| Description | Programat CS4 is the ideal sintering, crystallisation and glazing furnace for dental practices. | Image Quality
According to DEXIS, their digital xray system provides detailed image quality and includes image enhancement tools that increase diagnostic capabilities. When the 9 evaluators were asked to rate the system’s image quality and enhancement aids, 89% rated them as excellent to very good. One of the evaluators commented that the system’s “ClearVu and image magnification allow us to diagnose very effectively.”Overall Satisfaction
When asked to rate their overall satisfaction with the DEXIS Digital X-ray System, 89% of the evaluators rated it as excellent to very good. Commented one evaluator, “DEXIS has been very responsive to our needs.” | The DWX-4W goes beyond dry milling and is the epitome of wet grinding technology. It uses 4-axis simultaneous movements to wet grind precision inlays, onlays, crowns, veneers and short-span bridges from glass ceramic and composite resins. | At only 4.2 pounds, the portable x-ray, is considered to be the lightest x-ray generator on the market. Many design features are included with an LCD Display, and High Frequency Tube, a perfect balance of technology and simplicity. There is no doubt that the EXARO is the best, handheld and portable x-ray, available. | The DWX-51D 5-Axis Dental Milling Machine is designed for effortless production of dental prosthetics. Built for precision, error-free milling, you don’t need any machine expertise to operate it. With touch-button controls and automated milling features, the production of high-quality bridges, crowns, inlays, onlays, abutments and other restorations out of 98 mm discs and blocks has been made virtually foolproof. | Economical pressing and firing performance. Top quality results. |
| Content | Ivoclar Vivadent Programat CS4Ivoclar Vivadent Programat CS4 is a compact multifunction furnace for dental practices. It is designed for sintering zirconia restorations, e.g. IPS e.max ZirCAD, using a temperature of up to 1,600°C. The furnace can also be employed as a glazing and crystallisation furnace for IPS e.max CAD and IPS Empress CAD restorations. The speed sintering program allows zirconia restorations to be manufactured directly in the dental practice in a single session.
A clearly arranged membrane-sealed keypad with graphic display enables easy operation. Both pre-set and individual programs for third-party materials are available. Programat CS4 is a stand-alone furnace that features an open system.Ivoclar Vivadent Programat CS4 Advantages:- Fast sintering of IPS e.max ZirCAD
- Crystallisation of IPS e.max CAD
- Glaze program for IPS e.max ZirCAD, IPS e.max CAD and IPS Empress CAD
- High processing capacity (up to six units)
- Open system
- Simple and language-independent operation due to the proven combination of membrane-sealed keypad and graphic display
- Power Saving Technology
- Compact design
- Possibility of on-site temperature calibration
- OSD (Optical Status Display)
- Remote control via PC/laptop by means of PrograBase3 software
Ivoclar Vivadent Programat CS4 Key features- The firing chamber can be heated up to 1600 ° C;
- The electronics with the corresponding software controls the sintering program;
- There is a constant comparison between the actual and the set temperature;
- The sintering table can accommodate up to 6 single restorations at the same time
Ivoclar Vivadent Programat CS4 Features of the model- Fast sintering process (it is possible to manufacture ZrO2 restorations in one medical appointment, maximum – six units at a time);
- Glaze firing and crystallization (cost-saving, as usually different furnaces, are required for sintering, glaze firing, and crystallization);
- Precise temperature (precise temperature control for glaze firing, crystallization, and sintering).
Ivoclar Vivadent Programat CS4 Application- Sintering and glazing of ZrO 2 materials (eg IPS e.max ZirCAD);
- Crystallization and glazing (e.g. IPS e.max CAD).
- The Programat CS4 cannot be used as a ceramic kiln for ceramics in the dental laboratory.
Specifications Ivoclar Vivadent Programat CS4- Power supply: 118-240 V / 50-60 Hz
- Overvoltage category: II
- Pollution degree: 2
- Allowable voltage fluctuations: + – 10%
- Maximum current consumption: 16A @ 118V, 8A @ 240V
- Electrical fuses: 250 V / T 16 A (heating element)
- Fuse size: diameter 5 x 20 mm
- Closed oven dimensions: depth – 430 mm, width – 310 mm (with stand – 390 mm), height – 570 mm
- Useful chamber volume: diameter – 80 mm, height – 80 mm
- Maximum firing temperature: 1600 ° C
- Weight: bottom 10 kg, furnace head 17 kg
Equipment- The lower part of the oven is electronically controlled;
- Furnace head with sintering chamber;
- Sintering table;
- Object stand;
- Network cable;
- Table fork;
- Cleaning brush;
- Crystallization table.
