View cart “Roland DWX-4 Dental Milling Unit For Sale” has been added to your cart.
-40%
Availability: In Stock
3Shape D810 Dental Scanner For Sale
$7,500.00$4,500.00
The wax-up fixture – enables scanning of wax-ups and bits from all angles and sides. The wax-up is suspended in wires that will be invisible in the scan result. Two-cast fixture – enables users to firmly set 2 models, preparation and antagonist, in occlusion so they do not move during scanning. The Two-cast fixture functions like a clamp making it easy to set while holding the models in occlusion.
Other people want this. 15 people have this in their carts right now.
Combining accuracy and speed with Multi-Die scanning capabilities
The 3Shape D810 Dental Scanner takes labs to whole new productivity
levels with high speed scanning, and ultra-efficient batch and
multi-case processing capabilities.With its new and unique Texture Scanning feature plus 5.0 megapixel
cameras,
3Shape’s D810 scanners wield the market’s most advanced 3D
scanning technologies. 3D scanning in connection with designing
implant bridges and bars requires very high accuracy.
series scanners are among the few that can deliver reilable data for
these indications.
Capture complete textures and pencil markings
Implant bridge and bar accuracy
Market’s most extensive suite of scan indications
High productivity with Multi-Die scanning
3shape D810 3D Scanner
Highly Accurate Scanning
Scan time Die: 25 sec (30 sec)
Resolution 2 cameras, 5.0 Mega Pixels
Accuracy Ultra High accuracy: < 15 Microns Texture Scanning technology High detail detection and capture of
hand-drawn markings on model
Multi-Die Scanning Scan batches for single or multi-case processing
The wax-up fixture – enables scanning of wax-ups and bits from all
angles and sides. The wax-up is suspended in wires that will be
invisible in the scan result.
Two-cast fixture – enables users to firmly set 2 models, preparation
and antagonist, in occlusion so they do not move during scanning. The
Two-cast fixture functions like a clamp making it easy to set while
holding the models in occlusion.
3shape D810 3D Scanner The impression fixture – Enables automatic alignment of upper and
lower when scanning triple-tray impressions. The impression is fixed
in a permenant position in the flippable holder. The scanner and
software can recreate the precise upper and lower relationship in the
digital model.
Featrues:
– 2 cameras with reduced angle enable impressions, deep inlays and full undercuts to be scanned effectively.
– The 3-axis motion system allows the dental object to be tilted, rotated and translated, facilitating scanning from any viewpoint enabling scanning of more than 350 degrees of a sphere.
– Scan parameters are automatically adjusted to the object’s material for accurate color capture.
– Automatic scanning with the multi-die plate.
Technical Specifications
– Scan Time (Final 3D Model): Single die: 25 sec (30 sec)
– 3-Unit Bridge: 100 sec (125 sec)
– Resolution: 2 cameras, 5.0 Mega Pixels
– Accuracy: Ultra high: <15 Microns
– Material Color: Material color independent
– Scan Indications: Market’s most extensive range.
– Dimensions (W x H x D): 37 x 29 x 33cm (14? x 11?x 13?)
– Texture Scanning Technology: High detail detection and capture of hand-drawn markings on model
– Multi-Die Scanning: Scan batches for single or multi-case processing
3Shape D500 Dental Lab CAD Scanner, Computer
Reviews (0)
Reviews
There are no reviews yet.
Be the first to review “3Shape D810 Dental Scanner For Sale” Cancel reply
The wax-up fixture – enables scanning of wax-ups and bits from allangles and sides. The wax-up is suspended in wires that will beinvisible in the scan result.Two-cast fixture – enables users to firmly set 2 models, preparationand antagonist, in occlusion so they do not move during scanning. TheTwo-cast fixture functions like a clamp making it easy to set whileholding the models in occlusion.
iRay D3 is one of the most popular products in the world and has been leading the technology since 2004. There are several companies following our concept and make it look similar and sell it cheaper. iRay D3 (DX3000)’s core detail technology and safety features cannot be copied.
