| Content | Ivoclar Vivadent Programat CS2 Glazing
The second generation of the Programat CS series is the ideal ceramic and crystallization furnace for dentists.The device has been specially developed for the crystallization of IPS e.max CAD restorations. The Programat CS2 is easily operated by means of the new colour touch screen and the proven membrane-sealed keypad. It is furthermore equipped with 20 individual programs as well as predefined Ivoclar Vivadent programs, such as the Speed program, which crystallizes IPS e.max CAD restorations in less than 15 minutes.The QTK2 muffle technology is responsible for even more homogeneous heat distribution in the firing chamber, leading to optimum firing results and a prolonged life cycle of the heating element. Additionally, the new vacuum pump control system with double valve technology ensures noiseless and power-saving operation of the vacuum pump.Advantages:
Colour touch screen and proven membrane-sealed keypad
QTK2 muffle technology with SiC bottom reflector
Easy operation; specially developed for use in the dental practice
Automatic double-range temperature calibration (ATK2)
Remote diagnostics via Internet, e-mail and data log files
Software updates via USB flash drive
Power-saving technology
OSD display
Integrated tong holder
Double valve vacuum technology2015 Ivoclar Vivadent Programat CS2 GlazingSpecifically for the crystallisation of IPS e.max CAD restorations. With colour touch display and membrane keypad. Apart from the already installed Ivoclar Vivadent programs another 20 individual programs are available. Included is among others a speed program that will crystallise IPS e.max CAD restorations in less than 15 minutes.Advantages:
QTK2 heating muffle with SiC bottom reflector for a homogeneous heat distribution and outstanding firing results;
Automatic temperature calibration (ATK2) with two reference points ensures an very precise calibration;
Vacuum pump control with double-valve technology for low-noise and power-saving operation;
Optical status display (OSD) informs about the actual operational status by using different colours;
Energy-saving technology enables up to 40 % power saving in standby mode;
LAN and USB connections;
Remote diagnosis via data file or internet.
Technical data:
32.0 x 46.5 x 32.0 cm without object tray, 39.0 x 46.5 x 32.0 cm with object tray; 200-240 V, 50/60 Hz; power input max. 8,5 A; firing temperature max. 1200 °C; firing chamber ø 90 mm, height 80 mm; 15.6 kg. | Dexcowin IRay D3 Dental Handheld X-Ray System
iRay D3 Dental Mobile Handheld X-Ray
Dexcowin invented the iRay D3 more than 10 years ago, in 2004, after several years of R&D. The iRay D3 has some different names for the OEM, but the official product model name is DX3000. We have designed it as a pure handheld portable X-ray. It has many different features for mobile, battery powered, handheld, cordless, digital, and camera types. It is lightweight, durable, stable, easy to use, saleable, and compatible to all radiation detectors, with clear, effective images. However, what we would like to emphasize, and what we are so proud of about the iRay D3 is that it is safe for handheld use. This is because we are concerned about the safety and care of the operators and patients. This is our top priority and responsibility to our customers. We follow all required rules from FDA, GMP, CE and all local health departments from the over 40 countries and states we have registered in. We keep to the safety regulations during manufacturing. Our long term company strategy for iRay D3 is to “Make it safe,” “”Make it better than yesterday,” and “Make it durable.”A summary of iRay D3 features Dexcowin IRay D3 Dental Handheld X-Ray SystemiRay D3 Convenience & Cost effectiveness
You can stay with the patient, and it is especially beneficial for children.
No need to construct separate shielded rooms, so all operation rooms can be X-ray rooms.
Lightweight 4 lbs gives you handy operation and saves time for full mouth X-ray.
More than 200 shots on single charge (1.5 hour). Battery and a spare battery included.iRay D3 compatibility
Applicable and be compatible with all detectors, film, PSP and all kinds of sensors.IRay D3 Mobility
Completely mobile system with a battery and extras.
Compact design and lightweight allows it to be moved anywhere in and out of office.IRay D3 Safety
Designed for handheld, so it does not affect the operator with extremely low leakage radiation.
Rechargeable Lithium polymer battery is very safe and stable with a safety circuit
Battery can be charged separately with a main X-ray body.Other accessories
AllMyT mobile cart for iRay D3 to be mounted on.
