| Content | Syneron-Candela Vbeam Prima cosmetic laser
Our new VBeam Prima is particularly recommended for broken capillaries, rejuvenating skin with sun damage or photo ageing, rosacea, red scars and port wine stains.The Vbeam Prima is a highly efficient pulsed dye laser with dual wavelengths, dual cooling systems, giving a better and faster treatment experience overall. It has a number of indications for both face and body, including benign vascular and pigmented lesions, facial telangiectasia, and rosacea, and is a treatment with high patient tolerability and a low incidence of side effects.Rosacea is a common skin condition that is historically difficult to treat and can lead to redness, flushing and broken blood vessels, often in the central face. However, the VBeam Prima, with its 595 and 1064nm wavelengths, offers a complete treatment even for persistent rosacea with larger vessels affected.VBeam Prima Technology
Pulsed Dye Lasers deliver an intense but gentle burst of light into selectively targeted areas of the skin. The light is absorbed by specific blood vessels or melanin pigmented areas in the dermis. With its efficient cooling system and re-engineered hand piece, the VBeam Prima is the next generation pulse dyed laser.   Pictured above: Figures 1A, 2A & 4A – baseline before photos. Figues 1B, 2B & 4B were taken at the 2 month follow up post 4 treatments.What to expect
It is recommended to avoid sun exposure before and throughout treatment to maximize results. A sunblock of SPF 30 or higher should be worn daily during this time.At treatment time, your skin is firstly cleansed to remove any makeup, moisturising lotion and natural oils. The laser’s built-in cooling mechanisms will make the treatment more comfortable so there is no need for local anaesthetic. The epidermis of the skin is protected by the VBeam’s exclusive dynamic cooling method, DCD, which sprays a cooling mist onto the targeted area of skin before each laser pulse, maximising comfort and protecting the skin during treatment. As the laser pulses energy into the skin, you may feel a temporary warm or stinging sensation, which is very tolerable.There may be some redness or mild swelling in the treated area immediately following treatment, and this usually goes away in a few hours. Occasionally some minor bruising may occur, but this is transient and usually disappears in three to five days.Beneficial results are usually noted straight away, and often patients comment they feel a firming or tightening of the treated area. How long the results last will depend on many factors, including the condition being treated and the patient’s lifestyle. For example, if you have sunspots removed, and you continue to spend time in the sun without adequate skin protection, it is likely that the sunspots will return.Indications Syneron-Candela Vbeam Prima cosmetic laser
The VBeam Prima offers a platform capable of treating a wide range of indications, including:- acne scarring
- benign vascular lesions
- benign pigmented lesions
- benign cutaneous lesions
- inflammatory acne vulgaris
- facial telangiectasia
- deep blue veins
- venous lakes
- wrinkles
- rosacea
- photo ageing
| DOUBLO GOLD HIFU SYSTEMWhy choose Doublo HIFU System?
HIFU (High-Intensity Focused Ultrasound System) is a highly precise medical procedure using high-intensity focused ultrasound to heat and destroy the pathogenic tissue rapidly. The earliest widespread use of HIFU was as a treatment for prostate cancer.HIFU hybrid system for Face & Body
Doublo Gold is the ultimate HIFU system for precise Face Lifting & Body Contouring. Offering the fastest treatment by Two-way round shooting and Auto Shot mode.Non Invasive – No Pain – No Bleeding – No Downtime
Faster shot speed : Efficacy improved by repetitious shooting with 300 shots in 8 minutes. Entertain more patients with a faster treatment procedure.Multiple treatment areas
By treating the upper dermis with wound healing effect, facial pores and skin tone is improved as the fibroblast is rebuilt and collagen is boosted.Dermal tissue elasticity and collagen increase as fibroblast is rebuilt by wound healing effect from damaging sub-cutaneous tissue and derma layer with thermal coagulation.
