| Description | Lunula Laser is the most advanced model of non-invasive healthcare lasers. Equipped with all of the latest technology from Erchonia Corporation, Lunula targets foot fungus and Onychomycosis. | Advanced ergonomic handpiece with multi-spot, quick-zoom cartridges, and large touch screen GUI. | 2017 InMode Aesthetics InMode Contoura Cellulite Reduction System – with 3 Handpieces; Manufactured on 03/22/2017; Excellent Operating & Cosmetic Condition, Single Owner, Used for approximately 60+ Hours; SW Version: 2.31CTR; Reason for Selling: Downsizing; Handpieces Included: BodyFX, MiniFX, & Forma Plus; Also Includes: Footswitch. | The budget friendly LOGIQ P9 – a general imaging system designed for quick diagnostic exploration and full schedules. The LOGIQ P9 enables clinicians to make timely, confident decisions. | Alma Soprano XLi with SHR Diode & NIR Handpieces; Excellent Cosmetic and Operating Condition, Single Owner, Full Maintenance Service, Calibration, and Replacement of Flow Switch Performed on 08/30/2019, Record Available Upon Request; Original SHR Total Pulse Count = 10,241,483; NIR Total Pulse Count =2,545,712 ; Includes: (1) 810 Diode Handpiece with Sapphire Dual Chill Tip and 12×10 mm Spot Size, (1) NIR Skin Tightening Handpiece, (2) Keys, (1) Footswitch, (1) Operator Manual, (1) Consult Book, (1) Water Refill Kit, (1) Warning Sign, and 90 Day Warranty.km | 2015 Active Optical Extra 818 IPL Hair Removal and Skin Rejuvenation; Excellent Cosmetic and Operating Condition, Very Lightly Used for Demonstrations Only, Single Owner; Included Handpieces and Pulse Counts: Hair Removal Handpiece = 6,617 Pulses, Facial Handpiece = 2,190, Life for Each Handpieces is 250,000 Pulses. |
| Content | Erchonia Lunula Laser for Treatment of Toenail Fungus
The Erchonia Lunula Laser uses low-level laser light to target onychomycosis and requires very little time or set-up for physicians or their staff. This cutting-edge foot fungus laser treatment is the only system you can turn on and walk away – the device already has a pre-set protocol. In fact, as little as (4) 12-minute sessions are needed to treat the affected area.Configuration: 2 class 2 Line Generated Laser Diode Modules
Wavelength: 635nm & 405nm
Modulation: Constant Wave (CW)
Display: Full Color TFT Touch Screen Control Center
Power Source: 100-240VAC 50-60Hz
Chassis: Powder Coated Aircraft Aluminum
Treatment Area: 304 Stainless Steel for Anti-Microbial Properties
Housing: Injection Molded Process with Non-Allergen Material/Plastic
Weight: 23Ibs. (10.43 kg)
Accessories: 2-Keys, Power Cord & Laser Safety GlassesErchonia’s low-level lasers, Lunula is held to the highest safety standards and has been tested in the strictest trial conditions for effectiveness and safety. Because the Lunula laser uses extremely low wavelengths and frequencies, most patients experience no discomfort, burning, searing or pain of any kind. Each onychomycosis laser treatment is performed while the patient is awake, reducing downtime and allowing users to go about the rest of their day effortlessly.Experience the Erchonia Lunula Laser advantage when you use innovative Lunula laser treatments to target toenail fungus, with benefits such as:No pain, risks or downtime
No dangerous lasers or smoke fumes
Unattended procedure while the patient is awake
89 percent patient response to treatments
Made in the U.S.Treatment for toenail and foot fungus with Lunula Cold LaserAt Weil Foot & Ankle Institute, we are dedicated to providing our patients with the industry’s leading and highest quality treatment options. We understand that many of our patients come through our doors experiencing discomfort due to toenail fungus. It is our duty to offer convenient solutions that yield real results!Lunula Laser is the most advanced model of non-invasive healthcare lasers. Equipped with all of the latest technology from Erchonia Corporation, Lunula targets foot fungus and Onychomycosis.What is Lunula Laser?
