| Description | QuickScan IOS intraoral scanner is powderless and offers full color digital 3D scans. It is equipped with the latest technology of the new generation of intraoral scanners. Tested by independent labs, it’s accuracy and performance is comparable to other leading scanners but at a fraction of the cost! | The new highly accurate 0.5 mm milling tool reliably delivers first class clinical results. Switch to Extra Fine milling mode for a higher level of detail with occlusal fissures and interdental areas on bridges. | iRay D4 has made life easy for the dental professionals around the world. Dental digital radiography is one of the current armamentarium which has polished the quality of dental treatment procedures. Portable IRAY D4 is now ready to replace the previous versions of intraoral cameras. | The industry’s most cost-effective and user-friendly dental mill, the DWX-4 produces single crowns, copings, bridges and hybrid abutments with precision and ease. The DWX-4 is the ideal device for labs just getting into digital milling or labs that need a second device for urgent jobs. With the DWX-4 dental milling system, you can quickly and economically mill on-demand in a wide variety materials, including the latest hybrid ceramics. | The Identica T300 dramatically improves the fundamental aspects of scanner performance and the latest software technology provides the clearest, sharpest data. Identica T300 is customized to deliver the finest data quality using its dual 2.0 MP cameras. Identica T300 will save valuable time and money by minimizing trial & error when adjusting restoration fits. | Caries diagnostic aid for surface caries.
TRIOS 4 has built-in fluorescent technology that aids in the identification of possible caries. Using TRIOS 4, dental professionals can now be aided in the early-detection of surface caries, without the need for an additional scanning device.
Caries diagnostic aid for interproximal caries.
TRIOS 4 will also feature a dedicated transillumination smart tip later this year. The smart tip will aid in the identification of possible interproximal caries undetectable to the eye, without emitting radiation. |
| Content | QUICKSCAN IOS Full Color Powder Intraoral Scanner
QUICKSCAN IOS Full Color Powderless Accurate, Digital Impression Intraoral ScannerThe QuickScan IOS intraoral scanner is powderless and offers full color digital 3D scans. It is equipped with the latest technology of the new generation of intraoral scanners. Tested by independent labs, it’s accuracy and performance are comparable to other leading scanners but at a fraction of the cost! Benefits QuickScan IOS scans can be viewed in leading software such as 3shape, EXOCAD and Bluesky Bio. Features & Specifications Scanner Size : 240 x 49.5 x 30.5mm Scanner Weight : 210g Distance : 0-17mm Accuracy : 20um Imaging Mode : Synchronous 3D Video Quick Reset : Yes Model Optimization : Yes Warranty: 1 Year Application QuickScan IOS uses an optical scanning method to collect the 3d geometric data of the tooth in the patient's mouth and provide the 3d digital model for CAD/CAM denture design and processing. Features The excellent image quality is based on advanced CMOS technology. The convenient three-zone collection process uses a compact, comfortable, durable scanner head • Easy to use USB 2.0 interface. Standards GB 9706.1-2007 Medical electrical equipment - Part 1: General requirements for safety GB-191-2008 Packaging – Pictorial Marking for Handling of Goods Power 110V-220VAC Classification | Specification Model | Scope of reconstruction | Pixels | | QuickScan I0S-11 | 14 x 14 x 15 mm | 1024 X 768 pixels |
Scanner handpiece QUICKSCAN IOS Full Color Powder Intraoral Scanner The scanner handpiece captures a series of 2D images of the patient anatomy, and constructs a 3D model. The scanner is composed of optical imaging systems. The left end of the handpiece shown below has protective glass. Scanner head： The scanner head is attached to the left end of the handpiece. It is made of plastic, medical steel and a mirror. The scanner head can be sterilized using the prescribed method. Base: Holds the scanner handpiece when not in use. Includes a heater to defog the scanner head. Connects the scanner handpiece and the computer. Cables: White micro-USB cable - Used to transmit the output signal from the scanner handpiece to the base. Black USB 3.0 cable：Used to transmit output signals from the base to the computer. Power Adapter：12V= 1.25A Medical certification power adapter. Technical Specifications: CMOS: 13 x 13mm Pixel Size：1024 X 768 pixels Scope of reconstruction：14 x 14 x 15 mm Intensity of light radiation： ≤ 100mW/cm Size of scanner handpiece including head:244 x 48 x 27mm Micro USB data cable length from handpiece to base: 1.9m USB 3.0 data cable length from base to PC：1.2m PC minimum requirement: OS: Microsoft Windows 10 64bit home or above CPU：Intel i7-6700 Quad-core processor or above Graphics card and video memory: NVIDIA GeForce 960GT or above graphics card, more than 2G *Memory：16G or higher * Display resolution：1920x1080 *USB port： USB2.0/3_0 Equipment operating environment： a} environment temperature：10 ℃ -40℃ - b) Relative humidity：≤ 85%;
