, without having to forego the advantages of 5-axis technology. The result is absolutely low-vibration processing, which in combination with Ceramill control technology produces impressive precision on the blank.
Fast processing times, maximum quality and a wide range of indications and materials make the Ceramill Mikro 5X a genuine winner in the laboratory in terms of productivity. The result is a material processing process with maximum vibration reduction, which, combined with the innovative Ceramill control technology, gives the highest degree of precision when machining the block. Short processing times, highest quality and a wide range of indications and materials make Ceramill Mikro 5X, in terms of performance, a real winner among devices in the prosthetic laboratory.
The Ceramill Mikro 5X is a 5-axis machine capable of not only handling traditional crown and bridge procedures, but is also designed for the production of more complex products on dry friable materials. The high rigidity and stability of the machine is based on the compact design of the Ceramill Mikro 4X model. The result is an absolutely low-vibration machining that, combined with Ceramill control technology, ensures impressive precision during operation.
Benefits Ceramill Mikro 5x
High performance thanks to DNA milling strategies
Maximum range of indications in 5-axis dry milling
Space-saving, compact design with the latest 5-axis technology
Fast, stable and efficient thanks to low-vibration monocoque design
High-quality machine components guarantee constantly high precision and durability
Important Features Ceramill Mikro 5x
Milling unit for using entry into the world of CAD/CAM in-House production.
Option to purchase an additional holder 71 for 3 pieces of composite blocks intended for dry milling.
During milling, there are minimal vibration, and therefor an absolutely precise result of the prosthetic work is produced.
The milling machine is equipped with a holder 8 cutters with automatic tool change.
Advantage and benefits Ceramill Mikro 5x
Holder for 8 cutters with automatic tool change.
Open system.
Additional 71 for 3 pieces of composite blocks intended for dry milling.
It is an open system accepting .stl format for easy entry into the world in-House CAD/CAM production.
These materials can be milled
Zircons.
Plastics for dry milling.
Waxes.
Presintered metal (Sintron).
Hybrid materials.
Technical parameters
Axes: 5
Processing mode: Dry
Tool management: 8-compartment tool changer, management of replacement tools
a) Milling cutter magazine with eight tool positions including sister tool positions for automatic tool changing b) manually exchangeable holders and adapters for milling blocks
Tool change:
automatically, during machining the machine switches between roughing and finishing tools, worn milling cutters are replaced with sister tools
Workpiece change:
manually
Dimensions of the blank shapes that can be used:
Dental arch shape in different heights, 98 mm blanks, different dry-milling block materials
Software for milling path generation CAM software:
Ceramill Match 2
Is there an undercut on the inside and outside of the scaffolding?:
yes, always on the inside of crowns and bridges with undercuts; telescopes and abutments can also be milled this way; optional: height optimization
Is it possible to tilt the blank without changing the scaffolding alignment to save material?:
yes, possible in all axes, height optimization
Interface to CAD software:
open to open STL files
Recommended retail price of the manufacturer milling unit / CAM software:
The Ceramill Mikro 5x 5-axis machining machine can handle a wide range of complex cases using dry machining materials, not only crowns and bridges, but also splints, bars and implant bridges.
Based on the compact design of Ceramill Mikro 4x, which has excellent equipment robustness and stability, we have added the machining performance of 5-axis machining. Our unique control technology reduces vibration during processing, making it possible to process restorations with even higher precision.
The Ceramill Mikro 5x’s faster processing, high quality and adaptability to a wide range of applications and diverse materials result in high productivity and make you a real winner.
●Using Amann Girrbach’s proprietary cutting-edge processing technology, we are able to produce highly accurate and well-fitting restorations.
●A 5-axis dry processing machine that can be used for a wide range of purposes such as blanks and hybrid resin blocks.
●Excellent cost performance due to low investment cost and high productivity.
●The high-quality component structure and sturdy design provide both high processing performance and excellent durability.
To make the prosthesis designed by the software, the obtained information must be sent to the milling machine so that the necessary work for turning it can be done by the CAM software and the milling machine. After cutting, the desired prosthesis is painted and then baked in a dental furnace to obtain a uniform and stable color, and finally, after testing and ensuring its suitability, it is glued with cement.
Reviews (0)
Reviews
There are no reviews yet.
Be the first to review “Ceramill Mikro 5x Dental Milling Machine” Cancel reply
Ceramill Mikro 5x Dental Milling Machine●Using Amann Girrbach’s proprietary cutting-edge processing technology, we are able to produce highly accurate and well-fitting restorations.●A 5-axis dry processing machine that can be used for a wide range of purposes such as blanks and hybrid resin blocks.●Excellent cost performance due to low investment cost and high productivity.●The high-quality component structure and sturdy design provide both high processing performance and excellent durability.
