PERKASA MEDICAL

Free shipping worldwide. Orders over $200
Availability: In Stock

AGILENT 6460C TRIPLE QUAD LCMS WITH 1260 HPLC

$48,500.00

The Agilent 6460C Triple Quad LCMS with 1260 Infinity HPLC System is equipped with Agilent Jet Stream Technology to enable enhanced sensitivity. The 6460 provides a fast and robust solution to simultaneously quantify, screen, and confirm analytes in the laboratory.

Other people want this. 15 people have this in their carts right now.

Description

AGILENT 6460C TRIPLE QUAD LCMS WITH 1260 HPLC

The AGILENT 6460C TRIPLE QUAD LCMS WITH 1260 HPLC is equipped with Agilent Jet Stream Technology to enable enhanced sensitivity. The 6460 provides a fast and robust solution to simultaneously quantify, screen, and confirm analytes in the laboratory.
Features:

Excellent sensitivity for many applications
1 ms dwell time with no collision cell cross talk
Very fast polarity switching for multi-analyte studies
Dynamic Multiple Reaction Monitoring (d.M.R.M) to maximize MRM efficiency
Triggered Multiple Reaction Monitoring (t.M.R.M) for simultaneous quantitation and confirmation

The Agilent Infinity Binary LC offers the most flexibility for solvent selection and automation in HPLC method development, research, and all HPLC applications requiring continuous access to a wide range of solvent choices. The availability to rapidly switch between methods using different solvents and the capability of using binary, ternary or quaternary solvent gradients make the Agilent 1260/1290 Infinity Binary LC the most flexible system on the market.

Includes:

Agilent 6460 Triple Quad LC/MS/MS
Jet Stream ESI Source
Mass Range: m/z 5 – 3,000
Agilent 1260/1290 HPLC
Solvent Tray
Degasser
Autosampler
Binary Pump
Thermostat
Thermostatted Column Compartment (TCC)
Mechanical Pump
Data System
Warranty Coverage

Options:

MS Sample Introduction
Generator
Air Compressor
Workbench
Installation & Familiarization
Extended Warranty

Includes:

Solvent Tray
Degasser
Auto sampler
Binary Pump
Thermostat
Thermos-tatted Column Compartment (TCC)

Specifications:

AGILENT 6460C TRIPLE QUAD LCMS WITH 1260 HPLC

MRM Sensitivity Signal-to-Noise: 1pg of reserpine injected: S/N>10,000:1
MRM Sensitivity Signal-to-Noise: 1pg of chloramphenicol injected: S/N>3,000:1
Mass range: m/z 5 – 3,000
Polarity switching: 30 ms
Mass resolution: Full width at half maximum 0.7Da
Mass accuracy: 0.1 DA from 5 – 1,000 m/z, 0.01% from 1,000 – 2,000 m/z, 0.02% from 2,000 – 3,000 m/z
Mass stability: < 0.1 DA in 24 h
Dynamic range: > 6.0 × 106
Maximum scan rate: 12,500 Da/s
Minimum M.R.M dwell time: 1 ms
MRM transitions: 450 per time segment, > 13,500 ion transactions per method
Dynamic M.R.M transitions: 4,000 ion transitions per method
Collision cell ion clearance: < 1 ms

Features:

  • Greater signal and reduced noise – Agilent Jet Stream technology uses super-heated nitrogen to improve ion generation and desolvation
  • Efficient analysis – fast MRM speeds allow for analysis of over 100 overlapping compounds in a given retention time window
  • Screen, confirm and quantify – Triggered MRM (tMRM) combines fast and sensitive MRM quantitation with the generation of a product ion spectrum for library searching and compound screening and confirmation
  • Fast polarity switching for analysis of both positive and negative ions

 

 

Reviews

There are no reviews yet.

