| Description | Features- NEW TruFit 3D Virtualization allows you to simulate the lens inside the frame before edging, allowing you to minimize retouches and maximize your profit.
- One of the fastest lens edgers on the market.
- Process nearly any job type to avoid having to send out costly jobs to labs.
- Superior quality of finish and polish provides a premium look and feel that you can be proud of.
- Smart Design shape customization.
Wavefront Power-mapping technology for lens analysis and verification.
- Shelf Bevel to easily process high base-curve wrap frames.
- TruScan High base curve frame tracing
| The ZEISS Cirrus HD-OCT 4000 enable examination of the posterior and anterior of the eye at an extremely fine spatial scale, without surgical biopsy or even any contact with the eye. The Cirrus HD-OCT builds on and refines the retinal imaging technology first introduced with the ZEISS Stratus OCT™. HD-OCT stands for “high-definition optical coherence tomography.”Employing the advanced imaging technology of spectral domain optical coherence tomography, Cirrus HD-OCT acquires OCT data about 70 times faster (27,000 vs. 400 A-scans per second) and with better resolution (5 μm vs. ~10 μm axial resolution in tissue), compared to first-generation OCT technology. Cirrus acquires whole cubes of OCT image data, composed of hundreds of line scans, in about the same time as Stratus acquires a six-line scan. You can view these data cubes in three planes, or through three dimensions, giving you access to an extensive amount of retinal image data in one scan. | Laser-Like Precision
- Tactile control with minimal tissue drag
- Surface only thermal effect
- Predictable, char-free layer-by-layer dissection with optimal visualization of tissue planes
- Safe to use near nerves, vessels, and all delicate organs, including the heart | Complete Control of Lens Mounting
- Optimal monitoring of all trajectories, irrespective of finishing materials or shapes
- Absolute axis control thanks to hybrid edging technology: grinding + milling
- Ideally suited for quality finishing even on highest base curves
- Fast and accurate drilling with data acquired in a single operation
- Automatic centering and blocking for simple operation
| The iCare IC200 tonometer is designed for professional use in the surgical operation room, the emergency room and also the clinic. It uses the same patented rebound measuring principle found in other iCare tonometers. There is no need for drops, air or specialised skills for its use. The IC200 gives you positional freedom with a new premium design and user interface. It allows measuring whether the patient is sitting, standing, half-sitting or in the supine or lateral recumbent position. | Huvitz brings you the sleek and newly designed EXCELON HPE-410. Improved performance and stability based on years of finishing experience as well as incorporating new functions and performance based on our Customers’ feedback.Improved lens processing capabilities coupled with simple GUI and the ability to multi-task without constraint. The new EXCELON HPE-410 raises the standard of edging. Filled with new technologies and innovation the working time is greatly reduced by allowing multitasking when tracing, edging, and even network drilling. This best-selling patternless edger from Huvitz brings outstanding features and value. |
| Content | Briot Couture Lens Finishing System
When your standards are high, this is the partner you deserve. A revolution in edging, Briot Couture gives you a flawless finish with every frame – whatever the style, shape or curve. 