| Description | For women’s health.
Perform minimally invasive, non-hormonal, energy-based gynecological health treatments – in your office, in as little as 10 minutes.Minimize physician fatigue with articulated arm and featherweight handpieces
Gynecology-specific selection of handpieces and lenses
Intuitive touch-screen interface stores and recalls user preferences
Precision internal scanner digitally synchronized with laser pulse generator
Compact, quiet, easily mobile, and portable | Wavelength:Microwave Energy
Energy Settings:A range of energy settings
Cooling:Hydro-ceramic cooling system to protect dermis
Vacuum:Vacuum to stabilize tissue
Software:Easy to use, custom software that guides procedure | 2017 InMode Aesthetics InMode Contoura Cellulite Reduction System – with 3 Handpieces; Manufactured on 03/22/2017; Excellent Operating & Cosmetic Condition, Single Owner, Used for approximately 60+ Hours; SW Version: 2.31CTR; Reason for Selling: Downsizing; Handpieces Included: BodyFX, MiniFX, & Forma Plus; Also Includes: Footswitch. | Includes:
Footswitch
Operators Manual
AntiFreeze Coolant
Patient & Operator Eyewear | Includes:
1x Fractional Scanner Handpiece
4x Brand New 120 Tips
2x Brand New 300 Tip
1x 1000 Tip
Footswitch
2 Keys
Operator Manual
1 Operator Eyewear
1 Patient Eyewear | Laser Hair Removal
Details:- Serial Number: SQEAY-19M-XXXXX (message for serial number)
- System Total Shot Count: 560,693
- Alex Shot Count: 221,437
- YAG Shot Count: 339,256
Includes:- Handpiece and Delivery System
- Square Spot Sizes: 2x2mm, 3x3mm, 5x5mm, 10x10mm, 14x14mm, 18x18mm, 20x20mm, 24x24, 27x27mm
- Fiber Pole
- Foot Switch
- System Key
- Operators Manual
- 30 Day Parts and Labor Warranty
|
| Content | Syneron Candela CO2RE Intima Laser
Laser Type:CO2
Wavelength:10,600nm
Laser Emission Mode:Pulsed
Output Power:60 watts (maximum peak)
Laser Beam Energy:Variable from 1 – 90 mJ
Pulse Repetition Rate:Up to 16.7 kHz
Pulse Duration:20 – 3000 usec
Power Stability:± 1.5 watts (±5%)
Mode Quality:(M²) < 1.2
Beam Size:Ø 1.8 ± 0.5 mm
Beam Divergence:7.5 ± 0.5 mrad (full angle)
Polarization:> 100:1 linear (orthogonal to mounting pads)
Maximum Scan Area:10 mm diameter
Aiming Laser:5 mW, 650 nm (red) diode laser
Articulated Arm:Lightweight, aluminum fiber, 7-joint, pneumatically balanced
Treatment radius at full arm extension:85 cm (33.5″)
Horizontal rotation:360°
Lens Assemblies:150 um spot size, 120 um spot size:(optional)
Handpiece:Multi-use Aesthetic or surgical hand piece
User Interface:10.4″ high-resolution
Laser Emission Control:Footswitch
Laser Emission Indicators:Solid amber LED in Standby and Ready modes
Flashing:red LED during laser emission
Electrical Requirements:100 – 240 VAC self-sensing, 50/60 Hz, 7.1 A, single phase
Dimensions:40 cm x 44 cm x 177 cm, (15.75″ x 17.3″ x 70″)
Weight:26 kg (58 lbs)
Operating Modes
Mode:[ Energy Settings ] [ Fractional Coverage ] [ Estimated Ablation Depth ]
CO2RE Light:[18 – 74.5 mJ] [30 – 50%] [20 – 40 um]
CO2RE Mid:[45 – 257 mJ] [20 – 40%] [100 – 200 um]
CO2RE Deep:[30 – 70 mJ] [1 – 5%] [500 – 750 um]
CO2RE Fusion:[45 – 128 mJ, 30 – 70 mJ] [20 – 40%] [100 – 200 μm & 500 – 750 um]
Classic Resurfacing:[1 – 10 mJ] [Full] [100 – 200 um]
Dermal Excision:[5 – 40 mJ] [N/A] [0.2 mm x selected line 0.2 mm freehand]First fully integrated CO2 laser, worldwide.