SuniRay 2 achieves maximal image quality with superior diagnostic capabilities while maintaining the lowest radiation levels among all digital sensors. The comprehensive and feature-rich Prof. Suni Advanced Imaging Software supplements the SuniRay 2’s high-quality imaging with a wide array of user-friendly customization and image-enhancement tools. With the SuniRay 2, Suni has created a complete digital radiography system that seamlessly integrates with your entire practice.
The industry’s most cost-effective and user-friendly dental mill, the DWX-4 produces single crowns, copings, bridges and hybrid abutments with precision and ease. The DWX-4 is the ideal device for labs just getting into digital milling or labs that need a second device for urgent jobs. With the DWX-4 dental milling system, you can quickly and economically mill on-demand in a wide variety materials, including the latest hybrid ceramics.
iTero HD2.9 simply allows to digitally scan a prepared tooth and wirelessly send this information directly to the dental laboratory for fabrication of a CAD/CAM crown without the gooey mess.
The Identica T300 dramatically improves the fundamental aspects of scanner performance and the latest software technology provides the clearest, sharpest data. Identica T300 is customized to deliver the finest data quality using its dual 2.0 MP cameras. Identica T300 will save valuable time and money by minimizing trial & error when adjusting restoration fits.
Content
3Shape D810 Dental Scanner
Combining accuracy and speed with Multi-Die scanning capabilities
The 3Shape D810 Dental Scanner takes labs to whole new productivity
levels with high speed scanning, and ultra-efficient batch and
multi-case processing capabilities.With its new and unique Texture Scanning feature plus 5.0 megapixel
cameras,3Shape’s D810 scanners wield the market’s most advanced 3D
scanning technologies. 3D scanning in connection with designing
implant bridges and bars requires very high accuracy.
series scanners are among the few that can deliver reilable data for
these indications.Capture complete textures and pencil markings
Implant bridge and bar accuracy
Market’s most extensive suite of scan indications
High productivity with Multi-Die scanning3shape D810 3D Scanner
Highly Accurate Scanning
Scan time Die: 25 sec (30 sec)
Resolution 2 cameras, 5.0 Mega Pixels
Accuracy Ultra High accuracy: < 15 Microns
Texture Scanning technology High detail detection and capture of
hand-drawn markings on model
Multi-Die Scanning Scan batches for single or multi-case processingThe wax-up fixture – enables scanning of wax-ups and bits from all
angles and sides. The wax-up is suspended in wires that will be
invisible in the scan result.
Two-cast fixture – enables users to firmly set 2 models, preparation
and antagonist, in occlusion so they do not move during scanning. The
Two-cast fixture functions like a clamp making it easy to set while
holding the models in occlusion.3shape D810 3D Scanner The impression fixture – Enables automatic alignment of upper and
lower when scanning triple-tray impressions. The impression is fixed
in a permenant position in the flippable holder. The scanner and
software can recreate the precise upper and lower relationship in the
digital model.Featrues:
- 2 cameras with reduced angle enable impressions, deep inlays and full undercuts to be scanned effectively.
- The 3-axis motion system allows the dental object to be tilted, rotated and translated, facilitating scanning from any viewpoint enabling scanning of more than 350 degrees of a sphere.
- Scan parameters are automatically adjusted to the object’s material for accurate color capture.
- Automatic scanning with the multi-die plate.Technical Specifications
- Scan Time (Final 3D Model): Single die: 25 sec (30 sec)
- 3-Unit Bridge: 100 sec (125 sec)
- Resolution: 2 cameras, 5.0 Mega Pixels
- Accuracy: Ultra high: <15 Microns
- Material Color: Material color independent
- Scan Indications: Market’s most extensive range.
- Dimensions (W x H x D): 37 x 29 x 33cm (14? x 11?x 13?)
