View cart “Millennium Dental PerioLase MVP-7 Digital TruePulse Nd:YAG” has been added to your cart.
-46%
Availability: In Stock
SOTA Clio Digital X-Ray Sensor Size 2 For Sale
$5,200.00$2,800.00
The Clio Digital X-ray Sensor is equipped with a patented, Kevlar reinforced cable to provide maximum durability. Unlike other products, the USB cable of the Clio is fully replaceable if damaged. Constructed with special shock absorbers inside the sensor housing to protect components from exterior damage, the Clio is also one of the few fully water submersible sensors, sealed with a unique rubber polymer interior housing.
Other people want this. 15 people have this in their carts right now.
The Clio Digital Dental X-Ray Sensors have Next Generation CMOS technology, fiber optic sensors create 20+ actual line pairs per mm (26.3 theoretical line pairs per mm).With our Cliosoft Imaging Software, we can gaurantee our Clio Digital Dental X-Ray images match up or surpass any competing system. We make this promise based on feedback from actual dentists.Rounded edges allow for maximum patient comfort. Ideal intraoral sensor width and thinness in two sizes for pedo and adult.
The Clio Digital X-Ray Sensors maximize image area ratio, minimizing cutoff space to mimic the size of traditional x-ray film. Next Generation CMOS technology fiber optic sensors create 20+ actual line pairs per mm (26.3 theoretical). With our user-friendly, tablet and PC-ready cliosoft Digitial Imaging Software, we guarantee the highest quality images in the industry.
Features:
– All new Direct Integration Technology
– Thin sensor hardware with rounded corners for maximum comfort
– Direct USB cable with no docking station
– Repairable USB cable for longevity of sensors
– Fiber optic plate sensors for low-noise ratio
– Largest active area for maximum coverage
– Fully waterproof sensor head with sealed cable and housing design
– USB connector: USB 2.0, USB 3.0
– Sensor Technology
– Next Generation CMOS Fiber optic Sensors
– Maximum Gray Levels – 4096 (12-bit)
Specifications:
– External Dimensions: 30.49 x 42.80 mm
– Active Area: 25.99 x 36.02 mm
– Sensor Plate Thickness: 5.41 mm
– Sensor Cable Length: 3 meters
– Image Resolution: 26.3 lp/mm theoretical 20 lp/mm actual
– Image Size: 1896 x 1368 pixels
– Image Pixel Size: 19×19 microns
The Clio Digital X-ray Sensor is equipped with a patented, Kevlar reinforced cable to provide maximum durability. Unlike other products, the USB cable of the Clio is fully replaceable if damaged. Constructed with special shock absorbers inside the sensor housing to protect components from exterior damage, the Clio is also one of the few fully water submersible sensors, sealed with a unique rubber polymer interior housing.
Reviews (0)
Reviews
There are no reviews yet.
Be the first to review “SOTA Clio Digital X-Ray Sensor Size 2 For Sale” Cancel reply
The Clio Digital X-ray Sensor is equipped with a patented, Kevlar reinforced cable to provide maximum durability. Unlike other products, the USB cable of the Clio is fully replaceable if damaged. Constructed with special shock absorbers inside the sensor housing to protect components from exterior damage, the Clio is also one of the few fully water submersible sensors, sealed with a unique rubber polymer interior housing.
