Ivoclar Vivadent Programat CS4 is a compact multifunction furnace for dental practices. It is designed for sintering zirconia restorations, e.g. IPS e.max ZirCAD, using a temperature of up to 1,600°C. The furnace can also be employed as a glazing and crystallisation furnace for IPS e.max CAD and IPS Empress CAD restorations. The speed sintering program allows zirconia restorations to be manufactured directly in the dental practice in a single session.
A clearly arranged membrane-sealed keypad with graphic display enables easy operation. Both pre-set and individual programs for third-party materials are available. Programat CS4 is a stand-alone furnace that features an open system.
Ivoclar Vivadent Programat CS4 Advantages:
Fast sintering of IPS e.max ZirCAD
Crystallisation of IPS e.max CAD
Glaze program for IPS e.max ZirCAD, IPS e.max CAD and IPS Empress CAD
High processing capacity (up to six units)
Open system
Simple and language-independent operation due to the proven combination of membrane-sealed keypad and graphic display
Power Saving Technology
Compact design
Possibility of on-site temperature calibration
OSD (Optical Status Display)
Remote control via PC/laptop by means of PrograBase3 software
Ivoclar Vivadent Programat CS4 Key features
The firing chamber can be heated up to 1600 ° C;
The electronics with the corresponding software controls the sintering program;
There is a constant comparison between the actual and the set temperature;
The sintering table can accommodate up to 6 single restorations at the same time
Ivoclar Vivadent Programat CS4 Features of the model
Fast sintering process (it is possible to manufacture ZrO2 restorations in one medical appointment, maximum – six units at a time);
Glaze firing and crystallization (cost-saving, as usually different furnaces, are required for sintering, glaze firing, and crystallization);
Precise temperature (precise temperature control for glaze firing, crystallization, and sintering).
Ivoclar Vivadent Programat CS4 Application
Sintering and glazing of ZrO 2 materials (eg IPS e.max ZirCAD);
Crystallization and glazing (e.g. IPS e.max CAD).
The Programat CS4 cannot be used as a ceramic kiln for ceramics in the dental laboratory.
Specifications Ivoclar Vivadent Programat CS4
Power supply: 118-240 V / 50-60 Hz
Overvoltage category: II
Pollution degree: 2
Allowable voltage fluctuations: + – 10%
Maximum current consumption: 16A @ 118V, 8A @ 240V
Electrical fuses: 250 V / T 16 A (heating element)
Fuse size: diameter 5 x 20 mm
Closed oven dimensions: depth – 430 mm, width – 310 mm (with stand – 390 mm), height – 570 mm
Useful chamber volume: diameter – 80 mm, height – 80 mm
Maximum firing temperature: 1600 ° C
Weight: bottom 10 kg, furnace head 17 kg
Equipment
The lower part of the oven is electronically controlled;
Furnace head with sintering chamber;
Sintering table;
Object stand;
Network cable;
Table fork;
Cleaning brush;
Crystallization table.
Delivery forms
Programat CS4
Power cord
Sintering Furnace Temperature Checking Set Starter Kit – Operating Instructions
Sinter tray
Sinter tray fork
IPS e.max Speed Crystallization Tray
USB download cable
var. accessories
Instructions for Use
Warranty Card
Reviews (0)
Reviews
There are no reviews yet.
Be the first to review “Ivoclar Vivadent Programat CS4” Cancel reply
Programat CS4 is the ideal sintering, crystallisation and glazing furnace for dental practices.
A true open architecture system, the compact DWX-50 integrates with industry standard 3D scanners, computers and all popular CAD/CAM software to provide a very cost-effective production solution. Advanced communications tools and operating features allow the DWX-50 to mill unattended while providing confidence in the finished product to the lab technician.
iTero HD2.9 simply allows to digitally scan a prepared tooth and wirelessly send this information directly to the dental laboratory for fabrication of a CAD/CAM crown without the gooey mess.