Delivery forms- Programat CS4
- Power cord
- Sintering Furnace Temperature Checking Set Starter Kit – Operating Instructions
- Sinter tray
- Sinter tray fork
- IPS e.max Speed Crystallization Tray
- USB download cable
- var. accessories
- Instructions for Use
- Warranty Card
| Dexis Intraoral Digital Dental X-Ray SensorProduct DescriptionDexis Intraoral Digital Dental X-Ray SensorSoftware Ease of Use
According to the manufacturer, the DEXIS x-ray software was designed to be highly effective throughout diagnosis, treatment planning, and treatment. It is intended to serve as an imaging hub, managing all digital images, including intra- and extraoral radiographs and photographs. The manufacturer states that the images can be quickly organized, stored, retrieved, printed, and shared with patients and colleagues. The 9 dentists who participated in this product evaluation were asked to rate the DEXIS Digital Imaging software on its ease of use with regard to taking and accessing radiographs and for diagnosis, patient education, and communication with colleagues and insurance companies. Six of the evaluators rated the system as excellent and 3 rated it as very good. One evaluator commented that “when communicating with patients, we use DEXIS images displayed on a monitor in front of the patient every day on virtually every patient.” Software Integration
The manufacturer claims that the DEXIS imaging software can be easily integrated with all major practice management systems. According to DEXIS, the DEXIS Integrator automatically synchronizes with the patient record.When the evaluators were asked to rate the software integration with practice management software and interface with hardware (eg, cameras, panoramics, and scanners), 78% rated it as excellent to very good, while 22% rated it as good. One of the evaluators said, “The bridge to our practice management systems is seamless. We use [the] DEXIS digital pan[oramic] so that we can store panoramic x-rays easily in the same location as full series. We use an intraoral camera to store preoperative and interoperative photographs for excellent documentation.” Sensor Comfort and Ease of Use
According to DEXIS, the heart of their digital system is the PerfectSize sensor. The manufacturer states that their single-size sensor has 3 advantages:
1) because the electronics are on the back of the sensor, the active imaging area is most of the total sensor size;
2) the beveled corners, slim profile, and rounded casing allow for accurate placement and patient comfort;
3) patented cord placement allows the practitioner to take vertical and horizontal bitewings and all periapicals with only 1 universally sized sensor.
The evaluators were asked to rate both the ease of use of the sensor and patient comfort. Five evaluators rated ease of use excellent and 4 rated it very good. With regard to patient comfort, 3 evaluators rated the sensor excellent and 6 rated it very good. One evaluator noted that he experienced a few issues when placing the sensor in some children and patients with very small mouths. Another evaluator, however, is very happy with the sensor, saying, “I chose DEXIS to take a full radiographic series on every patient. It was the only direct image system we tested that met that objective.” Image Quality
According to DEXIS, their digital xray system provides detailed image quality and includes image enhancement tools that increase diagnostic capabilities. When the 9 evaluators were asked to rate the system’s image quality and enhancement aids, 89% rated them as excellent to very good. One of the evaluators commented that the system’s “ClearVu and image magnification allow us to diagnose very effectively.” Overall Satisfaction
When asked to rate their overall satisfaction with the DEXIS Digital X-ray System, 89% of the evaluators rated it as excellent to very good. Commented one evaluator, “DEXIS has been very responsive to our needs.” System Includes* a highend CCD sensor
* portable PC card and DEXusb connection options
* DEXIS imaging software
* a complete set of sensor holders and accessories
* on-site training
* a printed instruction manual
* training tutorials on CD
* a quick reference guide for the operatory
* 1 year of DEXcare support. | Roland DWX-4W Dental Milling Unit
Reliable High PerformanceIn addition to milling on X, Y and Z axes, the DWX-4W rotates pin-type blocks 360 degrees on a fourth axis (A axis) to support undercuts. The ball screw-driven 4-axis control allows for smooth, high-precision machining. The DWX-4W’s high-performance 60,000-RPM Jaeger spindle is known for its reliability and supports precision milling of glass ceramics and composite resin. With its multi-pin clamp, the DWX-4W is a wet dental milling machine that can mill up to three different pin-type materials continuously in one operation. As a result, prosthetics for up to three different patients can be produced in a single production run, saving time, labour and costs.- Simultaneous 4-axis machining