Milling Unit:• Choose from CEREC MC, CEREC MC X or CEREC MC XL
• Get access to the entire range of chairside treatment with up to 40 mm block size, including bridges and abutments
• Create fully anatomic, precise treatments quickly
• CEREC Guide 2 surgical guide
• Dry mill ready
• Includes CEREC software
H14 Tipped Er:YAG Handpiece with 4 Tips For Perio, Endo, Hard/Soft Tissue
PS04 Pixel Structure Er:YAG Handpiece
Accessories
3 Sets of Laser Safety Goggles
Operators Manual
1 Year Warranty
Eco mode• The unit switches off all unnecessary components in idle mode.• The unit can be restarted in less than 1 second at any time.• Consumption of just 10 W in Eco mode compared to 200 W instandby mode.The advantages for you:• Active reduction of lamp wear and tear• Reduction of operating costs
DEKA’s proprietary UltraSpeed pulse, with high peak powers, allows the clinician the capability to incise tissue with the speed of a scalpel while sealing blood vessels for a bloodless surgical field. The speed of the pulse allows the surrounding tissue time to cool. The result is virtually no trauma to the surrounding tissue. This means faster, more precise incisions, with improved healing properties. In turn, this leads to more effective treatments with next to no downtime-many times without the need for sutures. Because of the laser’s precision, power and control, the Smart US-20D CO2 laser is the laser of choice in oral surgery and periodontal procedures. It provides the broadest procedure spectrum of any dental laser available.
PerioLase MVP-7 Hard/Soft Tissue Dental Laser is the only laser designed especially for the LANAP protocol (also referred to as Laser Assisted New Attachment Procedure, Laser Excisional New Attachment Procedure Laser ENAP LPT, or LASER PERIODONTAL THERAPY).
Content
SOTA Clio Digital X-Ray Sensor Size 2
SOTA Clio Digital X-Ray Sensor Size 2The Clio Digital Dental X-Ray Sensors have Next Generation CMOS technology, fiber optic sensors create 20+ actual line pairs per mm (26.3 theoretical line pairs per mm).With our Cliosoft Imaging Software, we can gaurantee our Clio Digital Dental X-Ray images match up or surpass any competing system. We make this promise based on feedback from actual dentists.Rounded edges allow for maximum patient comfort. Ideal intraoral sensor width and thinness in two sizes for pedo and adult.The Clio Digital X-Ray Sensors maximize image area ratio, minimizing cutoff space to mimic the size of traditional x-ray film. Next Generation CMOS technology fiber optic sensors create 20+ actual line pairs per mm (26.3 theoretical). With our user-friendly, tablet and PC-ready cliosoft Digitial Imaging Software, we guarantee the highest quality images in the industry.Features:– All new Direct Integration Technology
– Thin sensor hardware with rounded corners for maximum comfort
– Direct USB cable with no docking station
– Repairable USB cable for longevity of sensors
– Fiber optic plate sensors for low-noise ratio
– Largest active area for maximum coverage
– Fully waterproof sensor head with sealed cable and housing design
– USB connector: USB 2.0, USB 3.0
– Sensor Technology
– Next Generation CMOS Fiber optic Sensors
– Maximum Gray Levels – 4096 (12-bit)Specifications:– External Dimensions: 30.49 x 42.80 mm
– Active Area: 25.99 x 36.02 mm
– Sensor Plate Thickness: 5.41 mm
– Sensor Cable Length: 3 meters
– Image Resolution: 26.3 lp/mm theoretical 20 lp/mm actual
– Image Size: 1896 x 1368 pixels
– Image Pixel Size: 19×19 microns
The Clio Digital X-ray Sensor is equipped with a patented, Kevlar reinforced cable to provide maximum durability. Unlike other products, the USB cable of the Clio is fully replaceable if damaged. Constructed with special shock absorbers inside the sensor housing to protect components from exterior damage, the Clio is also one of the few fully water submersible sensors, sealed with a unique rubber polymer interior housing.
CEREC Primescan AC Intraoral scanner
Cerec Primescan from Dentsply Sirona is the most advanced digital scanner on the market. It’s providing a level of accuracy never before seen in dentistry. At the peak of innovation, it is widening the gap between those with and without digital dentistry. The Prime Scan is the fastest most accurate intraoral scanner to date. With new scanning technology, it is the ultimate in scanning. Prime Scan and CEREC 5.0 combinations are greatly reduced because more data allows many applications to become automated.For more than 30 years, CEREC® has provided technological precision, superior design and excellent performance to thousands of practices. Now, experience a brand-new fully integrated solution with CEREC Primescan AC. Acquire precise digital impressions with Primescan, design your proposal on the Primescan AC using the intelligent software, then produce precise, smooth restorations with your choice of milling unit. Find the next level of productivity and patient care – it’s all here.How Does CEREC Primescan Work?
