Cutera Trusculpt 3D Body Sculpting A New Dimension in Body Sculpting
The rise in popularity of body sculpting can be attributed to two main factors: improved non-surgical treatment results and a population that values investing in themselves.
The truSculpt 3D body sculpting device is ideal for patients and practitioners alike. truSculpt 3D is a non-invasive, Monopolar RF system optimized to deliver Targeted, Repeatable and Uniform sculpting of problem areas for a TRU 3D result with no visual downtime. truSculpt 3D takes a multi-dimensional approach to decrease circumference and reduce fat cells, by delivering and holding clinically therapeutic temperatures to the subcutaneous adipose tissue to achieve the clinical efficacy in the shortest possible treatment time with enhanced comfort.
Glide Technique
truSculpt 3D glide technique offers consistent results – an average of 24% fat reduction, in a short treatment time over a large treatment zone.1 One 60-minute session provides clinically proven results in the most common treatment areas — the abdomen and flanks.
Targeted RF Energy
The truSculpt 3D system uses a low frequency and high conductivity radiofrequency (RF) technology for deep penetration to target the subcutaneous fat layer while maintaining a comfortable surface temperature for patients. Over a 12-week period, the damaged fat cells are slowly broken down and eliminated from the treated subcutaneous adipose tissue2.
Repeatable, Proven Outcomes
truSculpt 3D features a proprietary closed-loop temperature feedback mechanism that ensures therapeutic temperatures are met throughout each treatment. This means your patients are comfortable while achieving consistent results.
truSculpt 3D Handpieces
truSculpt 3D gives you the flexibility to non-invasively address body sculpting concerns. With truSculpt 3D’s two handpiece options (40 cm2 and 16 cm2), you can decrease circumference and eliminate unwanted fat from large and small areas.
Hand-held 2 MHz 40 cm2
For use in a gliding motion over fat pockets contained within the small, medium or large treatment templates. Handpiece covers up to a 576 cm2 treatment area on the abdomen and flanks in 60 minutes.
Hand-held 1 MHz 16 cm2
For use with a stationary placement over soft tissue in areas that are smaller than the templates. The 16 cm2 handpiece covers petite treatment areas in 5 minutes.
The ability to work specifically in the deep dermis, without damaging the epidermis, is regulated in the RF Secret by the delay time of fractional radiofrequency. The needles are inserted at a rate of milliseconds equal to a stamping process in the skin and also withdrawn immediately. Only after the needles are penetrated into the desired skin layer, is carried out for a few milliseconds, a radio frequency pulse to set heat damage. While the penetration into the skin, the needles remain always cold. In order to achieve a deep and superficial effect, the needle depths can be varied individually in the respective treatment passes.
Pollogen Divine Pro Skin RejuvenationTriPollar with DMA is a non-invasive technology which uses radiofrequency energy to generate heat through resistance in both the dermal and subcutaneous layers causing collagen fibres to contract. This creates an immediate skin-tightening effect.TriFractional RF enables effective fractional skin resurfacing, with the energy creating microwounds.Voluderm is a minimally-invasive solution that uses fine ultra-thin electrodes combined with radio-frequency to gently ablate the epidermis and heat the deeper dermal layer.
The DWX-4W goes beyond dry milling and is the epitome of wet grinding technology. It uses 4-axis simultaneous movements to wet grind precision inlays, onlays, crowns, veneers and short-span bridges from glass ceramic and composite resins.
GE LOGIQ P9 Ultrasound Machine is an extremely capable ultrasound system which provides excellent picture quality and productivity through easy to use tools across a broad range of software in a portable, ergonomic, budget-friendly system design.
