| Description | The DWX-4W goes beyond dry milling and is the epitome of wet grinding technology. It uses 4-axis simultaneous movements to wet grind precision inlays, onlays, crowns, veneers and short-span bridges from glass ceramic and composite resins. | Caries diagnostic aid for surface caries.
TRIOS 4 has built-in fluorescent technology that aids in the identification of possible caries. Using TRIOS 4, dental professionals can now be aided in the early-detection of surface caries, without the need for an additional scanning device.
Caries diagnostic aid for interproximal caries.
TRIOS 4 will also feature a dedicated transillumination smart tip later this year. The smart tip will aid in the identification of possible interproximal caries undetectable to the eye, without emitting radiation. | NEW Carestream 8000C Digital Panoramic+Ceph | The new highly accurate 0.5 mm milling tool reliably delivers first class clinical results. Switch to Extra Fine milling mode for a higher level of detail with occlusal fissures and interdental areas on bridges. | The Waterlase express is the all-tissue laser that will change the way you practice dentistry. Waterlase Express has the power to solve dental problems beyond expectation. The versatile and gentle combination of laser energy and water has the power to relieve dental anxiety at the source, for you, your team, and your patients. The countertop all-tissue laser features a miniaturised laser engine that is 50% smaller than the Waterlase iPlus, offering the benefits of all-tissue laser technology in a way that is compact, simple and easy to use. | SuniRay 2 achieves maximal image quality with superior diagnostic capabilities while maintaining the lowest radiation levels among all digital sensors. The comprehensive and feature-rich Prof. Suni Advanced Imaging Software supplements the SuniRay 2’s high-quality imaging with a wide array of user-friendly customization and image-enhancement tools. With the SuniRay 2, Suni has created a complete digital radiography system that seamlessly integrates with your entire practice. |
| Content | Roland DWX-4W Dental Milling Unit
Reliable High PerformanceIn addition to milling on X, Y and Z axes, the DWX-4W rotates pin-type blocks 360 degrees on a fourth axis (A axis) to support undercuts. The ball screw-driven 4-axis control allows for smooth, high-precision machining. The DWX-4W’s high-performance 60,000-RPM Jaeger spindle is known for its reliability and supports precision milling of glass ceramics and composite resin. With its multi-pin clamp, the DWX-4W is a wet dental milling machine that can mill up to three different pin-type materials continuously in one operation. As a result, prosthetics for up to three different patients can be produced in a single production run, saving time, labour and costs.- Simultaneous 4-axis machining
- 4-state Automatic Tool Changer (ATC)
- 60,000 RPM Jaeger DentaDrive Spindle
- CAM software bundled
- Virtual Machine Panel (VPanel)
- Fully-integrated water and coolant filtration system
- Coolant leakage & flow monitoring sensors
- Tool life monitoring
- Mail notification system
Summary Roland DWX-4W Dental Milling Unit• Maximum Convenience
• Virtual Machine Panel
• Progress and Error Alerts for Error-Free Milling
• Coolant Compartment and Water Filtration
• Clean Cutting Area for Precision Milling
• Economical Open Architecture
• CAM Software Included
• Growth Potential
• Peace of MindThe DWX-4W’s high-performance 60 000 RPM Jaeger DentaDrive spindle supports precision milling. It’s equipped to mil pin-type blocks, including glass ceramics and composite resin – acclaimed in the industry for their superior strength and aesthetics. materials can be finished with a short finishing tome, dramatically reducing labour and production time.In addition to milling on X, Y and Z axes, the DWX-4W rotates pin-type blocks 360 degrees on a fourth axis (A axis) to support undercuts, the rigid ball screw-driven 4-axis control allows for smooth, high-precision machining. With its multi-pin clamp, it can mil up to three different pin-type materials continuously, enabling production three different patient prosthetics in a single production run. it also features an Automatic Tool Changer (ATC) that auto-changes grinding burs without interrupting the production process. | 3Shape TRIOS 4 Intraoral ScannerOur most powerful intraoral scanner to date Take your dentistry beyond treatment