Be the first to review “AGILENT 6460C TRIPLE QUAD LCMS WITH 1260 HPLC”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsAGILENT 6460C TRIPLE QUAD LCMS WITH 1260 HPLC removeAvante Integra SP VSO2 Portable Anesthesia Machine removeInMode Contoura RF Body Contouring removeALMA SOPRANO XLI WITH SHR DIODE & NIR FOR SALE remove2017 InMode Aesthetics Contoura Cellulite Reduction System removeCutting Edge MLS M6 Laser Therapy Unit For Sale remove
NameAGILENT 6460C TRIPLE QUAD LCMS WITH 1260 HPLC removeAvante Integra SP VSO2 Portable Anesthesia Machine removeInMode Contoura RF Body Contouring removeALMA SOPRANO XLI WITH SHR DIODE & NIR FOR SALE remove2017 InMode Aesthetics Contoura Cellulite Reduction System removeCutting Edge MLS M6 Laser Therapy Unit For Sale remove
Image
SKU
Rating
Price $48,500.00 $7,500.00 $14,760.00 $10,950.00 $15,820.00 $12,830.00
Stock
Availability
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionThe Agilent 6460C Triple Quad LCMS with 1260 Infinity HPLC System is equipped with Agilent Jet Stream Technology to enable enhanced sensitivity. The 6460 provides a fast and robust solution to simultaneously quantify, screen, and confirm analytes in the laboratory.

Features

  • Small and compact unit ideal for office-based anesthesia
  • Lightweight machine weighs only 26 pounds!
  • Three gas machine (O2, N2O and Air)
  • Mechanical anti-hypoxic device and air/N2O interlock
  • Retractable top handle for easy transport
  • Conveniently located side gas ports
  • Many ventilator options available.
  • Selectatec-compatible vaporizer mounting system
  • Optional carrying case with retractable handle and casters
  • Optional mobile trolley with shelf
  • Holds 1 vaporizer
  • Specifically designed to accommodate low flow
  • Auxiliary O2 flowmeter port
  • Recessed flush valve
  • Also available with MRI-compatible Penlon Nuffield Ventilator
Contoura by Inmode Non-invasive body contouring technology proven in peer reviewed and published human studies to both permanently kill adipose tissue and contract the skin. Unlike other body contouring devices (which may carry high per procedure cost) Contoura has zero consumable costs or pulse counters MODEL: InModeRF REF: AG606970A **Excellent Condition** INCLUDES: – MiniFX Handpiece – BodyFX Handpiece – PLUS(Forma) Handpiece – Footswitch – Full Manual and Display info
Alma Soprano XLi with SHR Diode & NIR Handpieces;  Excellent Cosmetic and Operating Condition, Single Owner, Full Maintenance Service, Calibration, and Replacement of Flow Switch Performed on 08/30/2019, Record Available Upon Request; Original SHR Total Pulse Count = 10,241,483; NIR Total Pulse Count =2,545,712 ;
Includes:
(1) 810 Diode Handpiece with Sapphire Dual Chill Tip and 12×10 mm Spot Size,
(1) NIR Skin Tightening Handpiece,
(2) Keys,
(1) Footswitch,
(1) Operator Manual,
(1) Consult Book,
(1) Water Refill Kit,
(1) Warning Sign, and 90 Day Warranty.km
2017 InMode Aesthetics InMode Contoura Cellulite Reduction System – with 3 Handpieces; Manufactured on 03/22/2017; Excellent Operating & Cosmetic Condition, Single Owner, Used for approximately 60+ Hours; SW Version: 2.31CTR; Reason for Selling: Downsizing; Handpieces Included: BodyFX, MiniFX, & Forma Plus; Also Includes: Footswitch.The M6 therapy laser is a robotized multi-target device designed to treat patients suffering pathologies affecting a wide area, and to perform automatic applications. The distinctive feature of the M6 is the innovative multi-target functioning. Thanks to the features of the exclusive MLS multi-diodic optical group, a wide area is treated instantaneously helping to produce an immediate response of the treated tissues. The results are better and faster than with the scanning modality of traditional laser therapy products.
ContentAGILENT 6460C TRIPLE QUAD LCMS WITH 1260 HPLCThe AGILENT 6460C TRIPLE QUAD LCMS WITH 1260 HPLC is equipped with Agilent Jet Stream Technology to enable enhanced sensitivity. The 6460 provides a fast and robust solution to simultaneously quantify, screen, and confirm analytes in the laboratory. Features:Excellent sensitivity for many applications 1 ms dwell time with no collision cell cross talk Very fast polarity switching for multi-analyte studies Dynamic Multiple Reaction Monitoring (d.M.R.M) to maximize MRM efficiency Triggered Multiple Reaction Monitoring (t.M.R.M) for simultaneous quantitation and confirmationThe Agilent Infinity Binary LC offers the most flexibility for solvent selection and automation in HPLC method development, research, and all HPLC applications requiring continuous access to a wide range of solvent choices. The availability to rapidly switch between methods using different solvents and the capability of using binary, ternary or quaternary solvent gradients make the Agilent 1260/1290 Infinity Binary LC the most flexible system on the market.Includes:Agilent 6460 Triple Quad LC/MS/MS Jet Stream ESI Source Mass Range: m/z 5 – 3,000 Agilent 1260/1290 HPLC Solvent Tray Degasser Autosampler Binary Pump Thermostat Thermostatted Column Compartment (TCC) Mechanical Pump Data System Warranty CoverageOptions:MS Sample Introduction Generator Air Compressor Workbench Installation & Familiarization Extended WarrantyIncludes:Solvent Tray Degasser Auto sampler Binary Pump Thermostat Thermos-tatted Column Compartment (TCC)Specifications:AGILENT 6460C TRIPLE QUAD LCMS WITH 1260 HPLCMRM Sensitivity Signal-to-Noise: 1pg of reserpine injected: S/N>10,000:1 MRM Sensitivity Signal-to-Noise: 1pg of chloramphenicol injected: S/N>3,000:1 Mass range: m/z 5 – 3,000 Polarity switching: 30 ms Mass resolution: Full width at half maximum 0.7Da Mass accuracy: 0.1 DA from 5 – 1,000 m/z, 0.01% from 1,000 – 2,000 m/z, 0.02% from 2,000 – 3,000 m/z Mass stability: < 0.1 DA in 24 h Dynamic range: > 6.0 × 106 Maximum scan rate: 12,500 Da/s Minimum M.R.M dwell time: 1 ms MRM transitions: 450 per time segment, > 13,500 ion transactions per method Dynamic M.R.M transitions: 4,000 ion transitions per method Collision cell ion clearance: < 1 msFeatures:
  • Greater signal and reduced noise – Agilent Jet Stream technology uses super-heated nitrogen to improve ion generation and desolvation
  • Efficient analysis – fast MRM speeds allow for analysis of over 100 overlapping compounds in a given retention time window
  • Screen, confirm and quantify – Triggered MRM (tMRM) combines fast and sensitive MRM quantitation with the generation of a product ion spectrum for library searching and compound screening and confirmation
  • Fast polarity switching for analysis of both positive and negative ions
  
