PERKASA MEDICAL

Free shipping worldwide. Orders over $200
Availability: In Stock

SuniRay 2 Digital Intraoral Sensor Size 1 and Size 2 For Sale

$2,800.00

SuniRay 2 achieves maximal image quality with superior diagnostic capabilities while maintaining the lowest radiation levels among all digital sensors. The comprehensive and feature-rich Prof. Suni Advanced Imaging Software supplements the SuniRay 2’s high-quality imaging with a wide array of user-friendly customization and image-enhancement tools. With the SuniRay 2, Suni has created a complete digital radiography system that seamlessly integrates with your entire practice.

Other people want this. 15 people have this in their carts right now.

Description

SuniRay 2 Digital Intraoral Sensor Size 1 and Size 2

X-Ray Imaging Properties

  • Resolution: The pixel resolution of the high resolution (HiRes) sensors exceeds 15 lp/mm. The standard resolution of an X-Ray image, as measured by the modulation transfer function (MTF) exceeds 12 lp/mm. This is measured by using a standard 60 kV intraoral X-ray source.
  • Does Efficiency: The sensor will produce a high quality image with an X-Ray dose that is only a fraction of the standard dose required by Dental X-Ray film.
  • Diagnostic Efficacy: The system will produce a superior image quality of images obtained when using standard dental X-Ray film. This allows the dentist to diagnose standard intraoral pathologies encountered during screening procedures.
  • Wide dynamic range: The sensor pixel well capacity is very high, allowing a higher accommodation of greyscale (bone density) dynamic range.

Sensor Material Biocompatibility Specifications

The sensor’s body material and cable material are biocompatible. The sensors and all component materials have been tested to comply with ISO standards, and specifically, the sensor complies with EN IS0-10993 (Biological Evaluation of Medical Devices).

 

Technical dataSize 1Size 2
Sensor Dimensions (mm)39.5 x 2643.5 x 31.5
Active Area (mm)31.1 x 20.235.2 x 26.2
Sensor TechnologyCMOS APS Fiber PlateCMOS APS Fiber Plate
Maximum Gray Levels40964096
Sensor Cable3 feet (1m)3 feet (1m)
Cable AttachmentReinforced Strain ReliefReinforced Strain Relief
USB ModuleIntegrated USB 2.0 ModuleIntegrated USB 2.0 Module
SoftwareProf. SuniProf. Suni

X-Ray Imaging Properties SuniRay 2 Digital Intraoral Sensor Size 1 and Size 2

  • Resolution: The pixel resolution of the high resolution (HiRes) sensors exceeds 15 lp/mm. The standard resolution of an X-Ray image, as measured by the modulation transfer function (MTF) exceeds 12 lp/mm. This is measured by using a standard 60 kV intraoral X-ray source.
  • Does Efficiency: The sensor will produce a high quality image with an X-Ray dose that is only a fraction of the standard dose required by Dental X-Ray film.
  • Diagnostic Efficacy: The system will produce a superior image quality of images obtained when using standard dental X-Ray film. This allows the dentist to diagnose standard intraoral pathologies encountered during screening procedures.
  • Wide dynamic range: The sensor pixel well capacity is very high, allowing a higher accommodation of greyscale (bone density) dynamic range.

Reviews

There are no reviews yet.

