Ivoclar Vivadent Programat CS4 is a compact multifunction furnace for dental practices. It is designed for sintering zirconia restorations, e.g. IPS e.max ZirCAD, using a temperature of up to 1,600°C. The furnace can also be employed as a glazing and crystallisation furnace for IPS e.max CAD and IPS Empress CAD restorations. The speed sintering program allows zirconia restorations to be manufactured directly in the dental practice in a single session.
A clearly arranged membrane-sealed keypad with graphic display enables easy operation. Both pre-set and individual programs for third-party materials are available. Programat CS4 is a stand-alone furnace that features an open system.
Ivoclar Vivadent Programat CS4 Advantages:
Fast sintering of IPS e.max ZirCAD
Crystallisation of IPS e.max CAD
Glaze program for IPS e.max ZirCAD, IPS e.max CAD and IPS Empress CAD
High processing capacity (up to six units)
Open system
Simple and language-independent operation due to the proven combination of membrane-sealed keypad and graphic display
Power Saving Technology
Compact design
Possibility of on-site temperature calibration
OSD (Optical Status Display)
Remote control via PC/laptop by means of PrograBase3 software
Ivoclar Vivadent Programat CS4 Key features
The firing chamber can be heated up to 1600 ° C;
The electronics with the corresponding software controls the sintering program;
There is a constant comparison between the actual and the set temperature;
The sintering table can accommodate up to 6 single restorations at the same time
Ivoclar Vivadent Programat CS4 Features of the model
Fast sintering process (it is possible to manufacture ZrO2 restorations in one medical appointment, maximum – six units at a time);
Glaze firing and crystallization (cost-saving, as usually different furnaces, are required for sintering, glaze firing, and crystallization);
Precise temperature (precise temperature control for glaze firing, crystallization, and sintering).
Ivoclar Vivadent Programat CS4 Application
Sintering and glazing of ZrO 2 materials (eg IPS e.max ZirCAD);
Crystallization and glazing (e.g. IPS e.max CAD).
The Programat CS4 cannot be used as a ceramic kiln for ceramics in the dental laboratory.
Specifications Ivoclar Vivadent Programat CS4
Power supply: 118-240 V / 50-60 Hz
Overvoltage category: II
Pollution degree: 2
Allowable voltage fluctuations: + – 10%
Maximum current consumption: 16A @ 118V, 8A @ 240V
Electrical fuses: 250 V / T 16 A (heating element)
Fuse size: diameter 5 x 20 mm
Closed oven dimensions: depth – 430 mm, width – 310 mm (with stand – 390 mm), height – 570 mm
Useful chamber volume: diameter – 80 mm, height – 80 mm
Maximum firing temperature: 1600 ° C
Weight: bottom 10 kg, furnace head 17 kg
Equipment
The lower part of the oven is electronically controlled;
Furnace head with sintering chamber;
Sintering table;
Object stand;
Network cable;
Table fork;
Cleaning brush;
Crystallization table.
Delivery forms
Programat CS4
Power cord
Sintering Furnace Temperature Checking Set Starter Kit – Operating Instructions
Sinter tray
Sinter tray fork
IPS e.max Speed Crystallization Tray
USB download cable
var. accessories
Instructions for Use
Warranty Card
Reviews (0)
Reviews
There are no reviews yet.
Be the first to review “Ivoclar Vivadent Programat CS4” Cancel reply
Programat CS4 is the ideal sintering, crystallisation and glazing furnace for dental practices.
Caries diagnostic aid for surface caries.
TRIOS 4 has built-in fluorescent technology that aids in the identification of possible caries. Using TRIOS 4, dental professionals can now be aided in the early-detection of surface caries, without the need for an additional scanning device.Caries diagnostic aid for interproximal caries.
TRIOS 4 will also feature a dedicated transillumination smart tip later this year. The smart tip will aid in the identification of possible interproximal caries undetectable to the eye, without emitting radiation.
The ultimate in ease, material flexibility and unattended production, the DWX-52DC dental milling machine is designed to greatly expand your lab production and profit. Featuring a 6-slot Automatic Disc Changer, 15-station Automatic Tool Changer and other automated features, it gives users of all skill levels an exceptionally powerful, efficient and affordable dental restoration solution.
The DWX-51D 5-Axis Dental Milling Machine is designed for effortless production of dental prosthetics. Built for precision, error-free milling, you don’t need any machine expertise to operate it. With touch-button controls and automated milling features, the production of high-quality bridges, crowns, inlays, onlays, abutments and other restorations out of 98 mm discs and blocks has been made virtually foolproof.
iTero HD2.9 simply allows to digitally scan a prepared tooth and wirelessly send this information directly to the dental laboratory for fabrication of a CAD/CAM crown without the gooey mess.