Our intraoral scanning solutions allow you to take your dentistry beyond. The new 3Shape TRIOS 4 combines our established superior scanning technology with groundbreaking caries diagnostic aid technology* for both surface and interproximal caries. No additional scanning device needed. Smart tips 3Shape TRIOS 4 Intraoral ScannerThe new generation of TRIOS smart tips feature instant-heat technology for optimized scanning.Be scan-ready in seconds with instant-heat technology.Scan 2-3 times as many patients with instant-heat in combination with 30% more battery life.Optimal scanning due to automatic use counter and tip-change alert.The TRIOS system is a complete in-house ecosystem including a scanner and extensive design software. This means there are plenty of options depending on your needs. Those who are just looking for a scanner and want to utilize labs may look into the basic, cheaper options. Those who want to design crowns, bridges and other prosthetics can opt for design modules. The only missing component is a milling machine, which if you want to mill restorations in-house, will have to be from a third party. This proves to be a weak link in the digital chain.At iDD, we have been using the TRIOS 3 for over four years in our clinic, spending literally thousands of hours learning the workflow. We have carried out all aspects of dentistry using the TRIOS system including same-day crowns, implant surgical guides, implant restorations and digital smile design.Disclaimer: This is an impartial review of the scanner and we do not have any ties to the company. The team at iDD remain unwaveringly committed to providing you with objective and trustworthy information and therefore do not seek any sponsorship. 3Shape kindly loaned us a TRIOS 4 scanner, due to a personal interest in upgrading our older TRIOS 3 model. Our team at iDD are constantly approached by scanner companies to review their scanners and it is always made clear that they will have no part in writing reviews or restricting any conclusions iDD makes in our thorough analysis and clinical use of these products. | Carestream 8000C Digital Panoramic+CephKodak 8000C Digital Pan/Ceph X-Ray - Includes:
- Kodak 8000C Unit (w/ Ceph Arm)
- Acquisition PC
- Imaging Software
- Warranty on unit
- Professionally Crated & Shipped to your commercial address
Buy With Confidence! These units when they arrive at your office:- Includes delivery to your location
- You and your staff will receive basic training
- Twain Driver - Use with any image application
- Easier by Design
"One Shot" CephalometryThe 8000C System is the first digital cephalometry system in the world to expose all standard cephalometric images in a single shot. Until now, digital systems had to scan a patient's head for up to 8 to 18 seconds. But Kodak's innovative one shot technology captures the image in just over a second, drastically reducing the risk of blurred images and significantly improving your patient's comfort.Easier by Design Carestream 8000C Digital Panoramic+CephWith the 8000C System, you perform all of the image programming on your computer, using a clear, user-friendly interface. A series of easy-to-follow steps makes it fast and simple to set all your patient and image parameters, leaving you more time to spend with your patients.Complete Digital Imaging SolutionWith a full range of panoramic and cephalometric imaging capabilities, the 8000C System gives orthodontists, oral and maxillofacial surgeons, and dentists a completely integrated, digital solution for greater ease of use and practice efficiency. In addition to a wide variety of cephalometric options, you can capture TMJ, panoramic, segmented panoramic, and maxillary sinus radiographs.The 8000C System features- One-shot cephalometry for instant image capture
- Comfortable, user-friendly patient positioning
- Dual sensor system
- World-class service & Support
Powerful Processing Made SimpleThe Optional Kodak Carestream Imaging Software Suite makes analysis easier with a number of powerful image-processing capabilities. From contrast and brightness to magnification and full-screen display, you have a full range of tools at your disposal to help you get the most out of your radiographs.Efficient IntegrationThe digital radiographs you acquire with the 8000C System can be integrated into your practice management software, along with cephalometric tracing, treatment planning, and soft tissue morphing modules. And it's easy to share images with coworkers, colleagues, insurance companies, and other organizations, saving time and improving workflow efficiency. | DENTSPLY SIRONA CEREC PRIMEMILLSpeedEngineered for speed and precision, the new CEREC Primemill inherits the proven strength of its predecessor and raises its powerful performance to entirely new heights.You can now mill zirconia restorations in Super Fast milling mode in around 5 minutes, cutting processing times by more than half. The improved grinding mode for high quality glass ceramics also grinds the material faster than