View cart “Medit Identica T300 Dental 3D Scanner For Sale” has been added to your cart.
-32%
Availability: In Stock
Medit Identica Hybrid 3D Dental Scanner For Sale
$10,000.00$6,800.00
Identica Hybrid is our fastest and most accurate scanner. When designing Identica Hybrid we focused on the requirements of your lab to have a precise, fast, and reliable machine that is easy to learn and easy to use.
Other people want this. 15 people have this in their carts right now.
Medit Identica Hybrid 3D dental scanner is fastest and most accurate scanner provides performance speeds of 16 seconds for full arch scans and allows technicians to perform auto double impression scans
With speed, accuracy, and reliability, Medit Identica Hybrid can helps doctor rediscover your productivity with 74% faster scan times, a flexible multi-die that cuts scan steps significantly, color scan texture for enhancing details, and more.
Medit Identica Hybrid 3D dental scanner Benefits:
Very high scan speed;
Flexible multi-die plate for the automatic scan of models and up to eight individual dies in one process;
Three axes and three colour cameras with high resolution – measuring accuracy < 7 µm, automatic scanning of double-phase impressions;
Integrated implant libraries with an optimised matching-process of the scan abutments for highest precision;
Blue light LED scan technology reduces scan time by 74%;
I.M.V (Intelligent Multi View) scan technology – areas that are difficult to capture like e.g. interproximal areas und undercut areas can be scanned safely and fast;
Articulator scan with optionally available articulator plate, therefore no scan fixator required;
Texture scan for the visualisation of markings on the model in the CAD software;
Interface to dds dentalCAD software;
Open system – data output in STL format.
Includes:
Exocad Dental CAD Software
computer, which also has the implant module
scan flags to send out for custom abutments.
cable set; model holder; model plate; multi-die plate; flexible multi-die plate; impression holder; calibration plate; spacer plates and installation CD.
Specifications:
Light source: LED blue light
Camera resolution: Grayscale 1.3 (MP) colour texture
Axis control: 3-axis sync
Scanning area: 80x60x60mm
Dimension: 290x290x342mm
Weight: 13kg
Power: 150w
Interface: USB 3.0 B type
Identica Hybrid Scanner
Improving on earlier generations of Medit scanners, Identica Hybrid puts extreme precision and speed within any laboratory’s budget. Three cameras capture full color, 5 Megapixel images and multi-die scanning provides the capacity to capture a full arch, two partials or up to eight single-unit dies in a single scan, considerably speeding your workflow.
• Full-arch scans in 16 seconds
• Three-axis full-color scanning
• Scan up to 8 single units per scan cycle
Specifications
Light source: LED blue light
Axis control: 3 Axis sync
Scanning area: 80 x 60 x 60 mm
Dimension: 290 x 290 x 342 mm
Weight: 13 kg
Power: 19.5v / 150w
Interface: USB 3.0 B Types
Reviews (0)
Reviews
There are no reviews yet.
Be the first to review “Medit Identica Hybrid 3D Dental Scanner For Sale” Cancel reply
Identica Hybrid is our fastest and most accurate scanner. When designing Identica Hybrid we focused on the requirements of your lab to have a precise, fast, and reliable machine that is easy to learn and easy to use.
The industry’s most cost-effective and user-friendly dental mill, the DWX-4 produces single crowns, copings, bridges and hybrid abutments with precision and ease. The DWX-4 is the ideal device for labs just getting into digital milling or labs that need a second device for urgent jobs. With the DWX-4 dental milling system, you can quickly and economically mill on-demand in a wide variety materials, including the latest hybrid ceramics.
SuniRay 2 achieves maximal image quality with superior diagnostic capabilities while maintaining the lowest radiation levels among all digital sensors. The comprehensive and feature-rich Prof. Suni Advanced Imaging Software supplements the SuniRay 2’s high-quality imaging with a wide array of user-friendly customization and image-enhancement tools. With the SuniRay 2, Suni has created a complete digital radiography system that seamlessly integrates with your entire practice.