- Texture Scanning Technology: High detail detection and capture of hand-drawn markings on model
- Multi-Die Scanning: Scan batches for single or multi-case processing
3Shape D500 Dental Lab CAD Scanner, Computer
Dexcowin IRay D3 Dental Handheld X-Ray System
iRay D3 Dental Mobile Handheld X-Ray
Dexcowin invented the iRay D3 more than 10 years ago, in 2004, after several years of R&D. The iRay D3 has some different names for the OEM, but the official product model name is DX3000. We have designed it as a pure handheld portable X-ray. It has many different features for mobile, battery powered, handheld, cordless, digital, and camera types. It is lightweight, durable, stable, easy to use, saleable, and compatible to all radiation detectors, with clear, effective images. However, what we would like to emphasize, and what we are so proud of about the iRay D3 is that it is safe for handheld use. This is because we are concerned about the safety and care of the operators and patients. This is our top priority and responsibility to our customers. We follow all required rules from FDA, GMP, CE and all local health departments from the over 40 countries and states we have registered in. We keep to the safety regulations during manufacturing. Our long term company strategy for iRay D3 is to “Make it safe,” “”Make it better than yesterday,” and “Make it durable.”A summary of iRay D3 features Dexcowin IRay D3 Dental Handheld X-Ray SystemiRay D3 Convenience & Cost effectiveness
You can stay with the patient, and it is especially beneficial for children.
No need to construct separate shielded rooms, so all operation rooms can be X-ray rooms.
Lightweight 4 lbs gives you handy operation and saves time for full mouth X-ray.
More than 200 shots on single charge (1.5 hour). Battery and a spare battery included.iRay D3 compatibility
Applicable and be compatible with all detectors, film, PSP and all kinds of sensors.IRay D3 Mobility
Completely mobile system with a battery and extras.
Compact design and lightweight allows it to be moved anywhere in and out of office.IRay D3 Safety
Designed for handheld, so it does not affect the operator with extremely low leakage radiation.
Rechargeable Lithium polymer battery is very safe and stable with a safety circuit
Battery can be charged separately with a main X-ray body.Other accessories
AllMyT mobile cart for iRay D3 to be mounted on.
A neck strap to balance the weight and preventing dropping.
SuniRay 2 Digital Intraoral Sensor Size 1 and Size 2
X-Ray Imaging Properties
Resolution: The pixel resolution of the high resolution (HiRes) sensors exceeds 15 lp/mm. The standard resolution of an X-Ray image, as measured by the modulation transfer function (MTF) exceeds 12 lp/mm. This is measured by using a standard 60 kV intraoral X-ray source.
Does Efficiency: The sensor will produce a high quality image with an X-Ray dose that is only a fraction of the standard dose required by Dental X-Ray film.
Diagnostic Efficacy: The system will produce a superior image quality of images obtained when using standard dental X-Ray film. This allows the dentist to diagnose standard intraoral pathologies encountered during screening procedures.
Wide dynamic range: The sensor pixel well capacity is very high, allowing a higher accommodation of greyscale (bone density) dynamic range.
Sensor Material Biocompatibility SpecificationsThe sensor’s body material and cable material are biocompatible. The sensors and all component materials have been tested to comply with ISO standards, and specifically, the sensor complies with EN IS0-10993 (Biological Evaluation of Medical Devices).
Technical data
Size 1
Size 2
Sensor Dimensions (mm)
39.5 x 26
43.5 x 31.5
Active Area (mm)
31.1 x 20.2
35.2 x 26.2
Sensor Technology
CMOS APS Fiber Plate
CMOS APS Fiber Plate
Maximum Gray Levels
4096
4096
Sensor Cable
3 feet (1m)
3 feet (1m)
Cable Attachment
Reinforced Strain Relief
Reinforced Strain Relief
USB Module
Integrated USB 2.0 Module
Integrated USB 2.0 Module
Software
Prof. Suni
Prof. Suni
X-Ray Imaging Properties SuniRay 2 Digital Intraoral Sensor Size 1 and Size 2
Resolution: The pixel resolution of the high resolution (HiRes) sensors exceeds 15 lp/mm. The standard resolution of an X-Ray image, as measured by the modulation transfer function (MTF) exceeds 12 lp/mm. This is measured by using a standard 60 kV intraoral X-ray source.
