View cart “Xray2go Hand Held Dental Portable X-Ray System For Sale” has been added to your cart.
-40%
Availability: In Stock
3Shape D810 Dental Scanner For Sale
$7,500.00$4,500.00
The wax-up fixture – enables scanning of wax-ups and bits from all angles and sides. The wax-up is suspended in wires that will be invisible in the scan result. Two-cast fixture – enables users to firmly set 2 models, preparation and antagonist, in occlusion so they do not move during scanning. The Two-cast fixture functions like a clamp making it easy to set while holding the models in occlusion.
Other people want this. 15 people have this in their carts right now.
Combining accuracy and speed with Multi-Die scanning capabilities
The 3Shape D810 Dental Scanner takes labs to whole new productivity
levels with high speed scanning, and ultra-efficient batch and
multi-case processing capabilities.With its new and unique Texture Scanning feature plus 5.0 megapixel
cameras,
3Shape’s D810 scanners wield the market’s most advanced 3D
scanning technologies. 3D scanning in connection with designing
implant bridges and bars requires very high accuracy.
series scanners are among the few that can deliver reilable data for
these indications.
Capture complete textures and pencil markings
Implant bridge and bar accuracy
Market’s most extensive suite of scan indications
High productivity with Multi-Die scanning
3shape D810 3D Scanner
Highly Accurate Scanning
Scan time Die: 25 sec (30 sec)
Resolution 2 cameras, 5.0 Mega Pixels
Accuracy Ultra High accuracy: < 15 Microns Texture Scanning technology High detail detection and capture of
hand-drawn markings on model
Multi-Die Scanning Scan batches for single or multi-case processing
The wax-up fixture – enables scanning of wax-ups and bits from all
angles and sides. The wax-up is suspended in wires that will be
invisible in the scan result.
Two-cast fixture – enables users to firmly set 2 models, preparation
and antagonist, in occlusion so they do not move during scanning. The
Two-cast fixture functions like a clamp making it easy to set while
holding the models in occlusion.
3shape D810 3D Scanner The impression fixture – Enables automatic alignment of upper and
lower when scanning triple-tray impressions. The impression is fixed
in a permenant position in the flippable holder. The scanner and
software can recreate the precise upper and lower relationship in the
digital model.
Featrues:
– 2 cameras with reduced angle enable impressions, deep inlays and full undercuts to be scanned effectively.
– The 3-axis motion system allows the dental object to be tilted, rotated and translated, facilitating scanning from any viewpoint enabling scanning of more than 350 degrees of a sphere.
– Scan parameters are automatically adjusted to the object’s material for accurate color capture.
– Automatic scanning with the multi-die plate.
Technical Specifications
– Scan Time (Final 3D Model): Single die: 25 sec (30 sec)
– 3-Unit Bridge: 100 sec (125 sec)
– Resolution: 2 cameras, 5.0 Mega Pixels
– Accuracy: Ultra high: <15 Microns
– Material Color: Material color independent
– Scan Indications: Market’s most extensive range.
– Dimensions (W x H x D): 37 x 29 x 33cm (14? x 11?x 13?)
– Texture Scanning Technology: High detail detection and capture of hand-drawn markings on model
– Multi-Die Scanning: Scan batches for single or multi-case processing
3Shape D500 Dental Lab CAD Scanner, Computer
Reviews (0)
Reviews
There are no reviews yet.
Be the first to review “3Shape D810 Dental Scanner For Sale” Cancel reply
The wax-up fixture – enables scanning of wax-ups and bits from allangles and sides. The wax-up is suspended in wires that will beinvisible in the scan result.Two-cast fixture – enables users to firmly set 2 models, preparationand antagonist, in occlusion so they do not move during scanning. TheTwo-cast fixture functions like a clamp making it easy to set whileholding the models in occlusion.
Economical pressing and firing performance. Top quality results.
The ultimate in ease, material flexibility and unattended production, the DWX-52DC dental milling machine is designed to greatly expand your lab production and profit. Featuring a 6-slot Automatic Disc Changer, 15-station Automatic Tool Changer and other automated features, it gives users of all skill levels an exceptionally powerful, efficient and affordable dental restoration solution.
At only 4.2 pounds, the portable x-ray, is considered to be the lightest x-ray generator on the market. Many design features are included with an LCD Display, and High Frequency Tube, a perfect balance of technology and simplicity. There is no doubt that the EXARO is the best, handheld and portable x-ray, available.
