| Description | Includes:
Hand-held 2 MHz 40 cm2
Hand-held 1 MHz 16 cm2Head
Key
Operators Manual | Recommended for all skin types, the PicoGenesis laser procedure is used to treat:• Brown spots
• Sun damage
• Age spots
• Melasma
• Hyperpigmenation
• Pigmented lesions | Fraxis PRO combines CO2 skin resurfacing technology with radiofrequency microneedling to treat a multitude of skin concerns. | The ability to work specifically in the deep dermis, without damaging the epidermis, is regulated in the RF Secret by the delay time of fractional radiofrequency. The needles are inserted at a rate of milliseconds equal to a stamping process in the skin and also withdrawn immediately. Only after the needles are penetrated into the desired skin layer, is carried out for a few milliseconds, a radio frequency pulse to set heat damage. While the penetration into the skin, the needles remain always cold. In order to achieve a deep and superficial effect, the needle depths can be varied individually in the respective treatment passes. | The new highly accurate 0.5 mm milling tool reliably delivers first class clinical results. Switch to Extra Fine milling mode for a higher level of detail with occlusal fissures and interdental areas on bridges. | The DWX-4W goes beyond dry milling and is the epitome of wet grinding technology. It uses 4-axis simultaneous movements to wet grind precision inlays, onlays, crowns, veneers and short-span bridges from glass ceramic and composite resins. |
| Content | CUTERA TRUSCULPT 3D BODY SCULPTING
Cutera Trusculpt 3D Body Sculpting A New Dimension in Body Sculpting
The rise in popularity of body sculpting can be attributed to two main factors: improved non-surgical treatment results and a population that values investing in themselves.The truSculpt 3D body sculpting device is ideal for patients and practitioners alike. truSculpt 3D is a non-invasive, Monopolar RF system optimized to deliver Targeted, Repeatable and Uniform sculpting of problem areas for a TRU 3D result with no visual downtime. truSculpt 3D takes a multi-dimensional approach to decrease circumference and reduce fat cells, by delivering and holding clinically therapeutic temperatures to the subcutaneous adipose tissue to achieve the clinical efficacy in the shortest possible treatment time with enhanced comfort.Glide Technique
truSculpt 3D glide technique offers consistent results – an average of 24% fat reduction, in a short treatment time over a large treatment zone.1 One 60-minute session provides clinically proven results in the most common treatment areas — the abdomen and flanks.Targeted RF Energy
The truSculpt 3D system uses a low frequency and high conductivity radiofrequency (RF) technology for deep penetration to target the subcutaneous fat layer while maintaining a comfortable surface temperature for patients. Over a 12-week period, the damaged fat cells are slowly broken down and eliminated from the treated subcutaneous adipose tissue2.Repeatable, Proven Outcomes
truSculpt 3D features a proprietary closed-loop temperature feedback mechanism that ensures therapeutic temperatures are met throughout each treatment. This means your patients are comfortable while achieving consistent results.Cutera Trusculpt 3D Body SculptingtruSculpt 3D Handpieces
truSculpt 3D gives you the flexibility to non-invasively address body sculpting concerns. With truSculpt 3D’s two handpiece options (40 cm2 and 16 cm2), you can decrease circumference and eliminate unwanted fat from large and small areas.Hand-held 2 MHz 40 cm2
For use in a gliding motion over fat pockets contained within the small, medium or large treatment templates. Handpiece covers up to a 576 cm2 treatment area on the abdomen and flanks in 60 minutes.Hand-held 1 MHz 16 cm2
For use with a stationary placement over soft tissue in areas that are smaller than the templates. The 16 cm2 handpiece covers petite treatment areas in 5 minutes.Includes:
Hand-held 2 MHz 40 cm2
Hand-held 1 MHz 16 cm2Head
Key