Designed to adapt to your patients needs, with 100+ indications.What CO2RE Is For100+ indications cleared in 10 medical specialties, including dermatology, plastic surgery, and gynecology.Imagine having one system designed for numerous procedures that require excision, incision, ablation, coagulation, and resurfacing of soft tissue. Its here. With the CO2RE system, you can precisely target and efficiently treat the skin with control.Treat multiple skin layers in one pass
Perform full and fractional resurfacing
Enhance coagulation
Encourage neocollagenisIndustry-first internal scanner optimized for numerous individualized treatment applicationsKey Benefits of the CO2RE System
Give your patients positive experiences and outcomes.
CO2RE treatments are fast and require limited downtime.The system delivers proven, predictable, visible results across indications1-4, including:Enhancing skin tone and texture through skin resurfacingReducing the effects of the sun and aging on the skinSmoothing out fine lines, wrinkles, and surgical and acne scarsGain unparalleled treatment flexibility that can help your practice grow.
Designed from the inside out to be a comprehensive work station:
CO2RE Aesthetics for skin resurfacing, from superficial to deep skin treatments, including several options and combinations tailored for your patients needs.
CO2RE Surgical for a true, continuous wave with efficient skin coagulation after the surgical cut.
CO2RE® Intima for gynecology applications, enabling you to broaden your portfolio offering.CO2RE Product FeaturesLightLight Peel
20-40 µm
Level with Stratum ComeumMidEpidermal and dermal resurfacing
Coagulation
100-200 µm
Improve skin tone and texture
Complexion refresherDeepDeep fractional resurfacing
Deeper level coagulation
500-700 µm
Improve scars, fine lines and wrinklesFusion Syneron Candela CO2RE Intima LaserCombination of superficial and deep fractional resurfacing
Superficial texture variations
Fine lines and wrinklesWhat CO2RE Intima is For
The CO2RE® Intima system is uniquely engineered to transform treatment of many dermatological conditions, including gynecological needs.
The CO2RE Intimas comprehensive range of treatment options1 include:Using well-established CO2 technology, you can now perform minimally invasive, non-hormonal, energy-based treatments of the introitus, vaginal canal, and external genitalia in your office, in as little as 10 minutes for each treatment.Ablation and resurfacing of soft tissue
Scar tissue (e.g. C-section scar)
Conization of the cervix such as vulvar and vaginal intraepithelial neoplasia (VIN, VAIN)
Leukoplakia (vulvar dystrophies)
Condyloma acuminateThe systems customized handpieces are designed to treat the introitus, vaginal canal, and external genitalia.
Conveniently treat with pre-set or individualized treatment options
Accurately target and treat tissue with ergonomic, pen-like precision2
With 360o rotation capability for ease of use on tissue along the vaginal canal, and sterile for every patient, the single-use handpieces are guaranteed ready to use.Significant benefits for your practice and patients.
Efficient procedural time as little as 10 minutes for each treatment
Minimally invasive, non-hormonal, energy-based treatment
Portable system allows you to easily perform office-based procedures, and is easy to move from room to room
Simple in-office setup for gynecological applications
Single-use handpiece optimizes workflow, enhancing patient safety
Financial savings single-use handpieces reduce staff time, administrative costs, and inefficienciesDesigned with your practice in mind.
The CO2RE Intima system offers numerous user-friendly, productivity-enhancing features.Minimize physician fatigue with articulated arm and featherweight handpieces
Gynecology-specific selection of handpieces and lenses
Intuitive touch-screen interface stores and recalls user preferences
Precision internal scanner digitally synchronized with laser pulse generator
Compact, quiet, easily mobile, and portableWell-established CO2 technology treats skin or soft tissue.