Skin tightening to reduce wrinkle and increase lifting effect is done by creating thermal coagulation at subcutaneous fat and SMASDOUBLO GOLD HIFU SYSTEM Highly Precise, Non-Surgical, Medical Procedure System for Professionals. Doublo HIFU’s Speed is Innovative Performance! Treatment time is dramatically reduced with Hironic’s High-capacity Technology and with Doublo HIFU System you can treat twice the amount of patients than beforeDOUBLO GOLD HIFU SYSTEM Accessories: Power cord for cart
Clear plastic tray insert
Large washer and small lock/spring washer
2x black attachements
2x treatment parameters guide
Simple user manual
Full user manual + CDHighly Precise, Non-Surgical, Medical Procedure System for Professionals. Doublo HIFU’s Speed is Innovative Performance! Treatment time is dramatically reduced with Hironic’s High-capacity Technology and with Doublo HIFU System you can treat twice the amount of patients than beforeNew Standard of
MFU System
1.No. 1 MFU proven by the patents2.MFU proven by cumulative sales and clinical cases3.Fastest treatment by Two-way round shooting and Auto Shot mode | CUTERA SECRET RF 2.0CUTERA SECRET RF 2.0 MICRONEEDLING RADIO is a fractional micro-needling system (fractional radiofrequency) that exceeds the capabilities and limitations of fractional laser significantly. It is a system for extensive skin structure improvement and treatment of hyperhidrosis (radio frequency thermotherapy RFTT), based on both monopolar and fractionated on, bipolar radio frequency. An exact adjustment of the depth of the microneedles and the cold passing the epidermis allow the energy output directly into the target layer.
The needle depth is 0.5 mm to 3.5 mm can be varied, thereby opening up a wide range of treatments. The adjustable intensity of the RF energy allows for the treatment of various areas of the body with different energy performance.The ability to work specifically in the deep dermis, without damaging the epidermis, is regulated in the RF Secret by the delay time of fractional radiofrequency. The needles are inserted at a rate of milliseconds equal to a stamping process in the skin and also withdrawn immediately. Only after the needles are penetrated into the desired skin layer, is carried out for a few milliseconds, a radio frequency pulse to set heat damage. While the penetration into the skin, the needles remain always cold. In order to achieve a deep and superficial effect, the needle depths can be varied individually in the respective treatment passes.Dermal Remodeling from the Inside Out
Demand for non-surgical aesthetic procedures with little to no downtime is on the rise. More than 70% of patients are bothered by signs of aging such as fine lines and wrinkles as well as skin texture and discoloration.1Secret RF is a novel fractional radio frequency (RF) micro-needling system for tissue coagulation and hemostasis designed to stimulate and remodel collagen and address the common signs of aging. It is ideally suited for use on patients who wish to revitalize and refresh the appearance of their skin on all skin types. By adjusting the micro-needles, Secret RF can deliver energy at various depths, so that treatments can be tailored to address each patients individual concerns such as fine lines, wrinkles, acne scars, photoaging and striae at the depth required.Secret RF System
Secret RFs unique technology and customized delivery of energy enables providers to tailor treatments for a variety of skin concerns on all skin types.Customized Dermal Remodeling
Secret RF induces dermal remodeling by applying precisely controlled RF energy directly into various depths of skin from 0.5-3.5 mm – with minimally invasive micro-needles to spare the epidermis and reduce patient downtime.Skin Revitalization and Resurfacing Secret RF is a radio frequency (RF) fractional microneedling system that helps you deliver tailored energy to improve fine lines, wrinkles, and scars from the inside out. Secret RF in action
Applications include fine lines and wrinkles, photoaging, scarring, acne scars, striaeSecret RF technology Handpieces
Two sizes of treatment tips – 25 and 64 pin – give you customizable options for treating the face and body with precision and efficiency. | DENTSPLY SIRONA CEREC PRIMEMILLSpeedEngineered for speed and precision, the new CEREC Primemill inherits the proven strength of its predecessor and raises its powerful performance to entirely new heights.You can now mill zirconia restorations in Super Fast milling mode in around 5 minutes, cutting processing times by more than half. The improved grinding mode for high quality glass ceramics also grinds the material faster than ever before. The result? Satisfied patients and high productivity.QualityDENTSPLY SIRONA CEREC PRIMEMILL A combination of new electronics, software, motors and mechanical components contributes to finer resolution and enhanced dynamics. This results in outstanding restoration margins and surface details – for extremely precise