NEW Carestream 8000C Digital Panoramic+Ceph
Content
Ivoclar Vivadent Programat CS4
Ivoclar Vivadent Programat CS4 is a compact multifunction furnace for dental practices. It is designed for sintering zirconia restorations, e.g. IPS e.max ZirCAD, using a temperature of up to 1,600°C. The furnace can also be employed as a glazing and crystallisation furnace for IPS e.max CAD and IPS Empress CAD restorations. The speed sintering program allows zirconia restorations to be manufactured directly in the dental practice in a single session.
A clearly arranged membrane-sealed keypad with graphic display enables easy operation. Both pre-set and individual programs for third-party materials are available. Programat CS4 is a stand-alone furnace that features an open system.Ivoclar Vivadent Programat CS4 Advantages:
Fast sintering of IPS e.max ZirCAD
Crystallisation of IPS e.max CAD
Glaze program for IPS e.max ZirCAD, IPS e.max CAD and IPS Empress CAD
High processing capacity (up to six units)
Open system
Simple and language-independent operation due to the proven combination of membrane-sealed keypad and graphic display
Power Saving Technology
Compact design
Possibility of on-site temperature calibration
OSD (Optical Status Display)
Remote control via PC/laptop by means of PrograBase3 software
Ivoclar Vivadent Programat CS4 Key features
The firing chamber can be heated up to 1600 ° C;
The electronics with the corresponding software controls the sintering program;
There is a constant comparison between the actual and the set temperature;
The sintering table can accommodate up to 6 single restorations at the same time
Ivoclar Vivadent Programat CS4 Features of the model
Fast sintering process (it is possible to manufacture ZrO2 restorations in one medical appointment, maximum – six units at a time);
Glaze firing and crystallization (cost-saving, as usually different furnaces, are required for sintering, glaze firing, and crystallization);
Precise temperature (precise temperature control for glaze firing, crystallization, and sintering).
Ivoclar Vivadent Programat CS4 Application
Sintering and glazing of ZrO 2 materials (eg IPS e.max ZirCAD);
Crystallization and glazing (e.g. IPS e.max CAD).
The Programat CS4 cannot be used as a ceramic kiln for ceramics in the dental laboratory.
Specifications Ivoclar Vivadent Programat CS4
Power supply: 118-240 V / 50-60 Hz
Overvoltage category: II
Pollution degree: 2
Allowable voltage fluctuations: + – 10%
Maximum current consumption: 16A @ 118V, 8A @ 240V
Electrical fuses: 250 V / T 16 A (heating element)
Fuse size: diameter 5 x 20 mm
Closed oven dimensions: depth – 430 mm, width – 310 mm (with stand – 390 mm), height – 570 mm
Useful chamber volume: diameter – 80 mm, height – 80 mm
Maximum firing temperature: 1600 ° C
Weight: bottom 10 kg, furnace head 17 kg
Equipment
The lower part of the oven is electronically controlled;
Furnace head with sintering chamber;
Sintering table;
Object stand;
Network cable;
Table fork;
Cleaning brush;
Crystallization table.
Delivery forms
Programat CS4
Power cord
Sintering Furnace Temperature Checking Set Starter Kit – Operating Instructions
Take your dentistry beyond treatment
Our intraoral scanning solutions allow you to take your dentistry beyond. The new 3Shape TRIOS 4 combines our established superior scanning technology with groundbreaking caries diagnostic aid technology* for both surface and interproximal caries. No additional scanning device needed.Smart tips 3Shape TRIOS 4 Intraoral ScannerThe new generation of TRIOS smart tips feature instant-heat technology for optimized scanning.Be scan-ready in seconds with instant-heat technology.Scan 2-3 times as many patients with instant-heat in combination with 30% more battery life.Optimal scanning due to automatic use counter and tip-change alert.The TRIOS system is a complete in-house ecosystem including a scanner and extensive design software. This means there are plenty of options depending on your needs. Those who are just looking for a scanner and want to utilize labs may look into the basic, cheaper options. Those who want to design crowns, bridges and other prosthetics can opt for design modules. The only missing component is a milling machine, which if you want to mill restorations in-house, will have to be from a third party. This proves to be a weak link in the digital chain.At iDD, we have been using the TRIOS 3 for over four years in our clinic, spending literally thousands of hours learning the workflow. We have carried out all aspects of dentistry using the TRIOS system including same-day crowns, implant surgical guides, implant restorations and digital smile design.Disclaimer: This is an impartial review of the scanner and we do not have any ties to the company. The team at iDD remain unwaveringly committed to providing you with objective and trustworthy information and therefore do not seek any sponsorship. 3Shape kindly loaned us a TRIOS 4 scanner, due to a personal interest in upgrading our older TRIOS 3 model. Our team at iDD are constantly approached by scanner companies to review their scanners and it is always made clear that they will have no part in writing reviews or restricting any conclusions iDD makes in our thorough analysis and clinical use of these products.