Does Efficiency: The sensor will produce a high quality image with an X-Ray dose that is only a fraction of the standard dose required by Dental X-Ray film.
Diagnostic Efficacy: The system will produce a superior image quality of images obtained when using standard dental X-Ray film. This allows the dentist to diagnose standard intraoral pathologies encountered during screening procedures.
Wide dynamic range: The sensor pixel well capacity is very high, allowing a higher accommodation of greyscale (bone density) dynamic range.
Digital dental technologies are transforming every aspect of the dental industry, making it easier than ever to produce precise crowns, copings and bridges. The latest technological advancements in scanning, CAD/CAM software and CNC milling allow digital dental labs to deliver custom production with speed and precision and enjoy optimal accuracy and repeatability.The industry’s most user-friendly desktop milling solution, the Roland DWX-4 compact dental mill, is at the forefront of this technological revolution. With the DWX-4, you can mill a single crown or small bridge quickly and economically. Affordably priced, the DWX-4 is ideal for any lab just getting started in digital dentistry or those labs with scanners who no longer wish to outsource production. It’s also the perfect addition to labs that need a second device for urgent jobs. With the DWX-4, these labs can mill a single crown or bridge on demand, without tying up their larger production mills.This affordable, precise 4-axis desktop mill is an ideal choice for labs just getting started in digital dentistry or for those that want to perform smaller, time-urgent jobs (like a single crown or small bridge) without tying up their larger production mills.
Features and Benefits:Roland DWX-4 Dental Milling Unit
Compact design is ideally suited for all lab environments
Air blower to aid with difficult-to-mill materials
Negative ion generator for neutralizing static electricity
Multicast capability for connecting up to four DWX dental mills to one computer
Color-coded LED light signals machine status
Automatic calibration
E-mail notification system
Dust collection system with airflow sensor
Virtual panel ensures easy operation
G-code compatible
Compatible with industry-standard software
Open architecture for easy integration into a complete production solution
CAM software included
The industry’s most cost-effective and user-friendly dental mill, the DWX-4 produces single crowns, copings, bridges and hybrid abutments with precision and ease. The DWX-4 is the ideal device for labs just getting into digital milling or labs that need a second device for urgent jobs. With the DWX-4 dental milling system, you can quickly and economically mill on-demand in a wide variety materials, including the latest hybrid ceramics.
iTero HD2.9 simply allows to digitally scan a prepared tooth and wirelessly send this information directly to the dental laboratory for fabrication of a CAD/CAM crown – without the gooey mess. The wireless transmission saves shipping time and eliminates distortion that can often be found with traditional stone modelsThe digital scan is, quite literally, digitally perfect. We then deliver the digital scan to our lab where a precision fitting restoration is created.iTero HD2.9 system eliminated the uncomfortable patient experience of traditional impressions, utilizes advanced state of the art digital technology, and provides with superior fitting restorations with little or no adjustmentsiTero Intra-Oral Scanner
Model: HD2.9
2014 Date of Mfg.
Brochure/Video: Click Here
Limited Use
Includes:
iTero Software (pre-loaded)
90 Day Parts Warranty
User Manual(s)
Free Standard Shipping (Commercial USA Addresses)
Its ergonomic design comes with safe docking station. It has thin fiber optic cable which enables quick data transfer from the wand to the cart. This optimized cable length assists various cart positions in the operatory.Orthodontic treatment is more than just straightening teeth; it’s about ensuring your teeth and jaws are in alignment. To achieve this, we need to get an accurate look at where your teeth are positioned. To do this, we use the iTero Intraoral digital scanner.A good impressionIn the orthodontic and dental industries, ‘impressions’ is the term we use for getting a good picture of where your teeth currently sit. These impressions were previously taken using a type of dental cement. Pasted on your teeth, patients were required to lie for a few minutes while the cement-like material set. The dental professional could then remove the set material which had formed an ‘impression’ of your teeth.This process was messy, rather unpleasant and not very comfortable. Fortunately, that method is a thing of the past. These days, we use scanning technology and at L&L Orthodontics, our technology of choice is the iTero Intraoral digital scanner.