Avante Integra SP VSO2 Portable Anesthesia MachineThe Avante Integra SP VSO2 is a fully-functional, compact and portable anesthesia system in a lightweight package. The Integra SP VSO2 anesthesia system is compact enough for the smallest surgery or imaging suite, and is fully portable.Easily transport the Avante Integra SP VSO2 by using the retractable handle, located conveniently on top of the unit. Side-located gas ports allow clinicians to safely and efficiently set up the machine.In keeping with Avante's commitment to quality, all Integra SP anesthesia systems include a two-year manufacturer's warranty. The Avante Integra SP VSO2 is available with a hardshell carrying case, complete with casters and a retractable handle. A convenient mobile trolley with a sturdy built-in shelf is also available.Features
  • Small and compact unit ideal for office-based anesthesia
  • Lightweight machine weighs only 26 pounds!
  • Three gas machine (O2, N2O and Air)
  • Mechanical anti-hypoxic device and air/N2O interlock
  • Retractable top handle for easy transport
  • Conveniently located side gas ports
  • Many ventilator options available.
  • Selectatec-compatible vaporizer mounting system
  • Optional carrying case with retractable handle and casters
  • Optional mobile trolley with shelf
  • Holds 1 vaporizer
  • Specifically designed to accommodate low flow
  • Auxiliary O2 flowmeter port
  • Recessed flush valve
  • Also available with MRI-compatible Penlon Nuffield Ventilator

Physical Weight & Dimensions

  • Height: 13.8 inches (35 cm)
  • Width: 19.7 inches (50 cm)
  • Depth: 7.9 inches (20 cm)
  • Weight (without vaporizer): 26 lbs (12 kg)

