| Description | The Programat S1 is a light-weight and compact sintering furnace for the sintering of frameworks made of IPS e.max ZirCAD and other ZrO2 materials. New with software-version V2.0: “75 minutes is all it takes”!
With the Programat S1, long sintering processes are a thing of the past. It sinters single-tooth frameworks of zirconium oxide material in 75 minutes and zirconium bridge frameworks up to four units in 90 minutes. Conventional sinter furnaces usually take five to eight hours for this process. What does a short sintering process mean for the laboratory? Crowns and bridges with a zirconium oxide framework can be fabricated in one work day (including veneer). The short sintering process does not jeopardize the high material strength and accuracy of fit of the restoration, as scientific investigations have shown. Furthermore, less power is used.
Advantages | The ultimate in ease, material flexibility and unattended production, the DWX-52DC dental milling machine is designed to greatly expand your lab production and profit. Featuring a 6-slot Automatic Disc Changer, 15-station Automatic Tool Changer and other automated features, it gives users of all skill levels an exceptionally powerful, efficient and affordable dental restoration solution. | At only 4.2 pounds, the portable x-ray, is considered to be the lightest x-ray generator on the market. Many design features are included with an LCD Display, and High Frequency Tube, a perfect balance of technology and simplicity. There is no doubt that the EXARO is the best, handheld and portable x-ray, available. | 3 Shape D2000 Dental lab Scanner Optimized processing speed: creates faster performance and better scanning workflows for several indications Shortens waiting time between creating orders and starting the scan, and enables technicians to begin next scan without having to wait for post processing. | iRay D3 is one of the most popular products in the world and has been leading the technology since 2004. There are several companies following our concept and make it look similar and sell it cheaper. iRay D3 (DX3000)’s core detail technology and safety features cannot be copied. | Since the introduction of conventional X-ray film development in dental medicine, Durr Dental has been leading the way in diagnostics for dental surgeries. Digital X-ray with Durr Dental offers dentists images with high resolution to meet all diagnostic demands. More than 40 years experience in the development of X-ray technology leads time and again to practice-oriented and innovative solutions. The VistaScan Mini image plate scanner makes image plate diagnostics even faster for dentists. |
| Content | Ivoclar Vivadent Programat S1
Single-tooth frameworks can be sintered in 75 minutes and bridge frameworks in 90 minutes
Speed programs for full anatomic restorations with higher translucency
Simple and language-independent operation thanks to the proven combination of membrane-sealed keypad and graphic display
Power Saving Technology: Compared with conventional sintering furnaces, up to 64% of the energy is saved with one sintering process
Compact design based on the Programat platform
Only 28 kg
Calibration possibility
OSD operating status display
Comfortable loading of the sintering chamber thanks to the furnace head tilting upwards
Removable furnace head for maintenance purposes
USB connection – easy software updates
Remote control via PC/laptop by means of PrograBase2 softwareIvoclar Vivadent Programat S1The Programat S1 is a light-weight and compact sintering furnace for the sintering of frameworks made of IPS e.max ZirCAD and other ZrO2 materials. New with software-version V2.0: “75 minutes is all it takes”!
With the Programat S1, long sintering processes are a thing of the past. It sinters single-tooth frameworks of zirconium oxide material in 75 minutes and zirconium bridge frameworks up to four units in 90 minutes. Conventional sinter furnaces usually take five to eight hours for this process. What does a short sintering process mean for the laboratory? Crowns and bridges with a zirconium oxide framework can be fabricated in one work day (including veneer). The short sintering process does not jeopardize the high material strength and accuracy of fit of the restoration, as scientific investigations have shown. Furthermore, less power is used.