SuniRay 2 achieves maximal image quality with superior diagnostic capabilities while maintaining the lowest radiation levels among all digital sensors. The comprehensive and feature-rich Prof. Suni Advanced Imaging Software supplements the SuniRay 2’s high-quality imaging with a wide array of user-friendly customization and image-enhancement tools. With the SuniRay 2, Suni has created a complete digital radiography system that seamlessly integrates with your entire practice.
From general to littles, this machine has you covered. This digital system excels at both general and pediatric practices, with great strengths in cosmetic dentistry and orthodontics as well.
iRay D4 has made life easy for the dental professionals around the world. Dental digital radiography is one of the current armamentarium which has polished the quality of dental treatment procedures. Portable IRAY D4 is now ready to replace the previous versions of intraoral cameras.
iTero HD2.9 simply allows to digitally scan a prepared tooth and wirelessly send this information directly to the dental laboratory for fabrication of a CAD/CAM crown without the gooey mess.
A true open architecture system, the compact DWX-50 integrates with industry standard 3D scanners, computers and all popular CAD/CAM software to provide a very cost-effective production solution. Advanced communications tools and operating features allow the DWX-50 to mill unattended while providing confidence in the finished product to the lab technician.
Content
Ceramill Mikro 5x Dental Milling Machine
Ceramill Mikro 5x have a maximum precision, future-security and full inhouse control due to maximum material and indication diversity form the basis of the ceramill® machine concept.Splints, bars, implant bridges – the 5-axis unit Ceramill Mikro 5X not only masters conventional crown and bridge work but was also designed for fabricating more complex indications with dry millable materials.The high rigidity and stability of the machine are based on the compact construction design of the sister model Ceramill Mikro 4X, without having to forego the advantages of 5-axis technology. The result is absolutely low-vibration processing, which in combination with Ceramill control technology produces impressive precision on the blank.Fast processing times, maximum quality and a wide range of indications and materials make the Ceramill Mikro 5X a genuine winner in the laboratory in terms of productivity. The result is a material processing process with maximum vibration reduction, which, combined with the innovative Ceramill control technology, gives the highest degree of precision when machining the block. Short processing times, highest quality and a wide range of indications and materials make Ceramill Mikro 5X, in terms of performance, a real winner among devices in the prosthetic laboratory.The Ceramill Mikro 5X is a 5-axis machine capable of not only handling traditional crown and bridge procedures, but is also designed for the production of more complex products on dry friable materials. The high rigidity and stability of the machine is based on the compact design of the Ceramill Mikro 4X model. The result is an absolutely low-vibration machining that, combined with Ceramill control technology, ensures impressive precision during operation.
Benefits Ceramill Mikro 5x
High performance thanks to DNA milling strategies
Maximum range of indications in 5-axis dry milling
Space-saving, compact design with the latest 5-axis technology
Fast, stable and efficient thanks to low-vibration monocoque design
High-quality machine components guarantee constantly high precision and durability
Important Features Ceramill Mikro 5x
Milling unit for using entry into the world of CAD/CAM in-House production.
Option to purchase an additional holder 71 for 3 pieces of composite blocks intended for dry milling.
During milling, there are minimal vibration, and therefor an absolutely precise result of the prosthetic work is produced.
The milling machine is equipped with a holder 8 cutters with automatic tool change.
Advantage and benefits Ceramill Mikro 5x
Holder for 8 cutters with automatic tool change.
Open system.
Additional 71 for 3 pieces of composite blocks intended for dry milling.
It is an open system accepting .stl format for easy entry into the world in-House CAD/CAM production.
These materials can be milled
Zircons.
Plastics for dry milling.
Waxes.
Presintered metal (Sintron).
Hybrid materials.
Technical parameters
Axes: 5
Processing mode: Dry
Tool management: 8-compartment tool changer, management of replacement tools
a) Milling cutter magazine with eight tool positions including sister tool positions for automatic tool changing b) manually exchangeable holders and adapters for milling blocks
Tool change:
automatically, during machining the machine switches between roughing and finishing tools, worn milling cutters are replaced with sister tools
Workpiece change:
manually
Dimensions of the blank shapes that can be used:
Dental arch shape in different heights, 98 mm blanks, different dry-milling block materials
Software for milling path generation CAM software:
Ceramill Match 2
Is there an undercut on the inside and outside of the scaffolding?:
yes, always on the inside of crowns and bridges with undercuts; telescopes and abutments can also be milled this way; optional: height optimization
Is it possible to tilt the blank without changing the scaffolding alignment to save material?:
yes, possible in all axes, height optimization
Interface to CAD software:
open to open STL files
Recommended retail price of the manufacturer milling unit / CAM software:
The Ceramill Mikro 5x 5-axis machining machine can handle a wide range of complex cases using dry machining materials, not only crowns and bridges, but also splints, bars and implant bridges.