A neck strap to balance the weight and preventing dropping. | 2019 BIOLASE Waterlase Express Dental Laser With Hand PieceRestorative
– Cavity Preparations
– Sub-gingival decay removal
– TroughingSoft-Tissue
– Achieving hemostasis
– Frenectomy techniques
– Biopsies and lesionsPerio
– REPAIR Perio protocol (all steps)
– Closed crown lengthening
– Flap surgeryImplant
– REPAIR Implant protocol (all steps)
– Implant debridement
– Flap surgeryEndo
– Access, cleaning, and shaping
– Pulpotomy, Pulp Cap
– Disinfection of Root Canal
– Removal of Smear LayerSpecifications:
– Wavelength: 2.78 µm (2780 nm)
– Max. Power Output: 4 W Pulse
– Energy: 200 mJ Pulse
– Rep Rate: 5-50 Hz Pulse
– Duration: H: 60 µsec, S: 700 µsec
– Laser Engine: Miniaturized Er,Cr:YSGG laser engine
– Fiber Optic Cable: White, highly flexible, reliable
– User Interface: Applications-based, removable tablet
– Touchscreen Size: 9.7”x 6” (24.64cm x 15.24cm)
– Pre-sets: 95 procedural presets, with simple slider bar to adjust settings within each procedure
– Additional Content: Procedure animations, case studies, best practices
– WiFi-enabled for BIOLASE Connect: Yes
– Weight: 27 Lbs (12.247 kg)The Waterlase express is the all-tissue laser that will change the way you practice dentistry. Waterlase Express has the power to solve dental problems beyond expectation. The versatile and gentle combination of laser energy and water has the power to relieve dental anxiety at the source, for you, your team, and your patients. The countertop all-tissue laser features a miniaturised laser engine that is 50% smaller than the Waterlase iPlus, offering the benefits of all-tissue laser technology in a way that is compact, simple and easy to use.2019 BIOLASE Waterlase Express Dental LaserWaterlase Express is the only laser to feature an in-depth, step-by-step, 4K HD animation for every step of every procedure. No matter your level of expertise, from beginner to advanced user, the Waterlase Express animation library is a dazzling, informative training resource.– 95 clinical presets for soft tissue, hard tissue and bone.
– Step-by-step procedure animations.
– Removable tablet with easy-to-use touchscreen interface.
– Loaded system menu features on-board reference material.
– H MODE – 60 microseconds – a cooler mode for cutting enamel and all other applications.
– S MODE – 700 microseconds – a hotter mode for coagulation.
– Stay up-to-date and connect with fellow users, clinical mentors and online training directly from the unit.
– Customer care access for direct help when needed.
– Sturdy handle for easy transport makes the Waterlase express conveniently portable.
– Wireless footswitch for easy integration.
– Light and flexible SureFire trunk fibre ensures minimal resistance and treatment fatigue.
– Over 2 hours of 4K-Ultra-HD learning content | Dexcowin IRay D4 Dental Handheld X-Ray System
Dexcowin’s iRay D4 is a total dental imaging solution. The iRay D4 comes with an attachable digital sensor, a built in computer for image processing and a 4.8” digital screen so you can see your radiographs live. Diagnosis with a single machine, completely safe and mobile allows imaging on the go. The iRay D4 works with film, digital sensors and PS (photostimulable phosphor) plates. The iRay D4 is wireless, handheld, and completely mobile thus eliminating the need for designated X-ray machine rooms.Dexcowin’s iRay D4 is an all in one solution. It is an x-ray source, a computer, and comes with a high-quality sensor. The iRay D4 can be used as a simple x-ray source when used with film or a sensor attached to a separate computer.The iRay D4 is wireless, handheld, and completely mobile thus eliminating the need for designated X-ray machine rooms. The iRay D4 is perfect for the endodontic who need to surgical procedures in process or mobile dentist practicing in remote locations without computer access.Safety* Safe to hold by hand. 1/7 the radiation exposure then conventional systems.
* Rechargeable Li-poly batteries allow up to 300 images on a single charge.
* Works with any radiographic medium: film, digital sensor, PS plates.
* Operator Safe: Certified as SAFE TO USE BY HANDMobility* The iRay D4 is a complete mobile system. It has an on board computer and a 4.8” screen that allows the doctor to take analyze X-rays with a single piece of equipment.
* There is no need for additional equipment as the iRay D4 comes complete with a high definition sensor.
* The iRay D4 is the most mobile and independent solution on the market today.
* The iRay D4 comes with two rechargeable Li-poly batteries with up to 300 shots on a single charge.
* The iRay D4 also includes wireless transfer to your PC, now take and view your X-rays anywhere!Quality* The iRay D4 gives you more for less than conventional systems. The iRay D4 does not need special construction in terms of shielded rooms, chemical development and dedicating rooms for X-ray.
* The iRay D4 does not require special technical equipment such as computers and additional sensors thereby providing quality all-in-one equipment.