The DWX-51D 5-Axis Dental Milling Machine is designed for effortless production of dental prosthetics. Built for precision, error-free milling, you don’t need any machine expertise to operate it. With touch-button controls and automated milling features, the production of high-quality bridges, crowns, inlays, onlays, abutments and other restorations out of 98 mm discs and blocks has been made virtually foolproof.
iTero HD2.9 simply allows to digitally scan a prepared tooth and wirelessly send this information directly to the dental laboratory for fabrication of a CAD/CAM crown without the gooey mess.
The new highly accurate 0.5 mm milling tool reliably delivers first class clinical results. Switch to Extra Fine milling mode for a higher level of detail with occlusal fissures and interdental areas on bridges.
Content
Medit Identica Hybrid 3D Dental Scanner
Medit Identica Hybrid 3D dental scanner is fastest and most accurate scanner provides performance speeds of 16 seconds for full arch scans and allows technicians to perform auto double impression scansWith speed, accuracy, and reliability, Medit Identica Hybrid can helps doctor rediscover your productivity with 74% faster scan times, a flexible multi-die that cuts scan steps significantly, color scan texture for enhancing details, and more.Medit Identica Hybrid 3D dental scanner Benefits:
Very high scan speed;
Flexible multi-die plate for the automatic scan of models and up to eight individual dies in one process;
Three axes and three colour cameras with high resolution – measuring accuracy < 7 µm, automatic scanning of double-phase impressions;
Integrated implant libraries with an optimised matching-process of the scan abutments for highest precision;
Blue light LED scan technology reduces scan time by 74%;
I.M.V (Intelligent Multi View) scan technology – areas that are difficult to capture like e.g. interproximal areas und undercut areas can be scanned safely and fast;
Articulator scan with optionally available articulator plate, therefore no scan fixator required;
Texture scan for the visualisation of markings on the model in the CAD software;
Interface to dds dentalCAD software;
Open system – data output in STL format.
Includes:
Exocad Dental CAD Software
computer, which also has the implant module
scan flags to send out for custom abutments.
cable set; model holder; model plate; multi-die plate; flexible multi-die plate; impression holder; calibration plate; spacer plates and installation CD.
Specifications:
Light source: LED blue light
Camera resolution: Grayscale 1.3 (MP) colour texture
Axis control: 3-axis sync
Scanning area: 80x60x60mm
Dimension: 290x290x342mm
Weight: 13kg
Power: 150w
Interface: USB 3.0 B type
Identica Hybrid ScannerImproving on earlier generations of Medit scanners, Identica Hybrid puts extreme precision and speed within any laboratory’s budget. Three cameras capture full color, 5 Megapixel images and multi-die scanning provides the capacity to capture a full arch, two partials or up to eight single-unit dies in a single scan, considerably speeding your workflow.
Digital dental technologies are transforming every aspect of the dental industry, making it easier than ever to produce precise crowns, copings and bridges. The latest technological advancements in scanning, CAD/CAM software and CNC milling allow digital dental labs to deliver custom production with speed and precision and enjoy optimal accuracy and repeatability.The industry’s most user-friendly desktop milling solution, the Roland DWX-4 compact dental mill, is at the forefront of this technological revolution. With the DWX-4, you can mill a single crown or small bridge quickly and economically. Affordably priced, the DWX-4 is ideal for any lab just getting started in digital dentistry or those labs with scanners who no longer wish to outsource production. It’s also the perfect addition to labs that need a second device for urgent jobs. With the DWX-4, these labs can mill a single crown or bridge on demand, without tying up their larger production mills.This affordable, precise 4-axis desktop mill is an ideal choice for labs just getting started in digital dentistry or for those that want to perform smaller, time-urgent jobs (like a single crown or small bridge) without tying up their larger production mills.