The Erchonia Lunula laser device is a Low-Level Laser Light that is specifically designed for treating onychomycosis – toenail fungus. Lunula Laser is non-thermal so called “Cold Laser” meaning that there is no heat used and therefore there are 0 risks involved with it’s usage. The patient will feel no heat or any sensation from the laser.Lunula laser is made in the USA and is the 1st and only non-thermal FDA Market Cleared laser device for the temporary increase of clear nail for patients with Onychomycosis. | Lutronic Clarity II
Lutronic’s Clarity II is a high-powered, dual-wavelength platform that effectively delivers a wider range of parameters to help safely and efficiently treat the broadest indications with ease. The innovative design includes: a single fiber for all spot sizes(2-25mm), intuitive interface, and no need for calibration after any parameter change. Clarity II can save time and help facilitate faster, more effective treatments.
Higher power 755/1064nm platform for effective treatments up to 45%* faster.
Brilliantly removes hair, pigment, and vascular lesions in all skin types.
IntelliTrak technology and Temperature Sensing enable increased provider confidence and treatment efficacy.Clarity II
Key Feature
1. Powerful and faster
Provide up to 25mm spot size at a useable >2 Hz
High power performance
Up to 45% faster
2. Intelligent and convenientIntelliTraking system to prevent skip area and consistent treatment
Real time skin temperature monitoring system
3. Designed for versatilityIntelligent memory function to keep track of past treatment history in detail
Zoom cartridge system for treatment areaLutronic Clarity IIHow It Works
The CLARITY II Laser System contains two separate laser resonators, Alexandrite and an Nd:YAG, which generate pulse laser energy at the nominal wavelength of 755nm and 1064nm respectively. The output of each laser generator and the 515nm aiming beam are optically combined on the laser rail so that their beam paths are identical as they exit the laser system. This allows the use of a single delivery system for either the 755nm or 1064nm wavelength.Clarity II
with IntelliTrak technologyHigher-powered 755/1064nm platform laser
Up to 2X faster Laser Hair Removal Txs*
Exclusive shorter pulsewidths available including 1ms setting
for finer facial hairs
Breakthrough intelligent capabilities
IntelliTrak technology for faster more consistent Tx coverage
Temperature Sensing for real-time skin temp feedback
during Tx
Auto-calibration in seconds saves time and
improves productivity
Advanced, easy-to-use platform
Single fiber for all 2-24mm spot cartridges
Numerous skin rejuvenation capabilities including vascular,
pigment, and toning Txs
*At settings of: 755nm, 5ms, 12J/cm2: Clarity II at 22mm, 3Hz, IntelliTrak at 18% overlap vs.