Based on the compact design of Ceramill Mikro 4x, which has excellent equipment robustness and stability, we have added the machining performance of 5-axis machining. Our unique control technology reduces vibration during processing, making it possible to process restorations with even higher precision.
The Ceramill Mikro 5x’s faster processing, high quality and adaptability to a wide range of applications and diverse materials result in high productivity and make you a real winner.●Using Amann Girrbach’s proprietary cutting-edge processing technology, we are able to produce highly accurate and well-fitting restorations.●A 5-axis dry processing machine that can be used for a wide range of purposes such as blanks and hybrid resin blocks.●Excellent cost performance due to low investment cost and high productivity.●The high-quality component structure and sturdy design provide both high processing performance and excellent durability.To make the prosthesis designed by the software, the obtained information must be sent to the milling machine so that the necessary work for turning it can be done by the CAM software and the milling machine. After cutting, the desired prosthesis is painted and then baked in a dental furnace to obtain a uniform and stable color, and finally, after testing and ensuring its suitability, it is glued with cement.
SuniRay 2 Digital Intraoral Sensor Size 1 and Size 2
X-Ray Imaging Properties
Resolution: The pixel resolution of the high resolution (HiRes) sensors exceeds 15 lp/mm. The standard resolution of an X-Ray image, as measured by the modulation transfer function (MTF) exceeds 12 lp/mm. This is measured by using a standard 60 kV intraoral X-ray source.
Does Efficiency: The sensor will produce a high quality image with an X-Ray dose that is only a fraction of the standard dose required by Dental X-Ray film.
Diagnostic Efficacy: The system will produce a superior image quality of images obtained when using standard dental X-Ray film. This allows the dentist to diagnose standard intraoral pathologies encountered during screening procedures.
Wide dynamic range: The sensor pixel well capacity is very high, allowing a higher accommodation of greyscale (bone density) dynamic range.
Sensor Material Biocompatibility SpecificationsThe sensor’s body material and cable material are biocompatible. The sensors and all component materials have been tested to comply with ISO standards, and specifically, the sensor complies with EN IS0-10993 (Biological Evaluation of Medical Devices).
Technical data
Size 1
Size 2
Sensor Dimensions (mm)
39.5 x 26
43.5 x 31.5
Active Area (mm)
31.1 x 20.2
35.2 x 26.2
Sensor Technology
CMOS APS Fiber Plate
CMOS APS Fiber Plate
Maximum Gray Levels
4096
4096
Sensor Cable
3 feet (1m)
3 feet (1m)
Cable Attachment
Reinforced Strain Relief
Reinforced Strain Relief
USB Module
Integrated USB 2.0 Module
Integrated USB 2.0 Module
Software
Prof. Suni
Prof. Suni
X-Ray Imaging Properties SuniRay 2 Digital Intraoral Sensor Size 1 and Size 2
Resolution: The pixel resolution of the high resolution (HiRes) sensors exceeds 15 lp/mm. The standard resolution of an X-Ray image, as measured by the modulation transfer function (MTF) exceeds 12 lp/mm. This is measured by using a standard 60 kV intraoral X-ray source.
Does Efficiency: The sensor will produce a high quality image with an X-Ray dose that is only a fraction of the standard dose required by Dental X-Ray film.
Diagnostic Efficacy: The system will produce a superior image quality of images obtained when using standard dental X-Ray film. This allows the dentist to diagnose standard intraoral pathologies encountered during screening procedures.
Wide dynamic range: The sensor pixel well capacity is very high, allowing a higher accommodation of greyscale (bone density) dynamic range.