Be the first to review “SuniRay 2 Digital Intraoral Sensor Size 1 and Size 2 For Sale”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsSuniRay 2 Digital Intraoral Sensor Size 1 and Size 2 For Sale removeRoland DWX-52DC Dental Milling Unit For Sale removeDexis Intraoral Digital Dental X-Ray Sensor For Sale removeDexis Intraoral Digital Dental X-Ray Sensor removeRoland DWX-4W Dental Milling Unit For Sale removeRoland DWX-4 Dental Milling Unit For Sale remove
NameSuniRay 2 Digital Intraoral Sensor Size 1 and Size 2 For Sale removeRoland DWX-52DC Dental Milling Unit For Sale removeDexis Intraoral Digital Dental X-Ray Sensor For Sale removeDexis Intraoral Digital Dental X-Ray Sensor removeRoland DWX-4W Dental Milling Unit For Sale removeRoland DWX-4 Dental Milling Unit For Sale remove
Image
SKU
Rating
Price $2,800.00 $7,800.00 $2,250.00 $2,750.00 $6,500.00 $5,200.00
Stock
Availability
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionSuniRay 2 achieves maximal image quality with superior diagnostic capabilities while maintaining the lowest radiation levels among all digital sensors. The comprehensive and feature-rich Prof. Suni Advanced Imaging Software supplements the SuniRay 2’s high-quality imaging with a wide array of user-friendly customization and image-enhancement tools. With the SuniRay 2, Suni has created a complete digital radiography system that seamlessly integrates with your entire practice.The ultimate in ease, material flexibility and unattended production, the DWX-52DC dental milling machine is designed to greatly expand your lab production and profit. Featuring a 6-slot Automatic Disc Changer, 15-station Automatic Tool Changer and other automated features, it gives users of all skill levels an exceptionally powerful, efficient and affordable dental restoration solution.The DEXIS Digital X-ray System includes a highend CCD sensor, portable PC card and DEXusb connection options, DEXIS imaging software, a complete set of sensor holders and accessories, on-site training, a printed instruction manual, training tutorials on CD, a quick reference guide for the operatory, and 1 year of DEXcare support.Image Quality According to DEXIS, their digital xray system provides detailed image quality and includes image enhancement tools that increase diagnostic capabilities. When the 9 evaluators were asked to rate the system’s image quality and enhancement aids, 89% rated them as excellent to very good. One of the evaluators commented that the system’s “ClearVu and image magnification allow us to diagnose very effectively.”Overall Satisfaction When asked to rate their overall satisfaction with the DEXIS Digital X-ray System, 89% of the evaluators rated it as excellent to very good. Commented one evaluator, “DEXIS has been very responsive to our needs.”The DWX-4W goes beyond dry milling and is the epitome of wet grinding technology. It uses 4-axis simultaneous movements to wet grind precision inlays, onlays, crowns, veneers and short-span bridges from glass ceramic and composite resins.The industry’s most cost-effective and user-friendly dental mill, the DWX-4 produces single crowns, copings, bridges and hybrid abutments with precision and ease. The DWX-4 is the ideal device for labs just getting into digital milling or labs that need a second device for urgent jobs. With the DWX-4 dental milling system, you can quickly and economically mill on-demand in a wide variety materials, including the latest hybrid ceramics.
Content

SuniRay 2 Digital Intraoral Sensor Size 1 and Size 2

X-Ray Imaging Properties
  • Resolution: The pixel resolution of the high resolution (HiRes) sensors exceeds 15 lp/mm. The standard resolution of an X-Ray image, as measured by the modulation transfer function (MTF) exceeds 12 lp/mm. This is measured by using a standard 60 kV intraoral X-ray source.
  • Does Efficiency: The sensor will produce a high quality image with an X-Ray dose that is only a fraction of the standard dose required by Dental X-Ray film.
  • Diagnostic Efficacy: The system will produce a superior image quality of images obtained when using standard dental X-Ray film. This allows the dentist to diagnose standard intraoral pathologies encountered during screening procedures.
  • Wide dynamic range: The sensor pixel well capacity is very high, allowing a higher accommodation of greyscale (bone density) dynamic range.
Sensor Material Biocompatibility SpecificationsThe sensor’s body material and cable material are biocompatible. The sensors and all component materials have been tested to comply with ISO standards, and specifically, the sensor complies with EN IS0-10993 (Biological Evaluation of Medical Devices). 
Technical dataSize 1Size 2
Sensor Dimensions (mm)39.5 x 2643.5 x 31.5
Active Area (mm)31.1 x 20.235.2 x 26.2
Sensor TechnologyCMOS APS Fiber PlateCMOS APS Fiber Plate
Maximum Gray Levels40964096
Sensor Cable3 feet (1m)3 feet (1m)
Cable AttachmentReinforced Strain ReliefReinforced Strain Relief
USB ModuleIntegrated USB 2.0 ModuleIntegrated USB 2.0 Module
SoftwareProf. SuniProf. Suni
X-Ray Imaging Properties SuniRay 2 Digital Intraoral Sensor Size 1 and Size 2
  • Resolution: The pixel resolution of the high resolution (HiRes) sensors exceeds 15 lp/mm. The standard resolution of an X-Ray image, as measured by the modulation transfer function (MTF) exceeds 12 lp/mm. This is measured by using a standard 60 kV intraoral X-ray source.
  • Does Efficiency: The sensor will produce a high quality image with an X-Ray dose that is only a fraction of the standard dose required by Dental X-Ray film.
  • Diagnostic Efficacy: The system will produce a superior image quality of images obtained when using standard dental X-Ray film. This allows the dentist to diagnose standard intraoral pathologies encountered during screening procedures.
  • Wide dynamic range: The sensor pixel well capacity is very high, allowing a higher accommodation of greyscale (bone density) dynamic range.