- 4-state Automatic Tool Changer (ATC)
- 60,000 RPM Jaeger DentaDrive Spindle
- CAM software bundled
- Virtual Machine Panel (VPanel)
- Fully-integrated water and coolant filtration system
- Coolant leakage & flow monitoring sensors
- Tool life monitoring
- Mail notification system
Summary Roland DWX-4W Dental Milling Unit• Maximum Convenience
• Virtual Machine Panel
• Progress and Error Alerts for Error-Free Milling
• Coolant Compartment and Water Filtration
• Clean Cutting Area for Precision Milling
• Economical Open Architecture
• CAM Software Included
• Growth Potential
• Peace of MindThe DWX-4W’s high-performance 60 000 RPM Jaeger DentaDrive spindle supports precision milling. It’s equipped to mil pin-type blocks, including glass ceramics and composite resin – acclaimed in the industry for their superior strength and aesthetics. materials can be finished with a short finishing tome, dramatically reducing labour and production time.In addition to milling on X, Y and Z axes, the DWX-4W rotates pin-type blocks 360 degrees on a fourth axis (A axis) to support undercuts, the rigid ball screw-driven 4-axis control allows for smooth, high-precision machining. With its multi-pin clamp, it can mil up to three different pin-type materials continuously, enabling production three different patient prosthetics in a single production run. it also features an Automatic Tool Changer (ATC) that auto-changes grinding burs without interrupting the production process. | Xray2go Hand Held Dental Portable X-Ray System| FDA Registered. Welcome to the new way of taking X-rays in Dental Offices: x-ray2go is the way to go! x-ray2go is a portable hand held camera that uses a high frequency inverter to generate a stable X-ray output with DC high voltage. This effective DC unit enables patient and operator to be exposed to the least amount of radiation. The integrated compact “Camera like” generator increases the user’s confidence and decrease the negative perception patients have about X-rays. It is small: 5.6″ (W) x 3.3″ (D) x 1.2″ (H). Best of all it only weighs 4.18 Lbs (1.9 Kgs), the lightest on the market.• Portability – room to room ease
• No installation necessary versus complex, expensive and time consuming on-wall installation.
• No need for pass troughs
• Large LCD display – easy to read
• Simple touch controls
• Adjustable exposure time
• Hundreds of images from one (1) battery charge
• High resolution diagnostic images
• No blur from hand movement high-frequency generator produces clear images while reducing
patient dose
• Shield protects the operator from scattered radiation – small dose of radiation emitted
• Leading technology provides the highest level of safety, quality and patient care
• Perfect for special needs patients, home health care patients, nursing home patients, children and
veterinary practices
• Perfect for small operatories
• Perfect for mobile dentistry where room is a big factor |
| | | | |
| | | | Specifications Xray2go Hand Held Dental Portable X-Ray System- Portable, cordless x-ray device
· FDA Registered – K082875
· Safe to use-leakage and scatter radiation are less than conventional wall mounted units
· Small & lightweight (4.2 lbs)
· Camera-like ergonomic design
· 100’s of images on single charge!
· Compatible with both digital & film use
· Simple operation
· Highest image quality
· Wide exposure range
· Lowest patient exposure
· Compact outside—smart inside
· Great staff acceptance
· Convenient for children and “x-ray phobic” patients
· Helps eliminate patient fear and reduces x-ray rejection
| X-ray installation | Tube voltage: 60KV
Tube current: 2mA
Heat Capacity: 8.5KHU | | X-ray Generator | Type: High Frequency Inverter
Power Output: 100W
X-ray Tube | | X-ray Tube | Anode Type: Stationary
Anode Angle: 20°
Focal Spot: 0.8mm | | X-ray Control | Exposure time set 0.01 ~ 1.6sec (0.01 sec step) | | Power Requirement | 25.2VDC | | Weight | 4.2 lbs. | | Dimensions | 6.7”(W) x 6.1”(D) x 5.25”(H) |
|
|
| Roland DWX-51D Dental Milling Unit
The DWX-51D 5-Axis Dental Milling Machine is designed for effortless production of dental prosthetics. Built for precision, error-free milling, you don’t need any machine expertise to operate it. With touch-button controls and automated milling features, the production of high-quality bridges, crowns, inlays, onlays, abutments and other restorations out of 98 mm discs and blocks has been made virtually foolproof.- 5-axis simultaneous milling for complex prosthetics and full mouth restorations
- Precision milling of wax, zirconia, PEEK, gypsum and PMMA
- 10-station Automatic Tool Changer (ATC) with tool length sensor
- Built-in dust collection system for maximum extraction and easy cleaning
5-Axis Machining for Smoother Production