Features and Benefits:Roland DWX-4 Dental Milling Unit
Compact design is ideally suited for all lab environments
Air blower to aid with difficult-to-mill materials
Negative ion generator for neutralizing static electricity
Multicast capability for connecting up to four DWX dental mills to one computer
Color-coded LED light signals machine status
Automatic calibration
E-mail notification system
Dust collection system with airflow sensor
Virtual panel ensures easy operation
G-code compatible
Compatible with industry-standard software
Open architecture for easy integration into a complete production solution
CAM software included
The industry’s most cost-effective and user-friendly dental mill, the DWX-4 produces single crowns, copings, bridges and hybrid abutments with precision and ease. The DWX-4 is the ideal device for labs just getting into digital milling or labs that need a second device for urgent jobs. With the DWX-4 dental milling system, you can quickly and economically mill on-demand in a wide variety materials, including the latest hybrid ceramics.
SuniRay 2 Digital Intraoral Sensor Size 1 and Size 2
X-Ray Imaging Properties
Resolution: The pixel resolution of the high resolution (HiRes) sensors exceeds 15 lp/mm. The standard resolution of an X-Ray image, as measured by the modulation transfer function (MTF) exceeds 12 lp/mm. This is measured by using a standard 60 kV intraoral X-ray source.
Does Efficiency: The sensor will produce a high quality image with an X-Ray dose that is only a fraction of the standard dose required by Dental X-Ray film.
Diagnostic Efficacy: The system will produce a superior image quality of images obtained when using standard dental X-Ray film. This allows the dentist to diagnose standard intraoral pathologies encountered during screening procedures.
Wide dynamic range: The sensor pixel well capacity is very high, allowing a higher accommodation of greyscale (bone density) dynamic range.
Sensor Material Biocompatibility SpecificationsThe sensor’s body material and cable material are biocompatible. The sensors and all component materials have been tested to comply with ISO standards, and specifically, the sensor complies with EN IS0-10993 (Biological Evaluation of Medical Devices).
Technical data
Size 1
Size 2
Sensor Dimensions (mm)
39.5 x 26
43.5 x 31.5
Active Area (mm)
31.1 x 20.2
35.2 x 26.2
Sensor Technology
CMOS APS Fiber Plate
CMOS APS Fiber Plate
Maximum Gray Levels
4096
4096
Sensor Cable
3 feet (1m)
3 feet (1m)
Cable Attachment
Reinforced Strain Relief
Reinforced Strain Relief
USB Module
Integrated USB 2.0 Module
Integrated USB 2.0 Module
Software
Prof. Suni
Prof. Suni
X-Ray Imaging Properties SuniRay 2 Digital Intraoral Sensor Size 1 and Size 2
Resolution: The pixel resolution of the high resolution (HiRes) sensors exceeds 15 lp/mm. The standard resolution of an X-Ray image, as measured by the modulation transfer function (MTF) exceeds 12 lp/mm. This is measured by using a standard 60 kV intraoral X-ray source.
Does Efficiency: The sensor will produce a high quality image with an X-Ray dose that is only a fraction of the standard dose required by Dental X-Ray film.
Diagnostic Efficacy: The system will produce a superior image quality of images obtained when using standard dental X-Ray film. This allows the dentist to diagnose standard intraoral pathologies encountered during screening procedures.
Wide dynamic range: The sensor pixel well capacity is very high, allowing a higher accommodation of greyscale (bone density) dynamic range.
Roland DWX-51D Integrated HD Mill Package
DWX-51D 5-Axis Dental Mill
High Definition Custom CAM Strategy SUM3D
Nabertherm High Speed Auto Cool Zi Furnace
Quatro IVAC Mill Suction
Integration Package for Implant Abutments
Integration Package for up to 60mm disc sizes
Integration Package for HD High Detail End Mills
Start Up Package for Milling Materials
Top To Bottom Mill Training by the Industry Experts
Equipment Set up, IT and Networking Included
Mill Contingency and Loaner ProgramBuilt-to-Last
For thirty years, Roland DG has been the trusted provider of milling machines that are built to last. The DWX-51D 5-Axis Dental Milling Machine is no exception. After extensive research in which lab technicians were asked what they needed in a production mill, the DWX-51D was developed to enhance user experience, maximize ease-of-use and improve output quality. Built with a simple and modern design, the DWX-51D looks as effortless as it operates.Features
5-axis simultaneous operation for non-stop precision milling
Sturdy and efficient ball screw-driven system
New C-clamp for easy adjustment and alignment
10-station Automatic Tool Changer (ATC) for continuous milling
Powerful vacuum and anti-static ionizer for clean calibration and dust reductionThe DWX-51D is designed for effortless, precision production of dental prosthetics fromcopings, crowns and bridges to inlays, onlays and abutments, etc. With a host of automated features and a clean, stable work environment, the DWX-51D is the perfect solution for labs wanting to increase production or those looking to get into digital milling for the first time.
