| Content | Pollogen Apollo Tripollar LaserPollogen Apollo Tripollar Laser is clinically and histopathologically proven to simultaneously, homogeneously and volumetrically heat both superficial (dermal) and deep (hypodermal) layers while treating the body and Face. The focused RF− due to its high density− enables the use of low energy, thereby providing immediate and long-lasting results.Pollogen Apollo Tripollar LaserThe deep heating encourages the production of collagen and elastin, resulting in tighter and smoother skin. In addition, for the body, heating the fat cells accelerates metabolism and causes them to shrink, resulting in body shaping and minimized cellular appearance.Pollogen Apollo Tripollar Laser Simple to use and remarkably efficient,treatments deliver body shaping, skin tightening, reduction of cellulite and treatment of wrinkles from the first treatment, and long-lasting results after a course of treatments, without surgery or downtime.Inlet Voltage:100-240 Volts, 50-60 Hz, max 2.2A
Mode of Operatrion:TriPollar RF
Maximum output power:50 Watts
Output frequency:1MHz
Output power control:Pulse with modulation(PWM)
Weight:19 kg. (42 lbs.)
Dimensions:W48 cm x D40 cm x H99 cm (W19″ x D16″ x H39″) (with applicator holder)Pollogen Apollo Tripollar Laser energy works by gently heating your lower skin layers without harming your outer layer. The lower layers collagen are heated to increase firmness of long-stranded protein responsible for skin firmness. On heating the collagen strands pull closer helps in tightens the skin. For better and long standing results repeat treatments up-to six weekly treatments are necessary. If you have isolated pockets of fat in the abdomen, thighs, buttocks, etc, you will benefit from TriPollar radio-frequency treatment. The Tripollar Apollo can be used safely on skin of all colors and types.The treatment is painless and pleasant with the temperature capped at 41 degrees. It is based on the next generation bi-polar technology which uses two electrodes, with the current flowing between the two. This allows more focused frequencies and better skin results. TriPollar treatments use three or more electrodes, with the RF energy focused. The focused energy also enables the use of relatively low power for tissue heating, resulting in a safe, pain-free, very pleasant treatment experience. | 2016 LUMENIS LIGHTSHEER DESIRE PERMANENT LASER HAIR REDUCTION2016 Lumenis Lightsheer Desire Permanent Laser Hair Reduction
Great clinical results begin with the LightSheer 805 nm diode laser empowered by two advanced technologies.The Gold Standard in Permanent Laser Hair Reduction
More and more people desire to have permanent hair reduction. They want a treatment that is effective, fast and comfortable. To meet these needs, Lumenis, a leader in laser and energy based technologies, developed the LightSheer DESIRE, the new generation of Laser Hair Reduction systems, so you can grow your business by offering your patients what they DESIRE. The Gold Standard in Permanent Laser Hair Reduction.Included Handpieces:
HS 22×35 mm Spot Size Diode Handpiece
XC 12×12 mm Spot Size Diode HandpieceAlso Includes:
Operator Manual
2 Pair Operator Eyewear
1 Pair Patient Eye Shields
2 KeysSuperior Performance
– Versatile 805nm diode laser
– 2 different Models to select from
– Multiple handpieces with various spot sizes
– 2 advanced technologies
– Upgradable features: add capabilities as your practice grows.Advanced Laser Hair Removal TechnologyGreat clinical results begin with the LightSheer 805 nm diode laser empowered by two advanced technologies:
1. Vacuum Assisted High-Speed Integrated Technology – A large 22×35 mm spot size enables the use of low-fluence and a unique mechanism for pain reduction which provides effective, fast and comfortable treatments for your clients.