CEREC Primescan is an alternative to traditional intraoral dental impressions, which use a putty-like substance to take physical impressions of your teeth. This method does not allow for digital assessment of your mouth, and some patients find it the process of physical impressions to be uncomfortable.CEREC Primescan uses a wand-like device, loaded with powerful imaging sensors which can capture more than 50,000 images of your mouth per second. These images are quickly stitched and compiled into a 3D image of your teeth, jaw, gums, and mouth, and displayed on a high-definition screen for immediate assessment by our doctors.Using this sensor, our doctors can image your entire mouth up to 20mm in depth, including gums, blood, and bone structures, quickly and accurately. The Primescan software (as compared to the Omnicam) creates high-resolution 3D models to assess your oral health and create the very best crowns, implants, removable prosthesis, restorations, and even 3D prints. With just a few quick sweeps of the CEREC Primescan device, we’ll be able to generate an in-depth, modifiable 3D image of your mouth in minutes.The Benefits of CEREC Primescan:
An excellent choice for outstanding results: Primescan is your perfect starting point in digital dentistry. No matter how you would like to design your workflows, Primescan is the enabler for efficient digital workflows – both chairside in your practice and with your preferred partners.Well designed and perfectly compatible: Along with the high-performance intraoral scanner comes the new Acquisition Center. Together, they form a highly effective and most comfortable system – meeting your needs with two individual software configurations:So, why is CEREC Primescan such a big deal? Here are just a few improvements to this sophisticated system:Shorter wait times – We can quickly image your mouth without waiting for dental impressions to set, allowing us to treat each patient more quickly and effectively. A full jaw impression only takes 2 minutes. This adds up to less time spent in the dental chair.Real-time image processing – Our dentists can quickly adjust and modify scanned images using filters and other tools, leading to more accurate diagnostics and better overall patient outcomes.Extremely versatile – CEREC Primescan can be used for almost any dental procedure. From implant dentistry to the creation of CEREC same-day crowns, the straightening of teeth, whitening, development of dentures and partial dentures.CEREC Primescan AC with CEREC Software Sirona Advantages:
Enables all kinds of treatment, from a single tooth to full arch
With Primescan intraoral scanning is now more accurate, faster and easier
Allows an efficient workflow, both chairside and with preferred partners
Along with the high-performance intraoral scanner comes the new Acquisition Center, together forming an effective and most comfortable system, meeting your needs with two individual software configurations: Primescan AC with Connect Software (supports the connection to established partners workflows) and CEREC Primescan AC with CEREC Software (ideal for cabinets)
Smart Pixel Sensor technology – allows superior precision and excellent detail reproduction, processes more than 1 million 3D points per second, producing photorealistic and highly accurate data
Due to its ability to scan at an incredible data density, it delivers complete 3D structures of everything in its field of view
Its dynamic depth scan technology enables perfect sharpness and outstanding precision, even at a measuring depth up to 20 mm
Easy to use
Easy scanning of all dental materials and hard to access areas
Allows you to start scanning right away
Self-heating for fog-free scanning
The increased field of view visualizes larger areas with fewer sweeps and immediate precision
Faster scanning with a smooth scan flow
Consolidating more than 50.000 images per second and fast processing of exactly the data the software needs Easy capturing and quicker processing of more data in higher resolution
Complete 3D-scan models are displayed immediately, no matter how fast you scan
Accelerate your workflow: Due to seamless, validated and open data transfer options, labs and other third parties are supplied with high-resolution models at an instant
3 different sleeves (disposable and stainless steel, with sapphire glass or autoclavable)
Acquisition Center – Smart features and greater comfort: intuitive use via movable 16:9 touchscreen and touchpad for perfect ergonomics