The new highly accurate 0.5 mm milling tool reliably delivers first class clinical results. Switch to Extra Fine milling mode for a higher level of detail with occlusal fissures and interdental areas on bridges.
Image Quality
According to DEXIS, their digital xray system provides detailed image quality and includes image enhancement tools that increase diagnostic capabilities. When the 9 evaluators were asked to rate the system’s image quality and enhancement aids, 89% rated them as excellent to very good. One of the evaluators commented that the system’s “ClearVu and image magnification allow us to diagnose very effectively.”Overall Satisfaction
When asked to rate their overall satisfaction with the DEXIS Digital X-ray System, 89% of the evaluators rated it as excellent to very good. Commented one evaluator, “DEXIS has been very responsive to our needs.”
From general to littles, this machine has you covered. This digital system excels at both general and pediatric practices, with great strengths in cosmetic dentistry and orthodontics as well.
Content
Ivoclar Vivadent Programat CS4
Ivoclar Vivadent Programat CS4 is a compact multifunction furnace for dental practices. It is designed for sintering zirconia restorations, e.g. IPS e.max ZirCAD, using a temperature of up to 1,600°C. The furnace can also be employed as a glazing and crystallisation furnace for IPS e.max CAD and IPS Empress CAD restorations. The speed sintering program allows zirconia restorations to be manufactured directly in the dental practice in a single session.
A clearly arranged membrane-sealed keypad with graphic display enables easy operation. Both pre-set and individual programs for third-party materials are available. Programat CS4 is a stand-alone furnace that features an open system.Ivoclar Vivadent Programat CS4 Advantages:
Fast sintering of IPS e.max ZirCAD
Crystallisation of IPS e.max CAD
Glaze program for IPS e.max ZirCAD, IPS e.max CAD and IPS Empress CAD
High processing capacity (up to six units)
Open system
Simple and language-independent operation due to the proven combination of membrane-sealed keypad and graphic display
Power Saving Technology
Compact design
Possibility of on-site temperature calibration
OSD (Optical Status Display)
Remote control via PC/laptop by means of PrograBase3 software
Ivoclar Vivadent Programat CS4 Key features
The firing chamber can be heated up to 1600 ° C;
The electronics with the corresponding software controls the sintering program;
There is a constant comparison between the actual and the set temperature;
The sintering table can accommodate up to 6 single restorations at the same time
Ivoclar Vivadent Programat CS4 Features of the model
Fast sintering process (it is possible to manufacture ZrO2 restorations in one medical appointment, maximum – six units at a time);
Glaze firing and crystallization (cost-saving, as usually different furnaces, are required for sintering, glaze firing, and crystallization);
Precise temperature (precise temperature control for glaze firing, crystallization, and sintering).
Ivoclar Vivadent Programat CS4 Application
Sintering and glazing of ZrO 2 materials (eg IPS e.max ZirCAD);
Crystallization and glazing (e.g. IPS e.max CAD).
The Programat CS4 cannot be used as a ceramic kiln for ceramics in the dental laboratory.
Specifications Ivoclar Vivadent Programat CS4
Power supply: 118-240 V / 50-60 Hz
Overvoltage category: II
Pollution degree: 2
Allowable voltage fluctuations: + – 10%
Maximum current consumption: 16A @ 118V, 8A @ 240V
Electrical fuses: 250 V / T 16 A (heating element)
Fuse size: diameter 5 x 20 mm
Closed oven dimensions: depth – 430 mm, width – 310 mm (with stand – 390 mm), height – 570 mm
Useful chamber volume: diameter – 80 mm, height – 80 mm
Maximum firing temperature: 1600 ° C
Weight: bottom 10 kg, furnace head 17 kg
Equipment
The lower part of the oven is electronically controlled;
Furnace head with sintering chamber;
Sintering table;
Object stand;
Network cable;
Table fork;
Cleaning brush;
Crystallization table.