The new highly accurate 0.5 mm milling tool reliably delivers first class clinical results. Switch to Extra Fine milling mode for a higher level of detail with occlusal fissures and interdental areas on bridges.
iTero HD2.9 simply allows to digitally scan a prepared tooth and wirelessly send this information directly to the dental laboratory for fabrication of a CAD/CAM crown without the gooey mess.
Content
3Shape D810 Dental Scanner
Combining accuracy and speed with Multi-Die scanning capabilities
The 3Shape D810 Dental Scanner takes labs to whole new productivity
levels with high speed scanning, and ultra-efficient batch and
multi-case processing capabilities.With its new and unique Texture Scanning feature plus 5.0 megapixel
cameras,3Shape’s D810 scanners wield the market’s most advanced 3D
scanning technologies. 3D scanning in connection with designing
implant bridges and bars requires very high accuracy.
series scanners are among the few that can deliver reilable data for
these indications.Capture complete textures and pencil markings
Implant bridge and bar accuracy
Market’s most extensive suite of scan indications
High productivity with Multi-Die scanning3shape D810 3D Scanner
Highly Accurate Scanning
Scan time Die: 25 sec (30 sec)
Resolution 2 cameras, 5.0 Mega Pixels
Accuracy Ultra High accuracy: < 15 Microns
Texture Scanning technology High detail detection and capture of
hand-drawn markings on model
Multi-Die Scanning Scan batches for single or multi-case processingThe wax-up fixture – enables scanning of wax-ups and bits from all
angles and sides. The wax-up is suspended in wires that will be
invisible in the scan result.
Two-cast fixture – enables users to firmly set 2 models, preparation
and antagonist, in occlusion so they do not move during scanning. The
Two-cast fixture functions like a clamp making it easy to set while
holding the models in occlusion.3shape D810 3D Scanner The impression fixture – Enables automatic alignment of upper and
lower when scanning triple-tray impressions. The impression is fixed
in a permenant position in the flippable holder. The scanner and
software can recreate the precise upper and lower relationship in the
digital model.Featrues:
- 2 cameras with reduced angle enable impressions, deep inlays and full undercuts to be scanned effectively.
- The 3-axis motion system allows the dental object to be tilted, rotated and translated, facilitating scanning from any viewpoint enabling scanning of more than 350 degrees of a sphere.
- Scan parameters are automatically adjusted to the object’s material for accurate color capture.
- Automatic scanning with the multi-die plate.Technical Specifications
- Scan Time (Final 3D Model): Single die: 25 sec (30 sec)
- 3-Unit Bridge: 100 sec (125 sec)
- Resolution: 2 cameras, 5.0 Mega Pixels
- Accuracy: Ultra high: <15 Microns
- Material Color: Material color independent
- Scan Indications: Market’s most extensive range.
- Dimensions (W x H x D): 37 x 29 x 33cm (14? x 11?x 13?)
- Texture Scanning Technology: High detail detection and capture of hand-drawn markings on model
- Multi-Die Scanning: Scan batches for single or multi-case processing
3Shape D500 Dental Lab CAD Scanner, Computer
The Programat EP 3010 is characterized by cost effectiveness and high-quality press and firing results. In addition, the Programat EP 3010 is optimally coordinated with Ivoclar Vivadent press ceramic materials such as IPS e.max Press.In comparison to its predecessor model EP 3000, the operation of the Programat EP 3010 has become even simpler due to the new colour touch display, the modern icons, the intuitive menu-based navigation and the proven membrane-sealed keypad.The new QTK2 heating muffle in combination with the SiC bottom reflector ensures homogeneous heat distribution in the firing chamber. As a result, the investment ring is preheated more evenly and reliably. Furthermore, these features enable the user to press difficult-to-press objects, e.g. with very thin marginal areas, and to achieve even higher quality results.The electronic press drive with force sensor ensures the precise control of the press plunger in the micrometre range. The integrated Crack Detection System (CDS) immediately interrupts the press process if a crack in the investment ring occurs. Therefore, restorations are optimally protected.
Advantages:
Programs are optimally coordinated with Ivoclar Vivadent materials.
QTK2 muffle technology with SiC bottom reflector for homogeneous heat distribution.
Colour touch screen and proven membrane-sealed keypad for easy operation.
Electronic press drive with force sensor produces high-quality press results. No compressed air connection required.
Crack Detection System detects cracks in the investment ring.
Easy and automatic temperature calibration at two reference points (ATK2).
Simple software update via USB flash drive.
Remote diagnosis function via data file for optimum support by a service centre.
Broad range of programs: 300 individual firing and 20 individual press programs.