results.The new highly accurate 0.5 mm milling tool reliably delivers first class clinical results. Switch to Extra Fine milling mode for a higher level of detail with occlusal fissures and interdental areas on bridges.VersatilityDENTSPLY SIRONA CEREC PRIMEMILL Welcome to a world where you‘re spoiled for choice! The new CEREC Primemill combines wet and dry milling and wet grinding. No matter the indication, with CEREC Primemill you can select from a broad range of material options from validated partners providing the flexibility and predictability you need to offer patients the best possible treatment.Choose from the full spectrum of machining options, including dry and wet milled zirconia, or wet grinding of glass and hybrid ceramics.ConvenienceDENTSPLY SIRONA CEREC PRIMEMILL The new 7” touch interface with user guidance guides operators step-by-step through the workflow, key maintenance procedures and other routine tasks, so you can delegate milling with complete peace-of-mind. The integrated block scanner is a time-saving new feature that automatically scans material blocks with compatible data matrix codes and records the information, including type, size, color and zirconia enlargement factor. All CEREC Primemill tools are fitted with a color-coded RFID chip that is read by the RFID tool reader, feeding into the tool status display, alerting the user if a tool needs replacing. This ensures all tools are performing at optimal levels. A LED light strip indicates unit status and milling and grinding progress.The all-new CERECThe latest generation of our CEREC system sets new standards so you can offer your patients an unmatched combination of single-visit dentistry and excellent quality.A unique solutionThe CEREC system comprises world-class components that interact perfectly ensuring seamless workflows. With CEREC Primescan, CEREC Software 5 and CEREC Primemill, digital chairside dentistry is faster, easier and more reliable than ever before.Outstanding resultsAfter 35 years of continuous optimization, CEREC gives you the options you need to treat multiple indications with the confidence that comes from outstanding results.
Designed to stand out – and fit inThe new CEREC Primemill does not just communicate seamlessly with other CEREC devices, but its sleek design is also the perfect match – and the ideal look for a progressive dental practice. | Active Optical Systems Optima 518 IPL LaserHandpiece (Standard):Multipurpose Wavelength Mark-II
Handpiece (Optional):Facial Treatments
Pulse Interval/Repetition Rate:0.5 – 2 Seconds
Maximum Output Treatment Pattern:22 Joule /cm 2
Output Power:11-31 Joule / cm 2 , up to 4000 W
Cooling System:Improved Air Cooling
Control:Advanced Software Interface
Lamp’s Life Span:200,000 Flashes (minimum)
Treatment Area/Spot Size:15 x 50 mm, (7.5 cm 2)
Wavelength:420 – 1,100 nm
Weight:88.18 lbs (40Kg) (including stand)
Dimensions:17.32 inches x 17.72 inches x 39.37 inches (44cm x 45cm x 100cm)
Mains:220-230 VAC, 50/60 Hz; 100-120 VAC, 50/60 Hz
Max Mains Power:600 VA
Treatments Variety:
Skin Rejuvenation
Pigmentation Treatment
Acne Treatment
Hair Removal
Hair Removal – Deep Follicles
Hair Removal – Sensitive Skin
Vascular (Facial) Treatment
Tattoo Removal
The Laser uses 12 preset programs. The programs are set in a consecutive, energy intensity increasing order, as specified by the tables of settings, covering all types of hair and skin combinations to be treated.
12 Programs
1 – Very Dark Skin, Fitzpatrick Skin Type IV
2 – Dark Skin, Fitzpatrick Skin Type IV
3 – Dark Skin, Fitzpatrick Skin Type III
4 – Dark Skin, Fitzpatrick Skin Type III
5 – Medium Skin, Fitzpatrick Skin Type II
6 – Medium Skin, Fitzpatrick Skin Type II
7 – Light Skin, Fitzpatrick Skin Type II
8 – Light Skin, Fitzpatrick Skin Type I
9 – Very Light Skin, Fitzpatrick Skin Type I
10 – Very Light Skin, Fitzpatrick Skin Type I
11 – Very Light Skin, Fitzpatrick Skin Type I
12 – High Power, Fitzpatrick Skin Type IOptima-518-Classic Active Optical Systems Optima 518 IPL LaserThe Optima – 518 Classic was designed to answer the needs of sophisticated practitioners who want to provide state of the art treatment to their patients on one hand, based on proven and tested treatment protocols and on the other hand to have the ability to reach new and improved protocols by conducting innovative clinical investigations.The Optima – 518 Classic, based on active’s GEM-PL technology, sets the pulse pattern according to the selected treatment type, skin color, skin photosensitivity and treatment depth. The treatment protocols and different pulse patterns take into account the tissue’s TRT (Thermal Relaxation Time) and the combined knowledge accumulated from thousands of treatments done during the years and clinical investigations done to confirm the findings.New Handpiece Design The Optima – 518 Classic is the first model to use the new Mark II which enables a multipurpose handpiece:
* Faster treatments – up to 0.5 Seconds Between pulses.