older system at 18mm, 2Hz, and est. ~18% manual overlap. Geometric treatment coverage speed is
11.4cm/second with Clarity II vs. 5.1cm/second with older system. | 2017 InMode Aesthetics Contoura Cellulite Reduction System BodyFX
Vacuum:300 – 500 mBar
RF Output Frequency:Up to 50 W
Output Frequency:1 MHz
Temperature Cut-Off:Real time temperature monitoring and cut off operator selectable to 43°C
MINIFX – Only Available on Newest Generation Contoura’s
Chamber Size:1 inch x 1 inch
RF Output Frequency:Up to 50 W
Output Frequency:1 MHz
Negative Pressure:Up to 500 mBar
Temperature Cut-Off:Real time temperature monitoring and cut-off. Operator selectable up to 43°C
PLUS
RF Output Frequency: Up to 65 W
Output Frequency: 1 MHz
Temperature Cut-Off: Real time temperature measurements set by operator up to 43°C FULL BODY CONTOURING EXPERIENCE
Contoura is the reshaping solution to maximize patient results. WORKSTATIONS
Body contouring is one of the most in-demand aesthetic treatments. In many cases, patients are looking for improvements in body shape without surgical intervention 1. Contoura is a non-invasive body contouring solution that provides treatments that can be done during a lunchtime break.Contoura addresses: Body Reshaping, Cellulite Reduction and Skin Contraction. The Contoura is the ONLY non-invasive body contouring device proven in peer reviewed and published human studies to both permanently kill adipose tissue and contract the skin.PRACTICE BENEFITS 2017 InMode Aesthetics Contoura Cellulite Reduction System
Unlike other body contouring devices (which may carry high per procedure cost), Contoura has zero consumable costs or pulse counters. 4
Contoura is a business solution that allows you to grow your patient base without having to worry about ongoing fees.The use of radio frequency allows owners to provide both skin contraction and fat treatments, of all body areas, in one device. 5 This provides multiple revenue streams to a practices bottom line. This provides multiple revenue streams to a practices bottom line.1. According to the ASAPS 2017 statistical report, non-surgical fat reduction was listed as the third most performed procedure in 2017, after Botox and fillers. Source
2. Treatments take anywhere between 20-60 minutes. A series of 6-8 treatments is recommended.
3. Peer Reviewed Source
4. BodyFX is clinically proven to contract skin and reduce fat. BODYFX
The first and only non-invasive body contouring technology proven in peer reviewed and published human studies to both permanently kill adipose tissue and contract the skin. HOW DOES IT WORK
BodyFX is the first and only non-invasive body contouring and cellulite technology proven in peer reviewed and published human studies to both permanently kill adipose tissue and contract the skin *. BodyFX addresses problematic fatty tissue in larger body areas such as the abdomen, back (flanks), and thighs. BodyFX works by using different clinically proven modalities including radio-frequency energy and negative pressure applied to the skin and underlying fat. BODYFX Benefits
Acquire. Control. Extend. Technology to safely optimize peak energy.
Pre-heating of tissue reduces threshold for selective apoptosis of fat cells.
Sophisticated tissue temperature and impedance monitoring achieves and maintains optimal temperature end points to prevent atrophic damage.
Active temperature monitoring and control with cut-offs for unprecedented safety, virtually eliminating risk of thermal injury.MINIFX – Only Available on Newest Generation Contoura’s
A new, non-invasive solution to reduce the unsightly appearance of cellulite in smaller areas like the arm, neck and knees. HOW DOES IT WORK
MiniFX is a non-invasive contouring and cellulite technology that delivers a combination of clinically proven modalities, similar to the BodyFX, however, addresses problematic fatty tissue in smaller areas like the neck , arms, and knees. MINIFX BENEFITS
Acquire. Control. Extend. Technology to safely optimize peak energy.
Pre-heating of tissue reduces threshold for selective apoptosis of fat cells.
Sophisticated tissue temperature and impedance monitoring achieves and maintains optimal temperature end points to prevent atrophic damage.
Active temperature monitoring and control with cut-offs for unprecedented safety virtually eliminating risk of thermal injury. PLUS
Stimulates the formation of new collagen and improves the skin’s elasticity for long-lasting and remarkable results. HOW DOES IT WORK
Plus is a non-invasive sub-dermal heating applicator that stimulates sub-cutaneous tissue. Radio-frequency energy flows uniformly between the electrodes to provide a comfortable thermal experience, built-in temperature controls allow for the attainment of clinically proven optimal temperatures without concerns of hot spots or under treatment. PLUS Benefits
Acquire: Forma has a temperature sensor built into the hand piece which reads skin surface temperature 1000 times per second, allowing clinicians to acquire skin temperature in real time.
Control: Software algorithm allows unprecedented safety of RF delivery. The cut off temperature” feature reduces RF energy automatically when the hand piece senses that the required skin temperature has been reached.