Kinematics for perfect ergonomic positioning
Smart Hygiene concept for fast and easy disinfection
Full mobility with more than 60-min. battery buffer
CEREC Primescan AC with CEREC Software – complete chairside system, which offers flexible data export options, with automatized workflow thanks to Artificial Intelligence and touch-enabled and intuitive user interface
Milling Unit:• Choose from CEREC MC, CEREC MC X or CEREC MC XL
• Get access to the entire range of chairside treatment with up to 40 mm block size, including bridges and abutments
• Create fully anatomic, precise treatments quickly
• CEREC Guide 2 surgical guide
• Dry mill ready
• Includes CEREC softwareStriking in every detail: The new Acquisition CenterThe new Acquisition Center is a work station designed for modern dentistry and with the dentist in mind. It comes with a touchpad and a 16:9 wide-format movable touchscreen, offering you a highly intuitive and ergonomic work platform.Your benefits at a glance:
Touchscreen & Touchpad for most comfortable, intuitive use
Kinematics for perfect ergonomic positioning
Smart Hygiene concept for fast and easy disinfection
Mobility concept for full mobility with more than 60-min. battery buffer
The best choice for your practice: Take digital impressions and continue working with your trusted partners or enjoy the benefits of complete chairside workflows.Primescan meets your needs with two individual software configurations:Primescan AC with Connect Software:
Supports data transfer options to your preferred partners
Secure and encrypted data transfer through Connect Case Center Inbox
Easy upgradability to full chairside workflow
Touch-enabled and intuitive user interface
CEREC Primescan AC with CEREC Software:
Supports full chairside workflows for single-visit dentistry
Flexible data export options
Automatized workflow thanks to Artifical Intelligence
Touch-enabled and intuitive user interface
Technical Data:CEREC Primescan AC Intraoral scanner
CAD system for high-precision intraoral optical impressions
High-resolution, heated intraoral 3D scanner
Integrated image processing
High processing power due to state-of-the-art processor
Trackball or touchpad
Hand and foot controlled enter keys
Ethernet port and WLAN
USB interfaces
The high-resolution 3D intraoral scanner allows image acquisition with the image control inside the scanner, the image data transfer is made through USB 2.0 interface
21.5″ inch TFT LED flat-screen display, HD resolution: 1920 x 1080 pixels
Mobile housing, with no water or air connection required
Voltage: 100 – 240 VAC/50-60Hz
Nominal current: 5.0 – 2.1 A
Type of protection against electric shock: Class I device
Waterproof: no
Degree of contamination: 2
Installation category: II
Operating mode: continuous
Dimensions W x H x D: 408 (537) x 1190 x 443mm
Total weight: 38kg
Weight without monitor and battery: 31kg
Weight without battery: 36kg
PC components:
Processor: Intel
RAM: 32GB RAM
Hard disks: 1x PCIe SSD + 1x SATA HDD
Network card: Ethernet 10/100/1000MBit/s
Operating system: Windows 10, 64 bit
Installation OS: pre-installed, from the factory
Transportation and storage conditions:
Temperature: -25°C – + 60°C
Relative humidity: 10% – 75%
Air pressure: 700hPa – 1060hPa
Operating conditions:
Temperature: 10°C – 35°C
Relative humidity: 30% – 85%, no condensation
Air pressure: 700hPa – 1060hPa
Operating altitude: up to 3000m
Delivery form:
CEREC Primescan AC with CEREC Software – 1 piece
Fotona Lightwalker ATS Dental Laser System
Multifunctional Medical Laser Fotona LightWalker AT Hard and Soft-Tissue Dental Laser
H14 Tipped Er:YAG Handpiece with 4 Tips For Perio, Endo, Hard/Soft Tissue
PS04 Pixel Structure Er:YAG Handpiece
Accessories
3 Sets of Laser Safety Goggles
Operators Manual
1 Year Warranty
LightWalker AT is the most advanced and highest performance LightWalker model. It comes equipped with high-performance Er:YAG and Nd:YAG lasers, a state-of-the-art OPTOflex articulated arm, an unrivaled 20W of power and Fotona patented QSP pulse technology for ultimate performance and treatment precision
LightWalker is the first dental laser system that works with a digitally controlled dental handpiece. Fotona’s revolutionary X-Runner technology, with ultrahigh-precision HDS (High Density Scanning) mode, increases the precision of dental laser treatments by helping to swiftly and accurately guide the laser beam across the treatment area according to perfectly shaped, predefined patterns.
