| Description | Advantages:
QTK2 heating muffle with SiC bottom reflector for a homogeneous heat distribution and outstanding firing results;
Automatic temperature calibration (ATK2) with two reference points ensures an very precise calibration;
Vacuum pump control with double-valve technology for low-noise and power-saving operation;
Optical status display (OSD) informs about the actual operational status by using different colours;
Energy-saving technology enables up to 40 % power saving in standby mode;
LAN and USB connections;
Remote diagnosis via data file or internet. | The Identica T300 dramatically improves the fundamental aspects of scanner performance and the latest software technology provides the clearest, sharpest data. Identica T300 is customized to deliver the finest data quality using its dual 2.0 MP cameras. Identica T300 will save valuable time and money by minimizing trial & error when adjusting restoration fits. | SuniRay 2 achieves maximal image quality with superior diagnostic capabilities while maintaining the lowest radiation levels among all digital sensors. The comprehensive and feature-rich Prof. Suni Advanced Imaging Software supplements the SuniRay 2’s high-quality imaging with a wide array of user-friendly customization and image-enhancement tools. With the SuniRay 2, Suni has created a complete digital radiography system that seamlessly integrates with your entire practice. | Because the XIOS Scan imaging plates were developed specifically for the Sirona scanner, they offer particularly high image quality. For better identification and visibility in the mouth, the plates have a white, inactive back and a blue, active side. | The DWX-51D 5-Axis Dental Milling Machine is designed for effortless production of dental prosthetics. Built for precision, error-free milling, you don’t need any machine expertise to operate it. With touch-button controls and automated milling features, the production of high-quality bridges, crowns, inlays, onlays, abutments and other restorations out of 98 mm discs and blocks has been made virtually foolproof. | The DWX-4W goes beyond dry milling and is the epitome of wet grinding technology. It uses 4-axis simultaneous movements to wet grind precision inlays, onlays, crowns, veneers and short-span bridges from glass ceramic and composite resins. |
| Content | Ivoclar Vivadent Programat CS2 Glazing
The second generation of the Programat CS series is the ideal ceramic and crystallization furnace for dentists.The device has been specially developed for the crystallization of IPS e.max CAD restorations. The Programat CS2 is easily operated by means of the new colour touch screen and the proven membrane-sealed keypad. It is furthermore equipped with 20 individual programs as well as predefined Ivoclar Vivadent programs, such as the Speed program, which crystallizes IPS e.max CAD restorations in less than 15 minutes.The QTK2 muffle technology is responsible for even more homogeneous heat distribution in the firing chamber, leading to optimum firing results and a prolonged life cycle of the heating element. Additionally, the new vacuum pump control system with double valve technology ensures noiseless and power-saving operation of the vacuum pump.Advantages:
Colour touch screen and proven membrane-sealed keypad
QTK2 muffle technology with SiC bottom reflector
Easy operation; specially developed for use in the dental practice
Automatic double-range temperature calibration (ATK2)
Remote diagnostics via Internet, e-mail and data log files
Software updates via USB flash drive
Power-saving technology
OSD display
Integrated tong holder
Double valve vacuum technology2015 Ivoclar Vivadent Programat CS2 GlazingSpecifically for the crystallisation of IPS e.max CAD restorations. With colour touch display and membrane keypad. Apart from the already installed Ivoclar Vivadent programs another 20 individual programs are available. Included is among others a speed program that will crystallise IPS e.max CAD restorations in less than 15 minutes.Advantages:
QTK2 heating muffle with SiC bottom reflector for a homogeneous heat distribution and outstanding firing results;
Automatic temperature calibration (ATK2) with two reference points ensures an very precise calibration;
Vacuum pump control with double-valve technology for low-noise and power-saving operation;
Optical status display (OSD) informs about the actual operational status by using different colours;
Energy-saving technology enables up to 40 % power saving in standby mode;
LAN and USB connections;
Remote diagnosis via data file or internet.