ever before. The result? Satisfied patients and high productivity.QualityDENTSPLY SIRONA CEREC PRIMEMILL A combination of new electronics, software, motors and mechanical components contributes to finer resolution and enhanced dynamics. This results in outstanding restoration margins and surface details – for extremely precise results.The new highly accurate 0.5 mm milling tool reliably delivers first class clinical results. Switch to Extra Fine milling mode for a higher level of detail with occlusal fissures and interdental areas on bridges.VersatilityDENTSPLY SIRONA CEREC PRIMEMILL Welcome to a world where you‘re spoiled for choice! The new CEREC Primemill combines wet and dry milling and wet grinding. No matter the indication, with CEREC Primemill you can select from a broad range of material options from validated partners providing the flexibility and predictability you need to offer patients the best possible treatment.Choose from the full spectrum of machining options, including dry and wet milled zirconia, or wet grinding of glass and hybrid ceramics.ConvenienceDENTSPLY SIRONA CEREC PRIMEMILL The new 7” touch interface with user guidance guides operators step-by-step through the workflow, key maintenance procedures and other routine tasks, so you can delegate milling with complete peace-of-mind. The integrated block scanner is a time-saving new feature that automatically scans material blocks with compatible data matrix codes and records the information, including type, size, color and zirconia enlargement factor. All CEREC Primemill tools are fitted with a color-coded RFID chip that is read by the RFID tool reader, feeding into the tool status display, alerting the user if a tool needs replacing. This ensures all tools are performing at optimal levels. A LED light strip indicates unit status and milling and grinding progress.The all-new CERECThe latest generation of our CEREC system sets new standards so you can offer your patients an unmatched combination of single-visit dentistry and excellent quality.A unique solutionThe CEREC system comprises world-class components that interact perfectly ensuring seamless workflows. With CEREC Primescan, CEREC Software 5 and CEREC Primemill, digital chairside dentistry is faster, easier and more reliable than ever before.Outstanding resultsAfter 35 years of continuous optimization, CEREC gives you the options you need to treat multiple indications with the confidence that comes from outstanding results.
Designed to stand out – and fit inThe new CEREC Primemill does not just communicate seamlessly with other CEREC devices, but its sleek design is also the perfect match – and the ideal look for a progressive dental practice. | 2019 BIOLASE Waterlase Express Dental Laser With Hand PieceRestorative
– Cavity Preparations
– Sub-gingival decay removal
– TroughingSoft-Tissue
– Achieving hemostasis
– Frenectomy techniques
– Biopsies and lesionsPerio
– REPAIR Perio protocol (all steps)
– Closed crown lengthening
– Flap surgeryImplant
– REPAIR Implant protocol (all steps)
– Implant debridement
– Flap surgeryEndo
– Access, cleaning, and shaping
– Pulpotomy, Pulp Cap
– Disinfection of Root Canal
– Removal of Smear LayerSpecifications:
– Wavelength: 2.78 µm (2780 nm)
– Max. Power Output: 4 W Pulse
– Energy: 200 mJ Pulse
– Rep Rate: 5-50 Hz Pulse
– Duration: H: 60 µsec, S: 700 µsec
– Laser Engine: Miniaturized Er,Cr:YSGG laser engine
– Fiber Optic Cable: White, highly flexible, reliable
– User Interface: Applications-based, removable tablet
– Touchscreen Size: 9.7”x 6” (24.64cm x 15.24cm)
– Pre-sets: 95 procedural presets, with simple slider bar to adjust settings within each procedure
– Additional Content: Procedure animations, case studies, best practices
– WiFi-enabled for BIOLASE Connect: Yes
– Weight: 27 Lbs (12.247 kg)The Waterlase express is the all-tissue laser that will change the way you practice dentistry. Waterlase Express has the power to solve dental problems beyond expectation. The versatile and gentle combination of laser energy and water has the power to relieve dental anxiety at the source, for you, your team, and your patients. The countertop all-tissue laser features a miniaturised laser engine that is 50% smaller than the Waterlase iPlus, offering the benefits of all-tissue laser technology in a way that is compact, simple and easy to use.2019 BIOLASE Waterlase Express Dental LaserWaterlase Express is the only laser to feature an in-depth, step-by-step, 4K HD animation for every step of every procedure. No matter your level of expertise, from beginner to advanced user, the Waterlase Express animation library is a dazzling, informative training resource.– 95 clinical presets for soft tissue, hard tissue and bone.
