| Content | Schick CDR PanX Laser
FeaturesCDRPanX features proven Schick CDR digital imaging technology and renders crisp, clinically accurate images
Only slightly more expensive than most film-based systems, CDRPanX eliminates costly panoramic film and processing – increasing your economic efficiency
Eight different imaging modes and three laser alignment beams for optimal exposures
Superior vertical travel allows it to be used with patients of any height, including those in wheelchairs
Patient Positioning: 3 laser alignment beams (mid-sagittal, Frankfort, focal trough) bite guide, chin rest, optional temple support
SpecificationsGenerator: Multipulse DC
X-Ray Tube: OCX105
Focal spot size: 0.5 IEC 336
Minimum total filtration: 2.5 mm Al
Anode Voltage: 60-86kV (2kV increments)
Anode Current: 4, 5, 6.3, 8, and 10mA
Exposure time: 19s – adult panoramic
Power Supply: 115V, 50/60Hz
Fusing: T8A
Weight: 474lbs
Electrical Safety Classification: Class 1, type B
Imaging modes (Exposure times): adult (19s), child (15s), left half (10s), right half (10s), anterior (8s), TMJ opened and closed (4x4s), frontal sinuses (8s)
Patient Positioning: 3 laser alignment beams (mid-sagittal, Frankfort, focal trough) bite guide, chin rest, optional temple supportFeatures- CDRPanX features proven Schick CDR digital imaging technology and renders crisp, clinically accurate images
- Only slightly more expensive than most film-based systems, CDRPanX eliminates costly panoramic film and processing – increasing your economic efficiency
- Eight different imaging modes and three laser alignment beams for optimal exposures
- Superior vertical travel allows it to be used with patients of any height, including those in wheelchairs
- Patient Positioning: 3 laser alignment beams (mid-sagittal, Frankfort, focal trough) bite guide, chin rest, optional temple support
Specifications Schick CDR PanX Laser| Generator: | Multipulse DC | | X-Ray Tube: | OCX105 | | Focal spot size: | 0.5 IEC 336 | | Minimum total filtration: | 2.5 mm Al | | Anode Voltage: | 60-86kV (2kV increments) | | Anode Current: | 4, 5, 6.3, 8, and 10mA | | Exposure time: | 19s – adult panoramic | | Power Supply: | 115V, 50/60Hz | | Fusing: | T8A | | Weight: | 474lbs | | Electrical Safety Classification: | Class 1, type B | | Imaging modes (Exposure times): | adult (19s), child (15s), left half (10s), right half (10s), anterior (8s), TMJ opened and closed (4x4s), frontal sinuses (8s) | | Patient Positioning: | 3 laser alignment beams (mid-sagittal, Frankfort, focal trough) bite guide, chin rest, optional temple support |
| Fotona Lightwalker ATS Dental Laser System Multifunctional Medical Laser Fotona LightWalker AT Hard and Soft-Tissue Dental Laser Dual-Wavelength Laser System : 15W 1064nm Nd:YAG + 20W 2940nm Er:YAG Package Includes: - Fotona LightWalker Laser Unit
- Wireless Footswitch
- R21-C2 Fiber Optic Nd:YAG Handpiece
- R21-C3 Fiber Optic Nd:YAG Handpiece
- H02 Tipless Er:YAG Handpiece
- H14 Tipped Er:YAG Handpiece with 4 Tips For Perio, Endo, Hard/Soft Tissue
- PS04 Pixel Structure Er:YAG Handpiece
- Accessories
- 3 Sets of Laser Safety Goggles
- Operators Manual
- 1 Year Warranty
LightWalker AT is the most advanced and highest performance LightWalker model. It comes equipped with high-performance Er:YAG and Nd:YAG lasers, a state-of-the-art OPTOflex articulated arm, an unrivaled 20W of power and Fotona patented QSP pulse technology for ultimate performance and treatment precision LightWalker is the first dental laser system that works with a digitally controlled dental handpiece. Fotona’s revolutionary X-Runner technology, with ultrahigh-precision HDS (High Density Scanning) mode, increases the precision of dental laser treatments by helping to swiftly and accurately guide the laser beam across the treatment area according to perfectly shaped, predefined patterns. LightWalker lasers are designed for