Technical data:
32.0 x 46.5 x 32.0 cm without object tray, 39.0 x 46.5 x 32.0 cm with object tray; 200-240 V, 50/60 Hz; power input max. 8,5 A; firing temperature max. 1200 °C; firing chamber ø 90 mm, height 80 mm; 15.6 kg. | Medit Identica T300 Dental 3D Scanner
Identica T300 to meet all of your needs. With powerful scan engine and affordable pricing, the new Identica T300 is a perfect fit for both performance enthusiasts and entry level users. Its evolutionary design and high tech features will help your lab rediscover productivity. Bundled colLab 2017 scan software makes scan data processing easy and efficient.Quality & affordability- 2.0 MP cameras, Blue LED
- Accuracy : 7 μm (ISO)
- Full arch scan time 24 sec
- 2-Axis Manual
Identica T300 dramatically improves the most important aspects of scanner performance. The latest software technology provides you with the cleanest and sharpest data. T300 is specially designed to bring out the finest data quality using its 2.0 MP cameras. T300 will save your precious time and money by minimizing trial & error to adjust restoration fits.Identica T300 is an upgrade version of Identica Blue, provided at lowest pricing. Giving better value for the affordable scanner users. Identica T300 has enhanced data quality compared to Identica Blue.Introducing the Next Generation of 3D Dental Scanners: Our T-Series Medit represents the apex in 3D dental scanning. With unsurpassed speed, accuracy, and reliability, Medit helps you rediscover your productivity. The T-Series’ new powerful scan engine and affordable pricing are the perfect fit for performance enthusiasts and entry-level users, helping your lab rediscovering productivity thanks to its convenient design and high-tech features. Medit T300 is the latest Medit scanner with an enhanced SW scan. It uses Blue Light technology, which enables quick scanning and provides excellent precision (7μm).The program is user-friendly, because it takes you through simple and fast individual steps, from inserting the model into the scanner to exporting the file to the CAD design program. FEATURES:Medit Identica T300 Dental 3D Scanner- Scanned printing: 2 manual axes.
- Touch sensor: no.
- Full arcade scan speed: 24 ´´
- Resolution of the camera: 2 x 2 MP camera.
- Scan volume: 90 x 72 x 60 mm.
- Scanning principle: Optical change phase.
- Dimensions: 290 x 290 x 340 mm.
- Weight: 12Kg.
- Light source: Blue LED.
- Connectivity: Type USB 3.0 B.
- Power: 100- 240 vac, 50-60 HZ.
- Warranty: 2 years.
ADVANCED DATA PROCESSING AND HIGHER RESOLUTION DUAL CAMERAS The Identica T300 dramatically improves the fundamental aspects of scanner performance and the latest software technology provides the clearest, sharpest data. Identica T300 is customized to deliver the finest data quality using its dual 2.0 MP cameras. Identica T300 will save valuable time and money by minimizing trial & error when adjusting restoration fits. | SuniRay 2 Digital Intraoral Sensor Size 1 and Size 2
X-Ray Imaging Properties- Resolution: The pixel resolution of the high resolution (HiRes) sensors exceeds 15 lp/mm. The standard resolution of an X-Ray image, as measured by the modulation transfer function (MTF) exceeds 12 lp/mm. This is measured by using a standard 60 kV intraoral X-ray source.
- Does Efficiency: The sensor will produce a high quality image with an X-Ray dose that is only a fraction of the standard dose required by Dental X-Ray film.
- Diagnostic Efficacy: The system will produce a superior image quality of images obtained when using standard dental X-Ray film. This allows the dentist to diagnose standard intraoral pathologies encountered during screening procedures.
- Wide dynamic range: The sensor pixel well capacity is very high, allowing a higher accommodation of greyscale (bone density) dynamic range.