Operators Manual | Cutera Enlighten III Pico-Nano Second Tattoo RemovalThis next-generation PicoGenesis laser is an advanced, non-thermal way to treat pigmentary concerns, PicoGenesis harnesses a non-thermal, photomechanical effect paired with ultra-short—one trillionth of a second long—pulse durations. The perfect blend of technologies creates shockwaves that shatter pigments in the skin without damaging the surrounding tissue, while inducing dermal disruption and remodelling for true skin revitalisation.Unlike conventional laser toning that requires up to 15 treatment sessions and often lead to adverse side effects such as redness, swelling and itching. Thanks to the incorporated picosecond technology, in as few as three sessions you will experience a dramatic improvement in the reduction of pigmentation as well as a brighter, more uniform complexion in just 20 minutes—and all with no downtime! With entirely changeable parameters, this game-changing treatment an be used to benefit even the most challenging skin concerns, and can also effectively remove all colours of tattoos.Recommended for all skin types, the PicoGenesis laser procedure is used to treat : Cutera Enlighten III Pico-Nano Second Tattoo Removal• Brown spots
• Sun damage
• Age spots
• Melasma
• Hyperpigmenation
• Pigmented lesionsenlighten III combines multiple wavelengths (1064 nm, 532 nm and 670 nm) and picosecond + nanosecond pulse durations (750/660 ps + 2 ns) in a single platform for the treatment of unwanted multicolor tattoos, epidermal and dermal pigment, and skin revitalization across all skin types. Unlike conventional laser toning that require up to 15 treatment sessions and often lead to unpredictable results, PICO Genesis harnesses the power and flexibility of enlighten SR combined with its technical benefits in a dual delivery procedure to selectively shatter pigment and induce dermal disruption and remodeling for true skin revitalization in fewer than 3 sessions.“The enlighten laser system has been a game changer for my tattoo removal practice. I feel much more confident that we can deliver patients the results they have been wanting since laser tattoo removal was first invented.” | Cutera Fraxis PROinclude Cutera Fraxis PRO :Fraxis PRO Refine – This light RF treatment dispenses radiofrequency energy via small microneedles at varying depths of the skin. It addresses fine lines, large pores, wrinkles, stretch marks, and acne scars in a series of 3-4 treatments that can be performed on all skin tones, any time of year, and has little to no downtime.
Fraxis PRO Ultra-Light – This light laser peel provides gentle exfoliation via CO2 laser technology. A series of 3 sessions is recommended.
Fraxis PRO Ultra – This CO2 technology smooths and enhances skin tone and texture. It also promotes collagen production t through fractional skin resurfacing in a single treatment.
Fraxis PRO Revive – This treatment combines both CO2 laser and RF microneedling in the same session. The Fraxis PRO Revive achieves dramatic results in 1-3 sessions and can be performed on fair to medium skin tones with up to a week of downtime. Fraxis PRO combines fraction CO2 for skin resurfacing and radiofrequency microneedling for total dermal remodeling. This combination of CO2 laser energy and radiofrequency microneedling, allows this device to treat a range of skin conditions including: fine lines, wrinkles, acne scars, burn scars and stretch marks.The device can be used on the face and body, and the treatments can be used alone or in combination based on the patients needs. The device includes the following:Fraxis PRO Refine. A light RF treatment dispenses radiofrequency energy via small microneedles at varying depths of the skin. It addresses fine lines, large pores, wrinkles, stretch marks and acne scars.Fraxis PRO Ultra-Light. A light laser peel that provides gentle exfoliation via CO2 laser technology. It’s a perfect prejuvenating treatment to prevent signs of aging or address current skin concerns, like uneven texture, dull skin tone and overall complexion quality.Fraxis PRO Ultra. A powerful CO2 technology peels back years of aging by smoothing, brightening and enhancing skin tone and texture. It also promotes collagen production to address scarring, and crepey skin through fractional skin resurfacing. Fraxis PRO Revive. A signature treatment combines both CO2 laser and RF microneedling technologies in the same session, delivering intense comprehensive skin renewal for aging skin. | CUTERA SECRET RF 2.0CUTERA SECRET RF 2.0 MICRONEEDLING RADIO is a fractional micro-needling system (fractional radiofrequency) that exceeds the capabilities and limitations of fractional laser significantly. It is a system for extensive skin structure improvement and treatment of hyperhidrosis (radio frequency thermotherapy RFTT), based on both monopolar and fractionated on, bipolar radio frequency. An exact adjustment of the depth of the microneedles and the cold passing the epidermis allow the energy output directly into the target layer.
