CDRPanX features proven Schick CDR digital imaging technology and renders crisp, clinically accurate images
Only slightly more expensive than most film-based systems, CDRPanX eliminates costly panoramic film and processing – increasing your economic efficiency
Eight different imaging modes and three laser alignment beams for optimal exposures
Superior vertical travel allows it to be used with patients of any height, including those in wheelchairs
Patient Positioning: 3 laser alignment beams (mid-sagittal, Frankfort, focal trough) bite guide, chin rest, optional temple support
Specifications
Generator: Multipulse DC
X-Ray Tube: OCX105
Focal spot size: 0.5 IEC 336
Minimum total filtration: 2.5 mm Al
Anode Voltage: 60-86kV (2kV increments)
Anode Current: 4, 5, 6.3, 8, and 10mA
Exposure time: 19s – adult panoramic
Power Supply: 115V, 50/60Hz
Fusing: T8A
Weight: 474lbs
Electrical Safety Classification: Class 1, type B
Imaging modes (Exposure times): adult (19s), child (15s), left half (10s), right half (10s), anterior (8s), TMJ opened and closed (4x4s), frontal sinuses (8s)
Patient Positioning: 3 laser alignment beams (mid-sagittal, Frankfort, focal trough) bite guide, chin rest, optional temple support
Features
CDRPanX features proven Schick CDR digital imaging technology and renders crisp, clinically accurate images
Only slightly more expensive than most film-based systems, CDRPanX eliminates costly panoramic film and processing – increasing your economic efficiency
Eight different imaging modes and three laser alignment beams for optimal exposures
Superior vertical travel allows it to be used with patients of any height, including those in wheelchairs
Schick Technologies has brought digital panoramic imaging to a whole new level of affordability and simplicity.
Caries diagnostic aid for surface caries.
TRIOS 4 has built-in fluorescent technology that aids in the identification of possible caries. Using TRIOS 4, dental professionals can now be aided in the early-detection of surface caries, without the need for an additional scanning device.Caries diagnostic aid for interproximal caries.
TRIOS 4 will also feature a dedicated transillumination smart tip later this year. The smart tip will aid in the identification of possible interproximal caries undetectable to the eye, without emitting radiation.
The GentleWave system is the next evolution in endodontic technology that has transformed an ever-expanding network of progressive practices across the country. The high-tech irrigation process of the GentleWave system harnesses optimized procedure fluids, vortical flow and broad-spectrum acoustic energies to debride and disinfect the root canal system.
The E4 boasts double the speed, double the accuracy, and double as many cameras as its predecessor the E3, delivering improved efficiency and consistency with every scan. From small labs seeking the best-of-the-best, to high-volume, full-service labs striving for a leaner workflow, our E4 lab scanner is the right choice for you.
The LT3 is a beautiful unit with a sleek design. It’s wheels allow it to easily be transported between operating rooms. It can take care of a long list of hard and soft tissue needs, and offers intuitive, user friendly presets to make procedures as streamlined as possible.
iTero HD2.9 simply allows to digitally scan a prepared tooth and wirelessly send this information directly to the dental laboratory for fabrication of a CAD/CAM crown without the gooey mess.
Content
Schick CDR PanX Laser
FeaturesCDRPanX features proven Schick CDR digital imaging technology and renders crisp, clinically accurate images
Only slightly more expensive than most film-based systems, CDRPanX eliminates costly panoramic film and processing – increasing your economic efficiency
Eight different imaging modes and three laser alignment beams for optimal exposures
Superior vertical travel allows it to be used with patients of any height, including those in wheelchairs
Patient Positioning: 3 laser alignment beams (mid-sagittal, Frankfort, focal trough) bite guide, chin rest, optional temple support
SpecificationsGenerator: Multipulse DC
X-Ray Tube: OCX105
Focal spot size: 0.5 IEC 336
Minimum total filtration: 2.5 mm Al
Anode Voltage: 60-86kV (2kV increments)
Anode Current: 4, 5, 6.3, 8, and 10mA
Exposure time: 19s – adult panoramic
Power Supply: 115V, 50/60Hz
Fusing: T8A
Weight: 474lbs
Electrical Safety Classification: Class 1, type B
Imaging modes (Exposure times): adult (19s), child (15s), left half (10s), right half (10s), anterior (8s), TMJ opened and closed (4x4s), frontal sinuses (8s)
Patient Positioning: 3 laser alignment beams (mid-sagittal, Frankfort, focal trough) bite guide, chin rest, optional temple supportFeatures
CDRPanX features proven Schick CDR digital imaging technology and renders crisp, clinically accurate images
Only slightly more expensive than most film-based systems, CDRPanX eliminates costly panoramic film and processing – increasing your economic efficiency
Eight different imaging modes and three laser alignment beams for optimal exposures
Superior vertical travel allows it to be used with patients of any height, including those in wheelchairs
Take your dentistry beyond treatment
