| Description | The APOLLO DI is our very latest camera. It impresses with its simple handling, small and lightweight camera and outstanding value for money. | Caries diagnostic aid for surface caries.
TRIOS 4 has built-in fluorescent technology that aids in the identification of possible caries. Using TRIOS 4, dental professionals can now be aided in the early-detection of surface caries, without the need for an additional scanning device.
Caries diagnostic aid for interproximal caries.
TRIOS 4 will also feature a dedicated transillumination smart tip later this year. The smart tip will aid in the identification of possible interproximal caries undetectable to the eye, without emitting radiation. | The Clio Digital X-ray Sensor is equipped with a patented, Kevlar reinforced cable to provide maximum durability. Unlike other products, the USB cable of the Clio is fully replaceable if damaged. Constructed with special shock absorbers inside the sensor housing to protect components from exterior damage, the Clio is also one of the few fully water submersible sensors, sealed with a unique rubber polymer interior housing. | FOTONA Lightwalker ATS Dual Wavelength Dental Laser Laser – YAG Package Includes: - Fotona LightWalker Laser Unit
- Wireless Footswitch
- R21-C2 Fiber Optic Nd:YAG Handpiece
- R21-C3 Fiber Optic Nd:YAG Handpiece
- H02 Tipless Er:YAG Handpiece
- H14 Tipped Er:YAG Handpiece with 4 Tips For Perio, Endo, Hard/Soft Tissue
- PS04 Pixel Structure Er:YAG Handpiece
- Accessories
- 3 Sets of Laser Safety Goggles
- Operators Manual
- 1 Year Warranty
| The E4 boasts double the speed, double the accuracy, and double as many cameras as its predecessor the E3, delivering improved efficiency and consistency with every scan. From small labs seeking the best-of-the-best, to high-volume, full-service labs striving for a leaner workflow, our E4 lab scanner is the right choice for you. | The Medit T710 desktop scanner is equipped with a fast scan engine and highly efficient software algorithm which work in tandem to produce a full-arch scan in just 8 seconds. |
| Content | Sirona Apollo DI Intra Oral Scanner
APOLLO DI:
The Sirona Apollo DI Intra Oral Scanner features easy handling, precise imaging, and the proven Sirona Connect workflow. The impression system includes an imaging unit, APOLLO Connect software, and the APOLLO DI intraoral
camera,with which users can make digital impressions of the clinical situation in a seamless workflow. To do this, a moisture-insensitive high-contrast spray is sprayed on the teeth very finely. Fine particles in the spray ensure high contrast and thus very precise images.The most cost-effective start to digital impression-taking.
APOLLO DI
APOLLO DI, the specially developed intraoral scanner for cost-efficient digital impressions.
Easy handling thanks to multitouch control
Small and lightweight camera
Export of scan-data in the laboratory
No follow-up costs
OPEN APOLLO DI*:
Export of digital impression data (captured with the APOLLO DI in the practice and received via the Sirona Connect Portal) in an open ST L format for processing in other CAD/CAM systems.Designed to provide an economical entry point into CAD/CAM dentistry, Sirona’s APOLLO DI digital impression system includes an imaging unit, APOLLO Connect software and the APOLLO DI intraoral camera.The system provides precise imaging with the use of a contrast spray, and digital impression data can be sent to dental labs via the Sirona Connect system where it can be turned into a digital restoration design in Sirona’s inLab software or compatible 3rd party software applications, according to a press release.The new APOLLO DI is a complement to the company’s existing CEREC Bluecam and CEREC Omnicam options which each use a different imaging technology, but send the digital impressions through the same workflow. APOLLO DI is designed for practices looking to take digital impressions but continue to work with a lab, while the Bluecam and Onmicam can each be purchased as stand-alone digital impression systems, or with a mill for complete chairside CAD/CAM dentistry. | 3Shape TRIOS 4 Intraoral ScannerOur most powerful intraoral scanner to date Take your dentistry beyond treatment
Our intraoral scanning solutions allow you to take your dentistry beyond. The new 3Shape TRIOS 4 combines our established superior scanning technology with groundbreaking caries diagnostic aid technology* for both surface and interproximal caries. No additional scanning device needed. Smart tips 3Shape TRIOS 4 Intraoral ScannerThe new generation of TRIOS smart tips feature instant-heat technology for optimized scanning.Be scan-ready in seconds with instant-heat technology.Scan 2-3 times as many patients with instant-heat in combination with 30% more battery life.Optimal scanning due to automatic use counter and tip-change alert.The TRIOS system is a complete in-house ecosystem including a scanner and extensive design software. This means there are plenty of options depending on your needs. Those who are just looking for a scanner and want to utilize labs may look into the basic, cheaper options. Those who want to design crowns, bridges and other prosthetics can opt for design modules. The only missing component is a milling machine, which if you want to mill restorations in-house, will have to be from a third party. This proves to be a weak link in the digital chain.At iDD, we have been using the TRIOS 3 for over four years in our clinic, spending literally thousands of hours learning the workflow. We have carried out all aspects of dentistry using the TRIOS system including same-day crowns, implant surgical guides, implant restorations and digital smile design.Disclaimer: This is an impartial review of the scanner and we do not have any ties to the company. The team at iDD remain unwaveringly committed to providing you with objective and trustworthy information and therefore do not seek any sponsorship. 