What is the iTero scanner?
The iTero scanner is new 3D orthodontic scanning technology. Using the latest developments in intraoral scanning, the iTero scanner accurately scans your teeth as part of your orthodontic assessment. The iTero scanner is made up of a small, wand-like device which is used to scan your teeth and jaws. The data it is collecting then appears on the computer screen, allowing you to see the ‘impressions’ the scanner is taking.The iTero scanner works in with Invisalign®* treatment and lets you see what your teeth will look like post-treatment, even before you’ve started. Before we recommend a course of treatment for you, we’ll take impressions of your teeth using the iTero scanner to ensure we are making our recommendation on accurate information.To find out more about the iTero scanner and other orthodontic technology we use here at L&L Orthodontics, book your specialist consultation today.
Medit Identica T300 Dental 3D Scanner
Identica T300 to meet all of your needs. With powerful scan engine and affordable pricing, the new Identica T300 is a perfect fit for both performance enthusiasts and entry level users. Its evolutionary design and high tech features will help your lab rediscover productivity. Bundled colLab 2017 scan software makes scan data processing easy and efficient.Quality & affordability
2.0 MP cameras, Blue LED
Accuracy : 7 μm (ISO)
Full arch scan time 24 sec
2-Axis Manual
Identica T300 dramatically improves the most important aspects of scanner performance. The latest software technology provides you with the cleanest and sharpest data. T300 is specially designed to bring out the finest data quality using its 2.0 MP cameras. T300 will save your precious time and money by minimizing trial & error to adjust restoration fits.Identica T300 is an upgrade version of Identica Blue, provided at lowest pricing. Giving better value for the affordable scanner users. Identica T300 has enhanced data quality compared to Identica Blue.
Introducing the Next Generation of 3D Dental Scanners: Our T-Series
Medit represents the apex in 3D dental scanning. With unsurpassed speed, accuracy, and reliability, Medit helps you rediscover your productivity. The T-Series’ new powerful scan engine and affordable pricing are the perfect fit for performance enthusiasts and entry-level users, helping your lab rediscovering productivity thanks to its convenient design and high-tech features.
Medit T300 is the latest Medit scanner with an enhanced SW scan. It uses Blue Light technology, which enables quick scanning and provides excellent precision (7μm).The program is user-friendly, because it takes you through simple and fast individual steps, from inserting the model into the scanner to exporting the file to the CAD design program.FEATURES:Medit Identica T300 Dental 3D Scanner
Scanned printing: 2 manual axes.
Touch sensor: no.
Full arcade scan speed: 24 ´´
Resolution of the camera: 2 x 2 MP camera.
Scan volume: 90 x 72 x 60 mm.
Scanning principle: Optical change phase.
Dimensions: 290 x 290 x 340 mm.
Weight: 12Kg.
Light source: Blue LED.
Connectivity: Type USB 3.0 B.
Power: 100- 240 vac, 50-60 HZ.
Warranty: 2 years.
ADVANCED DATA PROCESSING AND HIGHER RESOLUTION DUAL CAMERAS
The Identica T300 dramatically improves the fundamental aspects of scanner performance and the latest software technology provides the clearest, sharpest data. Identica T300 is customized to deliver the finest data quality using its dual 2.0 MP cameras. Identica T300 will save valuable time and money by minimizing trial & error when adjusting restoration fits.
Reviews
There are no reviews yet.