Soredex Cranex-D Panoramic X Ray
The Soredex Cranex D with cephalometric option provides a full range of digital panoramic and cephalometric dental x-ray examinations to meet the diagnostic needs of almost any general dental or specialty practice. With it’s minimal footprint, this Soredex option will help elevate the diagnostic functionality of any dental provider.Soredex Cranex D provides a full range of high quality digital panoramic x-ray examinations to meet the diagnostic needs of almost any dental practice – all at an affordable price.Acquisition computer included
Features Soredex Cranex-D Panoramic X Ray
CRANEX D is a direct digital panoramic and cephalometric x-ray system that provides superior image quality and more diagnostic value. Available as a single or dual sensor system, the CRANEX D grows with your practice, making it a valuable addition to meet the needs of your office. It combines quality images, ease-of-use, and flexibility to make your day-to-day diagnostics easy and accurate.Benefits
The system features superb anterior image quality in panoramic imaging with its patented Variable Panoramic Collimator (VPC) by expanding the focal trough by 50% compared to traditional techniques. Additional innovative features on the unit include Automatic Collimator Selector (ACS) to easily set proper collimation for the imaging program prescribed, as well as the Automatic Exposure Setting (AES) where the system recommends proper cephalometric exposure values based on the size of the patient. These automated and optimized exposure settings maximize the practice’s workflow. CRANEX D is built for contemporary, fast-paced dental care where reliability is key.The Soredex Cranex D with cephalometric option provides a full range of panoramic and cephalometric examinations to meet the needs of almost any practice.SOREDEX has over 30 years of expertise in state-of-the-art dental imaging systems. The Soredex® Cranex D with cephalometric option provides a full range of panoramic and cephalometric examinations to meet the needs of almost any practice.
Dexcowin IRay D4 Dental Handheld X-Ray System
Dexcowin’s iRay D4 is a total dental imaging solution. The iRay D4 comes with an attachable digital sensor, a built in computer for image processing and a 4.8” digital screen so you can see your radiographs live. Diagnosis with a single machine, completely safe and mobile allows imaging on the go. The iRay D4 works with film, digital sensors and PS (photostimulable phosphor) plates. The iRay D4 is wireless, handheld, and completely mobile thus eliminating the need for designated X-ray machine rooms.Dexcowin’s iRay D4 is an all in one solution. It is an x-ray source, a computer, and comes with a high-quality sensor. The iRay D4 can be used as a simple x-ray source when used with film or a sensor attached to a separate computer.The iRay D4 is wireless, handheld, and completely mobile thus eliminating the need for designated X-ray machine rooms. The iRay D4 is perfect for the endodontic who need to surgical procedures in process or mobile dentist practicing in remote locations without computer access.Safety* Safe to hold by hand. 1/7 the radiation exposure then conventional systems.
* Rechargeable Li-poly batteries allow up to 300 images on a single charge.
* Works with any radiographic medium: film, digital sensor, PS plates.
* Operator Safe: Certified as SAFE TO USE BY HANDMobility* The iRay D4 is a complete mobile system. It has an on board computer and a 4.8” screen that allows the doctor to take analyze X-rays with a single piece of equipment.
* There is no need for additional equipment as the iRay D4 comes complete with a high definition sensor.
* The iRay D4 is the most mobile and independent solution on the market today.
* The iRay D4 comes with two rechargeable Li-poly batteries with up to 300 shots on a single charge.
* The iRay D4 also includes wireless transfer to your PC, now take and view your X-rays anywhere!Quality* The iRay D4 gives you more for less than conventional systems. The iRay D4 does not need special construction in terms of shielded rooms, chemical development and dedicating rooms for X-ray.
* The iRay D4 does not require special technical equipment such as computers and additional sensors thereby providing quality all-in-one equipment.
* It allows you to take an x-ray in real time, while you are in the room. This allows the practitioner to provide his customer face to face reassurance while the X-rays and images are taken.Still not convinced? We also offer a 5-jointed stand arm for which you can mount the iRay D systems. Comes fixated to a mobile cart so you still preserve the portable characteristics of the iRay system. With an included remote control, satisfy any operator who still feels uneasiness with being in the same room as an X-ray machine.Digital X-ray Specifications:Dexcowin IRay D4 Dental Handheld X-Ray SystemProduct Name : iRay D4
CPU : 1.6GHz
DISPLAY : 4.8”Touch Panel TFT-LCD (1024×600)
MEMORY : 16GB
EXPOSURE : 0.05 ~ 1.35, 0.01 step
BATTERY : rechargeable 4 cell high capacity battery pack
INTERFACE : USB2.0
Tube Voltage : 60kV(fixed)
Tube Current : 2mA(Fixed)
Focal Spot Size : 0.8mm
Voltage Consumption : 240W Max
Cooling Method : Oil Cooling
Total Filtering : Over 1.5mmAl (inherent filtration : 0.8mmAl, fixed type added filter : 0.7mmAl)
Target Angle : 20°
Time Setting Function : 0.05 ~ 1.35 second (0.01 step)
Main Body Size : 240(L) x 166(W) x 82(H) [mm]
Main Body Weight : 2.4kg
Battery Pack : Cell Material Quality Lithium Polymer
Charging Condition : Charging Current 1A
Temperature Range : 0~40°C
Maximum Current : 18A
Out Voltage : DC 15V
Temperature Range : -20 ~ 60°C
iTero HD2.9 simply allows to digitally scan a prepared tooth and wirelessly send this information directly to the dental laboratory for fabrication of a CAD/CAM crown – without the gooey mess. The wireless transmission saves shipping time and eliminates distortion that can often be found with traditional stone modelsThe digital scan is, quite literally, digitally perfect. We then deliver the digital scan to our lab where a precision fitting restoration is created.iTero HD2.9 system eliminated the uncomfortable patient experience of traditional impressions, utilizes advanced state of the art digital technology, and provides with superior fitting restorations with little or no adjustmentsiTero Intra-Oral Scanner