Flowmeters

  • Flow Range: Oxygen / Air: 0 - 10 L/min
  • Flowmeter Accuracy:  ± 2.5% full scale reading
  • Flowmeter construction and dimensions: Tubes and floats are matched, and must not be interchanged. Flowmeter tubes have antistatic coatings

Oxygen Failure Warning Devices

  • Gas system whistle
  • Visual indicator, direct pressure operated

Oxygen Flush

  • Button on front edge worksurface
  • The system supplies 35 - 75 L/min when the button is fully depressed

Mechanical AHD System

  • Minimum oxygen concentration: 30% ± 3% ( total O2 + N2O flow)
  • Basal flow - oxygen: 100 - 200 mL/min

Environmental

  • Operating Temperature: + 10 to 38°C (50 to 100°F)
  • Operating Atmospheric Pressure Range: 70 to 106 kPa
  • Operating Altitude: 2438 m (8000 ft) maximum
  • Operating Humidity: 10 - 85% R.H. non-condensing
  • Transport / Storage Temperature: -5 to 40°C (23 to 104°F)
  • Cleaning: Wipe external surfaces with dry or damp cloth. Use mild soap, or disinfectant solution if necessary.

InMode Contoura RF Body Contouring with BodyFX, MiniFX, & Forma Plus

BodyFX Vacuum:300 – 500 mBar RF Output Frequency:Up to 50 W Output Frequency:1 MHz Temperature Cut-Off:Real time temperature monitoring and cut off operator selectable to 43°C MINIFX – Only Available on Newest Generation Contoura’s Chamber Size:1 inch x 1 inch RF Output Frequency:Up to 50 W Output Frequency:1 MHz Negative Pressure:Up to 500 mBar Temperature Cut-Off:Real time temperature monitoring and cut-off. Operator selectable up to 43°C PLUS RF Output Frequency: Up to 65 W Output Frequency: 1 MHz Temperature Cut-Off: Real time temperature measurements set by operator up to 43°C FULL BODY CONTOURING EXPERIENCE Contoura is the reshaping solution to maximize patient results.InMode Contoura RF Body Contouring with BodyFX, MiniFX, & Forma PlusWORKSTATIONS Body contouring is one of the most in-demand aesthetic treatments. In many cases, patients are looking for improvements in body shape without surgical intervention 1. Contoura is a non-invasive body contouring solution that provides treatments that can be done during a lunchtime break.Contoura addresses: Body Reshaping, Cellulite Reduction and Skin Contraction. The Contoura is the ONLY non-invasive body contouring device proven in peer reviewed and published human studies to both permanently kill adipose tissue and contract the skin.PRACTICE BENEFITS Unlike other body contouring devices (which may carry high per procedure cost), Contoura has zero consumable costs or pulse counters. 4 Contoura is a business solution that allows you to grow your patient base without having to worry about ongoing fees.The use of radio frequency allows owners to provide both skin contraction and fat treatments, of all body areas, in one device. 5 This provides multiple revenue streams to a practice’s bottom line. This provides multiple revenue streams to a practice’s bottom line.1. According to the ASAPS 2017 statistical report, non-surgical fat reduction was listed as the third most performed procedure in 2017, after Botox and fillers. Source 2. Treatments take anywhere between 20-60 minutes. A series of 6-8 treatments is recommended. 3. Peer Reviewed Source 4. BodyFX is clinically proven to contract skin and reduce fat.BODYFX The first and only non-invasive body contouring technology proven in peer reviewed and published human studies to both permanently kill adipose tissue and contract the skin.HOW DOES IT WORK BodyFX is the first and only non-invasive body contouring and cellulite technology proven in peer reviewed and published human studies to both permanently kill adipose tissue and contract the skin *. BodyFX addresses problematic fatty tissue in larger body areas such as the abdomen, back (flanks), and thighs. BodyFX works by using different clinically proven modalities including radio-frequency energy and negative pressure applied to the skin and underlying fat.BODYFX Benefits Acquire. Control. Extend. Technology to safely optimize peak energy. Pre-heating of tissue reduces threshold for selective apoptosis of fat cells. Sophisticated tissue temperature and impedance monitoring achieves and maintains optimal temperature end points to prevent atrophic damage. Active temperature monitoring and control with cut-offs for unprecedented safety, virtually eliminating risk of thermal injury.MINIFX – Only Available on Newest Generation Contoura’s A new, non-invasive solution to reduce the unsightly appearance of cellulite in smaller areas like the arm, neck and knees.HOW DOES IT WORK MiniFX is a non-invasive contouring and cellulite technology that delivers a combination of clinically proven modalities, similar to the BodyFX, however, addresses problematic fatty tissue in smaller areas like the neck , arms, and knees.MINIFX BENEFITS Acquire. Control. Extend. Technology to safely optimize peak energy. Pre-heating of tissue reduces threshold for selective apoptosis of fat cells. Sophisticated tissue temperature and impedance monitoring achieves and maintains optimal temperature end points to prevent atrophic damage. Active temperature monitoring and control with cut-offs for unprecedented safety virtually eliminating risk of thermal injury.PLUS Stimulates the formation of new collagen and improves the skin’s elasticity for long-lasting and remarkable results.HOW DOES IT WORK Plus is a non-invasive sub-dermal heating applicator that stimulates sub-cutaneous tissue. Radio-frequency energy flows uniformly between the electrodes to provide a comfortable thermal experience, built-in temperature controls allow for the attainment of clinically proven optimal temperatures without concerns of hot spots or under treatment.PLUS Benefits Acquire: Forma has a temperature sensor built into the hand piece which reads skin surface temperature 1000 times per second, allowing clinicians to acquire skin temperature in real time. Control: Software algorithm allows unprecedented safety of RF delivery. The “cut off temperature” feature reduces RF energy automatically when the hand piece senses that the required skin temperature has been reached. Extend: Clinical evidence suggests prolonged exposure to temperature above 40°C is advantageous for optimal clinical outcomes. Only InMode’s A.C.E. technology allows you to utilize therapeutic temperatures safely and efficiently.