The needle depth is 0.5 mm to 3.5 mm can be varied, thereby opening up a wide range of treatments. The adjustable intensity of the RF energy allows for the treatment of various areas of the body with different energy performance.The ability to work specifically in the deep dermis, without damaging the epidermis, is regulated in the RF Secret by the delay time of fractional radiofrequency. The needles are inserted at a rate of milliseconds equal to a stamping process in the skin and also withdrawn immediately. Only after the needles are penetrated into the desired skin layer, is carried out for a few milliseconds, a radio frequency pulse to set heat damage. While the penetration into the skin, the needles remain always cold. In order to achieve a deep and superficial effect, the needle depths can be varied individually in the respective treatment passes.Dermal Remodeling from the Inside Out
Demand for non-surgical aesthetic procedures with little to no downtime is on the rise. More than 70% of patients are bothered by signs of aging such as fine lines and wrinkles as well as skin texture and discoloration.1Secret RF is a novel fractional radio frequency (RF) micro-needling system for tissue coagulation and hemostasis designed to stimulate and remodel collagen and address the common signs of aging. It is ideally suited for use on patients who wish to revitalize and refresh the appearance of their skin on all skin types. By adjusting the micro-needles, Secret RF can deliver energy at various depths, so that treatments can be tailored to address each patients individual concerns such as fine lines, wrinkles, acne scars, photoaging and striae at the depth required.Secret RF System
Secret RFs unique technology and customized delivery of energy enables providers to tailor treatments for a variety of skin concerns on all skin types.Customized Dermal Remodeling
Secret RF induces dermal remodeling by applying precisely controlled RF energy directly into various depths of skin from 0.5-3.5 mm – with minimally invasive micro-needles to spare the epidermis and reduce patient downtime.Skin Revitalization and Resurfacing Secret RF is a radio frequency (RF) fractional microneedling system that helps you deliver tailored energy to improve fine lines, wrinkles, and scars from the inside out. Secret RF in action
Applications include fine lines and wrinkles, photoaging, scarring, acne scars, striaeSecret RF technology Handpieces
Two sizes of treatment tips – 25 and 64 pin – give you customizable options for treating the face and body with precision and efficiency. | DENTSPLY SIRONA CEREC PRIMEMILLSpeedEngineered for speed and precision, the new CEREC Primemill inherits the proven strength of its predecessor and raises its powerful performance to entirely new heights.You can now mill zirconia restorations in Super Fast milling mode in around 5 minutes, cutting processing times by more than half. The improved grinding mode for high quality glass ceramics also grinds the material faster than ever before. The result? Satisfied patients and high productivity.QualityDENTSPLY SIRONA CEREC PRIMEMILL A combination of new electronics, software, motors and mechanical components contributes to finer resolution and enhanced dynamics. This results in outstanding restoration margins and surface details – for extremely precise results.The new highly accurate 0.5 mm milling tool reliably delivers first class clinical results. Switch to Extra Fine milling mode for a higher level of detail with occlusal fissures and interdental areas on bridges.VersatilityDENTSPLY SIRONA CEREC PRIMEMILL Welcome to a world where you‘re spoiled for choice! The new CEREC Primemill combines wet and dry milling and wet grinding. No matter the indication, with CEREC Primemill you can select from a broad range of material options from validated partners providing the flexibility and predictability you need to offer patients the best possible treatment.Choose from the full spectrum of machining options, including dry and wet milled zirconia, or wet grinding of glass and hybrid ceramics.ConvenienceDENTSPLY SIRONA CEREC PRIMEMILL The new 7” touch interface with user guidance guides operators step-by-step through the workflow, key maintenance procedures and other routine tasks, so you can delegate milling with complete peace-of-mind. The integrated block scanner is a time-saving new feature that automatically scans material blocks with compatible data matrix codes and records the information, including type, size, color and zirconia enlargement factor. All CEREC Primemill tools are fitted with a color-coded RFID chip that is read by the RFID tool reader, feeding into the tool status display, alerting the user if a tool needs replacing. This ensures all tools are performing at optimal levels. A LED light strip indicates unit status and milling and grinding progress.The all-new CERECThe latest generation of our CEREC system sets new standards so you can offer your patients an unmatched combination of single-visit dentistry and excellent quality.A unique solutionThe CEREC system comprises world-class components that interact perfectly ensuring seamless workflows. With CEREC Primescan, CEREC Software 5 and CEREC Primemill, digital chairside dentistry is faster, easier and more reliable than ever before.Outstanding resultsAfter 35 years of continuous optimization, CEREC gives you the options you need to treat multiple indications with the confidence that comes from outstanding results.