ultimate versatility, with one of the most comprehensive lists of clinical applications available on any dental laser. With both tipped and tipless handpieces, your clinical options are endless. LightWalker offers the highest standard of dental treatment, and at the same time simplicity of use in: Conservative Dentistry Endodontics Periodontics Soft-tissue Surgery Implantology Aesthetic Treatments Photobiomodulation. Fast efficient cutting with unmatched patient comfort With the advent of QSP technology and higher output power (several kW), the LightWalker ATS has established a new standard for ablation/cutting speed. This new accelerated cutting speed provides today’s dentists with the speed and precision they demand, while simultaneously increasing patient comfort. Precise tissue surgery with simultaneous disinfection The homogeneous absorption of the Nd:YAG laserin soft tissue results in controlled tissue vaporization with simultaneous coagulation for superior healing and disinfection. Easy-to-use touch screen Fotona Lightwalker ATS Dental Laser System LightWalker has an easy-to–use color touch- screen with an adjustable tilt and 80 customizable presettings that cover more than 40 different applications. Easy access spray/heated water reservoir The integrated spray water container means that you don’t have to rely on any water mains outlet, making your laser system exceptionally mobile and hasslefree. The container is handily located at the back of the system for easy refilling access. Additionally, the water is heated to body temperature, avoiding cold sensitivity reactions during procedures. Patented weightless OPTOflex arm LightWalker’s unique and patented OPTOflex Er:YAG articulated arm is designed to transmit a high-power laser beam to the handpiece, while maintaining the quality of the laser beam to ensure precision and repeatability even at the highest settings. The OPTOflex arm is perfectly balanced during use, making handpieces completely weightless in your hand. OPTOflex allows a full range of motion and maximum degree of control as it makes maneuvering the handpiece much smoother, which improves treatment precision and ease. Wireless footswitch LightWalker also has an optional wireless footswitch that avoids unnecessary tangling of electric cables on your practice floor. | Medit T710 Blue Light Dental Scanner
Introducing the New and Improved T-Series Lab Scanners
Medit have completely overhauled the design of their T-Series lab scanners. The result is a sleek and sophisticated dental scanner which not only does its work well, but in style.The Medit T710 desktop scanner is equipped with a fast scan engine and highly efficient software algorithm which work in tandem to produce a full-arch scan in just 8 seconds. The advanced, high-speed positioning system of the new T-Series is designed for optimal performance for your laboratory, speeding up your workflow and increasing productivity.The T710, with its new four 5.0MP-resolution cameras system and blue-light scanning technology, ensures your models and impressions are fully scanned, eliminating all blind spots.Flexible multi-die scanning
2 StepsT710 Specifications
Accuracy 4μm
Full Arch Scan 8 seconds
Full Arch Impression Scan Speed 45 seconds
Colour Texture
Auto-elevation
Let the scanner decide the scanning height for your object with our auto-elevation feature.
Wider Scan Area
Scan more objects at the same time thanks to the wider scan area of our T-Series tabletop scanners!
No Blind Spots
The 4 cameras in the T710 are positioned in a way to ensure that there are no blind spots in your scan data. It only takes one scan to get the full data!
Full-size articulator scanning
To reproduce the exact occlusion orientation, nothing beats scanning the occlusion in the articulator itself. We’ve designed our T-Series to accommodate any articulator available in the market, comfortably.