Delivery forms
Programat CS4
Power cord
Sintering Furnace Temperature Checking Set Starter Kit – Operating Instructions
The compact DWX-50 combines 5-axis simultaneous machining capability and a five-station automatic tool changer to deliver advanced features at a very affordable price point. Designed specifically for dental labs and technicians, the user-friendly DWX-50 allows for clean, quiet operation and the quality production of complex dental arches, abutments, bridges, copings and crowns from zirconia, wax and PMMA. Equipped with an integrated air blower and dust collection system, the DWX-50 ensures protection of moving parts while maintaining a clean, safe environment. Built on open technology, the DWX-50 supports a wide range of industry standard CAD/CAM software and tools, allowing for easy integration with popular commercially available dental prosthetic production solutions.5-axis simultaneous machiningCapable of 5-axis simultaneous machining, the DWX-50 supports the production of high-quality dental prosthetics at an affordable price point. The DWX-50 is designed to mill on X, Y and Z axes, rotating blocks and discs of material 360 degrees in both clockwise and counterclockwise movements, as well as tilting materials forward and backward 20 degrees to support complex cuts.Five-station automatic tool charger Roland DWX-50 5-Axis Dental Milling MachineThe five-station Automatic Tool Changer (ATC) with a tool length sensor enables the user to run multiple tools for one job or an entire disc unattended. Instead of inspecting finished pieces to determine if everything was milled correctly, the integrated tool diagnostics feature will notify users if a tool was broken prior to completion, resulting in reduced time and wasted materials.Taking control of prosthesis productionWith its unmatched ease of use and short learning time, the DWX-50 provides a cost-effective solution that is ideal for dental labs wishing to take control of the production process while avoiding the long lead times and costs associated with outsourcing.A true open architecture system, the compact DWX-50 integrates with industry standard 3D scanners, computers and all popular CAD/CAM software to provide a very cost-effective production solution. Advanced communications tools and operating features allow the DWX-50 to mill unattended while providing confidence in the finished product to the lab technician.
iTero HD2.9 simply allows to digitally scan a prepared tooth and wirelessly send this information directly to the dental laboratory for fabrication of a CAD/CAM crown – without the gooey mess. The wireless transmission saves shipping time and eliminates distortion that can often be found with traditional stone modelsThe digital scan is, quite literally, digitally perfect. We then deliver the digital scan to our lab where a precision fitting restoration is created.iTero HD2.9 system eliminated the uncomfortable patient experience of traditional impressions, utilizes advanced state of the art digital technology, and provides with superior fitting restorations with little or no adjustmentsiTero Intra-Oral Scanner
Model: HD2.9
2014 Date of Mfg.
Brochure/Video: Click Here
Limited Use
Includes:
iTero Software (pre-loaded)
90 Day Parts Warranty
User Manual(s)
Free Standard Shipping (Commercial USA Addresses)
Its ergonomic design comes with safe docking station. It has thin fiber optic cable which enables quick data transfer from the wand to the cart. This optimized cable length assists various cart positions in the operatory.Orthodontic treatment is more than just straightening teeth; it’s about ensuring your teeth and jaws are in alignment. To achieve this, we need to get an accurate look at where your teeth are positioned. To do this, we use the iTero Intraoral digital scanner.A good impressionIn the orthodontic and dental industries, ‘impressions’ is the term we use for getting a good picture of where your teeth currently sit. These impressions were previously taken using a type of dental cement. Pasted on your teeth, patients were required to lie for a few minutes while the cement-like material set. The dental professional could then remove the set material which had formed an ‘impression’ of your teeth.This process was messy, rather unpleasant and not very comfortable. Fortunately, that method is a thing of the past. These days, we use scanning technology and at L&L Orthodontics, our technology of choice is the iTero Intraoral digital scanner.
What is the iTero scanner?
The iTero scanner is new 3D orthodontic scanning technology. Using the latest developments in intraoral scanning, the iTero scanner accurately scans your teeth as part of your orthodontic assessment. The iTero scanner is made up of a small, wand-like device which is used to scan your teeth and jaws. The data it is collecting then appears on the computer screen, allowing you to see the ‘impressions’ the scanner is taking.The iTero scanner works in with Invisalign®* treatment and lets you see what your teeth will look like post-treatment, even before you’ve started. Before we recommend a course of treatment for you, we’ll take impressions of your teeth using the iTero scanner to ensure we are making our recommendation on accurate information.To find out more about the iTero scanner and other orthodontic technology we use here at L&L Orthodontics, book your specialist consultation today.