Model: HD2.9
2014 Date of Mfg.
Brochure/Video: Click Here
Limited Use
Includes:
iTero Software (pre-loaded)
90 Day Parts Warranty
User Manual(s)
Free Standard Shipping (Commercial USA Addresses)
Its ergonomic design comes with safe docking station. It has thin fiber optic cable which enables quick data transfer from the wand to the cart. This optimized cable length assists various cart positions in the operatory.Orthodontic treatment is more than just straightening teeth; it’s about ensuring your teeth and jaws are in alignment. To achieve this, we need to get an accurate look at where your teeth are positioned. To do this, we use the iTero Intraoral digital scanner.A good impressionIn the orthodontic and dental industries, ‘impressions’ is the term we use for getting a good picture of where your teeth currently sit. These impressions were previously taken using a type of dental cement. Pasted on your teeth, patients were required to lie for a few minutes while the cement-like material set. The dental professional could then remove the set material which had formed an ‘impression’ of your teeth.This process was messy, rather unpleasant and not very comfortable. Fortunately, that method is a thing of the past. These days, we use scanning technology and at L&L Orthodontics, our technology of choice is the iTero Intraoral digital scanner.
What is the iTero scanner?
The iTero scanner is new 3D orthodontic scanning technology. Using the latest developments in intraoral scanning, the iTero scanner accurately scans your teeth as part of your orthodontic assessment. The iTero scanner is made up of a small, wand-like device which is used to scan your teeth and jaws. The data it is collecting then appears on the computer screen, allowing you to see the ‘impressions’ the scanner is taking.The iTero scanner works in with Invisalign®* treatment and lets you see what your teeth will look like post-treatment, even before you’ve started. Before we recommend a course of treatment for you, we’ll take impressions of your teeth using the iTero scanner to ensure we are making our recommendation on accurate information.To find out more about the iTero scanner and other orthodontic technology we use here at L&L Orthodontics, book your specialist consultation today.
The compact DWX-50 combines 5-axis simultaneous machining capability and a five-station automatic tool changer to deliver advanced features at a very affordable price point. Designed specifically for dental labs and technicians, the user-friendly DWX-50 allows for clean, quiet operation and the quality production of complex dental arches, abutments, bridges, copings and crowns from zirconia, wax and PMMA. Equipped with an integrated air blower and dust collection system, the DWX-50 ensures protection of moving parts while maintaining a clean, safe environment. Built on open technology, the DWX-50 supports a wide range of industry standard CAD/CAM software and tools, allowing for easy integration with popular commercially available dental prosthetic production solutions.5-axis simultaneous machiningCapable of 5-axis simultaneous machining, the DWX-50 supports the production of high-quality dental prosthetics at an affordable price point. The DWX-50 is designed to mill on X, Y and Z axes, rotating blocks and discs of material 360 degrees in both clockwise and counterclockwise movements, as well as tilting materials forward and backward 20 degrees to support complex cuts.Five-station automatic tool charger Roland DWX-50 5-Axis Dental Milling MachineThe five-station Automatic Tool Changer (ATC) with a tool length sensor enables the user to run multiple tools for one job or an entire disc unattended. Instead of inspecting finished pieces to determine if everything was milled correctly, the integrated tool diagnostics feature will notify users if a tool was broken prior to completion, resulting in reduced time and wasted materials.Taking control of prosthesis productionWith its unmatched ease of use and short learning time, the DWX-50 provides a cost-effective solution that is ideal for dental labs wishing to take control of the production process while avoiding the long lead times and costs associated with outsourcing.A true open architecture system, the compact DWX-50 integrates with industry standard 3D scanners, computers and all popular CAD/CAM software to provide a very cost-effective production solution. Advanced communications tools and operating features allow the DWX-50 to mill unattended while providing confidence in the finished product to the lab technician.
Reviews
There are no reviews yet.