c} atmospheric pressure：86KPa~106KPa; Equipment storage, transportation environment: a} environment temperature：-20℃ --55℃ - - b) Relative humidity：10%~93%;
c} atmospheric pressure：86KPa~106KPa; Power - a) Power voltage：110V or 220V
- b) Power consumption：2SVA
Package Contents: | No. | Component | | 1 | Scanner handpiece | | 2 | Scanner head | | 3 | Base | | 4 | Black data cable USB 3.0 | | 5 | White micro USB cable | | 6 | Power adapter（12V） | | 7 | Software on Denterprise USB card | | 8 | User Manual | | 9 | Superdog USB key software license |
| DENTSPLY SIRONA CEREC PRIMEMILLSpeedEngineered for speed and precision, the new CEREC Primemill inherits the proven strength of its predecessor and raises its powerful performance to entirely new heights.You can now mill zirconia restorations in Super Fast milling mode in around 5 minutes, cutting processing times by more than half. The improved grinding mode for high quality glass ceramics also grinds the material faster than ever before. The result? Satisfied patients and high productivity.QualityDENTSPLY SIRONA CEREC PRIMEMILL A combination of new electronics, software, motors and mechanical components contributes to finer resolution and enhanced dynamics. This results in outstanding restoration margins and surface details – for extremely precise results.The new highly accurate 0.5 mm milling tool reliably delivers first class clinical results. Switch to Extra Fine milling mode for a higher level of detail with occlusal fissures and interdental areas on bridges.VersatilityDENTSPLY SIRONA CEREC PRIMEMILL Welcome to a world where you‘re spoiled for choice! The new CEREC Primemill combines wet and dry milling and wet grinding. No matter the indication, with CEREC Primemill you can select from a broad range of material options from validated partners providing the flexibility and predictability you need to offer patients the best possible treatment.Choose from the full spectrum of machining options, including dry and wet milled zirconia, or wet grinding of glass and hybrid ceramics.ConvenienceDENTSPLY SIRONA CEREC PRIMEMILL The new 7” touch interface with user guidance guides operators step-by-step through the workflow, key maintenance procedures and other routine tasks, so you can delegate milling with complete peace-of-mind. The integrated block scanner is a time-saving new feature that automatically scans material blocks with compatible data matrix codes and records the information, including type, size, color and zirconia enlargement factor. All CEREC Primemill tools are fitted with a color-coded RFID chip that is read by the RFID tool reader, feeding into the tool status display, alerting the user if a tool needs replacing. This ensures all tools are performing at optimal levels. A LED light strip indicates unit status and milling and grinding progress.The all-new CERECThe latest generation of our CEREC system sets new standards so you can offer your patients an unmatched combination of single-visit dentistry and excellent quality.A unique solutionThe CEREC system comprises world-class components that interact perfectly ensuring seamless workflows. With CEREC Primescan, CEREC Software 5 and CEREC Primemill, digital chairside dentistry is faster, easier and more reliable than ever before.Outstanding resultsAfter 35 years of continuous optimization, CEREC gives you the options you need to treat multiple indications with the confidence that comes from outstanding results.
Designed to stand out – and fit inThe new CEREC Primemill does not just communicate seamlessly with other CEREC devices, but its sleek design is also the perfect match – and the ideal look for a progressive dental practice. | Dexcowin IRay D4 Dental Handheld X-Ray System
Dexcowin’s iRay D4 is a total dental imaging solution. The iRay D4 comes with an attachable digital sensor, a built in computer for image processing and a 4.8” digital screen so you can see your radiographs live. Diagnosis with a single machine, completely safe and mobile allows imaging on the go. The iRay D4 works with film, digital sensors and PS (photostimulable phosphor) plates. The iRay D4 is wireless, handheld, and completely mobile thus eliminating the need for designated X-ray machine rooms.Dexcowin’s iRay D4 is an all in one solution. It is an x-ray source, a computer, and comes with a high-quality sensor. The iRay D4 can be used as a simple x-ray source when used with film or a sensor attached to a separate computer.The iRay D4 is wireless, handheld, and completely mobile thus eliminating the need for designated X-ray machine rooms. The iRay D4 is perfect for the endodontic who need to surgical procedures in process or mobile dentist practicing in remote locations without computer access.Safety* Safe to hold by hand. 1/7 the radiation exposure then conventional systems.