CO2 technology has been used in gynecology for benign and pre-malignant vulvar and cervical dysplasia since 1973.The CO2RE system offers customizable treatment capability with handpiece and lens combinations to provide physician control. Compared to traditional surgical methods, it provides greater precision, cleaner incision, and less scarring. | Miramar Labs MiraDry Sweat Reducer
Miramar Labs MiraDry Sweat Reducer specification
– Wavelength:Microwave Energy
– Energy Settings:A range of energy settings
– Cooling:Hydro-ceramic cooling system to protect dermis
– Vacuum:Vacuum to stabilize tissue
– Software:Easy to use, custom software that guides procedureHow it works
miraDry is a safe, clinically proven, FDA-cleared solution for significantly reducing underarm sweat. Its an outpatient procedure performed in your physicians office, and it doesnt involve any surgical incisions or cuts. miraDry works by delivering precisely controlled electromagnetic energy to the underarm area, eliminating the underarm sweat glands.miraDry is the only FDA-cleared procedure that provides a lasting reduction of underarm sweat in a completely non-invasive way. Other treatment options, including antiperspirants and toxins, aim to temporarily disable the sweat glands for varying lengths of time requiring repeat treatments to maintain effectiveness. Other options involve surgery, which poses inherent risks.Results
The miraDry system eliminates the underarm sweat glands, and the sweat glands dont grow back after treatment.This results in a dramatic and lasting reduction of underarm sweat. In a clinical study, patients experienced an average of 82% reduction in underarm sweat.Indicated Uses:
The miradry System is indicated for use in the treatment of primary axillary hyperhidrosis.
The miraDry System is a Microwave device designed to heat tissue located at
the dermal- hypodermal interface where the sweat glands reside using a surface contact applicator. The miraDry System consists of: the DTS3000 Console; the miraDry Handpiece; and a disposable, sterile miraDry bioTip that snaps onto the Handpiece to provide a sterile protective cover.The DTS3000 Console is a software-driven device which contains circuit
boards, a microwave generator, integrated vacuum and cooling systems, and
an integrated touch-screen user interface.The non-invasive miraDry Handpiece is specifically designed to deliver microwave energy to the skin at specified frequency and power levels. The proximal end of the Handpiece has a cable bundle and console connector that supplies the energy and cooling to the Handpiece. The distal end has a sterile, disposable barrier, the miraDry bioTip, that contacts the patient. | 2017 InMode Aesthetics Contoura Cellulite Reduction System BodyFX
Vacuum:300 – 500 mBar
RF Output Frequency:Up to 50 W
Output Frequency:1 MHz
Temperature Cut-Off:Real time temperature monitoring and cut off operator selectable to 43°C
MINIFX – Only Available on Newest Generation Contoura’s
Chamber Size:1 inch x 1 inch
RF Output Frequency:Up to 50 W
Output Frequency:1 MHz
Negative Pressure:Up to 500 mBar
Temperature Cut-Off:Real time temperature monitoring and cut-off. Operator selectable up to 43°C
PLUS
RF Output Frequency: Up to 65 W
Output Frequency: 1 MHz
Temperature Cut-Off: Real time temperature measurements set by operator up to 43°C FULL BODY CONTOURING EXPERIENCE
Contoura is the reshaping solution to maximize patient results. WORKSTATIONS
Body contouring is one of the most in-demand aesthetic treatments. In many cases, patients are looking for improvements in body shape without surgical intervention 1. Contoura is a non-invasive body contouring solution that provides treatments that can be done during a lunchtime break.Contoura addresses: Body Reshaping, Cellulite Reduction and Skin Contraction. The Contoura is the ONLY non-invasive body contouring device proven in peer reviewed and published human studies to both permanently kill adipose tissue and contract the skin.PRACTICE BENEFITS 2017 InMode Aesthetics Contoura Cellulite Reduction System
Unlike other body contouring devices (which may carry high per procedure cost), Contoura has zero consumable costs or pulse counters. 4
Contoura is a business solution that allows you to grow your patient base without having to worry about ongoing fees.The use of radio frequency allows owners to provide both skin contraction and fat treatments, of all body areas, in one device. 5 This provides multiple revenue streams to a practices bottom line. This provides multiple revenue streams to a practices bottom line.1. According to the ASAPS 2017 statistical report, non-surgical fat reduction was listed as the third most performed procedure in 2017, after Botox and fillers. Source