Extend: Clinical evidence suggests prolonged exposure to temperature above 40°C is advantageous for optimal clinical outcomes. Only InMode’s A.C.E. technology allows you to utilize therapeutic temperatures safely and efficiently. | GE Ultrasound LOGIQ P9
Key Specifications/Special Features:
GE Logiq P9 Review:GE is the largest global ultrasound developer and manufacturer in the world. They design and produce a number of diagnostic ultrasound systems in many global R&D and production sites such as U.S., Japan, Korea, China, and India. The Logiq sereis targets the genral imaging market and has been very successful in the ultrasound market as well as healthcare.
The Logiq P series was created for the economy market, to provide some of the premium features at a lower cost bracket. GE Logiq P7 and P9 are successors of GE Logiq P5 and Logiq P6, two of the best selling GE Logiq systems for last two decades. The GE Logiq P7 and P9 are the latest in the Logiq series, launching in 2016. GE Healthcare shares ultrasound hardware and software with many global production sites so they can keep material cost down and pass the savings to their customers.GE Logiq P9 Ultrasound Features:The LOGIQ P9 is a highly capable ultrasound system that provides excellent image quality and productivity through easy to use tools across a wide range of applications. The LOGIQ P9’s imaging engine delivers crisp images in a mobile, ergonomically designed console. Automation
– 10.4” Touch Panel
– 21.5” Monitor
– Wireless LAN
– CrossXBeam Compound Imaging
– SRIHD Speckle Reduction Imaging
– Coded Harmonic Imaging
– Auto Image Optimization
– Auto IMT
– AutoEF
– Needle Visualization
– B-Flow
– 3D/4D Obstetric Imaging
– Elastography
– Stress Echo
– TVI/TVD Tissue Velocity and Tissue Doppler Imaging
– Virtual Convex for linear and sectoThis ultrasound system from GE Healthcare is a general imaging system designed for quick diagnostic exploration and full schedules.Whether the need is immediate triage or a comprehensive exam, you can rely on the budget friendly LOGIQ P9 system to provide the consistent image quality, comprehensive application coverage, and ease of use that enable clinicians to make timely, confident decisions.- Ergonomic and Adaptable
- Adjust system to fit most user needs and exams
- Multiple USB ports
- Touch control for easy parameter adjustment
- Adjustable monitor
- Front and rear handles
- Four active probe ports
- Gel warmer
- Storage shelf
- Easy to transport
Your trusted companionWhen every patient, every exam and every day are different, you need a constant that will help you gather information, make informed decisions and provide superior patient care. You need GE LOGIQ ultrasound, your trusted companion for confidently navigating daily challenges.
| ALMA SOPRANO XLI WITH SHR DIODE & NIR2012 Alma Soprano XLi with SHR Diode & NIR Handpieces; Manufactured 10/2012; Excellent Cosmetic and Operating Condition, Single Owner, Full Maintenance Service, Calibration, and Replacement of Flow Switch Performed on 08/30/2017, Record Available Upon Request; Original SHR Total Pulse Count = 10,241,483; NIR Total Pulse Count =2,545,712 ; Includes: (1) 810 Diode Handpiece with Sapphire Dual Chill Tip and 12×10 mm Spot Size, (1) NIR Skin Tightening Handpiece, (2) Keys, (1) Footswitch, (1) Operator Manual, (1) Consult Book, (1) Water Refill Kit, (1) Warning Sign, and 90 Day Warranty.km | Product Specifications |
|---|
| Light Source | Diode (continuous wave) | | Wavelength | 810 nm | | Fluence | Up to 120 J/cm2 | | Pulse Duration | 10 – 1,350 ms | | Spot Size | 12 x 10 mm | | Repetition Rate | Up to 10 Hz SHR Mode, 3 Hz Pulsed Mode | | Cooling | DualChill contact cooling, plus integrated adapter for Zimmer Cryo 5 | | Electrical | 120/230 VAC, 20/10 A, 50/60 Hz | | Dimensions | 20″ x 22.4″ x 47″ | | Weight | 110 lbs |
| Manufacturer Notes |
|---|
Virtually painless hair removal