The DWX-51D is a smooth and steady ball screw-driven machine capable of milling complex restorations. It operates on X,Y, and Z axes – simultaneously rotating blocks and discs. Tilting on the B axis it supports deep undercuts and the complex milling of large arch restorations and other full-mouth prosthetics.Clean and Comfortable Operation
A unique inner structure with spacious airflow supports comfortable operation, while an automatic dust collection feature boasts a powerful vacuum for clean usage and calibration. An ionizer removes static, ideal for milling PMMA material.Economical Open Architecture
The open architecture of the DWX-51D allows you to work with the latest materials, CAD/CAM software and scanners, without needing to rely on a single source.VPanel for Simplified Operation
Complex controls associated with CNC milling have been replaced by a user-friendly Virtual Machine Panel (VPanel) that automatically starts the milling process, conducts machine diagnostics and operates milling calibration from your computer.New C-Clamp for Quicker Set-Up
The new C-clamp on the DWX-51D requires the adjustment of only two screws for a simplified set-up. The C-clamp (which includes a torque driver for improved clamping consistency) also provides exact alignment and uniformity, resulting in less misalignment issues.10-Station Automatic Tool Changer for Continuous Milling With a 10-station Automatic Tool Changer (ATC), DWX-51D users don’t have to stop production to replace the specific burs needed for milling different materials.User Replaceable Spindle Roland DWX-51D Dental Milling Unit
When the spindle needs replacing on the DWX-51D, there’s no need to stop production and pay for a technician to come out. Featuring a spindle that users can replace themselves, production never has to come to a complete standstill.Progress and Error Alerts for Error-Free Milling
To further automate the milling process and ensure error-free production, users receive e-mail notifications detailing any errors, or when milling is completed, while a color-coded LED light signals machine status.9 Pin-Type Material Adapter Included
A material adapter with nine pin-type placement options is included for easy and error free set-up.VITA Certified
VITA certifies the Roland DWX-51D for milling VITA ENAMIC. The DWX-51D is the only dry-milling system that, when equipped with our ZBD-100D-HY /50D-HY /30D-HY hybrid tools, is authorized to mill VITA ENAMIC and produce a full-range of dental prosthetics. Other material brands are also available for milling with the DWX-51D.Peace of Mind, Reliability and Support
The DWX-51D offers unmatched reliability and post-sales support that includes a two-year warranty. Enjoy the benefit of certified service engineers to ensure that your device is always up-and-running and a dedicated online and telephone support staff who can answer all your questions and concerns. | Ivoclar Vivadent Programat EP 3010Programat EP 3010The Programat EP 3010 is characterized by cost effectiveness and high-quality press and firing results. In addition, the Programat EP 3010 is optimally coordinated with Ivoclar Vivadent press ceramic materials such as IPS e.max Press.In comparison to its predecessor model EP 3000, the operation of the Programat EP 3010 has become even simpler due to the new colour touch display, the modern icons, the intuitive menu-based navigation and the proven membrane-sealed keypad.The new QTK2 heating muffle in combination with the SiC bottom reflector ensures homogeneous heat distribution in the firing chamber. As a result, the investment ring is preheated more evenly and reliably. Furthermore, these features enable the user to press difficult-to-press objects, e.g. with very thin marginal areas, and to achieve even higher quality results.The electronic press drive with force sensor ensures the precise control of the press plunger in the micrometre range. The integrated Crack Detection System (CDS) immediately interrupts the press process if a crack in the investment ring occurs. Therefore, restorations are optimally protected. Advantages:- Programs are optimally coordinated with Ivoclar Vivadent materials.
- QTK2 muffle technology with SiC bottom reflector for homogeneous heat distribution.
- Colour touch screen and proven membrane-sealed keypad for easy operation.
- Electronic press drive with force sensor produces high-quality press results. No compressed air connection required.
- Crack Detection System detects cracks in the investment ring.
- Easy and automatic temperature calibration at two reference points (ATK2).
- Simple software update via USB flash drive.
- Remote diagnosis function via data file for optimum support by a service centre.
- Broad range of programs: 300 individual firing and 20 individual press programs.
- Power Saving Technology for power-saving operation.
|
Reviews
There are no reviews yet.