3Shape kindly loaned us a TRIOS 4 scanner, due to a personal interest in upgrading our older TRIOS 3 model. Our team at iDD are constantly approached by scanner companies to review their scanners and it is always made clear that they will have no part in writing reviews or restricting any conclusions iDD makes in our thorough analysis and clinical use of these products. | SOTA Clio Digital X-Ray Sensor Size 2
SOTA Clio Digital X-Ray Sensor Size 2The Clio Digital Dental X-Ray Sensors have Next Generation CMOS technology, fiber optic sensors create 20+ actual line pairs per mm (26.3 theoretical line pairs per mm).With our Cliosoft Imaging Software, we can gaurantee our Clio Digital Dental X-Ray images match up or surpass any competing system. We make this promise based on feedback from actual dentists.Rounded edges allow for maximum patient comfort. Ideal intraoral sensor width and thinness in two sizes for pedo and adult.The Clio Digital X-Ray Sensors maximize image area ratio, minimizing cutoff space to mimic the size of traditional x-ray film. Next Generation CMOS technology fiber optic sensors create 20+ actual line pairs per mm (26.3 theoretical). With our user-friendly, tablet and PC-ready cliosoft Digitial Imaging Software, we guarantee the highest quality images in the industry.Features:– All new Direct Integration Technology
– Thin sensor hardware with rounded corners for maximum comfort
– Direct USB cable with no docking station
– Repairable USB cable for longevity of sensors
– Fiber optic plate sensors for low-noise ratio
– Largest active area for maximum coverage
– Fully waterproof sensor head with sealed cable and housing design
– USB connector: USB 2.0, USB 3.0
– Sensor Technology
– Next Generation CMOS Fiber optic Sensors
– Maximum Gray Levels – 4096 (12-bit)Specifications:– External Dimensions: 30.49 x 42.80 mm
– Active Area: 25.99 x 36.02 mm
– Sensor Plate Thickness: 5.41 mm
– Sensor Cable Length: 3 meters
– Image Resolution: 26.3 lp/mm theoretical 20 lp/mm actual
– Image Size: 1896 x 1368 pixels
– Image Pixel Size: 19×19 micronsThe Clio Digital X-ray Sensor is equipped with a patented, Kevlar reinforced cable to provide maximum durability. Unlike other products, the USB cable of the Clio is fully replaceable if damaged. Constructed with special shock absorbers inside the sensor housing to protect components from exterior damage, the Clio is also one of the few fully water submersible sensors, sealed with a unique rubber polymer interior housing. | Fotona Lightwalker ATS Dental Laser System Multifunctional Medical Laser Fotona LightWalker AT Hard and Soft-Tissue Dental Laser Dual-Wavelength Laser System : 15W 1064nm Nd:YAG + 20W 2940nm Er:YAG Package Includes: - Fotona LightWalker Laser Unit
- Wireless Footswitch
- R21-C2 Fiber Optic Nd:YAG Handpiece
- R21-C3 Fiber Optic Nd:YAG Handpiece
- H02 Tipless Er:YAG Handpiece
- H14 Tipped Er:YAG Handpiece with 4 Tips For Perio, Endo, Hard/Soft Tissue
- PS04 Pixel Structure Er:YAG Handpiece
- Accessories
- 3 Sets of Laser Safety Goggles
- Operators Manual
- 1 Year Warranty
LightWalker AT is the most advanced and highest performance LightWalker model. It comes equipped with high-performance Er:YAG and Nd:YAG lasers, a state-of-the-art OPTOflex articulated arm, an unrivaled 20W of power and Fotona patented QSP pulse technology for ultimate performance and treatment precision LightWalker is the first dental laser system that works with a digitally controlled dental handpiece. Fotona’s revolutionary X-Runner technology, with ultrahigh-precision HDS (High Density Scanning) mode, increases the precision of dental laser treatments by helping to swiftly and accurately guide the laser beam across the treatment area according to perfectly shaped, predefined patterns. LightWalker lasers are designed for ultimate versatility, with one of the most comprehensive lists of clinical applications available on any dental laser. With both tipped and tipless handpieces, your clinical options are endless. LightWalker offers the highest standard of dental treatment, and at the same time simplicity of use in: Conservative Dentistry Endodontics Periodontics Soft-tissue Surgery Implantology Aesthetic Treatments Photobiomodulation. Fast efficient cutting with unmatched patient comfort With the advent of QSP technology and higher output power (several kW), the LightWalker ATS has established a new standard for ablation/cutting speed. This new accelerated cutting speed provides today’s dentists with the speed and precision they demand, while simultaneously increasing patient comfort. Precise tissue surgery with simultaneous disinfection The homogeneous absorption of the Nd:YAG laserin soft tissue results in controlled tissue vaporization with simultaneous coagulation for superior healing and disinfection. Easy-to-use touch screen Fotona Lightwalker ATS Dental Laser System LightWalker has an easy-to–use color