Power Saving Technology for power-saving operation.
The DWX-52DC Dental Mill with Disc Changer is the newest addition to the popular DWX series of 5-Axis Dental Milling Machines. With a combination of automated functions designed to help reduce manual work, production of dental restorations is now even more efficient and reliable. The DWX-52DC’s open architecture means it can be used with the CAD/CAM software that your technicians are already familiar with in order to cut learning time and create the optimum workflow for your production environment. The DWX-52DC provides an efficient digital solution for both dental laboratories seeking to boost production capabilities, as well as labs looking to expand into the digital realm.
95 mm (diameter), height max. 35 mm
Pin diameter: 6 mm
Pin diameter:
6 mm
Loadable workpiece weight
Up to 850 g
Number of adapters housed
6
Operating speed
XYZ axis:
0.24 to 70.9 in./min.(6 to 1,800 mm/min.)
Spindle motor
Brushless DC Motor
Spindle speed
6,000 to 30,000 rpm
Rotary axis travel angle
A:
±360°
B:
±30°
Number of burs housed
15
Attachable bur
Shank diameter:
4 mm
Length:
40 to 55 mm
Compatible compressed air
0.2 MPa
Interface
USB
Control command set
RML-1, NC code
Power requirements
AC 100 V to 240 V ±10%, 50/60 Hz, 2.0 A
(overvoltage category II, IEC60664-1)
Power consumption
Approx. 200 W
Operating noise
During operation:
70 dB (A) or less (when not cutting),
During standby:
45 dB (A) or less
External dimensions
Width x Depth x Height:
34.6 x 26.0 x 23.6 in. (880 x 660 x 600 mm)
Weight:
105 kg (231.5 lbs.)
The ultimate in ease, material flexibility and unattended production, the DWX-52DC dental milling machine is designed to greatly expand your lab production and profit. Featuring a 6-slot Automatic Disc Changer, 15-station Automatic Tool Changer and other automated features, it gives users of all skill levels an exceptionally powerful, efficient and affordable dental restoration solution.
FDA Registered. Welcome to the new way of taking X-rays in Dental Offices: x-ray2go is the way to go! x-ray2go is a portable hand held camera that uses a high frequency inverter to generate a stable X-ray output with DC high voltage. This effective DC unit enables patient and operator to be exposed to the least amount of radiation. The integrated compact “Camera like” generator increases the user’s confidence and decrease the negative perception patients have about X-rays. It is small: 5.6″ (W) x 3.3″ (D) x 1.2″ (H). Best of all it only weighs 4.18 Lbs (1.9 Kgs), the lightest on the market.• Portability – room to room ease
• No installation necessary versus complex, expensive and time consuming on-wall installation.
• No need for pass troughs
• Large LCD display – easy to read
• Simple touch controls
• Adjustable exposure time
• Hundreds of images from one (1) battery charge
• High resolution diagnostic images
• No blur from hand movement high-frequency generator produces clear images while reducing
patient dose
• Shield protects the operator from scattered radiation – small dose of radiation emitted
• Leading technology provides the highest level of safety, quality and patient care
• Perfect for special needs patients, home health care patients, nursing home patients, children and
veterinary practices
• Perfect for small operatories
• Perfect for mobile dentistry where room is a big factor
Specifications Xray2go Hand Held Dental Portable X-Ray System
Portable, cordless x-ray device
· FDA Registered – K082875
· Safe to use-leakage and scatter radiation are less than conventional wall mounted units
· Small & lightweight (4.2 lbs)
· Camera-like ergonomic design
· 100’s of images on single charge!