Recommended for all skin types, the PicoGenesis laser procedure is used to treat:• Brown spots
• Sun damage
• Age spots
• Melasma
• Hyperpigmenation
• Pigmented lesions
Content
CUTERA TRUSCULPT 3D BODY SCULPTING
Cutera Trusculpt 3D Body Sculpting A New Dimension in Body Sculpting
The rise in popularity of body sculpting can be attributed to two main factors: improved non-surgical treatment results and a population that values investing in themselves.The truSculpt 3D body sculpting device is ideal for patients and practitioners alike. truSculpt 3D is a non-invasive, Monopolar RF system optimized to deliver Targeted, Repeatable and Uniform sculpting of problem areas for a TRU 3D result with no visual downtime. truSculpt 3D takes a multi-dimensional approach to decrease circumference and reduce fat cells, by delivering and holding clinically therapeutic temperatures to the subcutaneous adipose tissue to achieve the clinical efficacy in the shortest possible treatment time with enhanced comfort.Glide Technique
truSculpt 3D glide technique offers consistent results – an average of 24% fat reduction, in a short treatment time over a large treatment zone.1 One 60-minute session provides clinically proven results in the most common treatment areas — the abdomen and flanks.Targeted RF Energy
The truSculpt 3D system uses a low frequency and high conductivity radiofrequency (RF) technology for deep penetration to target the subcutaneous fat layer while maintaining a comfortable surface temperature for patients. Over a 12-week period, the damaged fat cells are slowly broken down and eliminated from the treated subcutaneous adipose tissue2.Repeatable, Proven Outcomes
truSculpt 3D features a proprietary closed-loop temperature feedback mechanism that ensures therapeutic temperatures are met throughout each treatment. This means your patients are comfortable while achieving consistent results.Cutera Trusculpt 3D Body SculptingtruSculpt 3D Handpieces
truSculpt 3D gives you the flexibility to non-invasively address body sculpting concerns. With truSculpt 3D’s two handpiece options (40 cm2 and 16 cm2), you can decrease circumference and eliminate unwanted fat from large and small areas.Hand-held 2 MHz 40 cm2
For use in a gliding motion over fat pockets contained within the small, medium or large treatment templates. Handpiece covers up to a 576 cm2 treatment area on the abdomen and flanks in 60 minutes.Hand-held 1 MHz 16 cm2
For use with a stationary placement over soft tissue in areas that are smaller than the templates. The 16 cm2 handpiece covers petite treatment areas in 5 minutes.Includes:
Hand-held 2 MHz 40 cm2
Hand-held 1 MHz 16 cm2Head
Key
Operators Manual
CUTERA SECRET RF 2.0CUTERA SECRET RF 2.0 MICRONEEDLING RADIO is a fractional micro-needling system (fractional radiofrequency) that exceeds the capabilities and limitations of fractional laser significantly. It is a system for extensive skin structure improvement and treatment of hyperhidrosis (radio frequency thermotherapy RFTT), based on both monopolar and fractionated on, bipolar radio frequency. An exact adjustment of the depth of the microneedles and the cold passing the epidermis allow the energy output directly into the target layer.
The needle depth is 0.5 mm to 3.5 mm can be varied, thereby opening up a wide range of treatments. The adjustable intensity of the RF energy allows for the treatment of various areas of the body with different energy performance.The ability to work specifically in the deep dermis, without damaging the epidermis, is regulated in the RF Secret by the delay time of fractional radiofrequency. The needles are inserted at a rate of milliseconds equal to a stamping process in the skin and also withdrawn immediately. Only after the needles are penetrated into the desired skin layer, is carried out for a few milliseconds, a radio frequency pulse to set heat damage. While the penetration into the skin, the needles remain always cold. In order to achieve a deep and superficial effect, the needle depths can be varied individually in the respective treatment passes.Dermal Remodeling from the Inside Out
Demand for non-surgical aesthetic procedures with little to no downtime is on the rise. More than 70% of patients are bothered by signs of aging such as fine lines and wrinkles as well as skin texture and discoloration.1Secret RF is a novel fractional radio frequency (RF) micro-needling system for tissue coagulation and hemostasis designed to stimulate and remodel collagen and address the common signs of aging. It is ideally suited for use on patients who wish to revitalize and refresh the appearance of their skin on all skin types. By adjusting the micro-needles, Secret RF can deliver energy at various depths, so that treatments can be tailored to address each patients individual concerns such as fine lines, wrinkles, acne scars, photoaging and striae at the depth required.Secret RF System
Secret RFs unique technology and customized delivery of energy enables providers to tailor treatments for a variety of skin concerns on all skin types.Customized Dermal Remodeling
Secret RF induces dermal remodeling by applying precisely controlled RF energy directly into various depths of skin from 0.5-3.5 mm – with minimally invasive micro-needles to spare the epidermis and reduce patient downtime.
Skin Revitalization and Resurfacing
Secret RF is a radio frequency (RF) fractional microneedling system that helps you deliver tailored energy to improve fine lines, wrinkles, and scars from the inside out.
Secret RF in action
Applications include fine lines and wrinkles, photoaging, scarring, acne scars, striaeSecret RF technology
Handpieces
Two sizes of treatment tips – 25 and 64 pin – give you customizable options for treating the face and body with precision and efficiency.