Like earlier generations of the Soprano Family, The Soprano XL is the perfect solution to differentiate your practice in today’s cluttered laser hair removal market. Revolutionary pain-free Soprano treatments have redefined laser hair removal using the gold standard 810-nm diode and Alma’s IN-Motion technology. The Soprano’s virtually pain-free hair removal offers:
– Gold standard 810-nm laser diode provides reliable results – Sapphire DualChill tip and optional Zimmer Cryo 5 adapter – Permanent hair reduction of all pigmented hair on all skin types, including tanned skin – IN-Motion technology for virtually pain-free hair removal – Faster treatment times – huge 12×10 mm spot, up to 10 Hz repetition rate – Low cost of ownership with no disposables required – Easy to operate
The Soprano Family of platforms are the ideal standalone hair removal system that is safe, reliable, easy to use – and virtually painless. Through patient-friendly Pain-Free, Hair-Free hair removal procedures, the Soprano adds a proven revenue stream to your practice quickly and easily, as well as deep heating treatments through its NIR handpiece. Alma Lasers supports your Soprano investment through the Alma Lasers Marketing Assistance (A.L.M.A.) program, Office by Alma marketing materials, and an ongoing schedule of training programs.
Near-Infrared (NIR) module Dermal heating through uniform energy distribution, effective for treating minor muscle pain, joint stiffness and minor muscle strains. The Soprano’s NIR offers: Fast dermal heating – huge 18 cm2 spot Easy to use |
| Active Optical Extra 818 IPL Hair Removal 2015Handpieces:Hair Removal Handpiece and Facial Handpiece
Chilled Tip:Up to 4c
Pulse Interval:0.5~2 Seconds
Output Power:11-31 joule/cm2, upto 4,000W
Cooling System:Revolutionary dual cooling
Control:Intuitive touch screen control
Lamp’s Life Span:250,000 Flashes (Universal), 200,000 Flashes (Facial)
Treatment Area:7.5 cm2 (15*50mm) Universal, 4.5 cm2 (15*30mm) Facial
Wavelength:420-1100 nm
Weight:42Kg (including Stand, if device is not a table top)
Dimensions:44cm x 45cm x 100cm Extra-818Skin Rejuvenation
Pigmentation Treatment
Acne Treatment
Hair Removal
Vascular (Facial) TreatmentThe Extra – 818 is the outcome of more than a decade of treatments and thousands of devices operated worldwide. It contains It contains unique features:
* Contemporary touch screen control
* Built-in Patch Test procedure for examining the optimal energy level
* A stunning number of 450,000 flashes in both lamps.The Extra – 818, based on Active’s GEM-PL technology, sets sets a specific Pulse Pattern according to the selected treatment type, skin color, skin photosensitivity and treatment depth.
The treatment protocols and different pulse patterns take into account the tissue’s TRT (Thermal Relaxation Time) and the combined knowledge accumulated from thousands of treatments done during the years and clinical investigations done to confirm the findings.The combination of tested treatment protocols with high end engineering makes the Extra – 818 the perfect device for leading clinics.Revolutionary Cooling System
The Extra – 818 has a dual cooling system, controlled and monitored in order to ensure long lifetime to the lamp and a comfortable treatment to the patient.Competitive cooling systems “freeze” the skin so that during the treatment the skin temperature will rise to a bearable level. However, this “freezing” temperature might limit the results because the follicles will not reach the coagulation temperature. To ensure optimal results Active installed a special Processor that prevents overcooling the skin and maintains a uniform low temperature of the “glass” throughout the treatment. This revolutionary system enables the Extra – 818 to provide best results with optimal patient comfort.Research Program Active Optical Extra 818 IPL Hair Removal 2015
For clinical investigations, the self setting program allows researchers to set the treatment’s parameters according to their needs. Allowing advanced research with the device.
The energy levels in the self setting program can reach 31Jcm2 with high intensity of 4,000W. |
Reviews
There are no reviews yet.