Sensor Material Biocompatibility SpecificationsThe sensor’s body material and cable material are biocompatible. The sensors and all component materials have been tested to comply with ISO standards, and specifically, the sensor complies with EN IS0-10993 (Biological Evaluation of Medical Devices). | Technical data | Size 1 | Size 2 |
|---|
| Sensor Dimensions (mm) | 39.5 x 26 | 43.5 x 31.5 |
|---|
| Active Area (mm) | 31.1 x 20.2 | 35.2 x 26.2 |
|---|
| Sensor Technology | CMOS APS Fiber Plate | CMOS APS Fiber Plate |
|---|
| Maximum Gray Levels | 4096 | 4096 |
|---|
| Sensor Cable | 3 feet (1m) | 3 feet (1m) |
|---|
| Cable Attachment | Reinforced Strain Relief | Reinforced Strain Relief |
|---|
| USB Module | Integrated USB 2.0 Module | Integrated USB 2.0 Module |
|---|
| Software | Prof. Suni | Prof. Suni |
|---|
X-Ray Imaging Properties SuniRay 2 Digital Intraoral Sensor Size 1 and Size 2- Resolution: The pixel resolution of the high resolution (HiRes) sensors exceeds 15 lp/mm. The standard resolution of an X-Ray image, as measured by the modulation transfer function (MTF) exceeds 12 lp/mm. This is measured by using a standard 60 kV intraoral X-ray source.
- Does Efficiency: The sensor will produce a high quality image with an X-Ray dose that is only a fraction of the standard dose required by Dental X-Ray film.
- Diagnostic Efficacy: The system will produce a superior image quality of images obtained when using standard dental X-Ray film. This allows the dentist to diagnose standard intraoral pathologies encountered during screening procedures.
- Wide dynamic range: The sensor pixel well capacity is very high, allowing a higher accommodation of greyscale (bone density) dynamic range.
| XIOS scan Sirona
XIOS Scan. Small change. Big impact.
The XIOS scan provides a gentle, easy introduction into the world of digital X-ray imaging. If you want to switch from film to digital without having to give up your tried-and-true working methods, imaging plate technology offers you a myriad of possibilities. You can experience many of the advantages of digital imaging without a darkroom and chemicals while your team continues its regular workflow. XIOS Scan completes the family of intraoral X-ray systems from Sirona which includes the sensors XIOS XG and the intraoral X-ray HELIODENTPLUS source.
Tried-and-true workflow meet the advantages of digital imaging
Outstanding scan quality with 22 line pairs/mm
Scratch-free scanning and automatic film detection
Proven Sirona quality “Made in Germany”Technical data
XIOS Scan
Dimensions (H x W x D) 363 mm x 163 mm x 286 mm
Weight 7.3 kg ± 0.5 kg
Pixel size selectable 23/30 μm
Resolution 22/17 Lp/mm
Interface LAN
Dimensions
Storage plate intraoral
Size 0 31 mm x 22 mm
Size 1 24 mm x 40 mm
Size 2 31 mm x 41 mm
Size 3 27 mm x 54 mmSmall Change. Big Impact.Xios Scan provides a gentle, easy introduction into the world of digital X-ray imaging. If you want to switch from film to digital without having to give up your tried-and-true working methods, imaging plate technology offers you a myriad of possibilities. You can experience many of the advantages of digital imaging without a darkroom and chemicals while your team continues its regular workflow.The Xios Scan integrates seamlessly with the Dentsply Sirona X-ray units and software to deliver better, safer and faster intraoral diagnostics.For the best digital image quality and the easiest workflowXios Scan works at an outstanding resolution of up to 22 line pairs/mm (theoretical resolution). The result is exceptionally sharp and detailed images - ideal conditions for an accurate diagnosis. The images are transmitted directly to Sidexis 4, Dentsply Sirona Imaging's software, where they can then be further evaluated and diagnosed. The software provides simple controls for later editing of the visual impression of the X-ray in terms of sharpness, brightness and contrast. | Roland DWX-51D Dental Milling Unit
Roland DWX-51D Integrated HD Mill Package
DWX-51D 5-Axis Dental Mill
High Definition Custom CAM Strategy SUM3D
Nabertherm High Speed Auto Cool Zi Furnace
Quatro IVAC Mill Suction
Integration Package for Implant Abutments
Integration Package for up to 60mm disc sizes
Integration Package for HD High Detail End Mills
Start Up Package for Milling Materials
Top To Bottom Mill Training by the Industry Experts
Equipment Set up, IT and Networking Included
Mill Contingency and Loaner ProgramBuilt-to-Last