Power:20 W ± 20%
RF frequency:2 Mh ± 20%
Intensity:0 ~ 100 Level (10 levels)
Repeat:0.2 / 0.5 / 1/2 sec / individually.
Needle Size:0.3 mm
Info about needles:25 electric needles (5 x 5, 7.8 mm x 7.8 mm / height: 1.95 mm (standard) and 16 electric needles (4 x 4, 7.8 mm x 7.8 mm / height 2.6 mm (optional)
Treatment range:1 x 1cm
Adjustable Depth:0.5 ~5 mm (0.1 steps)
Treatment duration:50 ms ~ 950 ms
Electrical power:100 ~ 240 VAC, 50/60 Hz, 220 VAMonopolar RF
Power:520 W ± 20%
RF frequency:2 Mh ± 20%
RF electrode:monopolar
Repeat:CW
RF electrode size:15APPLICATIONSFacialsNon-surgical facelift
Skin tightening
Pore reduction
Wrinkle reduction
Skin Rejuvenation (illumination)
Acne scars
Body treatmentsScar
Keratosis pilaris (Keratosis pilaris)
Stretch marks
Pollogen Divine Pro Skin Rejuvenation
Divine Pro works via a synergised treatment of Pollogen’s patent technology VoluDerm, a fractional two-step thermal ablation process using up to 100 radiofrequency-assisted ultra-thin electrodes.This new generation of microneedling works on the process of generating micro-wounds through thermal ablation, where each individual needle delivers radiofrequency in both the epidermis and dermis without the risk of post-inflammatory hyperpigmentation and scars.The multi-dimensional platform incorporates a winning combination of clinically-proven technologies Voluderm microneedling, Tripollar RF, DMA (dynamic muscle activation) and Trifractional RF, and is indicated for skin tightening, skin resurfacing, dermal volumisation, muscle re-education, acne scarring and stretch marks.TriPollar with DMA is a non-invasive technology which uses radiofrequency energy to generate heat through resistance in both the dermal and subcutaneous layers causing collagen fibres to contract. This creates an immediate skin-tightening effect.TriFractional RF enables effective fractional skin resurfacing, with the energy creating microwounds.Voluderm is a minimally-invasive solution that uses fine ultra-thin electrodes combined with radio-frequency to gently ablate the epidermis and heat the deeper dermal layer.These multi-dimensional treatments work together to renew the deep dermis, mid-dermis and epidermis to provide a holistic approach for repairing signs of ageing.Pollogen Divine Pro Skin Rejuvenation Minimal downtime minimal discomfort – how it works:Unique penetration method: Instead of mechanical penetration of the needles, which can produce a painful sensation, our RF microneedling technology creates channels simultaneously with the penetration of the needles which is driven by continuous RF. This results in efficient dermal effect, minimal bleeding and downtime.Ultrathin needles (150 micron): Some of the thinnest needles on the market with the optimal length for efficacy; these needles ensure a full-length smooth insertion into the channels created by the RF, reaching the exact layer of the skin where maximum efficacy is achieved. The thin needles allow for optimal energy density, providing higher efficacy at lower energy levels, thus reducing discomfort during treatment.Quicker treatments with no anaesthetics: Thanks to the combination of RF-first penetration and thin needles, no mechanical force and less repeated passes are required to ensure even coverage. As a result, pain is minimised, therefore anaesthesia is not required to achieve results.High safety profile: The unique RF-first technology ensures standardised treatment protocol without dependency on user expertise. The penetration mode induces minimal damage to the epidermis and therefore reduces the risk of unwanted adverse events.TriFractional RFTriFractional RF energy rejuvenates the outer epidermis layer, by creating micro-wounds which trigger the body’s natural healing response mechanism.VoluDermVoluDerm provides a safe and effective penetration of the epidermis for controlled heating targeting deep dermis. This minimally invasive treatment uses fine micro-needles while applying RF to volumize the deep dermal layer. The micro-needles stimulate the body to naturally produce hyaluronic acid, new collagen and elastin.TriPollar with Dynamic Muscle Activation (DMA)TriPollar RF uses radiofrequency to generate heat in both the dermal and subcutaneous layers leading to an immediate skin tightening effect. Collagen regeneration then provides a long term effect. Dynamic Muscle Activation energy stimulates the facial muscles resulting in lifting and toning, accelerating lymphatic circulation and optimizing detoxification.Pollogen Divine Pro Skin Rejuvenation purchase include :
The Main DIVINE PRO unit
Voluderm & Trifractional Hand-piece
TriPollar with DMA Hand-piece
Power lead and adapter plug
Operational Manual
Training manual x 2
12 month manufacturers warranty