3D pre-visualization lets you see your results before you even start working. TrueFit technology calculates curvatures to ensure seamless lens-frame pairing. Additionally, new sensors coupled with advanced software maintain constant pressure on the lens, reducing cycle time with no risk of misalignment – especially on hydrophobic lenses.Wavefront, The Future Of Blocking Briot Couture Lens Finishing System Our exclusive wavefront lens analysis allows you to see progressive lens designs on the frame trace before you even cut the lens, giving you the opportunity to validate that the shape and lens design are compatible without wasting time or money redoing the job. Shape Creation Limited Only By Your Imagination With Smart Design Milling And Shelf Beveling Create complex shapes and a true shelf bevel for high base-curve wrap frames with the Smart Design Milling feature in the Briot Couture. Exclusive TrueScan High-Curve Tracing Featuring our patented TrueScan technology, the Attitude Tracer/Blocker has a specially designed angled probe that will gently measure the contour of even the thinnest, most delicate metal frames or high base-curve wrap frames effortlessly. Brushless Technology For Faster, Quieter Operation Edge lenses faster and more efficiently while also reducing noise with new brusheless motor technology featured on the Evolution. Now, you can plug this edger in anywhere that has a 120V line adding extra placement flexibility in your optical lab. Provide The Best Finish On High Base-Curve Frames With Briot’s Best-Fit Technology Our advanced drive technology in conjunction with a small 90mm diamond wheel allows flawless finishing on high base-curve lenses and complex frames with sharp corners. Damaged Demo Lens? No Problem With Shape Creator 2.0 Accurately reconstruct broken or defective demo lenses with minimal effort using the new Shape Creator 2.0 technology on the Couture Blocker. | ZEISS Cirrus HD OCT 4000 Quad Core OCT
The ZEISS Cirrus HD-OCT 4000 (Cirrus HD-OCT or Cirrus) enable examination of the posterior and anterior of the eye at an extremely fine spatial scale, without surgical biopsy or even any contact with the eye. The Cirrus HD-OCT builds on and refines the retinal imaging technology first introduced with the ZEISS Stratus OCT™. HD-OCT stands for “high-definition optical coherence tomography.”Employing the advanced imaging technology of spectral domain optical coherence tomography, Cirrus HD-OCT acquires OCT data about 70 times faster (27,000 vs. 400 A-scans per second) and with better resolution (5 μm vs. ~10 μm axial resolution in tissue), compared to first-generation OCT technology. Cirrus acquires whole cubes of OCT image data, composed of hundreds of line scans, in about the same time as Stratus acquires a six-line scan. You can view these data cubes in three planes, or through three dimensions, giving you access to an extensive amount of retinal image data in one scan.Intended UseThe Cirrus HD-OCT with Retinal Nerve Fiber Layer (RNFL), Macular, Optic Nerve Head, and Ganglion Cell Normative Databases is indicated for in-vivo viewing, axial cross-sectional, and three-dimensional imaging and measurement of anterior and posterior ocular structures.Indications for UseThe Cirrus HD-OCT is a non-contact, high resolution tomographic and biomicroscopic imaging device. It is indicated for in-vivo viewing, axial cross-sectional, and three-dimensional imaging and measurement of anterior and posterior ocular structures, including cornea, retina, retinal nerve fiber layer, ganglion cell plus inner plexiform layer, macula, and optic nerve head. The Cirrus normative databases are quantitative tools for the comparison of retinal nerve fiber layer thickness, macular thickness, ganglion cell plus inner plexiform layer thickness, and optic nerve head measurements to a database of normal subjects. The Cirrus HD-OCT is intended for use as a diagnostic device to aid in the detection and management of ocular diseases including, but not limited to, macular holes, cystoid macular edema, diabetic retinopathy, age-related macular degeneration, and glaucoma.Note: The Cirrus HD-OCT is not intended to be used as the sole diagnostic for disease.Essential Performance ZEISS Cirrus HD OCT 4000 Quad Core OCTThe Essential Performance of the instrument is to provide accurate measurements of anterior and posterior ocular structure.Patient PopulationThe Cirrus HD-OCT may be used on all adults in need of diagnostic evaluation of the eye. This includes (but is not limited to) patients with the following disabilities or challenges:• Wheelchair user