2. Treatments take anywhere between 20-60 minutes. A series of 6-8 treatments is recommended.
3. Peer Reviewed Source
4. BodyFX is clinically proven to contract skin and reduce fat. BODYFX
The first and only non-invasive body contouring technology proven in peer reviewed and published human studies to both permanently kill adipose tissue and contract the skin. HOW DOES IT WORK
BodyFX is the first and only non-invasive body contouring and cellulite technology proven in peer reviewed and published human studies to both permanently kill adipose tissue and contract the skin *. BodyFX addresses problematic fatty tissue in larger body areas such as the abdomen, back (flanks), and thighs. BodyFX works by using different clinically proven modalities including radio-frequency energy and negative pressure applied to the skin and underlying fat. BODYFX Benefits
Acquire. Control. Extend. Technology to safely optimize peak energy.
Pre-heating of tissue reduces threshold for selective apoptosis of fat cells.
Sophisticated tissue temperature and impedance monitoring achieves and maintains optimal temperature end points to prevent atrophic damage.
Active temperature monitoring and control with cut-offs for unprecedented safety, virtually eliminating risk of thermal injury.MINIFX – Only Available on Newest Generation Contoura’s
A new, non-invasive solution to reduce the unsightly appearance of cellulite in smaller areas like the arm, neck and knees. HOW DOES IT WORK
MiniFX is a non-invasive contouring and cellulite technology that delivers a combination of clinically proven modalities, similar to the BodyFX, however, addresses problematic fatty tissue in smaller areas like the neck , arms, and knees. MINIFX BENEFITS
Acquire. Control. Extend. Technology to safely optimize peak energy.
Pre-heating of tissue reduces threshold for selective apoptosis of fat cells.
Sophisticated tissue temperature and impedance monitoring achieves and maintains optimal temperature end points to prevent atrophic damage.
Active temperature monitoring and control with cut-offs for unprecedented safety virtually eliminating risk of thermal injury. PLUS
Stimulates the formation of new collagen and improves the skin’s elasticity for long-lasting and remarkable results. HOW DOES IT WORK
Plus is a non-invasive sub-dermal heating applicator that stimulates sub-cutaneous tissue. Radio-frequency energy flows uniformly between the electrodes to provide a comfortable thermal experience, built-in temperature controls allow for the attainment of clinically proven optimal temperatures without concerns of hot spots or under treatment. PLUS Benefits
Acquire: Forma has a temperature sensor built into the hand piece which reads skin surface temperature 1000 times per second, allowing clinicians to acquire skin temperature in real time.
Control: Software algorithm allows unprecedented safety of RF delivery. The cut off temperature” feature reduces RF energy automatically when the hand piece senses that the required skin temperature has been reached.
Extend: Clinical evidence suggests prolonged exposure to temperature above 40°C is advantageous for optimal clinical outcomes. Only InMode’s A.C.E. technology allows you to utilize therapeutic temperatures safely and efficiently. | ACTIVE OPTICAL EXTRA 818 IPL HAIR REMOVAL MACHINEIncludes:
Footswitch
Operators Manual
AntiFreeze Coolant
Patient & Operator EyewearHandpieces:Hair Removal Handpiece and Facial Handpiece
Chilled Tip:Up to 4c
Pulse Interval:0.5~2 Seconds
Output Power:11-31 joule/cm2, upto 4,000W
Cooling System:Revolutionary dual cooling
Control:Intuitive touch screen control
Lamp’s Life Span:250,000 Flashes (Universal), 200,000 Flashes (Facial)
Treatment Area:7.5 cm2 (15*50mm) Universal, 4.5 cm2 (15*30mm) Facial
Wavelength:420-1100 nm
Weight:42Kg (including Stand, if device is not a table top)
Dimensions:44cm x 45cm x 100cm
Extra-818
Skin Rejuvenation
Pigmentation Treatment
Acne Treatment
Hair Removal
Vascular (Facial) TreatmentThe combination of tested treatment protocols with high end engineering makes the Extra – 818 the perfect device for leading clinics.Revolutionary Cooling System
The Extra – 818 has a dual cooling system, controlled and monitored in order to ensure long lifetime to the lamp and a comfortable treatment to the patient.Competitive cooling systems “freeze” the skin so that during the treatment the skin temperature will rise to a bearable level. However, this “freezing” temperature might limit the results because the follicles will not reach the coagulation temperature. To ensure optimal results Active installed a special Processor that prevents overcooling the skin and maintains a uniform low temperature of the “glass” throughout the treatment. This revolutionary system enables the Extra – 818 to provide best results with optimal patient comfort.Research Program ACTIVE OPTICAL EXTRA 818 IPL HAIR REMOVAL MACHINE
For clinical investigations, the self setting program allows researchers to set the treatment’s parameters according to their needs. Allowing advanced research with the device.