· Compatible with both digital & film use
· Simple operation
· Highest image quality
· Wide exposure range
· Lowest patient exposure
· Compact outside—smart inside
· Great staff acceptance
· Convenient for children and “x-ray phobic” patients
· Helps eliminate patient fear and reduces x-ray rejection
DENTSPLY SIRONA CEREC PRIMEMILLSpeedEngineered for speed and precision, the new CEREC Primemill inherits the proven strength of its predecessor and raises its powerful performance to entirely new heights.You can now mill zirconia restorations in Super Fast milling mode in around 5 minutes, cutting processing times by more than half. The improved grinding mode for high quality glass ceramics also grinds the material faster than ever before. The result? Satisfied patients and high productivity.QualityDENTSPLY SIRONA CEREC PRIMEMILL A combination of new electronics, software, motors and mechanical components contributes to finer resolution and enhanced dynamics. This results in outstanding restoration margins and surface details – for extremely precise results.The new highly accurate 0.5 mm milling tool reliably delivers first class clinical results. Switch to Extra Fine milling mode for a higher level of detail with occlusal fissures and interdental areas on bridges.VersatilityDENTSPLY SIRONA CEREC PRIMEMILL Welcome to a world where you‘re spoiled for choice! The new CEREC Primemill combines wet and dry milling and wet grinding. No matter the indication, with CEREC Primemill you can select from a broad range of material options from validated partners providing the flexibility and predictability you need to offer patients the best possible treatment.Choose from the full spectrum of machining options, including dry and wet milled zirconia, or wet grinding of glass and hybrid ceramics.ConvenienceDENTSPLY SIRONA CEREC PRIMEMILL The new 7” touch interface with user guidance guides operators step-by-step through the workflow, key maintenance procedures and other routine tasks, so you can delegate milling with complete peace-of-mind. The integrated block scanner is a time-saving new feature that automatically scans material blocks with compatible data matrix codes and records the information, including type, size, color and zirconia enlargement factor. All CEREC Primemill tools are fitted with a color-coded RFID chip that is read by the RFID tool reader, feeding into the tool status display, alerting the user if a tool needs replacing. This ensures all tools are performing at optimal levels. A LED light strip indicates unit status and milling and grinding progress.The all-new CERECThe latest generation of our CEREC system sets new standards so you can offer your patients an unmatched combination of single-visit dentistry and excellent quality.A unique solutionThe CEREC system comprises world-class components that interact perfectly ensuring seamless workflows. With CEREC Primescan, CEREC Software 5 and CEREC Primemill, digital chairside dentistry is faster, easier and more reliable than ever before.Outstanding resultsAfter 35 years of continuous optimization, CEREC gives you the options you need to treat multiple indications with the confidence that comes from outstanding results.
Designed to stand out – and fit inThe new CEREC Primemill does not just communicate seamlessly with other CEREC devices, but its sleek design is also the perfect match – and the ideal look for a progressive dental practice.
iTero HD2.9 simply allows to digitally scan a prepared tooth and wirelessly send this information directly to the dental laboratory for fabrication of a CAD/CAM crown – without the gooey mess. The wireless transmission saves shipping time and eliminates distortion that can often be found with traditional stone modelsThe digital scan is, quite literally, digitally perfect. We then deliver the digital scan to our lab where a precision fitting restoration is created.iTero HD2.9 system eliminated the uncomfortable patient experience of traditional impressions, utilizes advanced state of the art digital technology, and provides with superior fitting restorations with little or no adjustmentsiTero Intra-Oral Scanner
Model: HD2.9
2014 Date of Mfg.
Brochure/Video: Click Here
Limited Use
Includes:
iTero Software (pre-loaded)
90 Day Parts Warranty
User Manual(s)
Free Standard Shipping (Commercial USA Addresses)
Its ergonomic design comes with safe docking station. It has thin fiber optic cable which enables quick data transfer from the wand to the cart. This optimized cable length assists various cart positions in the operatory.Orthodontic treatment is more than just straightening teeth; it’s about ensuring your teeth and jaws are in alignment. To achieve this, we need to get an accurate look at where your teeth are positioned. To do this, we use the iTero Intraoral digital scanner.A good impressionIn the orthodontic and dental industries, ‘impressions’ is the term we use for getting a good picture of where your teeth currently sit. These impressions were previously taken using a type of dental cement. Pasted on your teeth, patients were required to lie for a few minutes while the cement-like material set. The dental professional could then remove the set material which had formed an ‘impression’ of your teeth.This process was messy, rather unpleasant and not very comfortable. Fortunately, that method is a thing of the past. These days, we use scanning technology and at L&L Orthodontics, our technology of choice is the iTero Intraoral digital scanner.
What is the iTero scanner?
The iTero scanner is new 3D orthodontic scanning technology. Using the latest developments in intraoral scanning, the iTero scanner accurately scans your teeth as part of your orthodontic assessment. The iTero scanner is made up of a small, wand-like device which is used to scan your teeth and jaws. The data it is collecting then appears on the computer screen, allowing you to see the ‘impressions’ the scanner is taking.The iTero scanner works in with Invisalign®* treatment and lets you see what your teeth will look like post-treatment, even before you’ve started. Before we recommend a course of treatment for you, we’ll take impressions of your teeth using the iTero scanner to ensure we are making our recommendation on accurate information.To find out more about the iTero scanner and other orthodontic technology we use here at L&L Orthodontics, book your specialist consultation today.
Reviews
There are no reviews yet.