The DWX-52DC Dental Mill with Disc Changer is the newest addition to the popular DWX series of 5-Axis Dental Milling Machines. With a combination of automated functions designed to help reduce manual work, production of dental restorations is now even more efficient and reliable. The DWX-52DC’s open architecture means it can be used with the CAD/CAM software that your technicians are already familiar with in order to cut learning time and create the optimum workflow for your production environment. The DWX-52DC provides an efficient digital solution for both dental laboratories seeking to boost production capabilities, as well as labs looking to expand into the digital realm.
95 mm (diameter), height max. 35 mm
Pin diameter: 6 mm
Pin diameter:
6 mm
Loadable workpiece weight
Up to 850 g
Number of adapters housed
6
Operating speed
XYZ axis:
0.24 to 70.9 in./min.(6 to 1,800 mm/min.)
Spindle motor
Brushless DC Motor
Spindle speed
6,000 to 30,000 rpm
Rotary axis travel angle
A:
±360°
B:
±30°
Number of burs housed
15
Attachable bur
Shank diameter:
4 mm
Length:
40 to 55 mm
Compatible compressed air
0.2 MPa
Interface
USB
Control command set
RML-1, NC code
Power requirements
AC 100 V to 240 V ±10%, 50/60 Hz, 2.0 A
(overvoltage category II, IEC60664-1)
Power consumption
Approx. 200 W
Operating noise
During operation:
70 dB (A) or less (when not cutting),
During standby:
45 dB (A) or less
External dimensions
Width x Depth x Height:
34.6 x 26.0 x 23.6 in. (880 x 660 x 600 mm)
Weight:
105 kg (231.5 lbs.)
The ultimate in ease, material flexibility and unattended production, the DWX-52DC dental milling machine is designed to greatly expand your lab production and profit. Featuring a 6-slot Automatic Disc Changer, 15-station Automatic Tool Changer and other automated features, it gives users of all skill levels an exceptionally powerful, efficient and affordable dental restoration solution.
Roland DWX-51D Integrated HD Mill Package
DWX-51D 5-Axis Dental Mill
High Definition Custom CAM Strategy SUM3D
Nabertherm High Speed Auto Cool Zi Furnace
Quatro IVAC Mill Suction
Integration Package for Implant Abutments
Integration Package for up to 60mm disc sizes
Integration Package for HD High Detail End Mills
Start Up Package for Milling Materials
Top To Bottom Mill Training by the Industry Experts
Equipment Set up, IT and Networking Included
Mill Contingency and Loaner ProgramBuilt-to-Last
For thirty years, Roland DG has been the trusted provider of milling machines that are built to last. The DWX-51D 5-Axis Dental Milling Machine is no exception. After extensive research in which lab technicians were asked what they needed in a production mill, the DWX-51D was developed to enhance user experience, maximize ease-of-use and improve output quality. Built with a simple and modern design, the DWX-51D looks as effortless as it operates.Features
5-axis simultaneous operation for non-stop precision milling
Sturdy and efficient ball screw-driven system
New C-clamp for easy adjustment and alignment
10-station Automatic Tool Changer (ATC) for continuous milling
Powerful vacuum and anti-static ionizer for clean calibration and dust reductionThe DWX-51D is designed for effortless, precision production of dental prosthetics fromcopings, crowns and bridges to inlays, onlays and abutments, etc. With a host of automated features and a clean, stable work environment, the DWX-51D is the perfect solution for labs wanting to increase production or those looking to get into digital milling for the first time.
Built-for-You.Built-to-Last.For thirty years, Roland DG has been the trusted provider of milling machines that are built to last. The DWX-51D 5-Axis Dental Milling Machine is no exception. After extensive research in which lab technicians were asked what they needed in a production mill, the DWX-51D was developed to enhance user experience, maximize ease-of-use and improve output quality. Built with a simple and modern design, the DWX-51D looks as effortless as it operates.