The energy levels in the self setting program can reach 31Jcm2 with high intensity of 4,000W.The Active Optical Extra 818 IPL Hair Removal and Skin Rejuvenation is the outcome of more than a decade of treatments and thousands of devices operated worldwide. It contains It contains unique features:
* Contemporary touch screen control
* Built-in Patch Test procedure for examining the optimal energy level
* A stunning number of 450,000 flashes in both lamps.The Extra – 818, based on Active’s GEM-PL technology, sets sets a specific Pulse Pattern according to the selected treatment type, skin color, skin photosensitivity and treatment depth.
The treatment protocols and different pulse patterns take into account the tissue’s TRT (Thermal Relaxation Time) and the combined knowledge accumulated from thousands of treatments done during the years and clinical investigations done to confirm the findings. | LUTRONIC ECO2 – ABLATIVE CO2 FRACTIONAL LASERLaser Type:Ablative Fractional Resurfacing (AFR)
Beam Delivery Method:Articulated Arm with Scanner or Convetional Handpiece
Medium & Method of Generation:Seall Off CO2 RF Mudule Laser
Wavelength:10,600 nm
CO2 RF Module Maximum Power: Maximum 30 Watt at Continuous Wave
Fractional Scanner Handpiece:
User Mode:Static (Stamping) / Dynamic (Air Brushing)
Tip:120, 300, 1000 um Spot Sizes
Pulse Energy:2 mJ – 240 mJ
Pulse Rate:10Hz to 200 Hz
Density:25 – 400 Spots / cm2
Scan Area:Max.14 x 14 mm
Scan Shapes:Square, Rectangle, Oval, Triangle, Point Beam
Normal Handpiece:
User Mode:Char Free (Ultra Pulse) / Super Pulse / CW
Pulse Rate:Char Free (Ultra Pulse) – 1 Hz to 700 Hz; Super Pulse – 1 Hz – 550 Hz
Pulse Width:Char Free (Ultra Pulse) – 40 us to 1000 us; Super Pulse – 1 ms – 5 ms
CW:ON Time – Cont. 0.01 s – 1.0 s
CW:OFF Time – SINGLE 0.001 s – 1.0 s
Adjustable Spot Size:0.2 – 1.0 mm
User Interface:Touch Screen with Flash Technology 7 inch LCD Screen
Dimensions EXCLUDES ARM: 360 mm (W) x 450 mm (L) x 1000 mm (H)
Dimensions WITH ARM: 360 mm (W) x 450 mm (L) x 1870 mm (H)
Weight:77 lbs. (35 kg)
Cooling:Air Cooling
Transform Your Practice with the Robust eCO2
Lutronics eCO2 is the premier fractional ablative laser that delivers the full spectrum of resurfacing treatments to your busy practice. You will appreciate how easy to use and reliable the system is while your patients rave about their outcomes.Includes:
1x Fractional Scanner Handpiece
4x Brand New 120 Tips
2x Brand New 300 Tip
1x 1000 Tip
Footswitch
2 Keys
Operator Manual
1 Operator Eyewear
1 Patient EyewearMINIMAL DOWNTIME & LESS DISCOMFORT
– Skin Tightening
– Wrinkles, Rhytids & Fine Lines
– Pigmented Lesions & Lentigines
– Scars
– Textural Irregularities
– Transepidermal Drug Delivery
– Dyschromia
– Solar/Actinic Elastosis
– Syringoma