For thirty years, Roland DG has been the trusted provider of milling machines that are built to last. The DWX-51D 5-Axis Dental Milling Machine is no exception. After extensive research in which lab technicians were asked what they needed in a production mill, the DWX-51D was developed to enhance user experience, maximize ease-of-use and improve output quality. Built with a simple and modern design, the DWX-51D looks as effortless as it operates.Features
5-axis simultaneous operation for non-stop precision milling
Sturdy and efficient ball screw-driven system
New C-clamp for easy adjustment and alignment
10-station Automatic Tool Changer (ATC) for continuous milling
Powerful vacuum and anti-static ionizer for clean calibration and dust reductionThe DWX-51D is designed for effortless, precision production of dental prosthetics fromcopings, crowns and bridges to inlays, onlays and abutments, etc. With a host of automated features and a clean, stable work environment, the DWX-51D is the perfect solution for labs wanting to increase production or those looking to get into digital milling for the first time.Built-for-You.Built-to-Last.For thirty years, Roland DG has been the trusted provider of milling machines that are built to last. The DWX-51D 5-Axis Dental Milling Machine is no exception. After extensive research in which lab technicians were asked what they needed in a production mill, the DWX-51D was developed to enhance user experience, maximize ease-of-use and improve output quality. Built with a simple and modern design, the DWX-51D looks as effortless as it operates. Distinguishing Features Roland DWX-51D Dental Milling Unit- 5-axis simultaneous milling for precision milling
- Steady and efficient ball screw-driven operation
- New C-shape clamp for easy adjustment and alignment
- 10-station Automatic Tool Changer (ATC) for continuous milling
- Powerful vacuum and anti-static ionizer for clean calibration and dust reduction
Ultimate Convenience and Ease-of-Use- A variety of new features ensure continuous, user-friendly milling, including
- Sturdy frame ensures stability, while slim design fits nearly any lab space
- Easy access tool drawer properly stores and protects tools
- Color-coded LED status lights signal current job progress
- Virtual Machine Panel (VPanel) allows users to configure settings from their computer, send CAM data to the DWX-51D for production, and track milling progress
- Easily accessible cutting area for simple tool replacement and cleaning
| Roland DWX-4W Dental Milling Unit
Reliable High PerformanceIn addition to milling on X, Y and Z axes, the DWX-4W rotates pin-type blocks 360 degrees on a fourth axis (A axis) to support undercuts. The ball screw-driven 4-axis control allows for smooth, high-precision machining. The DWX-4W’s high-performance 60,000-RPM Jaeger spindle is known for its reliability and supports precision milling of glass ceramics and composite resin. With its multi-pin clamp, the DWX-4W is a wet dental milling machine that can mill up to three different pin-type materials continuously in one operation. As a result, prosthetics for up to three different patients can be produced in a single production run, saving time, labour and costs.- Simultaneous 4-axis machining
- 4-state Automatic Tool Changer (ATC)
- 60,000 RPM Jaeger DentaDrive Spindle
- CAM software bundled
- Virtual Machine Panel (VPanel)
- Fully-integrated water and coolant filtration system
- Coolant leakage & flow monitoring sensors
- Tool life monitoring
- Mail notification system
Summary Roland DWX-4W Dental Milling Unit• Maximum Convenience
• Virtual Machine Panel
• Progress and Error Alerts for Error-Free Milling
• Coolant Compartment and Water Filtration
• Clean Cutting Area for Precision Milling
• Economical Open Architecture
• CAM Software Included
• Growth Potential
• Peace of MindThe DWX-4W’s high-performance 60 000 RPM Jaeger DentaDrive spindle supports precision milling. It’s equipped to mil pin-type blocks, including glass ceramics and composite resin – acclaimed in the industry for their superior strength and aesthetics. materials can be finished with a short finishing tome, dramatically reducing labour and production time.In addition to milling on X, Y and Z axes, the DWX-4W rotates pin-type blocks 360 degrees on a fourth axis (A axis) to support undercuts, the rigid ball screw-driven 4-axis control allows for smooth, high-precision machining. With its multi-pin clamp, it can mil up to three different pin-type materials continuously, enabling production three different patient prosthetics in a single production run. it also features an Automatic Tool Changer (ATC) that auto-changes grinding burs without interrupting the production process. |
Reviews
There are no reviews yet.