2. ChillTip™ Technology – Integrated contact cooling provides epidermal protection for treatment areas requiring precision and higher fluence.Lightsheer Desire Specifications
High Speed (HS) Handpiece
Laser Type:Diode
Wavelength:805 nm
Spot Size:22 x 23 mm
Repetition Rate:Up to 3 Hz
Pulse Repetition:1-3 Pulses
Fluence:4.5-12 J/cm2
Pulse Width:30-400 ms
Peak Power:2310 WXC Handpiece
Laser Type:Diode
Wavelength:805 nm
Spot Size:12 x 12 mm
Repetition Rate:Up to 3 Hz
Pulse Repetition:1 Pulse
Fluence:10-40 J/cm2
Pulse Width:5-400 ms
Peak Power:1920 WLightSheer® DESIREThe starting point to your successMore and more people desire to have permanent hair reduction. They want a treatment that is effective, fast and comfortable.To meet these needs, Lumenis, a leader in laser and energy based technologies, developed the LightSheer DESIRE, the new generation of Laser Hair Reduction system from the LightSheer Family of products, so you can grow your business by offering your patients what they DESIRE. | Alma Opus Plasma Laser RF FractionalAlma Opus Plasma Laser RF Fractional Skin Resurfacing is the first-of-its-kind fractional plasma technology. It represents a new chapter for energy-based devices, addressing global or localized textural and skin quality concerns often corrected with conventional fractional resurfacing lasers in the past.Operating at a high frequency of over 40MHz, the metal pins on the Opus Plasma tips are super-charged with high-voltage. When in close proximity of the skin, the charged pins react to atmospheric pressure in the air, creating plasma that in turn, creates the microthermal zones of fractional injuries.Treatment delivers radio frequency energy at multiple levels to customize a treatment for your specific skincare concerns, using a range of settings to safely and effectively resurface the skin
Able to treat face, neck, decollete, hands, stomachs, etc.INDICATED USES
Fine Lines and wrinkles
Skin laxity
Uneven tone
Unwanted pigmentation
Stretch marks
Acne scarsWHAT IS OPUS PLASMA/HOW DOES IT WORKOpus Plasma represents a new chapter for energy-based devices, addressing global or localized textural and skin quality concerns often corrected with conventional fractional resurfacing lasers in the pastOperating at a high frequency of over 40MHz, the metal pins on the Opus Plasma tips are super-charged with high-voltage
When in close proximity of the skin, the charged pins react to atmospheric pressure in the air, creating plasma that in turn, creates the microthermal zones of fractional injuries
Our Opus treatment delivers radio frequency energy at multiple levels to customize a treatment for your specific skincare concerns, using a range of settings to safely and effectively resurface the skin
Able to treat face, neck, decollete, hands, stomachs, etc.DOES IT HURT/WHAT IS THE DOWNTIMEWe will apply a numbing cream before the treatment to make you as comfortable as possible, but you may still feel mild heat and pressure during the treatment
We also offer and highly recommend a prescription numbing cream
After a consultation, our Nurse will write you a prescription that we call in to Wellspring. This numbing cream is around $40 and allows us to turn up the machine resulting in a much better treatment
Most people tolerate the treatment well
You may experience some redness, but you can go back to your usual routine immediately after the treatment
You will appear to have a sunburn look
Your specialists will talk to you about aftercare at your consultation | LUMENIS ACUPULSE 120 CO2 MACHINE
Includes:
Articulated Arm
2 Acuscan 120 Handpieces
125mm Incisional Handpiece
F-125 Attachments
KeySuperPulseTM TechnologyExceptional ablation/coagulation ratio.
Reach the desired treatment depth with a single pulse.
11 Built-in Treatment Modes.Maximum versatility with only two scanners.
Full parameter control for advanced users.
Short Pulse Duration.Enhanced patient comfort.
Lower chance of side effects.
Intuitive User Interface.Easy setup and quick treatments.
User presets for single-click treatments.11 Treatment Modes For Maximum Versatility
ACUSCAN120 FRACTIONAL SCANNERLUMENIS ACUPULSE 120 CO2 MACHINELaser Type:Co2
Wavelength:10,600 nm
AcuPulse
MultiModeTM SuperPulseTM CO2 Laser
AcuPulse is a complete ablative laser resurfacing workstation, featuring state of the art technology for all aesthetic resurfacing needs.
POWERFUL. VERSATILE. SIMPLE.Superficialfor moderate sun damage, fine lines, uneven texture, dyschromia, actinic keratosis and more.ComboDeep and Superficial combined together for sun damage, acne scars, wrinkles and more.Deepfor deeper lines and wrinkles, acne scars, uneven texture, dyschromia and more.StretchTouchfor skin furrows and textural irregularities.SURGITOUCH ADVANCED SCANNERFeatherTouchfor gental, single scan treatmentsToeTouchfor common foot ailments, such as plantar warts and ingrown toenailsSilkTouchfor more vigorous, double scan treatmentsPaintfor controlled, continous freehand placement on small areasFineTouchfor precise ablation of irregular pigmented lesions at various depths125MM INCISIONAL HANDPIECEBlephfor precise, clean incisions with minimal bleeding.Exceptional Ablation/Coagulation Ratio
When ablation depth is equal, more energy means more excess heat in the tissue. SuperPulse technology enables the deepest penetration with the lowest energy. This reduces patient discomfort, downtime and thermal damages.LUMENIS ACUPULSE 120 CO2 also enables shorter pulses, further enhancing patient safety. | ERCHONIA ZERONA Z5 LASER
The Erchonia Zerona Cosmetic Laser model is designed for use during non-invasive body contouring. It is a body sculpting machine designed to remove fat and contour the body without the invasive surgery that many patients prefer not to go under.Zerona is the only clinically-proven non-invasive body contouring treatment, providing 6 quick & painless treatments. These treatments specifically target stubborn fat areas and painlessly emulsify the fat under your skin using the Lymphatic system.ZERONA is the first non-invasive body slimming procedure to effectively remove excess fat!