Designed to stand out – and fit inThe new CEREC Primemill does not just communicate seamlessly with other CEREC devices, but its sleek design is also the perfect match – and the ideal look for a progressive dental practice. | Roland DWX-4W Dental Milling UnitReliable High PerformanceIn addition to milling on X, Y and Z axes, the DWX-4W rotates pin-type blocks 360 degrees on a fourth axis (A axis) to support undercuts. The ball screw-driven 4-axis control allows for smooth, high-precision machining. The DWX-4W’s high-performance 60,000-RPM Jaeger spindle is known for its reliability and supports precision milling of glass ceramics and composite resin. With its multi-pin clamp, the DWX-4W is a wet dental milling machine that can mill up to three different pin-type materials continuously in one operation. As a result, prosthetics for up to three different patients can be produced in a single production run, saving time, labour and costs.Features and Benefits :Simultaneous 4-axis machining4-state Automatic Tool Changer (ATC)60,000 RPM Jaeger DentaDrive SpindleCAM software bundledVirtual Machine Panel (VPanel)Fully-integrated water and coolant filtration systemCoolant leakage & flow monitoring sensorsTool life monitoringMail notification systemSummary• Maximum Convenience
• Virtual Machine Panel
• Progress and Error Alerts for Error-Free Milling
• Coolant Compartment and Water Filtration
• Clean Cutting Area for Precision Milling
• Economical Open Architecture
• CAM Software Included
• Growth Potential
• Peace of MindEven novice users can quickly set up the DWX-4W and begin creating prosthetics the same day the machine arrives. Ease of use features include:Simple one-button design.colour-code LED status lights signal current job progress.Fully integrated pump and coolant system, with water collection filtration for maintaining a clean and efficient workspace.The Virtual Machine Panel (VPanel) allows users to configure settings from their computers, send CAM data the the DWX-4Wfor production, and track milling progress.Combine DWX Devices for a Complete Dental SolutionPair the DWX-51D and DWX-4W for the most flexible and productive dry and wet milling solution. using both dry and wet DWX devices gives you the technology and confidence to take on the maximum amount of glass ceramics and zirconia restorations. in contrast to dry and wet combo devices, a dedicated DWX dry and wet solution eliminates the switch back-and-forth through processes and the hours of cleaning in-between jobs.Summary:Capable of milling glass ceramics and composite resinCombines 4-axis milling with simple one-button operationsHigh-performance Jaeger DentaDrive spindleMulti pin-clamp to mil up to three different pin-type materials continuously4-Station automatic Tool Changer to change grinding burs for continuous productioncolour-code LED status lights signal machine errors and milling progressconnect up to four DWX devices to one computerAutomatic machine calibrationPair the DWX-51d and DWX-4W for the most flexible and productive dry and wet solution |
Reviews
There are no reviews yet.