Replica Denture Included
Orthodontic Scanning Included
Impression Scanning IncludedMedit T710 Blue Light Dental Scanner- ultra-fast scanning of a dental arch in only 8 seconds
- scanning speed for a complete jaw impression is only 45 seconds
- color texture available
- accuracy of 4 µm
- open System
- 5.0 megapixel camera enables high-resolution and detailed scan data
- four-camera system for a large scanning area without blind spots
- automatic height adjustment for optimal scan Position
- flexible multi-die scanning
- complete scan in the articulator possible with the 3-in-1 KAS holding device for KaVo, Artex and SAM
- the AM holding device is compatible with the MARK330 and BIOART A7+ articulators - thus the use of the exocad software is possible
- orthodontic scanning and impression scanning possible
| QuickRay USB Size 1 And 2 X-Ray Sensor
QuickRay USB is a breakthrough in digital X-rays. The embedded electronics are located in the sensor case so there is no interface box! Simply connect the sensor cable via its USB connector to your computer and go! QuickRay USB is currently compatible with these Apteryx based software systems: XVa3, XVLite, Cliniview, Clinitouch, XDR Imaging, MPDX-DMD, Lightyear, DentiMax, ProfSuni, Dr. Suni, Sigma, AFP Digital and Belmont.Great value QuickRay USB digital X-ray sensors connect directly to USB— no interface box needed!Are you paying too much for digital X-ray sensors and warranties? Consider QuickRay from Video Dental Concepts! A dental imaging leader and innovator since 1989, VDC has provided over 7,000 dental professionals with the best diagnostic imaging values and personalized support for over 20 years.QuickRay USB Size 1 And 2 X-Ray Sensor For SaleQuickRay USB is a breakthrough in digital X-rays. The embedded electronics are located in the sensor case so there is no interface box! Simply connect the sensor cable via its USB connector to your computer and go! QuickRay USB is currently compatible with these Apteryx based software systems: XVa3, XVLite, Cliniview, Clinitouch, XDR Imaging, MPDX-DMD, Lightyear, DentiMax, ProfSuni, Dr. Suni, Sigma, AFP Digital and Belmont.The QuickRay sensor gives you the highest resolution and clarity! The thin (less than 1/4″) intraoral sensors include a CMOS image sensor chip, CsI Scintillator, electronic circuits, shielding foils and shock absorbers. Tough polyamide housings have durable replaceable polyurethane cables with ergonomically placed connectors. Their rounded corners and smooth edges optimize patient comfort.
And QuickRay is the fastest sensor on the market! View X-rays in USB 2.0 High Speed Mode in only 3 seconds. Operate in USB 2.0 Full Speed Mode, if necessary.Every sensor is covered by the VDC two year warranty with no annual fees. Technical support is available for an additional fee on an annual basis. Optional pro rata warranty is available from VDC after purchase. All VDC products are FDA registered. | Biolase EPIC X Diode LaserSurgery, Whitening and Pain Relief — All at Your Fingertips:- Portable for easy transport (no more cords)
- Intuitive procedure based Interface
- Fastest in-office whitening treatment
- ComfortPulse™ technology to limit heat production
- TMJ and pain relief – Exclusive to Epic X!
- Pre-initiated tips for maximum performance with minimum chair time – Exclusive to Epic X!
- Peace of mind, knowing you’re covered with a replacement Epic X within 24 hours should yours need service – Exclusive to Epic X!
Get to Treatment, FasterChoose from standard diode laser tips or our exclusive pre-initiated tips to begin laser therapy faster than ever. Create Bright Smiles, FasterEpic X offers the fastest in-office whitening procedure available today. Faster than ever, with dramatic shade change in 20 minutes of chair time. Provide Pain Relief, FasterEpic X is cleared for temporary relief of minor pain, including pain associated with TMJ or other thermomandibular disorders.