DENTSPLY SIRONA CEREC PRIMEMILLSpeedEngineered for speed and precision, the new CEREC Primemill inherits the proven strength of its predecessor and raises its powerful performance to entirely new heights.You can now mill zirconia restorations in Super Fast milling mode in around 5 minutes, cutting processing times by more than half. The improved grinding mode for high quality glass ceramics also grinds the material faster than ever before. The result? Satisfied patients and high productivity.QualityDENTSPLY SIRONA CEREC PRIMEMILL A combination of new electronics, software, motors and mechanical components contributes to finer resolution and enhanced dynamics. This results in outstanding restoration margins and surface details – for extremely precise results.The new highly accurate 0.5 mm milling tool reliably delivers first class clinical results. Switch to Extra Fine milling mode for a higher level of detail with occlusal fissures and interdental areas on bridges.VersatilityDENTSPLY SIRONA CEREC PRIMEMILL Welcome to a world where you‘re spoiled for choice! The new CEREC Primemill combines wet and dry milling and wet grinding. No matter the indication, with CEREC Primemill you can select from a broad range of material options from validated partners providing the flexibility and predictability you need to offer patients the best possible treatment.Choose from the full spectrum of machining options, including dry and wet milled zirconia, or wet grinding of glass and hybrid ceramics.ConvenienceDENTSPLY SIRONA CEREC PRIMEMILL The new 7” touch interface with user guidance guides operators step-by-step through the workflow, key maintenance procedures and other routine tasks, so you can delegate milling with complete peace-of-mind. The integrated block scanner is a time-saving new feature that automatically scans material blocks with compatible data matrix codes and records the information, including type, size, color and zirconia enlargement factor. All CEREC Primemill tools are fitted with a color-coded RFID chip that is read by the RFID tool reader, feeding into the tool status display, alerting the user if a tool needs replacing. This ensures all tools are performing at optimal levels. A LED light strip indicates unit status and milling and grinding progress.The all-new CERECThe latest generation of our CEREC system sets new standards so you can offer your patients an unmatched combination of single-visit dentistry and excellent quality.A unique solutionThe CEREC system comprises world-class components that interact perfectly ensuring seamless workflows. With CEREC Primescan, CEREC Software 5 and CEREC Primemill, digital chairside dentistry is faster, easier and more reliable than ever before.Outstanding resultsAfter 35 years of continuous optimization, CEREC gives you the options you need to treat multiple indications with the confidence that comes from outstanding results.
Designed to stand out – and fit inThe new CEREC Primemill does not just communicate seamlessly with other CEREC devices, but its sleek design is also the perfect match – and the ideal look for a progressive dental practice.
Dexis Intraoral Digital Dental X-Ray SensorSoftware Ease of Use
According to the manufacturer, the DEXIS x-ray software was designed to be highly effective throughout diagnosis, treatment planning, and treatment. It is intended to serve as an imaging hub, managing all digital images, including intra- and extraoral radiographs and photographs. The manufacturer states that the images can be quickly organized, stored, retrieved, printed, and shared with patients and colleagues. The 9 dentists who participated in this product evaluation were asked to rate the DEXIS Digital Imaging software on its ease of use with regard to taking and accessing radiographs and for diagnosis, patient education, and communication with colleagues and insurance companies. Six of the evaluators rated the system as excellent and 3 rated it as very good. One evaluator commented that “when communicating with patients, we use DEXIS images displayed on a monitor in front of the patient every day on virtually every patient.”Software Integration
The manufacturer claims that the DEXIS imaging software can be easily integrated with all major practice management systems. According to DEXIS, the DEXIS Integrator automatically synchronizes with the patient record.When the evaluators were asked to rate the software integration with practice management software and interface with hardware (eg, cameras, panoramics, and scanners), 78% rated it as excellent to very good, while 22% rated it as good. One of the evaluators said, “The bridge to our practice management systems is seamless. We use [the] DEXIS digital pan[oramic] so that we can store panoramic x-rays easily in the same location as full series. We use an intraoral camera to store preoperative and interoperative photographs for excellent documentation.”Sensor Comfort and Ease of Use
According to DEXIS, the heart of their digital system is the PerfectSize sensor. The manufacturer states that their single-size sensor has 3 advantages:
1) because the electronics are on the back of the sensor, the active imaging area is most of the total sensor size;
2) the beveled corners, slim profile, and rounded casing allow for accurate placement and patient comfort;
3) patented cord placement allows the practitioner to take vertical and horizontal bitewings and all periapicals with only 1 universally sized sensor.