• Very low or not measurable visual acuity
• Fixation problems
• Postural problems
• Deafness
• Large body, but not those above 99th percentile based on anthropomorphic dataThere is a general requirement that the patient be able to sit upright and be able to place their face in the chin and forehead rest of the instrument (with or without supplemental human or mechanical support).Cirrus HD-OCT is designed for in-vivo viewing, axial cross-sectional, and three-dimensional imaging and measurement of anterior and posterior ocular structures. | Domain Surgical FMX and FMwand Ferromagnetic Surgical SystemThe FMX Generator intelligently delivers electrical energy to the surgical instruments. The advanced generator features a patented software control algorithm that continuously monitors and adjusts the delivery of energy, ensuring that the optimal amount of heat is delivered to the tissue at all times. The large touchscreen display provides the entire surgical team immediate feedback on power setting levels and changing settings is as easy as touching the display. The FMX Generator has earned the Type CF (“Cardiac Floating”) rating.Laser-Like Precision
- Tactile control with minimal tissue drag
- Surface only thermal effect
- Predictable, char-free layer-by-layer dissection with optimal visualization of tissue planes
- Safe to use near nerves, vessels, and all delicate organs, including the heartMinimal Thermal Injury
- As little as 1/10th the thermal injury of monopolar electrosurgery
- As few as 80 microns (0.08 mm) of thermal spread
- Clear margins for reliable pathology specimens
- Surgeons note less unintended damage to tissue, leading to reduced use of blood products during surgery, and less post-operative edema and drainageElectrical Silence
- No electrical current passes through tissue
- No grounding pad
- No spark, arcing, or stray currentPrepare the FMwand by following these simple steps:
- Plug the FMX Power Module into the front panel of the FMX Generator
- Snap the power module into the back of the FMwand Handpiece
- Set the power settings on the generator and the FMwand is readyFMX Generator Technical Specifications Domain Surgical FMX and FMwand Ferromagnetic
- Operating Environment Conditions
Temp: 10° to 30° C (50° to 86° F)
Humidity: 15% to 85% Non-condensing
- Storage Conditions
Temp: -20° to 65° C (-4° to 149° F)
Humidity: 15% to 85% Non-condensing
- Shipping Conditions
Temp: -20° to 65° C (-4° to 149° F)
Humidity: 15% to 85% Non-condensing
- Moisture Protection
Generator: IPX1
Foot Pedal: IPX7 minimum
- Generator Dimensions : 14″ x 4″ x 12″ 35.6 cm x 10.2 cm x 30.5 cm
- Generator Weight : Approximately 20 lbs. (9 kg)
- Power Requirements
Voltage: 110/220/230 Vac
Current: 4/2A rms max
Frequency: 50/60 Hz
- Power Output : 60W Max
- Fuses
For 110V: T 5A L 250V
For 220V/230V: T 2.5A L 250V
- Operating Frequency : 40.68 MHz
- Mode of Operation : Intermittent Operation 10 sec. ON, 30 sec. OFF
- Protection Class : Class I
- Output Type : Type CF | Essilor Mr Blue 2.0 Sun & Sport Edition Patternless EdgerFrom Essilor Instruments, Mr Blue Sun & Sport Edition edging system expands your offer:- Produce Chemistrie clips as custom-made sunwear
- Achieve Half Jacket frame coverage for endurance and extreme sports
“Sun & Sport Edition” and its special features are available for every “Mr Blue Sun & Sport Edition” edger order, associated with a new orChemistrie clips :- Generate additional revenues through an alternative to both prescription sunwear and unsatisfactory clip-on sets..
- Magnetic lens layering system: a patented technology that attaches lenses to virtually any prescription eyewear using magnets embedded in the lenses.
- Base curve matched, lightweight, custom made.
Half Jacket frames : Essilor Mr Blue 2.0 Sun & Sport Edition Patternless Edger- Capitalize on the rising popularity of endurance and extreme sports.
- Achieve a wider frames coverage with the partial step bevel inn addition to full high curve, asymmetric bevel, and step bevel.
- A dedicated process and assistance on your machine supported by new tools.