Roland DWX-52DC Dental Milling Unit

DWX-52DC

| 5-Axis (Control XYZAB simultaneously) | Milling method:Dry mill | Cuttable material:Zirconia, Wax, PMMA, Composite resin, PEEK, Gypsum |
The DWX-52DC Dental Mill with Disc Changer is the newest addition to the popular DWX series of 5-Axis Dental Milling Machines. With a combination of automated functions designed to help reduce manual work, production of dental restorations is now even more efficient and reliable. The DWX-52DC’s open architecture means it can be used with the CAD/CAM software that your technicians are already familiar with in order to cut learning time and create the optimum workflow for your production environment. The DWX-52DC provides an efficient digital solution for both dental laboratories seeking to boost production capabilities, as well as labs looking to expand into the digital realm.
DWX-52DC
Cuttable materialZirconia, Wax, PMMA, Composite resin, PEEK, Gypsum, Fiber reinforced resin, CoCr sinter metal
Loadable workpiece shapeStep section:98.5 mm (diameter), height 10 mm
Body section:95 mm (diameter), height max. 35 mm Pin diameter: 6 mm
Pin diameter:6 mm
Loadable workpiece weightUp to 850 g
Number of adapters housed6
Operating speedXYZ axis:0.24 to 70.9 in./min.(6 to 1,800 mm/min.)
Spindle motorBrushless DC Motor
Spindle speed6,000 to 30,000 rpm
Rotary axis travel angleA:±360°
B:±30°
Number of burs housed15
Attachable burShank diameter:4 mm
Length:40 to 55 mm
Compatible compressed air0.2 MPa
InterfaceUSB
Control command setRML-1, NC code
Power requirementsAC 100 V to 240 V ±10%, 50/60 Hz, 2.0 A (overvoltage category II, IEC60664-1)
Power consumptionApprox. 200 W
Operating noiseDuring operation:70 dB (A) or less (when not cutting),
During standby:45 dB (A) or less
External dimensionsWidth x Depth x Height:34.6 x 26.0 x 23.6 in. (880 x 660 x 600 mm)
Weight:105 kg (231.5 lbs.)
The ultimate in ease Roland DWX-52DC Dental Milling Unitmaterial flexibility and unattended production, the DWX-52DCi dental milling machine with automatic disc changer expands your lab production and profit. With a 6-slot Automatic Disc Changer, 15-station Automatic Tool Changer and other automated features, it gives users of all skill levels an exceptionally powerful, efficient and affordable dental restoration solution.

Dexis Intraoral Digital Dental X-Ray Sensor

Software Ease of Use According to the manufacturer, the DEXIS x-ray software was designed to be highly effective throughout diagnosis, treatment planning, and treatment. It is intended to serve as an imaging hub, managing all digital images, including intra- and extraoral radiographs and photographs. The manufacturer states that the images can be quickly organized, stored, retrieved, printed, and shared with patients and colleagues. The 9 dentists who participated in this product evaluation were asked to rate the DEXIS Digital Imaging software on its ease of use with regard to taking and accessing radiographs and for diagnosis, patient education, and communication with colleagues and insurance companies. Six of the evaluators rated the system as excellent and 3 rated it as very good. One evaluator commented that “when communicating with patients, we use DEXIS images displayed on a monitor in front of the patient every day on virtually every patient.”Software Integration The manufacturer claims that the DEXIS imaging software can be easily integrated with all major practice management systems. According to DEXIS, the DEXIS Integrator automatically synchronizes with the patient record. When the evaluators were asked to rate the software integration with practice management software and interface with hardware (eg, cameras, panoramics, and scanners), 78% rated it as excellent to very good, while 22% rated it as good. One of the evaluators said, “The bridge to our practice management systems is seamless. We use [the] DEXIS digital pan[oramic] so that we can store panoramic x-rays easily in the same location as full series. We use an intraoral camera to store preoperative and interoperative photographs for excellent documentation.”Sensor Comfort and Ease of Use According to DEXIS, the heart of their digital system is the PerfectSize sensor. The manufacturer states that their single-size sensor has 3 advantages: 1) because the electronics are on the back of the sensor, the active imaging area is most of the total sensor size; 2) the beveled corners, slim profile, and rounded casing allow for accurate placement and patient comfort; 3) patented cord placement allows the practitioner to take vertical and horizontal bitewings and all periapicals with only 1 universally sized sensor. The evaluators were asked to rate both the ease of use of the sensor and patient comfort. Five evaluators rated ease of use excellent and 4 rated it very good. With regard to patient comfort, 3 evaluators rated the sensor excellent and 6 rated it very good. One evaluator noted that he experienced a few issues when placing the sensor in some children and patients with very small mouths. Another evaluator, however, is very happy with the sensor, saying, “I chose DEXIS to take a full radiographic series on every patient. It was the only direct image system we tested that met that objective.”Image Quality Dexis Intraoral Digital Dental X-Ray Sensor According to DEXIS, their digital xray system provides detailed image quality and includes image enhancement tools that increase diagnostic capabilities. When the 9 evaluators were asked to rate the system’s image quality and enhancement aids, 89% rated them as excellent to very good. One of the evaluators commented that the system’s “ClearVu and image magnification allow us to diagnose very effectively.”Overall Satisfaction When asked to rate their overall satisfaction with the DEXIS Digital X-ray System, 89% of the evaluators rated it as excellent to very good. Commented one evaluator, “DEXIS has been very responsive to our needs.” 