touch- screen with an adjustable tilt and 80 customizable presettings that cover more than 40 different applications. Easy access spray/heated water reservoir The integrated spray water container means that you don’t have to rely on any water mains outlet, making your laser system exceptionally mobile and hasslefree. The container is handily located at the back of the system for easy refilling access. Additionally, the water is heated to body temperature, avoiding cold sensitivity reactions during procedures. Patented weightless OPTOflex arm LightWalker’s unique and patented OPTOflex Er:YAG articulated arm is designed to transmit a high-power laser beam to the handpiece, while maintaining the quality of the laser beam to ensure precision and repeatability even at the highest settings. The OPTOflex arm is perfectly balanced during use, making handpieces completely weightless in your hand. OPTOflex allows a full range of motion and maximum degree of control as it makes maneuvering the handpiece much smoother, which improves treatment precision and ease. Wireless footswitch LightWalker also has an optional wireless footswitch that avoids unnecessary tangling of electric cables on your practice floor. | 3Shape E4 Dental Lab ScannerThe E4 is a dental 3D scanner produced by 3Shape. 3Shape is a 3D scanner manufacturer based in Denmark.E4 dental scanner main features- Full arch scan in 9 seconds
- 4-micron accuracy
- Four 5-MP cameras
- Color acquisition
3SHAPE E4
Ultimate productivity with our fastest scanner ever
For those seeking the speed and accuracy to drive lab productivity and growth, look no further. The E4 boasts double the speed, double the accuracy, and double as many cameras as its predecessor the E3, delivering improved efficiency and consistency with every scan. From small labs seeking the best-of-the-best, to high-volume, full-service labs striving for a leaner workflow, our E4 lab scanner is the right choice for you.
4 micron
Scan with an accuracy of 4 microns (ISO 12836) for great case results. Combine this precision with increased speed and you can take on more implant cases, for example.
4 cameras
Four cameras save you time by scanning dies in the model instead of individually. You can even scan impressions instead of producing a gypsum model or combine impression and die at the same time.
5MP cameras
5MP cameras are super high definition cameras. They record 5 megapixel images with enhanced camera sensors, meaning you get superior image clarity and can do high-precision scanning.
HARDWARE SPECIFICS
The E4 is a marriage of iconic 3Shape design and superior technical specifications.
Cameras
Four 5 MP cameras enables efficient die scanning and impression scanning, improving your workflows by saving time
Accuracy
4 microns (ISO 12836), giving you the accuracy and precision you need for implant cases
Full arch scan speed 9 seconds (versus 22 seconds for the 3Shape E3)
Full arch impressions scan speed 45 seconds
Texture Color
Scanning strategy Die-in-model | Medit T710 Blue Light Dental Scanner
Introducing the New and Improved T-Series Lab Scanners
Medit have completely overhauled the design of their T-Series lab scanners. The result is a sleek and sophisticated dental scanner which not only does its work well, but in style.The Medit T710 desktop scanner is equipped with a fast scan engine and highly efficient software algorithm which work in tandem to produce a full-arch scan in just 8 seconds. The advanced, high-speed positioning system of the new T-Series is designed for optimal performance for your laboratory, speeding up your workflow and increasing productivity.The T710, with its new four 5.0MP-resolution cameras system and blue-light scanning technology, ensures your models and impressions are fully scanned, eliminating all blind spots.Flexible multi-die scanning
2 StepsT710 Specifications
Accuracy 4μm
Full Arch Scan 8 seconds
Full Arch Impression Scan Speed 45 seconds
Colour Texture
Auto-elevation
Let the scanner decide the scanning height for your object with our auto-elevation feature.
Wider Scan Area
Scan more objects at the same time thanks to the wider scan area of our T-Series tabletop scanners!
No Blind Spots
The 4 cameras in the T710 are positioned in a way to ensure that there are no blind spots in your scan data. It only takes one scan to get the full data!
Full-size articulator scanning
To reproduce the exact occlusion orientation, nothing beats scanning the occlusion in the articulator itself. We’ve designed our T-Series to accommodate any articulator available in the market, comfortably.
Replica Denture Included
Orthodontic Scanning Included
Impression Scanning IncludedMedit T710 Blue Light Dental Scanner- ultra-fast scanning of a dental arch in only 8 seconds
- scanning speed for a complete jaw impression is only 45 seconds
- color texture available
- accuracy of 4 µm
- open System
- 5.0 megapixel camera enables high-resolution and detailed scan data
- four-camera system for a large scanning area without blind spots
- automatic height adjustment for optimal scan Position
- flexible multi-die scanning
- complete scan in the articulator possible with the 3-in-1 KAS holding device for KaVo, Artex and SAM
- the AM holding device is compatible with the MARK330 and BIOART A7+ articulators - thus the use of the exocad software is possible
- orthodontic scanning and impression scanning possible
|
Reviews
There are no reviews yet.