LightWalker lasers are designed for ultimate versatility, with one of the most comprehensive lists of clinical applications available on any dental laser. With both tipped and tipless handpieces, your clinical options are endless. LightWalker offers the highest standard of dental treatment, and at the same time simplicity of use in:
Conservative Dentistry
Endodontics
Periodontics
Soft-tissue Surgery
Implantology
Aesthetic Treatments
Photobiomodulation.
Fast efficient cutting with unmatched patient comfort
With the advent of QSP technology and higher output power (several kW), the LightWalker ATS has established a new standard for ablation/cutting speed. This new accelerated cutting speed provides today’s dentists with the speed and precision they demand, while simultaneously increasing patient comfort.
Precise tissue surgery with simultaneous disinfection
The homogeneous absorption of the Nd:YAG laserin soft tissue results in controlled tissue vaporization with simultaneous coagulation for superior healing and disinfection.
Easy-to-use touch screen Fotona Lightwalker ATS Dental Laser System
LightWalker has an easy-to–use color touch- screen with an adjustable tilt and 80 customizable presettings that cover more than 40 different applications.
Easy access spray/heated water reservoir
The integrated spray water container means that you don’t have to rely on any water mains outlet, making your laser system exceptionally mobile and hasslefree. The container is handily located at the back of the system for easy refilling access. Additionally, the water is heated to body temperature, avoiding cold sensitivity reactions during procedures.
Patented weightless OPTOflex arm
LightWalker’s unique and patented OPTOflex Er:YAG articulated arm is designed to transmit a high-power laser beam to the handpiece, while maintaining the quality of the laser beam to ensure precision and repeatability even at the highest settings.
The OPTOflex arm is perfectly balanced during use, making handpieces completely weightless in your hand. OPTOflex allows a full range of motion and maximum degree of control as it makes maneuvering the handpiece much smoother, which improves treatment precision and ease.
Wireless footswitch
LightWalker also has an optional wireless footswitch that avoids unnecessary tangling of electric cables on your practice floor.
BEGO LASERSTAR T DENTAL LABORATORY LASER SYSTEMThe product is a welding unit which is powerful and compact device. The features provided are user friendly of device. The welding energy is controlled with pulse time, adjustable focus and charging voltage provides perfect welding. The control arrangement and the comfortable design help in working suitably and without being tired. The large touch screen color display offers easy operation and intuitive navigation. The product uses pulse shaping for crack-free joints and high strength stress.
Technology:laser
Applications:dental laboratory
BEGO LASERSTAR T DENTAL LABORATORY LASER SYSTEM Quick and efficient working
With laser welding, you can reduce the time required by up to
80% since solder preparation and the use of welding flux is not
necessary: A soldering model is not required – work can be
conveniently performed directly on the master model.
The advantages for you:
• Time savings with laser welding as a state-of-the-art joining
technology
• Protection of resources since additional soldering materials are
not requiredBEGO LASERSTAR T DENTAL LABORATORY LASER SYSTEM Large colour touch display
The LaserStar T plus is operated and controlled using a 5.7 inch
colour touch display which offers quick response times and
simple menu navigation The large active area of 5.7 inches as
well as the simple menu navigation present a real improvement
in terms of operation compared to more conventional concepts.