* Real-time handpiece temperature control.
* Contemporary and stylish design.
* Light weight design – 25% less weight to improve the therapists’ comfort.Research program for clinical investigations, the self setting program allows researchers to set the treatment’s parameters according to their needs. Allowing advanced research with the device. The energy levels in the self setting program can reach 31J cm 2 with high intensity of 4000 W.Approvals
* CE MDD Intl. Medical Standard
* FDA U.S. Safety Standard
* ISO-13485 Med. Production STD
* IEC 60-601-1 Medical Safety STD
* CFS Gov. Health Approval
* CSA Can. & U.S. Safety App
* TGA Australian health STD. | Fotona SP Spectro Laser System
Fotona’s new SP Spectro laser generator is the laser a multi-application laser for every budget. The powerful and easy to use Fotona SP Spectro draws together two of the gold standard lasers for the cosmetic and aesthetic market high performance Er:YAG and Nd:YAG in one unique and affordable package. The Fotona XP Spectro is the laser system of choice to provide multi applications without the capital cost of multiple laser systems.Features:- Highest Performance
- Gold standard Er:YAG laser and ND:YAG lasers
- Complete package Anti-Aging treatments
- Massive potential with multiple applications
- Full field and fractional scanning
- New Novel Turbo technology
- New V-smooth technology
- User friendly
- Great return on investment
An Affordable multi-application platformThe Fotona SP Spectro offers you the client with the most dependable, affordable up to date most complete package for aesthetical and surgical treatments. It has exceptional functionality and performance despite its relatively low price tag. The Fotona SP Spectro has enhanced treatments attributes coupled with fully customizable settings offering 3rd generation Er:YAG skin resurfacing. The Fotona SP Spectro can be customised and used on any skin type for both full field and fractional resurfacing by absolute control over ablation and coagulation. The Fotona SP Spectro comes complete with state-of-the-art scanners and fractional options which make the system fully loaded and a comprehensives solution to any laser practice whether new or old. Fotona’s unique TURBO technology offers high-definition fractional treatments and Fotona’s V-smooth technology offers a high-speed, minimally –ablative coagulation which further adds to the Spectro’s treatment dimensions. Using the Spectro wide functionality makes you the practitioner an artiste to be able to mix and match cold ablation and thermal effects to achieve the very best of results.The ideal tool for Non-ablative treatmentsThe mainstay for many aesthetic and cosmetic practices is still non-ablative treatments and for this the ND:YAG application of the Fotona SP Spectro is invaluable and needs no introduction as the gold standard treatment. The new SP Spectro also features as standard the innovative and acclaimed S-11, 42cm2 area scanner and support top-hat distribution hand pieces for impressive results in laser hair removal, acne, vascular treatments and of course skin rejuvenation. Also as standard for the more challenging skin types and structures is Fotona’s own FRAC3 modality. This is a fractional approach that supplies non-ablative effects in the skin with minimal damage to the surrounding skin and tissue which results in superior treatments and quicker recovery time.Anti-aging platformThe Fotona SP Spectro also has option for QCW Nd:YAG which will allow you to combine both ablative and non-ablative techniques with lucrative surgical treatments to maximise the return on your investment. The minimally invasive treatments such as laser assisted lipolysis, laser assisted hyperhidrosis and endovenous laser ablation can become a valuable part of your treatment portfolio with this unique laser system and in essence offer a complete anti-aging make over, from the inside out.Er:YAG and Nd:YAG; what a combination!Er:YAG energy is highly absorbed in water which