ALMA SOPRANO XLI WITH SHR DIODE & NIR

2012 Alma Soprano XLi with SHR Diode & NIR Handpieces; Manufactured 10/2012; Excellent Cosmetic and Operating Condition, Single Owner, Full Maintenance Service, Calibration, and Replacement of Flow Switch Performed on 08/30/2017, Record Available Upon Request; Original SHR Total Pulse Count = 10,241,483; NIR Total Pulse Count =2,545,712 ;
Includes:
(1) 810 Diode Handpiece with Sapphire Dual Chill Tip and 12×10 mm Spot Size,
(1) NIR Skin Tightening Handpiece,
(2) Keys,
(1) Footswitch,
(1) Operator Manual,
(1) Consult Book,
(1) Water Refill Kit,
(1) Warning Sign, and 90 Day Warranty.km
Product Specifications
Light SourceDiode (continuous wave)
Wavelength810 nm
FluenceUp to 120 J/cm2
Pulse Duration10 – 1,350 ms
Spot Size12 x 10 mm
Repetition RateUp to 10 Hz SHR Mode, 3 Hz Pulsed Mode
CoolingDualChill contact cooling, plus integrated adapter for Zimmer Cryo 5
Electrical120/230 VAC, 20/10 A, 50/60 Hz
Dimensions20″ x 22.4″ x 47″
Weight110 lbs
 
Manufacturer Notes
Virtually painless hair removal

Like earlier generations of the Soprano Family, The Soprano XL is the perfect solution to differentiate your practice in today’s cluttered laser hair removal market. Revolutionary pain-free Soprano treatments have redefined laser hair removal using the gold standard 810-nm diode and Alma’s IN-Motion technology. The Soprano’s virtually pain-free hair removal offers:

– Gold standard 810-nm laser diode provides reliable results
– Sapphire DualChill tip and optional Zimmer Cryo 5 adapter
– Permanent hair reduction of all pigmented hair on all skin types, including tanned skin
– IN-Motion technology for virtually pain-free hair removal
– Faster treatment times – huge 12×10 mm spot, up to 10 Hz repetition rate
– Low cost of ownership with no disposables required
– Easy to operate

The Soprano Family of platforms are the ideal standalone hair removal system that is safe, reliable, easy to use – and virtually painless. Through patient-friendly Pain-Free, Hair-Free hair removal procedures, the Soprano adds a proven revenue stream to your practice quickly and easily, as well as deep heating treatments through its NIR handpiece. Alma Lasers supports your Soprano investment through the Alma Lasers Marketing Assistance (A.L.M.A.) program, Office by Alma marketing materials, and an ongoing schedule of training programs.