already owned Mr Blue Tracer or Mr Orange Tracer.Mr Blue 2.0 is on the cutting edge of innovation – serving as a genuine ECP partner since its launch. Now featuring a whole range of new functions and even greater flexibility than before, Mr. Blue 2.0 is the perfect solution for:- Working with cutting-edge technology
- Differentiating your offerings
- Optimizing your edging process
- Manufactured by Essilor | CE- and UL-certified
Chemistrie Clips to Bring You a New Innovative Sun Offer- Generate additional revenues through an alternative to both prescription sunwear and unsatisfactory clip-on sets
- Magnetic lens layering system: a patented technology that attaches lenses
to virtually any prescription eyewear using magnets embedded in the lenses
- Base curve matched, lightweight, and custom made
- A specifically-designed process on Mr Blue Sun & Sport Edition together with available materials and support
Half Jacket Frames to Excel in Your Sports Offer- Capitalize on the rising popularity of endurance and extreme sports
- Achieve a wider frames coverage with the partial step bevel(1) in addition to full high curve, asymmetric bevel, and step bevel
- A dedicated process and assistance on your machine supported by new tools
(1) Bevel a portion of the thick lens edge into a step to fit into frames so that only a part of the edge is inserted, and protrusions on the lens hook into indentations in the frame groove | Icare ic200 TonometerThe device is based on a rebound measuring principle that requires no drops, air or specialized skills for its use. The new premium design and user interface bring IOP measuring to a new level. The Icare ic200 tonometer is designed for professional use in the surgical operation room and emergency room as well as the clinic. The ic200 is fully portable, requires no anesthesia and its freedom of positioning allows measuring whether the patient is sitting, standing, half-sitting or in the supine or lateral recumbent position.A high-visibility indicator at the probe base confirms your positioning of the tonometer prior to measurement. A green light indicates measurement will be reliable, a red light indicates incorrect positioning. Features:
- Effortless probe loading with the same probe as for the Icare TA01i and ic100 tonometers
- The probe can’t accidentally drop from the device
- Easy menu in many languages
- Wireless (Bluetooth) printing and measurement transfer - Revolutionary design to allow for positional freedom when taking IOP measurements
- Innovative automatic measuring sequence allows for 6 automatic measurements or single measurements to be taken with the same button
- Intelligent positioning system for correct alignment of the tonometer
- Powered by AA batteries
Specifications:
- Dimensions : 43mm[W] x 104mm[H] x 214mm[L]
- Weight : 165 g (without batteries), 260 g (with 4 x AA batteries)
- Power supply : 4 x AA non-rechargeable batteries, 1.5V alkaline LR6
- Measurement range : 7 - 50 mmHg
- Accuracy : ±1.2 mmHg (≤20 mmHg) and
: ±2.2 mmHg (>20 mmHg)
- Repeatability (coefficient of variation) : <8% Package Includes:
- Icare ic200 tonometer
- 4 x AA batteries
- Aluminum case
- IOP pad
- Probe base cover
- Quick guide
- Screw driver
- Silicone grip
- Spare probe base
- Instruction manual
- Warranty card
- Wrist strap | Huvitz HPE-410 Patternless EdgerFeatures of the HPE-410| ▪ Hydrophobic Mode Concept
▪ 3 Roughing Methods for Stability in Edging
▪ Easier Hydrophobic Mode
▪ Adaptive Clamp Chuck
▪ 4 Retouch Options
▪ Scan & Cut
▪ High responsive 9.7″ Color Display
▪ Advanced Edging Modes
▪ 8 difference types of edging
▪ More sophisticated 6 bevel positions and preview mode | ▪ 5 kind of lens material processing
▪ 3 Feeling Position Modes
▪ Powerful Digital Pattern and Editing function
▪ Intelligent Algorithm
▪ Built-in Tracer reading with three-dimensional measurements
▪ Parallel process of edging and drilling
▪ Expert Job Editor
▪ Powerful multi-tasking
▪ Direct DCS (OMA) Import without File Conversion |
| |  | | Hydrophobic Mode Concept
Easily adjustable roughing intensity and lens rotation speed, combined with an Adaptive Chuck and Clamp pressure control for minimizing or eliminating Axis twist and surface damage during lens processing. | | | 3 Roughing Methods for Stability in Edging
Can choose the roughing method (Normal, Spiral, Axial) based on the type of lens material and the amount of coating.
Roughing proceeds more steadily if adding lens diameter directly in Normal or Spiral Roughing mode. | |  | | Easier Hydrophobic Mode
With ultra-water-repellent coated lenses that are susceptible to slipping and deflection, processing options such as roughing method, safety mode, pressure control of the adaptive clamp chuck, and rotation speed of the lens can be adjusted and operated at the same time. | | | Adaptive Clamp Chuck to prevent lens deformation
Minimizes axis twist which prevents lens & coating damage when processing High-curved Lenses:
▪ Automatic adjustment for 3-step pressure (high, medium, low) / Manual input adjustment (from 50 to 150%) | | | 4 Retouch Options
After completing a set of processes you can easily modify the size, polishing, grooving and safety beveling.