The advantage for you:
• Convenient, intuitive operationBEGO LASERSTAR T DENTAL LABORATORY LASER SYSTEM Maximum stability and biocompatibility
Compared to soldered connections, the joints created with deep
welding are high-strength, as well as being mechanically far
more resilient and durable.
By not using base solder, real laser welding enables a homogeneous alloy structure to be created and galvanic corrosion to be
effectively prevented.
The advantage for you:
• Additional safety and reliability for your customers and patientsPrecise welding
The adjustable focus of 0.2 – 2.6 mm ensures high-strength
joints by means of targeted punctual welding, even with thin
orthodontic wires or in interdental spaces.
Regardless of whether bridge or supra constructions: Compared
to soldering, laser welding guarantees far great accuracy of fit.
The advantage for you:
• Perfect welding results for a large range of indicationsEco mode
• The unit switches off all unnecessary components in idle mode.
• The unit can be restarted in less than 1 second at any time.
• Consumption of just 10 W in Eco mode compared to 200 W in
standby mode.
The advantages for you:
• Active reduction of lamp wear and tear
• Reduction of operating costs
DEKA SMART US-20D C02 ULTRA SPEED PULSE HIGHThe Smart US-20D CO2 laser offers the practitioner the ultimate in soft tissue therapies and treatments in all areas of General Dentistry, Periodontics, Oral and Maxillofacial Surgery. Through its innovative design, its technical capabilities, and its versatile user programs, this laser has become the “workhorse” in the dental practice. The Smart US-20D is the only CO2 laser that incorporates all facilities for absolute accuracy in micro-surgical applications coupled with total efficiency in the speed of energy transmission, resulting in optimal clinical conditions and prognoses for post-operative recovery.DEKA’s proprietary UltraSpeed pulse, with high peak powers, allows the clinician the capability to incise tissue with the speed of a scalpel while sealing blood vessels for a bloodless surgical field. The speed of the pulse allows the surrounding tissue time to cool. The result is virtually no trauma to the surrounding tissue. This means faster, more precise incisions, with improved healing properties. In turn, this leads to more effective treatments with next to no downtime-many times without the need for sutures. Because of the laser’s precision, power and control, the Smart US-20D CO2 laser is the laser of choice in oral surgery and periodontal procedures. It provides the broadest procedure spectrum of any dental laser available.DEKA Smart US-20D C02 Ultra Speed Pulse High Dental Laser System Specifications
Manufacturer: DEKA
Model: SMART US-20 D
Power Requirements: 115V, 50/60Hz
Year: 2008
Laser Style: Cart
Fiber-Optic Trunk Condition:Functional
Laser Type:CO2DEKA Smart US-20D C02 GLOBAL LEADER
The El.En. group is the global leader in LASER technology providing industrial, medical, dental, and conservation laser solutions. The only company in the world to manufacture both medical and industrial CO2 lasers, El.En. is the only CO2 laser manufacturer that produces both their laser systems as well as their laser sources (both DC and RF excited). El.En. has been manufacturing CO2 lasers for 35 years and has placed approximately 30,000 CO2 systems worldwide. DEKA Lasers are currently sold and marketed in over 120 countries.
DEKA Smart US-20D C02 Ultra Speed Pulse High SCIENTIFIC FOCUSDriven by constant research and development, the El.En. group is committed to producing advanced laser devices defined by excellence in Since 1991, DEKA has helped thousands of health care professionals treat their patients utilizing the technological innovation that places their brands on top of every medical and dental discipline.
TECHNOLOGYUtilizing the latest micro-pulsed CO2 technology, an advanced articulating arm delivery system, and the latest RF technology – DEKA CO2 lasers represent the latest advancements in laser technology to deliver unparalleled performance in every dental discipline.
CONSERVATIONA leader in the field of laser applications for the preservation of the cultural heritage, they combine over 20-years of field experience offering in both Italy and around the globe the widest range of laser solutions dedicated to preservation and restoration of cultural artifacts.