Near-Infrared (NIR) module
Dermal heating through uniform energy distribution, effective for treating minor muscle pain, joint stiffness and minor muscle strains. The Soprano’s NIR offers:
Fast dermal heating – huge 18 cm2 spot
Easy to use
2017 InMode Aesthetics Contoura Cellulite Reduction System
BodyFX Vacuum:300 – 500 mBar RF Output Frequency:Up to 50 W Output Frequency:1 MHz Temperature Cut-Off:Real time temperature monitoring and cut off operator selectable to 43°C MINIFX – Only Available on Newest Generation Contoura’s Chamber Size:1 inch x 1 inch RF Output Frequency:Up to 50 W Output Frequency:1 MHz Negative Pressure:Up to 500 mBar Temperature Cut-Off:Real time temperature monitoring and cut-off. Operator selectable up to 43°C PLUS RF Output Frequency: Up to 65 W Output Frequency: 1 MHz Temperature Cut-Off: Real time temperature measurements set by operator up to 43°C
FULL BODY CONTOURING EXPERIENCE Contoura is the reshaping solution to maximize patient results.WORKSTATIONS Body contouring is one of the most in-demand aesthetic treatments. In many cases, patients are looking for improvements in body shape without surgical intervention 1. Contoura is a non-invasive body contouring solution that provides treatments that can be done during a lunchtime break.Contoura addresses: Body Reshaping, Cellulite Reduction and Skin Contraction. The Contoura is the ONLY non-invasive body contouring device proven in peer reviewed and published human studies to both permanently kill adipose tissue and contract the skin.PRACTICE BENEFITS 2017 InMode Aesthetics Contoura Cellulite Reduction System Unlike other body contouring devices (which may carry high per procedure cost), Contoura has zero consumable costs or pulse counters. 4 Contoura is a business solution that allows you to grow your patient base without having to worry about ongoing fees.The use of radio frequency allows owners to provide both skin contraction and fat treatments, of all body areas, in one device. 5 This provides multiple revenue streams to a practices bottom line. This provides multiple revenue streams to a practices bottom line.1. According to the ASAPS 2017 statistical report, non-surgical fat reduction was listed as the third most performed procedure in 2017, after Botox and fillers. Source 2. Treatments take anywhere between 20-60 minutes. A series of 6-8 treatments is recommended. 3. Peer Reviewed Source 4. BodyFX is clinically proven to contract skin and reduce fat.BODYFX The first and only non-invasive body contouring technology proven in peer reviewed and published human studies to both permanently kill adipose tissue and contract the skin.HOW DOES IT WORK BodyFX is the first and only non-invasive body contouring and cellulite technology proven in peer reviewed and published human studies to both permanently kill adipose tissue and contract the skin *. BodyFX addresses problematic fatty tissue in larger body areas such as the abdomen, back (flanks), and thighs. BodyFX works by using different clinically proven modalities including radio-frequency energy and negative pressure applied to the skin and underlying fat.BODYFX Benefits Acquire. Control. Extend. Technology to safely optimize peak energy. Pre-heating of tissue reduces threshold for selective apoptosis of fat cells. Sophisticated tissue temperature and impedance monitoring achieves and maintains optimal temperature end points to prevent atrophic damage. Active temperature monitoring and control with cut-offs for unprecedented safety, virtually eliminating risk of thermal injury.MINIFX – Only Available on Newest Generation Contoura’s A new, non-invasive solution to reduce the unsightly appearance of cellulite in smaller areas like the arm, neck and knees.HOW DOES IT WORK MiniFX is a non-invasive contouring and cellulite technology that delivers a combination of clinically proven modalities, similar to the BodyFX, however, addresses problematic fatty tissue in smaller areas like the neck , arms, and knees.MINIFX BENEFITS Acquire. Control. Extend. Technology to safely optimize peak energy. Pre-heating of tissue reduces threshold for selective apoptosis of fat cells. Sophisticated tissue temperature and impedance monitoring achieves and maintains optimal temperature end points to prevent atrophic damage. Active temperature monitoring and control with cut-offs for unprecedented safety virtually eliminating risk of thermal injury.PLUS Stimulates the formation of new collagen and improves the skin’s elasticity for long-lasting and remarkable results.HOW DOES IT WORK Plus is a non-invasive sub-dermal heating applicator that stimulates sub-cutaneous tissue. Radio-frequency energy flows uniformly between the electrodes to provide a comfortable thermal experience, built-in temperature controls allow for the attainment of clinically proven optimal temperatures without concerns of hot spots or under treatment.PLUS Benefits Acquire: Forma has a temperature sensor built into the hand piece which reads skin surface temperature 1000 times per second, allowing clinicians to acquire skin temperature in real time. Control: Software algorithm allows unprecedented safety of RF delivery. The cut off temperature” feature reduces RF energy automatically when the hand piece senses that the required skin temperature has been reached. Extend: Clinical evidence suggests prolonged exposure to temperature above 40°C is advantageous for optimal clinical outcomes. Only InMode’s A.C.E. technology allows you to utilize therapeutic temperatures safely and efficiently.