Unlike other lipo and body slimming procedures, ZERONA allows patients to continue daily activities without interruptions from surgery, pain, wounds, bruises, or garments. The ZERONA protocol utilizes the Erchonia Laser Scanner, which is the safest and most researched low level laser in the world. ZERONA is also FDA approved for laser assisted liposuction. Find out how it worksVoluminous adipose tissue can appear when fatty material is present, and this, in turn, can bring about enlarged subcutaneous fat regions. Because subcutaneous fat is close to the skin’s surface, laser emulsification can have a dramatic effect on them. The collapse of adipose arrangements has been noted after laser therapy, reducing their volume and providing effective body slimming results. When the fat cells have reduced the body naturally excretes the fat over time giving the patient proven results after around six treatments over two weeks. This occurs during the bodys normal detoxification process.Configuration:5 3b Line Generated Laser Diode Modules
Wavelength:635nm
Modulation:Constant Wave (CW) 1,000 Hz
Programming:5 time saving presets
Display:8″ Full color TFT Touch Screen Control Center
Power Source:100-240VAC 50-60Hz
Chassis:Power Coated metal frame for ease of cleaning
Housing:Thermoformed of Non-allergen material/plastic
Accessories:2 Keys, Laser Safety Glasses
Dimensions:49 x 32 x 57H”
Weight:266 lbs.ERCHONIA ZERONA Z5Let’s take a closer lookERCHONIA ZERONA Z5 LASERFour separate histological studies were performed to assess the efficacy of laser in the emulsification (liquefaction) of fat. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were utilized to analyze adipose tissue. SEM and TEM images revealed the collapse of adipose arrangements subsequent to laser therapy. The voluminous state of an adipocyte cell is reduced due to the emulsification process. The fatty material is evacuated from the cell and moves into extracellular space. The voluminous nature of adipocytes due to the accumulation of fatty material is what gives rise to an enlarged subcutaneous fat region. ZERONA induces the formation of a transitory pore in the membrane of the fat cell. The pore enables the fatty material to seep out across the aperture and into extracellular space. The following images show the result of laser energy on a single fat cell and a group of fat cells.As you can see the ZERONA treatment liquifies the fat and the cell dumps it into the intercellular space. There are two types of fat cells – Subcutaneous and Visceral.Subcutaneous fat is located directly above the skeletal muscle and below the skin. Its superficial placement is what ensures proper depth penetration of the laser energy. Patients containing a high volume of visceral fat (fat below the skeletal muscle) are not ideal candidates for this procedure. However, they may still contain subcutaneous fat; therefore, you can treat the individual by just ensuring they adopt a healthy diet to address the visceral fat. | ACTIVE OPTICAL EXTRA 818 IPL HAIR REMOVAL MACHINEIncludes:
Footswitch
Operators Manual
AntiFreeze Coolant
Patient & Operator EyewearHandpieces:Hair Removal Handpiece and Facial Handpiece
Chilled Tip:Up to 4c
Pulse Interval:0.5~2 Seconds
Output Power:11-31 joule/cm2, upto 4,000W
Cooling System:Revolutionary dual cooling
Control:Intuitive touch screen control
Lamp’s Life Span:250,000 Flashes (Universal), 200,000 Flashes (Facial)
Treatment Area:7.5 cm2 (15*50mm) Universal, 4.5 cm2 (15*30mm) Facial
Wavelength:420-1100 nm
Weight:42Kg (including Stand, if device is not a table top)
Dimensions:44cm x 45cm x 100cm
Extra-818
Skin Rejuvenation
Pigmentation Treatment
Acne Treatment
Hair Removal
Vascular (Facial) TreatmentThe combination of tested treatment protocols with high end engineering makes the Extra – 818 the perfect device for leading clinics.Revolutionary Cooling System
The Extra – 818 has a dual cooling system, controlled and monitored in order to ensure long lifetime to the lamp and a comfortable treatment to the patient.Competitive cooling systems “freeze” the skin so that during the treatment the skin temperature will rise to a bearable level. However, this “freezing” temperature might limit the results because the follicles will not reach the coagulation temperature. To ensure optimal results Active installed a special Processor that prevents overcooling the skin and maintains a uniform low temperature of the “glass” throughout the treatment. This revolutionary system enables the Extra – 818 to provide best results with optimal patient comfort.Research Program ACTIVE OPTICAL EXTRA 818 IPL HAIR REMOVAL MACHINE
For clinical investigations, the self setting program allows researchers to set the treatment’s parameters according to their needs. Allowing advanced research with the device.
The energy levels in the self setting program can reach 31Jcm2 with high intensity of 4,000W.The Active Optical Extra 818 IPL Hair Removal and Skin Rejuvenation is the outcome of more than a decade of treatments and thousands of devices operated worldwide. It contains It contains unique features:
* Contemporary touch screen control
* Built-in Patch Test procedure for examining the optimal energy level
* A stunning number of 450,000 flashes in both lamps.The Extra – 818, based on Active’s GEM-PL technology, sets sets a specific Pulse Pattern according to the selected treatment type, skin color, skin photosensitivity and treatment depth.
The treatment protocols and different pulse patterns take into account the tissue’s TRT (Thermal Relaxation Time) and the combined knowledge accumulated from thousands of treatments done during the years and clinical investigations done to confirm the findings. |
Reviews
There are no reviews yet.