Our intraoral scanning solutions allow you to take your dentistry beyond. The new 3Shape TRIOS 4 combines our established superior scanning technology with groundbreaking caries diagnostic aid technology* for both surface and interproximal caries. No additional scanning device needed.Smart tips 3Shape TRIOS 4 Intraoral ScannerThe new generation of TRIOS smart tips feature instant-heat technology for optimized scanning.Be scan-ready in seconds with instant-heat technology.Scan 2-3 times as many patients with instant-heat in combination with 30% more battery life.Optimal scanning due to automatic use counter and tip-change alert.The TRIOS system is a complete in-house ecosystem including a scanner and extensive design software. This means there are plenty of options depending on your needs. Those who are just looking for a scanner and want to utilize labs may look into the basic, cheaper options. Those who want to design crowns, bridges and other prosthetics can opt for design modules. The only missing component is a milling machine, which if you want to mill restorations in-house, will have to be from a third party. This proves to be a weak link in the digital chain.At iDD, we have been using the TRIOS 3 for over four years in our clinic, spending literally thousands of hours learning the workflow. We have carried out all aspects of dentistry using the TRIOS system including same-day crowns, implant surgical guides, implant restorations and digital smile design.Disclaimer: This is an impartial review of the scanner and we do not have any ties to the company. The team at iDD remain unwaveringly committed to providing you with objective and trustworthy information and therefore do not seek any sponsorship. 3Shape kindly loaned us a TRIOS 4 scanner, due to a personal interest in upgrading our older TRIOS 3 model. Our team at iDD are constantly approached by scanner companies to review their scanners and it is always made clear that they will have no part in writing reviews or restricting any conclusions iDD makes in our thorough analysis and clinical use of these products.
Sonendo gentlewave dental laser endodontic root
Sonendo Gentle Wave Dental Laser Endodontic Root Specifications
Manufacturer: Sonendo
Model: Gentle Wave
Serial Number: (Contact Us)
Power Requirements: 100-240V, 50-60Hz
Year: Not available
Laser Style: Cart
Fiber-Optic Trunk Condition:Functional
Laser Type:EndodonticSonendo Gentle Wave Dental Laser Endodontic Root141116 Sonendo 01The GentleWave System gives the clinician options. It can be used either as an adjunct to traditional treatment protocols or as the primary treatment method with “minimum shaping.” Regardless of shaping protocol, the obturation method is performed with the clinician’s preferred technique. Treatment can be simpler, faster, and performed with less iatrogenic potential as GentleWave™ instrumentation protocols can be greatly simplified relative to existing instrumentation concepts. Minimal shaping protocols remove less tooth structure, which could possibly reduce the chance of vertical root fracture while cleaning canals to a degree never before possible. Because it is less technique sensitive, the GentleWave System can contribute to a treatment that may be less stressful and less invasive for the patient.Sonendo’s GentleWave technology is provided by a handpiece connected to a freestanding, ergonomic, mobile console containing a reservoir of sodium hypochlorite, EDTA, and distilled water. The device has a user-friendly interactive screen that guides the clinician through each step sequentially.The GentleWave System automatically cycles the treatment fluids through the device and into the entire canal system in a closed loop environment. As the fluids move through the treatment tip and into the canals, multisonic energy is created. This sonic energy presents in the form of specific wide spectrum wavelengths using different frequencies, aiding greatly in tissue and debris dissolution and removal as well as disinfection of root canals system. Aside from a preoperative system leakage test, at present, the total treatment time is less than 10 minutes.Current methods of endodontic cleaning and shaping are limited, as no current cleaning and shaping technique is able to predictably remove bacteria, biofilm, and tissue from canal systems. In addition, no current instrumentation system touches all canal walls. As a result, bacteria are commonly entombed in the dentinal tubules and isthmuses after endodontic treatment. Today’s “state of the art” is technique-sensitive, operator-sensitive, and greatly affected by anatomic complexity and patient cooperation.1,2Sonendo gentlewave dental laser endodontic rootSonendo Gentle Wave Dental Laser has provided an innovative and unrivaled method designed to create “ultraclean” canals in order to overcome current limitations and challenges. The GentleWave System is capable of removing all tissue, smear layer, biofilm, and bacteria from the tubules to a very deep level that is not typically seen in traditional endodontic treatment.3
3Shape E4 Dental Lab ScannerThe E4 is a dental 3D scanner produced by 3Shape. 3Shape is a 3D scanner manufacturer based in Denmark.E4 dental scanner main features
Full arch scan in 9 seconds
4-micron accuracy
Four 5-MP cameras
Color acquisition
3SHAPE E4
Ultimate productivity with our fastest scanner ever
For those seeking the speed and accuracy to drive lab productivity and growth, look no further. The E4 boasts double the speed, double the accuracy, and double as many cameras as its predecessor the E3, delivering improved efficiency and consistency with every scan. From small labs seeking the best-of-the-best, to high-volume, full-service labs striving for a leaner workflow, our E4 lab scanner is the right choice for you.
4 micron
Scan with an accuracy of 4 microns (ISO 12836) for great case results. Combine this precision with increased speed and you can take on more implant cases, for example.
4 cameras
Four cameras save you time by scanning dies in the model instead of individually. You can even scan impressions instead of producing a gypsum model or combine impression and die at the same time.