is the main target chromophore for skin rejuvenation and leads to micro-level precision for skin vaporization making the SP Spectro very efficient with little thermal conduction. The results of this advanced performance is side effects are kept to a minimum with little hyperpigmentation or erythema and a fast recovery time. Variable square pulse technology can be maximised with the SP Spectro as it can be accurately tuned to vary the ratio of cold ablation and non-ablative thermal effects to best suit the needs of the patient.The ND:YAG complements the Er:YAG lasers ablative action with the ability to penetrate deeper into the skin without risking damage to the skin surface. The homogenous absorption in skin allows the functionality to be used on all skin types. . The SP Spectro’s Nd:YAG variable square pulse technology causes an increase in the target areas temperature whilst having little or no effect on the surrounding tissue.Maximising potential- The Fotona SP Spectro has inbuilt systems in place to make it one of the best value for money laser systems currently on offer with:
- VSP technology – A square pulse eliminating needless energy to the skin
- EFC – Energy feedback control – Checking and controlling each pulse of laser energy, ensuring the output is exactly matched for a safe and effective treatment avoiding uncontrolled energy fluctuations
- Turbo Technology – A rapid sequence of identical pulses at the same spot, enhancing ablation depth whilst creating more sharply defined, high definition micro channels maximising the effects of even the most conservative Er:YAG treatment settings
- V Smooth Technology – High coagulation, minimally ablation technology. A computer controlled setting that irradiates individual spots for an optimum time before retreating at optimum interval levels
- F Runner ER:YAG Scanner – A computer controlled scanner that delivers sharp fractional treatments with absolute precision and accuracy
- S-11 Scanner – a 42cm2 scan area with an integrated cooling attachment to ensure large area treatments with maximum patient and practitioner comfort
- S Runner Er:YAg Scanner – 4mm spot size and 16cm2 area of treatment for full field resurfacing with adjustable scan areas and patterns
- Tissue Effect indicator – This shows the balance between ablative and coagulation allowing you to estimate the nature of the treatment and predict the outcome of the treatment.
Key Treatments - Verrucae treatments
- Laser Hair removal
- Rosacea treatments
- Fine wines and Wrinkles
- Laser peels
- Acne treatments
- Skin Rejuvenation
- Scar revision
- Laser assisted lipolysis
- Laser assisted Hyperhidrosis
- Onychomycosis
- Fractional treatments
- Skin tightening
- EVL
- Vascular legions
- Thread veins
- FRAC3
- Pigmentation
Technical Data Fotona SP Spectro Laser System| Er:YAG laser |
|---|
| Laser wavelength: | 2940 nm | | Max. pulse energy: | 3000 mJ | | Max. average power: | 20 W | | Pulsewidth: | MSP Mode: 100 microseconds | | SP Mode: 300 microseconds | | LP Mode: 600 microseconds | | VLP Mode: 1000 microseconds | | XLP Mode: 1500 microseconds | | SMOOTH mode: 250 miliseconds (with equally-spaced SP pulses) | | V-SMOOTH mode with S-Runner Scanner: 100-500 ms | | Max. frequency: | 50 Hz | | Manual spotsizes: | 0.45 to 12 mm | | Scanner spotsize: | F-Runner: 250 μm, S-Runner: 4 mm | | Max. scanner area: | F-Runner: 168 mm², S-Runner: 1600 mm² | | Scanner coverage: | F-Runner: 5% – 20% | | Scanner overlap: | S-Runner: 0% – 30% | | Scanning sequences: | F-Runner: OPtimal, NAtural | | S-Runner: SEquential, OPtimal, PaRtial | | Beam delivery type: | FeatherLight arm |
| Nd:YAG laser |
|---|
| Laser wavelength: | 1064 nm | | Max. average power: | 35 W | | Pulsewidth range: | PULSE: 0.1 to 50 ms, QCW: 0.1 to 2 ms | | Max. frequency: | PULSE: 75 Hz, QCW*: 100 Hz | | Manual spotsizes: | 2 to 10 mm | | Scanner spotsizes: | 3 mm*, 6 mm, 9 mm* | | Scanner area: | 42 cm² | | Beam delivery type: | Optical fiber |
|
Reviews
There are no reviews yet.