The Epic X diode laser is the premier and most complete diode laser for the whole dental team. | Biolase Epic Pro Dental Soft Tissue LaserThe Epic Pro, which offers the most laser power of any diode laser in dentistry, is the first
product to be introduced resulting from BIOLASE’s strategic development agreement
with IPG Medical. The newest addition to the Epic family of dental soft-tissue lasers, Epic
Pro features several new innovations that are industry-firsts: - A new super pulse technology for more precise, enhanced laser tissue cutting
- Real-time automatic power control to enhance speed and consistency when performing surgery with pre-programed tip temperature
- Pre-initiated, bendable, disposable tips with new smart tip technology to ensure tip performance and quality
Automatic Power Control: Epic Pro cuts four times faster1 than a classic diode laser with
minimal collateral damage. In this treatment mode, the laser in continuous wave mode converts light energy to thermal power at the tip. Laser energy is adjusted automatically in real time to maintain constant tip temperature. The result is extremely consistent and reliable cutting conditions, regardless of speed of movement, tissue type, etc. Super Thermal Pulse: Epic Pro can achieve ten times the peak power of a standard diode (and up to three times that of the closest competitor) laser in short micro-pulses for the highest cutting efficiency and safety. In this treatment mode, the laser converts light energy to thermal power, which it emits as thermal power pulses, (i.e. multiple bursts of high power). Each of these thermal bursts cuts tissue highly efficiently. When the laser is activated, power bursts are emitted with a preset pulse width (duration), while maintaining a precise thermal level at the tip. The laser is powered on only about 3-5% of the time, giving tissue ample time to relax between pulses; creating a safer and gentler experience for patients. 
The Only Laser with Automatic Power ControlEpic Pro is the ONLY FDA-cleared laser with Automatic Power Control, an exclusive innovation from BIOLASE that enables the operator to lase with confidence and speed. 
Enhanced Clinical ApplicationsEpic Pro is the professional’s choice for managing soft tissue cases. With over 20 clinical presets, multiple treatment modes, and an advanced mode for expert users, Epic Pro provides unparalleled consistency and predictability. Unlike traditional diodes, Epic Pro moves quickly and with little snag-and-drag resistance. 
Greater Precision and ComfortEpic Pro brings more precision and comfort than traditional diodes due to innovations such as Super Thermal Pulse mode, which can pulse energy as quickly as ten-millionths of a second, resulting in efficient clinical cutting with less thermal damage than normal diode lasers. 
Introducing Smart Tip TechnologyEpic Pro uses durable new tip technology, available in uninitiated and pre-initiated formats depending on your clinical needs. Epic Pro tips work hand in hand with the laser’s Smart Tip technology to prompt you when a fresh tip is needed. 
With Epic Pro, ‘You Have to See It to Believe It’If you are a current diode laser or CO2 laser user, you have to see Epic Pro cut tissue live and compare to your current laser experience. When current Epic Pro customers were first shown Epic Pro, their response? “You have to see it cut to understand how much faster it is.” Fill out the contact form on this page to request a live demonstration for Epic Pro in your clinic.Technical Specifications Biolase Epic Pro Dental Soft Tissue Laser| Dimension | 7.25in (W) x 4.5in (L) x 6.5in (H) (18.4cm x 11.4cm x 16.5cm) | | Weight | 4 lbs (1.8 kg) | | Operating Voltage | 100V – 240V at 1.2A/0.5A | | Frequency | 50/60 Hz | | Main Control | Power Switch | | Remote Interruption | Remote Interlock | | Disable Control | Emergency Stop Button | | DC Power Supply Module | 12V DC, 5A | | Laser Classification | Class IV (4) | | Medium | Semi-conductor diode | | Wavelength | 940nm ± 20nm | | Power Modes | Continuous, Pulse Modulation | | Fiber Tip Diameter | 300µm, 400µm | | Pulse Duration | 10µm-100ms | | Pulse Interval | 0.01ms – 20ms | | Pulse Repetition Rate | Up to 20kHz (for reference) | | NOHD | 4.77 meters | | Beam Divergence | 0.22 | | Standard Fiber Cable Length | 6 feet (1.8 meters) |
|
Reviews
There are no reviews yet.