Distinguishing Features Roland DWX-51D Dental Milling Unit
5-axis simultaneous milling for precision milling
Steady and efficient ball screw-driven operation
New C-shape clamp for easy adjustment and alignment
10-station Automatic Tool Changer (ATC) for continuous milling
Powerful vacuum and anti-static ionizer for clean calibration and dust reduction
Ultimate Convenience and Ease-of-Use
A variety of new features ensure continuous, user-friendly milling, including
Sturdy frame ensures stability, while slim design fits nearly any lab space
Easy access tool drawer properly stores and protects tools
Color-coded LED status lights signal current job progress
Virtual Machine Panel (VPanel) allows users to configure settings from their computer, send CAM data to the DWX-51D for production, and track milling progress
Easily accessible cutting area for simple tool replacement and cleaning
iTero HD2.9 simply allows to digitally scan a prepared tooth and wirelessly send this information directly to the dental laboratory for fabrication of a CAD/CAM crown – without the gooey mess. The wireless transmission saves shipping time and eliminates distortion that can often be found with traditional stone modelsThe digital scan is, quite literally, digitally perfect. We then deliver the digital scan to our lab where a precision fitting restoration is created.iTero HD2.9 system eliminated the uncomfortable patient experience of traditional impressions, utilizes advanced state of the art digital technology, and provides with superior fitting restorations with little or no adjustmentsiTero Intra-Oral Scanner
Model: HD2.9
2014 Date of Mfg.
Brochure/Video: Click Here
Limited Use
Includes:
iTero Software (pre-loaded)
90 Day Parts Warranty
User Manual(s)
Free Standard Shipping (Commercial USA Addresses)
Its ergonomic design comes with safe docking station. It has thin fiber optic cable which enables quick data transfer from the wand to the cart. This optimized cable length assists various cart positions in the operatory.Orthodontic treatment is more than just straightening teeth; it’s about ensuring your teeth and jaws are in alignment. To achieve this, we need to get an accurate look at where your teeth are positioned. To do this, we use the iTero Intraoral digital scanner.A good impressionIn the orthodontic and dental industries, ‘impressions’ is the term we use for getting a good picture of where your teeth currently sit. These impressions were previously taken using a type of dental cement. Pasted on your teeth, patients were required to lie for a few minutes while the cement-like material set. The dental professional could then remove the set material which had formed an ‘impression’ of your teeth.This process was messy, rather unpleasant and not very comfortable. Fortunately, that method is a thing of the past. These days, we use scanning technology and at L&L Orthodontics, our technology of choice is the iTero Intraoral digital scanner.
What is the iTero scanner?
The iTero scanner is new 3D orthodontic scanning technology. Using the latest developments in intraoral scanning, the iTero scanner accurately scans your teeth as part of your orthodontic assessment. The iTero scanner is made up of a small, wand-like device which is used to scan your teeth and jaws. The data it is collecting then appears on the computer screen, allowing you to see the ‘impressions’ the scanner is taking.The iTero scanner works in with Invisalign®* treatment and lets you see what your teeth will look like post-treatment, even before you’ve started. Before we recommend a course of treatment for you, we’ll take impressions of your teeth using the iTero scanner to ensure we are making our recommendation on accurate information.To find out more about the iTero scanner and other orthodontic technology we use here at L&L Orthodontics, book your specialist consultation today.
Professionally Crated & Shipped to your commercial address
Buy With Confidence! These units when they arrive at your office:
Includes delivery to your location
You and your staff will receive basic training
Twain Driver - Use with any image application
Easier by Design
"One Shot" CephalometryThe 8000C System is the first digital cephalometry system in the world to expose all standard cephalometric images in a single shot. Until now, digital systems had to scan a patient's head for up to 8 to 18 seconds. But Kodak's innovative one shot technology captures the image in just over a second, drastically reducing the risk of blurred images and significantly improving your patient's comfort.Easier by Design Carestream 8000C Digital Panoramic+CephWith the 8000C System, you perform all of the image programming on your computer, using a clear, user-friendly interface. A series of easy-to-follow steps makes it fast and simple to set all your patient and image parameters, leaving you more time to spend with your patients.Complete Digital Imaging SolutionWith a full range of panoramic and cephalometric imaging capabilities, the 8000C System gives orthodontists, oral and maxillofacial surgeons, and dentists a completely integrated, digital solution for greater ease of use and practice efficiency. In addition to a wide variety of cephalometric options, you can capture TMJ, panoramic, segmented panoramic, and maxillary sinus radiographs.The 8000C System features
One-shot cephalometry for instant image capture
Comfortable, user-friendly patient positioning
Dual sensor system
World-class service & Support
Powerful Processing Made SimpleThe Optional Kodak Carestream Imaging Software Suite makes analysis easier with a number of powerful image-processing capabilities. From contrast and brightness to magnification and full-screen display, you have a full range of tools at your disposal to help you get the most out of your radiographs.Efficient IntegrationThe digital radiographs you acquire with the 8000C System can be integrated into your practice management software, along with cephalometric tracing, treatment planning, and soft tissue morphing modules. And it's easy to share images with coworkers, colleagues, insurance companies, and other organizations, saving time and improving workflow efficiency.
Reviews
There are no reviews yet.