Trainings days for your staff x 2
Event Day to market your DIVINE PRO treatments
In addition, you’ll receive a rich array of consumables and marketing material
5 x Trifractional Tips
5 x GEN36 Tips
5 x GEN12 Tips
1 x TriPollar Gel
1 x REFORM Glycolic Acid Cleanser
1 x REFORM Hyaluronic Serum
1 x Pint of Sale Marketing USB
Roland DWX-4W Dental Milling UnitReliable High PerformanceIn addition to milling on X, Y and Z axes, the DWX-4W rotates pin-type blocks 360 degrees on a fourth axis (A axis) to support undercuts. The ball screw-driven 4-axis control allows for smooth, high-precision machining. The DWX-4W’s high-performance 60,000-RPM Jaeger spindle is known for its reliability and supports precision milling of glass ceramics and composite resin. With its multi-pin clamp, the DWX-4W is a wet dental milling machine that can mill up to three different pin-type materials continuously in one operation. As a result, prosthetics for up to three different patients can be produced in a single production run, saving time, labour and costs.Features and Benefits :Simultaneous 4-axis machining4-state Automatic Tool Changer (ATC)60,000 RPM Jaeger DentaDrive SpindleCAM software bundledVirtual Machine Panel (VPanel)Fully-integrated water and coolant filtration systemCoolant leakage & flow monitoring sensorsTool life monitoringMail notification systemSummary• Maximum Convenience
• Virtual Machine Panel
• Progress and Error Alerts for Error-Free Milling
• Coolant Compartment and Water Filtration
• Clean Cutting Area for Precision Milling
• Economical Open Architecture
• CAM Software Included
• Growth Potential
• Peace of MindEven novice users can quickly set up the DWX-4W and begin creating prosthetics the same day the machine arrives. Ease of use features include:Simple one-button design.colour-code LED status lights signal current job progress.Fully integrated pump and coolant system, with water collection filtration for maintaining a clean and efficient workspace.The Virtual Machine Panel (VPanel) allows users to configure settings from their computers, send CAM data the the DWX-4Wfor production, and track milling progress.Combine DWX Devices for a Complete Dental SolutionPair the DWX-51D and DWX-4W for the most flexible and productive dry and wet milling solution. using both dry and wet DWX devices gives you the technology and confidence to take on the maximum amount of glass ceramics and zirconia restorations. in contrast to dry and wet combo devices, a dedicated DWX dry and wet solution eliminates the switch back-and-forth through processes and the hours of cleaning in-between jobs.Summary:Capable of milling glass ceramics and composite resinCombines 4-axis milling with simple one-button operationsHigh-performance Jaeger DentaDrive spindleMulti pin-clamp to mil up to three different pin-type materials continuously4-Station automatic Tool Changer to change grinding burs for continuous productioncolour-code LED status lights signal machine errors and milling progressconnect up to four DWX devices to one computerAutomatic machine calibrationPair the DWX-51d and DWX-4W for the most flexible and productive dry and wet solution
GE LOGIQ P9 Ultrasound Machine
GE LOGIQ P9 is Personalized, Patient-centric and Practical ultrasound system.
Ultrasound users love the simplicity of GE Logiq p9. You can easily obtain diagnostic images as well as access the features. The system delivers comprehensive exams and consistent images to help you make confident decisions. It is also a budget-friendly ultrasound machine that even small clinics can afford.
GE Logiq p9 Ultrasound System is simple because of its console controls as well as digital user interface. The features allow you to customize your workflow according to your specific needs. Below is a discussion regarding how GE Logiq p9 operates. Find out more!
What is GE Logiq p9?
It is an ultrasound machine that manages diverse clinical needs. It provides clear images without needing a lot of manual operation. The quality probes of GE Logiq p9 can perform different applications including vascular, abdominal, musculoskeletal, small parts as well as GYN/OB imaging.
GE Logiq p9 also allows you to make use of advanced imaging tools such as Elastography, B-Flow, Stress echo, and 3D/4D.The machine adjusts to your preferences, needs and working style to fit your busy schedule. The manufacturers design it with the aim of providing user comfort.The crucial features of GR logic p9Advanced transducers
This ultrasound machine makes use of advanced transducer technology which improves the quality of images. It offers a range of transducers that fulfill the needs of different specialists. Remember to disinfect the probes with a wipe that cannot damage the lens.