– Vaporization, Incision & Excision CapabilitiesMINIMAL DOWNTIME, IMPROVED PATIENT COMFORT, INCREASED SAFETYThe Lutronic eCo2 – Ablative Co2 Fractional Laser features the patented Controlled Chaos Technology (CCT), an algorithm to pseudo-randomly deliver each micro laser beam and by placing maximum distance between sequential beams the system eliminates cross thermal diffusion between adjacent Micro-ablative Columns (MACs).This allows the tissue to maximize heat dissipation between shots. The result is an increased safety profile with a reduction in post-operative discomfort and faster healing time leading to unparalleled fractionalCCT reduces thermal damage by maximizing distance between laser micro-beamsQUICK-CHANGE TIPS WITH AUTO-RECOGNITIONFrom ultra-deep to superficial ablation, the eCO2 has the features you need to address a broad range of clinical conditions. The ultra-fast quick change tips come in a choice of three spot sizes, 120, 300 and 500 um, allowing you on-the-fly customized treatments. The eCO2s tip auto-recognition feature automatically changes treatment settings to adjust for the change in spot size. Combined together, the advanced technology, quick-change tips and safety features ensure the ultimate control for the best outcomes.WHY eCO2
Patients are attracted to low risk, minimal downtime treatments
Controlled Chaos Technology creates pseudo-random microwound patterns to minimize heat build-up, minimize downtime, increase safety and maximize patient comfort | 2019 Lumenis Splendor X- Laser Hair Removal
Lumenis Splendor X Laser Hair RemovalThe Alexandrite wavelength at 755 nm, which is ideal for treating skin tones 1, 2 and 3 (fair and light skin tones). It is highly absorbed in melanin and is therefore not safe for use on darker skin tones.
The Nd:YAG wavelength at 1064 nm, which is ideal for treating skin tones 4, 5 and 6 (4 being tanned skin and 5 and 6 darker skin tones) as the absorption by melanin is much lower than with the Alexandrite wavelengthThe Lumenis Splendor X has been introduced to be a player in the solid state Nd:YAG and Alexandrite laser hair removal market. The gold standard for hair removal has always been considered Alexandrite 755nm for light skins and Nd:YAG 1064nm for dark skins.The Lumenis Splendor X combines both in a unique way with blended emission.Instead of firing a single wavelength at a time the Splendor X allows you to fire both wavelengths simultaneous in adjustable amounts to suit the skin type and hair types. This means you are target multiple chromophores at any given time given enhanced results across the board.The Lumenis Splendor X also allows the user to choose between square and round spot sizes with large spot sizesLumenis Splendor X Laser Hair RemovalThe Alexandrite wavelength at 755 nm, which is ideal for treating skin tones 1, 2 and 3 (fair and light skin tones). It is highly absorbed in melanin and is therefore not safe for use on darker skin tones.
The Nd:YAG wavelength at 1064 nm, which is ideal for treating skin tones 4, 5 and 6 (4 being tanned skin and 5 and 6 darker skin tones) as the absorption by melanin is much lower than with the Alexandrite wavelengthLaser Hair Removal
Details:2019 Lumenis Splendor X- Laser Hair Removal- Serial Number: SQEAY-19M-XXXXX (message for serial number)
- System Total Shot Count: 560,693
- Alex Shot Count: 221,437
- YAG Shot Count: 339,256
- Handpiece and Delivery System
- Square Spot Sizes: 2x2mm, 3x3mm, 5x5mm, 10x10mm, 14x14mm, 18x18mm, 20x20mm, 24x24, 27x27mm
- Fiber Pole
- Foot Switch
- System Key
- Operators Manual
- 30 Day Parts and Labor Warranty
|
Reviews
There are no reviews yet.