Cutting Edge MLS M6 Laser Therapy Unit

The M6 therapy laser is a robotized multi-target device designed to treat patients suffering pathologies affecting a wide area, and to perform automatic applications. The distinctive feature of the M6 is the innovative multi-target functioning. Thanks to the features of the exclusive MLS multi-diodic optical group, a wide area is treated instantaneously helping to produce an immediate response of the treated tissues. The results are better and faster than with the scanning modality of traditional laser therapy products.Technical Features Robotized optical group with 3 MLS sources – power up to 3.3 W 5 cm diameter target area highlighted by high-efficiency red light LEDs Back-lit graphic touch-screen display Simultaneous management of two independent channels MLS pulse modulation frequency from 1 to 2000 Hz with 1 Hz steps Power level 50% and 100% Variable or fixed duty cycle Treatment duration from 1″ to 99’59” with 1″ steps Automatic calculation of the emitted energy according to the set parameters Alarms and Safety Features Laser emission warning light Interlock (can be temporarily disabled) Acoustic signal for the beginning and the end of the therapy, and for each treatment second (can be disabled) Password to operate the device Language option (Italian, English, German, Spanish) Dimensions and Weight 27 x 17 x 62 inches; 95 lbsPower Supply 115/230V~ 50/60Hz 150VACUTTING EDGE MLS M6 Laser Therapy UnitTalk to your specialist. Since 1983 we have been working to be the reference point in Laser Therapy and Magnetotherapy in many areas: from physiotherapy to rehabilitation, from the management of muscle and joint pain to sports medicine. The result of our work allows us today to be recognized as an international leader in the knowledge and development of advanced technologies in the field of “pain management”: a recognition confirmed in 2003 with the entry of the El.En Group. (Star segment of the Italian Stock Exchange – ELN.MI), one of the most important realities in the laser world, both for industrial and medical applications.We have always thought that research is not only confirmation, but also the necessary premise for our work. Born from the synergy between ASAlaser and the Department of Experimental and Clinical Biomedical Sciences of the University of Florence , the ASAcampus laboratory allows us to test the validity of our work and improve results over time. The result of the research is disseminated through conferences, supported thanks to important partnerships and disseminated through numerous scientific publications.Our medical devices for MLS ® Laser Therapy , Hilterapia ® and Magnetotherapy are built according to contents that we consider indispensable: advanced technologies and software, efficacy and safety, ergonomics and design. They allow for ever more targeted and personalized treatment methods. The effectiveness of our therapies is continuously tested thanks to the research carried out in ASAcampus whose results are constantly transferred to clinical applications.
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
You're viewing: AGILENT 6460C TRIPLE QUAD LCMS WITH 1260 HPLC $48,500.00
Add to cart
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
Shopping cart close