* Rechargeable Li-poly batteries allow up to 300 images on a single charge.
* Works with any radiographic medium: film, digital sensor, PS plates.
* Operator Safe: Certified as SAFE TO USE BY HANDMobility* The iRay D4 is a complete mobile system. It has an on board computer and a 4.8” screen that allows the doctor to take analyze X-rays with a single piece of equipment.
* There is no need for additional equipment as the iRay D4 comes complete with a high definition sensor.
* The iRay D4 is the most mobile and independent solution on the market today.
* The iRay D4 comes with two rechargeable Li-poly batteries with up to 300 shots on a single charge.
* The iRay D4 also includes wireless transfer to your PC, now take and view your X-rays anywhere!Quality* The iRay D4 gives you more for less than conventional systems. The iRay D4 does not need special construction in terms of shielded rooms, chemical development and dedicating rooms for X-ray.
* The iRay D4 does not require special technical equipment such as computers and additional sensors thereby providing quality all-in-one equipment.
* It allows you to take an x-ray in real time, while you are in the room. This allows the practitioner to provide his customer face to face reassurance while the X-rays and images are taken.Still not convinced? We also offer a 5-jointed stand arm for which you can mount the iRay D systems. Comes fixated to a mobile cart so you still preserve the portable characteristics of the iRay system. With an included remote control, satisfy any operator who still feels uneasiness with being in the same room as an X-ray machine.Digital X-ray Specifications:Dexcowin IRay D4 Dental Handheld X-Ray SystemProduct Name : iRay D4
CPU : 1.6GHz
DISPLAY : 4.8”Touch Panel TFT-LCD (1024×600)
MEMORY : 16GB
EXPOSURE : 0.05 ~ 1.35, 0.01 step
BATTERY : rechargeable 4 cell high capacity battery pack
INTERFACE : USB2.0
Tube Voltage : 60kV(fixed)
Tube Current : 2mA(Fixed)
Focal Spot Size : 0.8mm
Voltage Consumption : 240W Max
Cooling Method : Oil Cooling
Total Filtering : Over 1.5mmAl (inherent filtration : 0.8mmAl, fixed type added filter : 0.7mmAl)
Target Angle : 20°
Time Setting Function : 0.05 ~ 1.35 second (0.01 step)
Main Body Size : 240(L) x 166(W) x 82(H) [mm]
Main Body Weight : 2.4kg
Battery Pack : Cell Material Quality Lithium Polymer
Charging Condition : Charging Current 1A
Temperature Range : 0~40°C
Maximum Current : 18A
Out Voltage : DC 15V
Temperature Range : -20 ~ 60°C | Roland DWX-4 Dental Milling Unit
Digital dental technologies are transforming every aspect of the dental industry, making it easier than ever to produce precise crowns, copings and bridges. The latest technological advancements in scanning, CAD/CAM software and CNC milling allow digital dental labs to deliver custom production with speed and precision and enjoy optimal accuracy and repeatability.The industry’s most user-friendly desktop milling solution, the Roland DWX-4 compact dental mill, is at the forefront of this technological revolution. With the DWX-4, you can mill a single crown or small bridge quickly and economically. Affordably priced, the DWX-4 is ideal for any lab just getting started in digital dentistry or those labs with scanners who no longer wish to outsource production. It’s also the perfect addition to labs that need a second device for urgent jobs. With the DWX-4, these labs can mill a single crown or bridge on demand, without tying up their larger production mills.This affordable, precise 4-axis desktop mill is an ideal choice for labs just getting started in digital dentistry or for those that want to perform smaller, time-urgent jobs (like a single crown or small bridge) without tying up their larger production mills.- Compact design is ideally suited for all lab environments
- 2-station automatic tool changer
- 4-axis simultaneous lead/worm screw driven machining
- Tool diagnostics with tool life management
- Air blower to aid with difficult-to-mill materials
- Negative ion generator for neutralizing static electricity
- Multicast capability for connecting up to four DWX dental mills to one computer
- Color-coded LED light signals machine status
- Automatic calibration
- E-mail notification system
- Dust collection system with airflow sensor
- Virtual panel ensures easy operation
- G-code compatible
- Compatible with industry-standard software
- Open architecture for easy integration into a complete production solution
- CAM software included
The industry’s most cost-effective and user-friendly dental mill, the DWX-4 produces single crowns, copings, bridges and hybrid abutments with precision and ease. The DWX-4 is the ideal device for labs just getting into digital milling or labs that need a second device for urgent jobs. With the DWX-4 dental milling system, you can quickly and economically mill on-demand in a wide variety materials, including the latest hybrid ceramics. | Medit Identica T300 Dental 3D Scanner