5MP cameras
5MP cameras are super high definition cameras. They record 5 megapixel images with enhanced camera sensors, meaning you get superior image clarity and can do high-precision scanning.
HARDWARE SPECIFICS
The E4 is a marriage of iconic 3Shape design and superior technical specifications.
Cameras
Four 5 MP cameras enables efficient die scanning and impression scanning, improving your workflows by saving time
Accuracy
4 microns (ISO 12836), giving you the accuracy and precision you need for implant cases
Full arch scan speed 9 seconds (versus 22 seconds for the 3Shape E3)
Full arch impressions scan speed 45 seconds
Texture Color
Scanning strategy Die-in-model
Dental laser light instruments lite touch LT3 erYAG erbium
Dental Laser Light Instruments Litetouch LT3 ErYAG Erbium Hard and Soft Tissue very lightly used unit is in great shape and comes with the following:• 10x assortment of tips• 2x Hand-pieces• 1x replacement mirrors• 3x safety glasses• Unit and peripherals ie. foot pedal, air hose, power supply unit• One year warranty from Sventech. We will email you the details of this contract and meet in person to sign.• Free installation. One of our technicians will come to your practice and un-box, and set up the unit for you and provide basic operation and maintenance tutorial.The LT3 is a beautiful unit with a sleek design. It’s wheels allow it to easily be transported between operating rooms. It can take care of a long list of hard and soft tissue needs, and offers intuitive, user friendly presets to make procedures as streamlined as possible.We purchased this unit from a Doctor who used the unit very minimally. This unit’s application has around 80,000 pulses which is very low in comparison to units we have seen with pulses in the millions. The unit has passed our inspections, and has had its software upgraded to the newest version. The unit’s power settings have been calibrated. Please copy the link below for a list of features and indications for use. This is a wonderful unit for an amazing price, get it while it is still available. Thank for looking and have a great day!Dental laser light instruments lite touch LT3 erYAG erbiumDental Laser Light Instruments Litetouch is a beautiful unit with a sleek design. It’s wheels allow it to easily be transported between operating rooms. It can take care of a long list of hard and soft tissue needs, and offers intuitive, user friendly presets to make procedures as streamlined as possible.
iTero HD2.9 simply allows to digitally scan a prepared tooth and wirelessly send this information directly to the dental laboratory for fabrication of a CAD/CAM crown – without the gooey mess. The wireless transmission saves shipping time and eliminates distortion that can often be found with traditional stone modelsThe digital scan is, quite literally, digitally perfect. We then deliver the digital scan to our lab where a precision fitting restoration is created.iTero HD2.9 system eliminated the uncomfortable patient experience of traditional impressions, utilizes advanced state of the art digital technology, and provides with superior fitting restorations with little or no adjustmentsiTero Intra-Oral Scanner
Model: HD2.9
2014 Date of Mfg.
Brochure/Video: Click Here
Limited Use
Includes:
iTero Software (pre-loaded)
90 Day Parts Warranty
User Manual(s)
Free Standard Shipping (Commercial USA Addresses)
Its ergonomic design comes with safe docking station. It has thin fiber optic cable which enables quick data transfer from the wand to the cart. This optimized cable length assists various cart positions in the operatory.Orthodontic treatment is more than just straightening teeth; it’s about ensuring your teeth and jaws are in alignment. To achieve this, we need to get an accurate look at where your teeth are positioned. To do this, we use the iTero Intraoral digital scanner.A good impressionIn the orthodontic and dental industries, ‘impressions’ is the term we use for getting a good picture of where your teeth currently sit. These impressions were previously taken using a type of dental cement. Pasted on your teeth, patients were required to lie for a few minutes while the cement-like material set. The dental professional could then remove the set material which had formed an ‘impression’ of your teeth.This process was messy, rather unpleasant and not very comfortable. Fortunately, that method is a thing of the past. These days, we use scanning technology and at L&L Orthodontics, our technology of choice is the iTero Intraoral digital scanner.
What is the iTero scanner?
The iTero scanner is new 3D orthodontic scanning technology. Using the latest developments in intraoral scanning, the iTero scanner accurately scans your teeth as part of your orthodontic assessment. The iTero scanner is made up of a small, wand-like device which is used to scan your teeth and jaws. The data it is collecting then appears on the computer screen, allowing you to see the ‘impressions’ the scanner is taking.The iTero scanner works in with Invisalign®* treatment and lets you see what your teeth will look like post-treatment, even before you’ve started. Before we recommend a course of treatment for you, we’ll take impressions of your teeth using the iTero scanner to ensure we are making our recommendation on accurate information.To find out more about the iTero scanner and other orthodontic technology we use here at L&L Orthodontics, book your specialist consultation today.
Dental Laser Light Instruments Litetouch is a beautiful unit with a sleek design. It’s wheels allow it to easily be transported between operating rooms. It can take care of a long list of hard and soft tissue needs, and offers intuitive, user friendly presets to make procedures as streamlined as possible.
Reviews
There are no reviews yet.