Dexis Intraoral Digital Dental X-Ray Sensor

Product Description

Dexis Intraoral Digital Dental X-Ray SensorSoftware Ease of Use According to the manufacturer, the DEXIS x-ray software was designed to be highly effective throughout diagnosis, treatment planning, and treatment. It is intended to serve as an imaging hub, managing all digital images, including intra- and extraoral radiographs and photographs. The manufacturer states that the images can be quickly organized, stored, retrieved, printed, and shared with patients and colleagues. The 9 dentists who participated in this product evaluation were asked to rate the DEXIS Digital Imaging software on its ease of use with regard to taking and accessing radiographs and for diagnosis, patient education, and communication with colleagues and insurance companies. Six of the evaluators rated the system as excellent and 3 rated it as very good. One evaluator commented that “when communicating with patients, we use DEXIS images displayed on a monitor in front of the patient every day on virtually every patient.”Software Integration The manufacturer claims that the DEXIS imaging software can be easily integrated with all major practice management systems. According to DEXIS, the DEXIS Integrator automatically synchronizes with the patient record.When the evaluators were asked to rate the software integration with practice management software and interface with hardware (eg, cameras, panoramics, and scanners), 78% rated it as excellent to very good, while 22% rated it as good. One of the evaluators said, “The bridge to our practice management systems is seamless. We use [the] DEXIS digital pan[oramic] so that we can store panoramic x-rays easily in the same location as full series. We use an intraoral camera to store preoperative and interoperative photographs for excellent documentation.”Sensor Comfort and Ease of Use According to DEXIS, the heart of their digital system is the PerfectSize sensor. The manufacturer states that their single-size sensor has 3 advantages: 1) because the electronics are on the back of the sensor, the active imaging area is most of the total sensor size; 2) the beveled corners, slim profile, and rounded casing allow for accurate placement and patient comfort; 3) patented cord placement allows the practitioner to take vertical and horizontal bitewings and all periapicals with only 1 universally sized sensor. The evaluators were asked to rate both the ease of use of the sensor and patient comfort. Five evaluators rated ease of use excellent and 4 rated it very good. With regard to patient comfort, 3 evaluators rated the sensor excellent and 6 rated it very good. One evaluator noted that he experienced a few issues when placing the sensor in some children and patients with very small mouths. Another evaluator, however, is very happy with the sensor, saying, “I chose DEXIS to take a full radiographic series on every patient. It was the only direct image system we tested that met that objective.”Image Quality According to DEXIS, their digital xray system provides detailed image quality and includes image enhancement tools that increase diagnostic capabilities. When the 9 evaluators were asked to rate the system’s image quality and enhancement aids, 89% rated them as excellent to very good. One of the evaluators commented that the system’s “ClearVu and image magnification allow us to diagnose very effectively.”Overall Satisfaction When asked to rate their overall satisfaction with the DEXIS Digital X-ray System, 89% of the evaluators rated it as excellent to very good. Commented one evaluator, “DEXIS has been very responsive to our needs.”System Includes* a highend CCD sensor * portable PC card and DEXusb connection options * DEXIS imaging software * a complete set of sensor holders and accessories * on-site training * a printed instruction manual * training tutorials on CD * a quick reference guide for the operatory * 1 year of DEXcare support.