Identica T300 to meet all of your needs. With powerful scan engine and affordable pricing, the new Identica T300 is a perfect fit for both performance enthusiasts and entry level users. Its evolutionary design and high tech features will help your lab rediscover productivity. Bundled colLab 2017 scan software makes scan data processing easy and efficient.Quality & affordability- 2.0 MP cameras, Blue LED
- Accuracy : 7 μm (ISO)
- Full arch scan time 24 sec
- 2-Axis Manual
Identica T300 dramatically improves the most important aspects of scanner performance. The latest software technology provides you with the cleanest and sharpest data. T300 is specially designed to bring out the finest data quality using its 2.0 MP cameras. T300 will save your precious time and money by minimizing trial & error to adjust restoration fits.Identica T300 is an upgrade version of Identica Blue, provided at lowest pricing. Giving better value for the affordable scanner users. Identica T300 has enhanced data quality compared to Identica Blue.Introducing the Next Generation of 3D Dental Scanners: Our T-Series Medit represents the apex in 3D dental scanning. With unsurpassed speed, accuracy, and reliability, Medit helps you rediscover your productivity. The T-Series’ new powerful scan engine and affordable pricing are the perfect fit for performance enthusiasts and entry-level users, helping your lab rediscovering productivity thanks to its convenient design and high-tech features. Medit T300 is the latest Medit scanner with an enhanced SW scan. It uses Blue Light technology, which enables quick scanning and provides excellent precision (7μm).The program is user-friendly, because it takes you through simple and fast individual steps, from inserting the model into the scanner to exporting the file to the CAD design program. FEATURES:Medit Identica T300 Dental 3D Scanner- Scanned printing: 2 manual axes.
- Touch sensor: no.
- Full arcade scan speed: 24 ´´
- Resolution of the camera: 2 x 2 MP camera.
- Scan volume: 90 x 72 x 60 mm.
- Scanning principle: Optical change phase.
- Dimensions: 290 x 290 x 340 mm.
- Weight: 12Kg.
- Light source: Blue LED.
- Connectivity: Type USB 3.0 B.
- Power: 100- 240 vac, 50-60 HZ.
- Warranty: 2 years.
ADVANCED DATA PROCESSING AND HIGHER RESOLUTION DUAL CAMERAS The Identica T300 dramatically improves the fundamental aspects of scanner performance and the latest software technology provides the clearest, sharpest data. Identica T300 is customized to deliver the finest data quality using its dual 2.0 MP cameras. Identica T300 will save valuable time and money by minimizing trial & error when adjusting restoration fits. | 3Shape TRIOS 4 Intraoral ScannerOur most powerful intraoral scanner to date Take your dentistry beyond treatment
Our intraoral scanning solutions allow you to take your dentistry beyond. The new 3Shape TRIOS 4 combines our established superior scanning technology with groundbreaking caries diagnostic aid technology* for both surface and interproximal caries. No additional scanning device needed. Smart tips 3Shape TRIOS 4 Intraoral ScannerThe new generation of TRIOS smart tips feature instant-heat technology for optimized scanning.Be scan-ready in seconds with instant-heat technology.Scan 2-3 times as many patients with instant-heat in combination with 30% more battery life.Optimal scanning due to automatic use counter and tip-change alert.The TRIOS system is a complete in-house ecosystem including a scanner and extensive design software. This means there are plenty of options depending on your needs. Those who are just looking for a scanner and want to utilize labs may look into the basic, cheaper options. Those who want to design crowns, bridges and other prosthetics can opt for design modules. The only missing component is a milling machine, which if you want to mill restorations in-house, will have to be from a third party. This proves to be a weak link in the digital chain.At iDD, we have been using the TRIOS 3 for over four years in our clinic, spending literally thousands of hours learning the workflow. We have carried out all aspects of dentistry using the TRIOS system including same-day crowns, implant surgical guides, implant restorations and digital smile design.Disclaimer: This is an impartial review of the scanner and we do not have any ties to the company. The team at iDD remain unwaveringly committed to providing you with objective and trustworthy information and therefore do not seek any sponsorship. 3Shape kindly loaned us a TRIOS 4 scanner, due to a personal interest in upgrading our older TRIOS 3 model. Our team at iDD are constantly approached by scanner companies to review their scanners and it is always made clear that they will have no part in writing reviews or restricting any conclusions iDD makes in our thorough analysis and clinical use of these products. |
Reviews
There are no reviews yet.