* It allows you to take an x-ray in real time, while you are in the room. This allows the practitioner to provide his customer face to face reassurance while the X-rays and images are taken.Still not convinced? We also offer a 5-jointed stand arm for which you can mount the iRay D systems. Comes fixated to a mobile cart so you still preserve the portable characteristics of the iRay system. With an included remote control, satisfy any operator who still feels uneasiness with being in the same room as an X-ray machine.Digital X-ray Specifications:Dexcowin IRay D4 Dental Handheld X-Ray SystemProduct Name : iRay D4
CPU : 1.6GHz
DISPLAY : 4.8”Touch Panel TFT-LCD (1024×600)
MEMORY : 16GB
EXPOSURE : 0.05 ~ 1.35, 0.01 step
BATTERY : rechargeable 4 cell high capacity battery pack
INTERFACE : USB2.0
Tube Voltage : 60kV(fixed)
Tube Current : 2mA(Fixed)
Focal Spot Size : 0.8mm
Voltage Consumption : 240W Max
Cooling Method : Oil Cooling
Total Filtering : Over 1.5mmAl (inherent filtration : 0.8mmAl, fixed type added filter : 0.7mmAl)
Target Angle : 20°
Time Setting Function : 0.05 ~ 1.35 second (0.01 step)
Main Body Size : 240(L) x 166(W) x 82(H) [mm]
Main Body Weight : 2.4kg
Battery Pack : Cell Material Quality Lithium Polymer
Charging Condition : Charging Current 1A
Temperature Range : 0~40°C
Maximum Current : 18A
Out Voltage : DC 15V
Temperature Range : -20 ~ 60°C | Ivoclar Vivadent Programat EP 3010Programat EP 3010The Programat EP 3010 is characterized by cost effectiveness and high-quality press and firing results. In addition, the Programat EP 3010 is optimally coordinated with Ivoclar Vivadent press ceramic materials such as IPS e.max Press.In comparison to its predecessor model EP 3000, the operation of the Programat EP 3010 has become even simpler due to the new colour touch display, the modern icons, the intuitive menu-based navigation and the proven membrane-sealed keypad.The new QTK2 heating muffle in combination with the SiC bottom reflector ensures homogeneous heat distribution in the firing chamber. As a result, the investment ring is preheated more evenly and reliably. Furthermore, these features enable the user to press difficult-to-press objects, e.g. with very thin marginal areas, and to achieve even higher quality results.The electronic press drive with force sensor ensures the precise control of the press plunger in the micrometre range. The integrated Crack Detection System (CDS) immediately interrupts the press process if a crack in the investment ring occurs. Therefore, restorations are optimally protected. Advantages:- Programs are optimally coordinated with Ivoclar Vivadent materials.
- QTK2 muffle technology with SiC bottom reflector for homogeneous heat distribution.
- Colour touch screen and proven membrane-sealed keypad for easy operation.
- Electronic press drive with force sensor produces high-quality press results. No compressed air connection required.
- Crack Detection System detects cracks in the investment ring.
- Easy and automatic temperature calibration at two reference points (ATK2).
- Simple software update via USB flash drive.
- Remote diagnosis function via data file for optimum support by a service centre.
- Broad range of programs: 300 individual firing and 20 individual press programs.
- Power Saving Technology for power-saving operation.
| Roland DWX-42W Wet Dental Milling Machine
The DWX-42W enables wet milling of popular glass-ceramic composite resins with high precision and accuracy. High-Speed Production with proprietary DGSHAPE spindle. Expanded 6-tool Automatic Tool Changer for uninterrupted milling. LAN capable for network and hardware connection and communication. VPanel user interface for easy monitoring of milling jobs and tools.The DGSHAPE DWX-42W enables wet milling of popular glass ceramic and composite resins with high precision and accuracy.- High speed production with proprietary DGSHAPE spindle
- Expanded 6-tool Automatic Tool Changer for uninterrupted milling
- LAN capable for easy connectivity
- Included VPanel for easy monitoring of milling jobs and tools
DWX-42W Roland DWX-42W Wet Dental Milling Machine| Millable material | Glass ceramics, Composite resin, PMMA | | Loadable workpiece shape | Width | Maximum 40 mm | | Depth | Maximum 20 mm | | Height | Maximum 20 mm | | Operating speed | 0.24 to 70.9 in./min. (6 to 1,800 mm/min.) | | Spindle speed | 15,000 to 60,000 rpm | | Rotary axis travel angle | A axis | ±360° | | Number of burs housed | 6 | | Attachable bur | Shank diameter | 3 mm, dedicated milling bur | | Compatible compressed air | Control Pressure | 0.3 MPA or more | | Air Capacity | 39 L/min or more | | Interface | USB, Ethernet (10 BASE-T/100 BASE-TX automatic switching) | | Control command set | RML-1, NC code | | Power requirements | AC 100 to 240 V ± 10%, 50/60 Hz (overvoltage category II, IEC 60664-1), 2.1 A | | Power consumption | Approximately 190 W | | Operating noise | During operation | 70 dB(A) or less (when not cutting) | | During standby | 48 dB(A) or less | | External dimensions | Width x Depth x Height | 19.0 x 22.0 x 23.6 in. (482 x 560 x 600 mm) | | Weight | 135 lbs. (61 kg) | | Installation environment | Indoor use, Altitude | Up to 6,562 ft. (2,000m) | | Temperature | 41 to 82 °F (5 to 28°C) | | Humidity | 35 to 80%RH (no condensation) | | Ambient pollution degree | 2 (as specified by IEC 60664-1) | | Short-term temporary overvoltage | 1,440 V | | Long-term temporary overvoltage | 490 V | | Included items | Power cord, USB cable, Roland DG Software Package CD, setup guide, drain hoses, dedicated milling burs (4), detection pin, dummy pin, rotary axis correction jig, ATC magazine correction jig and screw, hexagonal screwdriver, hexagonal wrench, measuring cup, mounting screws (4), milling bur removal jig, coolant tank, waste receptacle, filters (2), regulator with stay and screws (2), maintenance kit, daily maintenance card, 6 mm air hose, coolant additive, MillBox CAM software, Ethernet cable |
|
Reviews
There are no reviews yet.