Auto-optimization
You can optimize images using this function. It works according to the preset levels and allows you to select what you prefer when it comes to contrast enhancement. The function is available in both multi and single images as well as in spectral Doppler.
B-Flow GE LOGIQ P9 Ultrasound Machine
The B-flow makes it easy for you to visualize any irregularities in the vessel wall and other organs like the kidneys, liver, bladder or spleen. It makes use of grayscale imaging to show the flow of blood with varying gray intensities. It works without depending on the user or even the scanning angle. It provides a high spatial resolution and frame rate.
Speckle reduction imaging
GE Logiq 9 can operate with minimal noise thanks to this feature. It is responsible for the reduction of speckle noise in images. Such noise affects the fine details and edges of images, limiting the contrast resolution. By reducing the sound, you can easily make a proper diagnosis.
Spatial compounding imaging
This system lets you acquire real-time data from different insonation angles. It also boosts anatomical details and minimizes speckle artifacts. You can also view small parts with the help of the coded harmonic imaging which improves near field resolution. It allows you to image even difficult patients.
GE is a world-class developer that is famous for creating good quality ultrasound machines. Though the company has other versions, GE Logiq p9 is the latest system in the series. They set low prices for their ultrasound machines to make them affordable to all doctors including the ones that work in remote areas. Purchase GE logic p9 today and enjoy customizable features that can transform your workflow.
GE Logiq P9 Ultrasound Equipment Applications
4D
Abdominal
Anesthesia
Breast
Cardiac
Cardiovascular Imaging
Emergency Medicine
General Imaging
Musculoskeletal
OB-GYN
Pediatric
Peripheral Vascular
Small Parts
Stress Echo
Superficial
Thyroid
Urology
Vascular
Venous
TRANSDUCERS / PROBES ( Free 5 Transducers )
12L-RS
12S-RS
3Sc-RS
6S-RS
8C-RS
9L-RS
BE9CS-RS
C1-5-RS
E8C-RS
E8Cs-RS
L10-22-RS
L12n-RS
L3-9i-RS
L4-12T-RS
L6-12-RS
L8-18i-RS
ML6-15-RS
P6D (Pencil)
P8D
RAB2-6-RS
RIC5-9A-RS
Cutera Enlighten III Pico-Nano Second Tattoo RemovalThis next-generation PicoGenesis laser is an advanced, non-thermal way to treat pigmentary concerns, PicoGenesis harnesses a non-thermal, photomechanical effect paired with ultra-short—one trillionth of a second long—pulse durations. The perfect blend of technologies creates shockwaves that shatter pigments in the skin without damaging the surrounding tissue, while inducing dermal disruption and remodelling for true skin revitalisation.Unlike conventional laser toning that requires up to 15 treatment sessions and often lead to adverse side effects such as redness, swelling and itching. Thanks to the incorporated picosecond technology, in as few as three sessions you will experience a dramatic improvement in the reduction of pigmentation as well as a brighter, more uniform complexion in just 20 minutes—and all with no downtime! With entirely changeable parameters, this game-changing treatment an be used to benefit even the most challenging skin concerns, and can also effectively remove all colours of tattoos.Recommended for all skin types, the PicoGenesis laser procedure is used to treat : Cutera Enlighten III Pico-Nano Second Tattoo Removal• Brown spots
• Sun damage
• Age spots
• Melasma
• Hyperpigmenation
• Pigmented lesions
enlighten III combines multiple wavelengths (1064 nm, 532 nm and 670 nm) and picosecond + nanosecond pulse durations (750/660 ps + 2 ns) in a single platform for the treatment of unwanted multicolor tattoos, epidermal and dermal pigment, and skin revitalization across all skin types.
Unlike conventional laser toning that require up to 15 treatment sessions and often lead to unpredictable results, PICO Genesis harnesses the power and flexibility of enlighten SR combined with its technical benefits in a dual delivery procedure to selectively shatter pigment and induce dermal disruption and remodeling for true skin revitalization in fewer than 3 sessions.“The enlighten laser system has been a game changer for my tattoo removal practice. I feel much more confident that we can deliver patients the results they have been wanting since laser tattoo removal was first invented.”
Reviews
There are no reviews yet.