AdvantagesExceptional efficiency
For the laboratory, a short sintering process means that a higher level of efficiency can be achieved. Crowns and bridges with a zirconium oxide framework (including a veneer) can be fabricated within one working day. The short sintering process does not jeopardize the high material strength and accuracy of fit of the restoration, as scientific research has proven. Moreover, a lower power consumption is needed.Programat Dosto-Tray:
With the Programat Dosto Tray, the sintering capacity can be increased by up to 40% compared with the standard sinter tray. In this way, the sinter furnace is even more efficient in the dental laboratory. | Roland DWX-52DC Dental Milling UnitDWX-52DC
| 5-Axis (Control XYZAB simultaneously) | Milling method：Dry mill | Cuttable material：Zirconia, Wax, PMMA, Composite resin, PEEK, Gypsum | | DWX-52DC | | Cuttable material | Zirconia, Wax, PMMA, Composite resin, PEEK, Gypsum, Fiber reinforced resin, CoCr sinter metal | | Loadable workpiece shape | Step section: | 98.5 mm (diameter), height 10 mm | | Body section: | 95 mm (diameter), height max. 35 mm
Pin diameter: 6 mm | | Pin diameter: | 6 mm | | Loadable workpiece weight | Up to 850 g | | Number of adapters housed | 6 | | Operating speed | XYZ axis: | 0.24 to 70.9 in./min.(6 to 1,800 mm/min.) | | Spindle motor | Brushless DC Motor | | Spindle speed | 6,000 to 30,000 rpm | | Rotary axis travel angle | A: | ±360° | | B: | ±30° | | Number of burs housed | 15 | | Attachable bur | Shank diameter: | 4 mm | | Length: | 40 to 55 mm | | Compatible compressed air | 0.2 MPa | | Interface | USB | | Control command set | RML-1, NC code | | Power requirements | AC 100 V to 240 V ±10%, 50/60 Hz, 2.0 A
(overvoltage category II, IEC60664-1) | | Power consumption | Approx. 200 W | | Operating noise | During operation: | 70 dB (A) or less (when not cutting), | | During standby: | 45 dB (A) or less | | External dimensions | Width x Depth x Height: | 34.6 x 26.0 x 23.6 in. (880 x 660 x 600 mm) | | Weight: | 105 kg (231.5 lbs.) |
The ultimate in ease, material flexibility and unattended production, the DWX-52DC dental milling machine is designed to greatly expand your lab production and profit. Featuring a 6-slot Automatic Disc Changer, 15-station Automatic Tool Changer and other automated features, it gives users of all skill levels an exceptionally powerful, efficient and affordable dental restoration solution. | Xray2go Hand Held Dental Portable X-Ray System| FDA Registered. Welcome to the new way of taking X-rays in Dental Offices: x-ray2go is the way to go! x-ray2go is a portable hand held camera that uses a high frequency inverter to generate a stable X-ray output with DC high voltage. This effective DC unit enables patient and operator to be exposed to the least amount of radiation. The integrated compact “Camera like” generator increases the user’s confidence and decrease the negative perception patients have about X-rays. It is small: 5.6″ (W) x 3.3″ (D) x 1.2″ (H). Best of all it only weighs 4.18 Lbs (1.9 Kgs), the lightest on the market.• Portability – room to room ease
• No installation necessary versus complex, expensive and time consuming on-wall installation.
• No need for pass troughs
• Large LCD display – easy to read
• Simple touch controls
• Adjustable exposure time
• Hundreds of images from one (1) battery charge
• High resolution diagnostic images
• No blur from hand movement high-frequency generator produces clear images while reducing
patient dose
• Shield protects the operator from scattered radiation – small dose of radiation emitted
• Leading technology provides the highest level of safety, quality and patient care
• Perfect for special needs patients, home health care patients, nursing home patients, children and
veterinary practices
• Perfect for small operatories
• Perfect for mobile dentistry where room is a big factor |
| | | | |
| | | | Specifications Xray2go Hand Held Dental Portable X-Ray System- Portable, cordless x-ray device
· FDA Registered – K082875
· Safe to use-leakage and scatter radiation are less than conventional wall mounted units
· Small & lightweight (4.2 lbs)
· Camera-like ergonomic design
· 100’s of images on single charge!
· Compatible with both digital & film use
· Simple operation
· Highest image quality
· Wide exposure range
· Lowest patient exposure
· Compact outside—smart inside
· Great staff acceptance
· Convenient for children and “x-ray phobic” patients
· Helps eliminate patient fear and reduces x-ray rejection
| X-ray installation | Tube voltage: 60KV
Tube current: 2mA
Heat Capacity: 8.5KHU | | X-ray Generator | Type: High Frequency Inverter
Power Output: 100W
X-ray Tube | | X-ray Tube | Anode Type: Stationary
Anode Angle: 20°
Focal Spot: 0.8mm | | X-ray Control | Exposure time set 0.01 ~ 1.6sec (0.01 sec step) | | Power Requirement | 25.2VDC | | Weight | 4.2 lbs. | | Dimensions | 6.7”(W) x 6.1”(D) x 5.25”(H) |
|
|
| 3SHAPE D2000 DENTAL LAB 3D SCANNER
– Impression scanning:
Multi line scanning in the D2000 and D1000 improves coverage and performance for accurate scanning of impressions to enable restorative design without the need to pour gypsum models.