– Step-by-step procedure animations.
– Removable tablet with easy-to-use touchscreen interface.
– Loaded system menu features on-board reference material.
– H MODE – 60 microseconds – a cooler mode for cutting enamel and all other applications.
– S MODE – 700 microseconds – a hotter mode for coagulation.
– Stay up-to-date and connect with fellow users, clinical mentors and online training directly from the unit.
– Customer care access for direct help when needed.
– Sturdy handle for easy transport makes the Waterlase express conveniently portable.
– Wireless footswitch for easy integration.
– Light and flexible SureFire trunk fibre ensures minimal resistance and treatment fatigue.
– Over 2 hours of 4K-Ultra-HD learning content | SuniRay 2 Digital Intraoral Sensor Size 1 and Size 2
X-Ray Imaging Properties- Resolution: The pixel resolution of the high resolution (HiRes) sensors exceeds 15 lp/mm. The standard resolution of an X-Ray image, as measured by the modulation transfer function (MTF) exceeds 12 lp/mm. This is measured by using a standard 60 kV intraoral X-ray source.
- Does Efficiency: The sensor will produce a high quality image with an X-Ray dose that is only a fraction of the standard dose required by Dental X-Ray film.
- Diagnostic Efficacy: The system will produce a superior image quality of images obtained when using standard dental X-Ray film. This allows the dentist to diagnose standard intraoral pathologies encountered during screening procedures.
- Wide dynamic range: The sensor pixel well capacity is very high, allowing a higher accommodation of greyscale (bone density) dynamic range.
Sensor Material Biocompatibility SpecificationsThe sensor’s body material and cable material are biocompatible. The sensors and all component materials have been tested to comply with ISO standards, and specifically, the sensor complies with EN IS0-10993 (Biological Evaluation of Medical Devices). | Technical data | Size 1 | Size 2 |
|---|
| Sensor Dimensions (mm) | 39.5 x 26 | 43.5 x 31.5 |
|---|
| Active Area (mm) | 31.1 x 20.2 | 35.2 x 26.2 |
|---|
| Sensor Technology | CMOS APS Fiber Plate | CMOS APS Fiber Plate |
|---|
| Maximum Gray Levels | 4096 | 4096 |
|---|
| Sensor Cable | 3 feet (1m) | 3 feet (1m) |
|---|
| Cable Attachment | Reinforced Strain Relief | Reinforced Strain Relief |
|---|
| USB Module | Integrated USB 2.0 Module | Integrated USB 2.0 Module |
|---|
| Software | Prof. Suni | Prof. Suni |
|---|
X-Ray Imaging Properties SuniRay 2 Digital Intraoral Sensor Size 1 and Size 2- Resolution: The pixel resolution of the high resolution (HiRes) sensors exceeds 15 lp/mm. The standard resolution of an X-Ray image, as measured by the modulation transfer function (MTF) exceeds 12 lp/mm. This is measured by using a standard 60 kV intraoral X-ray source.
- Does Efficiency: The sensor will produce a high quality image with an X-Ray dose that is only a fraction of the standard dose required by Dental X-Ray film.
- Diagnostic Efficacy: The system will produce a superior image quality of images obtained when using standard dental X-Ray film. This allows the dentist to diagnose standard intraoral pathologies encountered during screening procedures.
- Wide dynamic range: The sensor pixel well capacity is very high, allowing a higher accommodation of greyscale (bone density) dynamic range.
|
Reviews
There are no reviews yet.