Roland DWX-4W Dental Milling Unit

Reliable High PerformanceIn addition to milling on X, Y and Z axes, the DWX-4W rotates pin-type blocks 360 degrees on a fourth axis (A axis) to support undercuts. The ball screw-driven 4-axis control allows for smooth, high-precision machining. The DWX-4W’s high-performance 60,000-RPM Jaeger spindle is known for its reliability and supports precision milling of glass ceramics and composite resin. With its multi-pin clamp, the DWX-4W is a wet dental milling machine that can mill up to three different pin-type materials continuously in one operation. As a result, prosthetics for up to three different patients can be produced in a single production run, saving time, labour and costs.

Features and Benefits:

  • Simultaneous 4-axis machining
  • 4-state Automatic Tool Changer (ATC)
  • 60,000 RPM Jaeger DentaDrive Spindle
  • CAM software bundled
  • Virtual Machine Panel (VPanel)
  • Fully-integrated water and coolant filtration system
  • Coolant leakage & flow monitoring sensors
  • Tool life monitoring
  • Mail notification system
Summary Roland DWX-4W Dental Milling Unit
• Maximum Convenience • Virtual Machine Panel • Progress and Error Alerts for Error-Free Milling • Coolant Compartment and Water Filtration • Clean Cutting Area for Precision Milling • Economical Open Architecture • CAM Software Included • Growth Potential • Peace of MindThe DWX-4W’s high-performance 60 000 RPM Jaeger DentaDrive spindle supports precision milling. It’s equipped to mil pin-type blocks, including glass ceramics and composite resin – acclaimed in the industry for their superior strength and aesthetics. materials can be finished with a short finishing tome, dramatically reducing labour and production time.In addition to milling on X, Y and Z axes, the DWX-4W rotates pin-type blocks 360 degrees on a fourth axis (A axis) to support undercuts, the rigid ball screw-driven 4-axis control allows for smooth, high-precision machining. With its multi-pin clamp, it can mil up to three different pin-type materials continuously, enabling production three different patient prosthetics in a single production run. it also features an Automatic Tool Changer (ATC) that auto-changes grinding burs without interrupting the production process.

Roland DWX-4 Dental Milling Unit

Digital dental technologies are transforming every aspect of the dental industry, making it easier than ever to produce precise crowns, copings and bridges. The latest technological advancements in scanning, CAD/CAM software and CNC milling allow digital dental labs to deliver custom production with speed and precision and enjoy optimal accuracy and repeatability.The industry’s most user-friendly desktop milling solution, the Roland DWX-4 compact dental mill, is at the forefront of this technological revolution. With the DWX-4, you can mill a single crown or small bridge quickly and economically. Affordably priced, the DWX-4 is ideal for any lab just getting started in digital dentistry or those labs with scanners who no longer wish to outsource production. It’s also the perfect addition to labs that need a second device for urgent jobs. With the DWX-4, these labs can mill a single crown or bridge on demand, without tying up their larger production mills.This affordable, precise 4-axis desktop mill is an ideal choice for labs just getting started in digital dentistry or for those that want to perform smaller, time-urgent jobs (like a single crown or small bridge) without tying up their larger production mills.

Features and Benefits:Roland DWX-4 Dental Milling Unit

  • Compact design is ideally suited for all lab environments
  • 2-station automatic tool changer
  • 4-axis simultaneous lead/worm screw driven machining
  • Tool diagnostics with tool life management
  • Air blower to aid with difficult-to-mill materials
  • Negative ion generator for neutralizing  static electricity
  • Multicast capability for connecting up to four DWX dental mills to one computer
  • Color-coded LED light signals machine status
  • Automatic calibration
  • E-mail notification system
  • Dust collection system with airflow sensor
  • Virtual panel ensures easy operation
  • G-code compatible
  • Compatible with industry-standard software
  • Open architecture for easy integration into a complete production solution
  • CAM software included
The industry’s most cost-effective and user-friendly dental mill, the DWX-4 produces single crowns, copings, bridges and hybrid abutments with precision and ease. The DWX-4 is the ideal device for labs just getting into digital milling or labs that need a second device for urgent jobs. With the DWX-4 dental milling system, you can quickly and economically mill on-demand in a wide variety materials, including the latest hybrid ceramics.

WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
You're viewing: SuniRay 2 Digital Intraoral Sensor Size 1 and Size 2 For Sale $2,800.00
Add to cart
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
Shopping cart close