All in One scanning of triple tray impressions Special mount enables triple-tray scanning capture of upper, lower and bite in one scan.– Improved workflows for single tray impressions:
Provides support for single tray impression scanning including bite alignment.The software upgrades are available for all relevant 3Shape lab scanner models. Current lab scanner owners will receive the upgrades as a LABcare software update, where applicable.Impression scanning the future is now:
The D2000 and the smaller D1000 lab scanner feature multi-line technology. Multi-line technology utilizes multiple scan lines in a single shot to significantly improve cavity and impression capture.This enables the D2000 to accurately scan analog impressions sent to the lab by a dentist. This in turn, eliminates the need for labs having to pour or create a gypsum model from the impression. This saves several steps in the workflow and allows labs to print instead, cost effective 3D models derived from the analog impression if they need a physical working model.While all 3shape scanners support impression scanning only the D2000 and D1000 feature multi line technology.“Impression scanning is today’s reality and the future. No waiting for models to set, no plaster inaccuracies and we reduce costs. Every lab should invest in this technology,” Carlo Backes, Excent Tandtechniek BV, Holland.About the D2000 dental lab scanner:
Introduced at the 2015 Midwinter show, the D2000 was named a top 10 coolest product at the event. The D2000 captivated the industry by having room for two models in its interior, enabling technicians to scan two models at once and perform a complete case like a three-unit bridge in just one scan.D2000 All in-one scanning for max volume throughputs
– 4 x 5 MP cameras, Blue LED Multi-line
– Accuracy: 5 µm (ISO 12836) / 8 µm (Implant bar)
– Die scan time: 15 sec
– Full arch scan time: 20 sec
– Color texture scanning
– No need for separate die scan
– All in One scanning: room for 2 models
– Impression scanningIncludes:3SHAPE D2000 DENTAL LAB 3D SCANNER
– Remainder of a 5 year factory warranty
– 3 Shape Dental Designer w/Additional Seat
– 3 Shape Model Builder
– 3 Shape Occlusion Set Up Tool
– ScanIt Impression Module
– Impression Fixture
– Anatomical CAD Library
– Calibration Kit
– HP Envy Phoenix Desktop PC | Dexcowin IRay D3 Dental Handheld X-Ray System
iRay D3 Dental Mobile Handheld X-Ray
Dexcowin invented the iRay D3 more than 10 years ago, in 2004, after several years of R&D. The iRay D3 has some different names for the OEM, but the official product model name is DX3000. We have designed it as a pure handheld portable X-ray. It has many different features for mobile, battery powered, handheld, cordless, digital, and camera types. It is lightweight, durable, stable, easy to use, saleable, and compatible to all radiation detectors, with clear, effective images. However, what we would like to emphasize, and what we are so proud of about the iRay D3 is that it is safe for handheld use. This is because we are concerned about the safety and care of the operators and patients. This is our top priority and responsibility to our customers. We follow all required rules from FDA, GMP, CE and all local health departments from the over 40 countries and states we have registered in. We keep to the safety regulations during manufacturing. Our long term company strategy for iRay D3 is to “Make it safe,” “”Make it better than yesterday,” and “Make it durable.”A summary of iRay D3 features Dexcowin IRay D3 Dental Handheld X-Ray SystemiRay D3 Convenience & Cost effectiveness
You can stay with the patient, and it is especially beneficial for children.
No need to construct separate shielded rooms, so all operation rooms can be X-ray rooms.
Lightweight 4 lbs gives you handy operation and saves time for full mouth X-ray.
More than 200 shots on single charge (1.5 hour). Battery and a spare battery included.iRay D3 compatibility
Applicable and be compatible with all detectors, film, PSP and all kinds of sensors.IRay D3 Mobility
Completely mobile system with a battery and extras.
Compact design and lightweight allows it to be moved anywhere in and out of office.IRay D3 Safety
Designed for handheld, so it does not affect the operator with extremely low leakage radiation.
Rechargeable Lithium polymer battery is very safe and stable with a safety circuit
Battery can be charged separately with a main X-ray body.Other accessories
AllMyT mobile cart for iRay D3 to be mounted on.
A neck strap to balance the weight and preventing dropping. | DUERR VISTA SCAN MINI EASY COMPACT & EASYDurr Dental VistaScan Mini Easy image plate scanner makes image plate diagnostics even faster for dentists. The compact device is particularly easy to use and requires a minimum of space so that it can be installed in the treatment room.The advantage: X-ray and scanning directly at the chairside. The reusable VistaScan image plates are read out in top quality within seconds. There has never been a better time to change over to image plates!Features:DUERR VISTA SCAN MINI EASY COMPACT & EASY- Top image quality
- For common image plates sizes (size 0 and size 2)
- Easy integration via DBSWin imaging software or your own third party software
- Ideal chairside appliance
- Interface with PC via USB or network
A new standard for image plate scanners
The new compact VistaScan Mini View impresses users with its tried-and-trusted technology and the excellent image quality of the VistaScan family. It also offers numerous functions which noticeably increase comfort, efficiency and safety during everyday work. This gives the surgery team the confidence that they can rely on their equipment.The best possible detection of details – reliable diagnostics
The level of detection of details achieved by the VistaScan image plates is superior to that of both X-ray film and other image plate systems. This provides dentists with a sound basis for making reliable diagnoses. The DBSWIN imaging software provides help in this regard and ensures ergonomic work processes. The VistaScan Mini View can even be used with other common software if necessary.The easy way from the film to the image plate
Dürr Dental image plate technology ensures an extremely easy switch from X-ray film to a digital workflow. Since the X-ray process and image formats do not differ from those for analogue film, there‘s not really anything new to learn. The thin, flexible plate offers clear advantages for both the surgery team and patients: It is easier to position and sits more comfortably in the patient‘s mouth. Once an image has been taken, it appears on the monitor in just a few seconds. The durable image plate is then immediately ready to be used again. |
Reviews
There are no reviews yet.