A list of the latest 3 jobs. | | Huvitz HPE-410 Patternless Edger |  | | Scan & Cut which can make special shapes
Individual design – now you can directly scan a variety of lenses or convert image files to job files and begin cutting (with HAB-8000 and HDM-8000 configuration). | |  | | High responsive 9.7″ Color Display
Intuitive GUI interface with Huvitz’s simple yet sophisticated design.
Touch method which can be easily started even if machine operation is not familiar. | | | Advanced Edging Modes
This new generation of Excelon is very user friendly. It has a wide variety of modes to suit all User requirements. A higher level of efficiency and functionality can also be possible by integrating the optional auto blocker and/or driller. | |  | | 8 difference types of edging to match frames
Customized lens processing is possible such as Bevel, Rimless, Mini Bevel, Partial Bevel, Partial Grooving, Dual Grooving, and Hybrid Grooving. | |  | | More sophisticated 6 bevel positions and preview mode
Optimal position is chosen with the automatic calculation of lens type, thickness, and frame through its 2D and 3D simulations.
▪ Automatic bevel position / Manual bevel position (Percentage %, Front offset, Rear offset, Base Curve) | | | The latest trend material is OK! 5 kind of lens material processing
Lens processing with a wide range of materials and curvatures such as Plastic (CR39, Hi-index), Polycarbonate, Trivex, Glass. | |  | | 3 Feeling Position Modes for various Conditional Measurements
Optimum feeling positioning according to various situations and conditions such as measuring in normal mode, changing frames and Bevel shortfall checking:
▪ 3 Feeling Position Modes : Both side, Front only for CAP lens, Rear only for EX lens.
▪ Feeling after roughing option for Safety bevel / Grooving Quality. | |   | | Powerful Digital Pattern and Editing function
▪ Function to modify and change lens size, shape and rotation.▪ Frame type change and repairing : Easily modify or replace the distorted shape of the frame through R/L exchange, R/L mirroring.▪ Easy-to-use hole editing function : Edit, with just one click, holes of a variety of designs including rectangles and slots with the many shapes of both rimless and semi-rimless frame designs. (Note: must be connected to optional HDM-8000).▪ Intuitive layout design function : Directly enter and edit layout information in various frame shape.▪ Easy Click editing function : Function to edit the magnet position (Chemistrie Clip) for detachable sunlenses and reader lenses. | | | Intelligent Algorithm for Improved Fitting Quality
Fitting quality is even better than previous models by applying Intelligent Algorithms such as Automatic correction of lens size, bevel or grooving, and PD correction. | |  | | Built-in Tracer reading more precisely with three-dimensional measurements
▪ Auto or Semi-Auto or Concave mode can be selected.
▪ The stylus can be manually placed in the narrow groove of challenging frames in the Semi-Auto mode and the concave shape of the demo lens is recognized in the Concave mode.
▪ Tracing frames and at the same time edging lenses gains efficiency and dramatically cuts-down overall job time. | | | Parallel process of edging and drilling without any restrictions (when combined with HDM-8000)
While drilling one side, the new EXCELON can edge the other side. It is even possible to finish the next task while continuing to drill. | |  | | Expert Job Editor shows preview and can run immediately
▪ Function to instantly search, preview and execute all tasks.
▪ Choosing the advanced operation options for experts, giving the operator the ability to directly input the tilt angle of a frame or the curve of a lens. | | | Powerful multi-tasking with the new concurrent processing Job Manager
▪ Function to show step-by-step job list at a glance and execute the next job while edging.
▪ Large memory storage for unlimited job data.
▪ Barcode interface support for changing job file name, importing and searching job files. | |  | | Direct DCS (OMA) Import without File Conversion
Allowing users to save the full information, for future use, such as frame shapes, FPD, edging types, lens materials into SD card memory without the hassle of converting DCS (OMA) job files.
▪ Providing most of the ready-made job data in DCS format, collected from websites of leading frame makers.Maintaining folder-based DCS files to avoid duplicate file names within a folder.
▪ Job data imports from external devices such as DCS host, external tracer / Auto blocker or HERA Intraworks (PC). |
|
Reviews
There are no reviews yet.