The evaluators were asked to rate both the ease of use of the sensor and patient comfort. Five evaluators rated ease of use excellent and 4 rated it very good. With regard to patient comfort, 3 evaluators rated the sensor excellent and 6 rated it very good. One evaluator noted that he experienced a few issues when placing the sensor in some children and patients with very small mouths. Another evaluator, however, is very happy with the sensor, saying, “I chose DEXIS to take a full radiographic series on every patient. It was the only direct image system we tested that met that objective.”Image Quality
According to DEXIS, their digital xray system provides detailed image quality and includes image enhancement tools that increase diagnostic capabilities. When the 9 evaluators were asked to rate the system’s image quality and enhancement aids, 89% rated them as excellent to very good. One of the evaluators commented that the system’s “ClearVu and image magnification allow us to diagnose very effectively.”Overall Satisfaction
When asked to rate their overall satisfaction with the DEXIS Digital X-ray System, 89% of the evaluators rated it as excellent to very good. Commented one evaluator, “DEXIS has been very responsive to our needs.”System Includes* a highend CCD sensor* portable PC card and DEXusb connection options* DEXIS imaging software* a complete set of sensor holders and accessories* on-site training* a printed instruction manual* training tutorials on CD* a quick reference guide for the operatory* 1 year of DEXcare support.
Soredex Cranex-D Panoramic X Ray
The Soredex Cranex D with cephalometric option provides a full range of digital panoramic and cephalometric dental x-ray examinations to meet the diagnostic needs of almost any general dental or specialty practice. With it’s minimal footprint, this Soredex option will help elevate the diagnostic functionality of any dental provider.Soredex Cranex D provides a full range of high quality digital panoramic x-ray examinations to meet the diagnostic needs of almost any dental practice – all at an affordable price.Acquisition computer included
Features Soredex Cranex-D Panoramic X Ray
CRANEX D is a direct digital panoramic and cephalometric x-ray system that provides superior image quality and more diagnostic value. Available as a single or dual sensor system, the CRANEX D grows with your practice, making it a valuable addition to meet the needs of your office. It combines quality images, ease-of-use, and flexibility to make your day-to-day diagnostics easy and accurate.Benefits
The system features superb anterior image quality in panoramic imaging with its patented Variable Panoramic Collimator (VPC) by expanding the focal trough by 50% compared to traditional techniques. Additional innovative features on the unit include Automatic Collimator Selector (ACS) to easily set proper collimation for the imaging program prescribed, as well as the Automatic Exposure Setting (AES) where the system recommends proper cephalometric exposure values based on the size of the patient. These automated and optimized exposure settings maximize the practice’s workflow. CRANEX D is built for contemporary, fast-paced dental care where reliability is key.The Soredex Cranex D with cephalometric option provides a full range of panoramic and cephalometric examinations to meet the needs of almost any practice.SOREDEX has over 30 years of expertise in state-of-the-art dental imaging systems. The Soredex® Cranex D with cephalometric option provides a full range of panoramic and cephalometric examinations to meet the needs of almost any practice.
Reviews
There are no reviews yet.