Millennium Dental PerioLase MVP-7 Digital TruePulse Nd:YAG
Millennium Dental Technologies’ PerioLase MVP-7 Digital TruePulse Nd:YAG laser is specifically designed for the LANAP protocol, an evidence-based, patient-preferred laser periodontitis treatment, and the LAPIP protocol, which saves ailing/failing implants while maintaining gingival esthetics.
“The PerioLase MVP-7 allows the clinician to provide the LANAP protocol for periodontitis; the most patient friendly, effective, and now scientifically verified alternative to osseous periodontal surgery,” said Eric Johnson, DDS, of Torrance, Calif. “I have used the PerioLase MVP-7 for 7.5 years, and have been delighted with patient acceptance, durability of the product, and results produced by the laser.”The PerioLase MVP-7 Digital TruePulse™ Nd:YAG laser is specifically designed for the LANAP® protocol. The PerioLase MVP-7 is a powerful 6 watt FR (Free Running) Nd:YAG (Neodymium: Yttrium Aluminum Garnet) laser with the unique features necessary to perform the LANAP® Protocol and all other soft tissue procedures.The PerioLase MVP-7 is the latest generation of dentistry’s first pulsed Nd:YAG laser and the world’s most widely used dental laser platform. It’s the first laser in dentistry to incorporate DIGITAL technology for enhanced performance and reliabilityBenefits of PerioLase
Reduction in bleeding gums, bacteria, pain and bad breath
Teeth and smile are maintained
No stitches are needed
Minimal pain.
Minimal downtime after treatment
Minimal recession after treatment
Dimensions27.9 x 41.9 x 62.2 cm
(11 x 16.5 x 24.5 inches)
Weight19.6 kg (43 pounds)
Power6 watts
Physical Media SourceNd:YAG
Dental ApplicationsSoft And Hard Tissue Applications
Available Tips and SizesFlexible Fiber Optic Delivery System
360 µ
400 µ
600 µ
Tip Sterilization MethodAutoclave
Handpiece Type / SwivelAnodized Aluminum TrueFlex Three Part Hand Piece
Control PanelTouchscreen
Foot OperationYes
PortableYes
Wavelength1,064 nm
PerioLase MVP-7 Hard/Soft Tissue Dental Laser is the only laser designed especially for the LANAP protocol (also referred to as Laser Assisted New Attachment Procedure, Laser Excisional New Attachment Procedure Laser ENAP LPT, or LASER PERIODONTAL THERAPY).
An excellent choice for outstanding results: Primescan is your perfect starting point in digital dentistry. No matter how you would like to design your workflows, Primescan is the enabler for efficient digital workflows – both chairside in your practice and with your preferred partners.Well designed and perfectly compatible: Along with the high-performance intraoral scanner comes the new Acquisition Center. Together, they form a highly effective and most comfortable system – meeting your needs with two individual software configurations:So, why is CEREC Primescan such a big deal? Here are just a few improvements to this sophisticated system:Shorter wait times – We can quickly image your mouth without waiting for dental impressions to set, allowing us to treat each patient more quickly and effectively. A full jaw impression only takes 2 minutes. This adds up to less time spent in the dental chair.Real-time image processing – Our dentists can quickly adjust and modify scanned images using filters and other tools, leading to more accurate diagnostics and better overall patient outcomes.Extremely versatile – CEREC Primescan can be used for almost any dental procedure. From implant dentistry to the creation of CEREC same-day crowns, the straightening of teeth, whitening, development of dentures and partial dentures.CEREC Primescan AC with CEREC Software Sirona Advantages:
The new Acquisition Center is a work station designed for modern dentistry and with the dentist in mind. It comes with a touchpad and a 16:9 wide-format movable touchscreen, offering you a highly intuitive and ergonomic work platform.Your benefits at a glance:
Reviews
There are no reviews yet.