Built-for-You.Built-to-Last.For thirty years, Roland DG has been the trusted provider of milling machines that are built to last. The DWX-51D 5-Axis Dental Milling Machine is no exception. After extensive research in which lab technicians were asked what they needed in a production mill, the DWX-51D was developed to enhance user experience, maximize ease-of-use and improve output quality. Built with a simple and modern design, the DWX-51D looks as effortless as it operates.
Distinguishing Features Roland DWX-51D Dental Milling Unit
5-axis simultaneous milling for precision milling
Steady and efficient ball screw-driven operation
New C-shape clamp for easy adjustment and alignment
10-station Automatic Tool Changer (ATC) for continuous milling
Powerful vacuum and anti-static ionizer for clean calibration and dust reduction
Ultimate Convenience and Ease-of-Use
A variety of new features ensure continuous, user-friendly milling, including
Sturdy frame ensures stability, while slim design fits nearly any lab space
Easy access tool drawer properly stores and protects tools
Color-coded LED status lights signal current job progress
Virtual Machine Panel (VPanel) allows users to configure settings from their computer, send CAM data to the DWX-51D for production, and track milling progress
Easily accessible cutting area for simple tool replacement and cleaning
iTero HD2.9 simply allows to digitally scan a prepared tooth and wirelessly send this information directly to the dental laboratory for fabrication of a CAD/CAM crown – without the gooey mess. The wireless transmission saves shipping time and eliminates distortion that can often be found with traditional stone modelsThe digital scan is, quite literally, digitally perfect. We then deliver the digital scan to our lab where a precision fitting restoration is created.iTero HD2.9 system eliminated the uncomfortable patient experience of traditional impressions, utilizes advanced state of the art digital technology, and provides with superior fitting restorations with little or no adjustmentsiTero Intra-Oral Scanner
Model: HD2.9
2014 Date of Mfg.
Brochure/Video: Click Here
Limited Use
Includes:
iTero Software (pre-loaded)
90 Day Parts Warranty
User Manual(s)
Free Standard Shipping (Commercial USA Addresses)
Its ergonomic design comes with safe docking station. It has thin fiber optic cable which enables quick data transfer from the wand to the cart. This optimized cable length assists various cart positions in the operatory.Orthodontic treatment is more than just straightening teeth; it’s about ensuring your teeth and jaws are in alignment. To achieve this, we need to get an accurate look at where your teeth are positioned. To do this, we use the iTero Intraoral digital scanner.A good impressionIn the orthodontic and dental industries, ‘impressions’ is the term we use for getting a good picture of where your teeth currently sit. These impressions were previously taken using a type of dental cement. Pasted on your teeth, patients were required to lie for a few minutes while the cement-like material set. The dental professional could then remove the set material which had formed an ‘impression’ of your teeth.This process was messy, rather unpleasant and not very comfortable. Fortunately, that method is a thing of the past. These days, we use scanning technology and at L&L Orthodontics, our technology of choice is the iTero Intraoral digital scanner.
What is the iTero scanner?
The iTero scanner is new 3D orthodontic scanning technology. Using the latest developments in intraoral scanning, the iTero scanner accurately scans your teeth as part of your orthodontic assessment. The iTero scanner is made up of a small, wand-like device which is used to scan your teeth and jaws. The data it is collecting then appears on the computer screen, allowing you to see the ‘impressions’ the scanner is taking.The iTero scanner works in with Invisalign®* treatment and lets you see what your teeth will look like post-treatment, even before you’ve started. Before we recommend a course of treatment for you, we’ll take impressions of your teeth using the iTero scanner to ensure we are making our recommendation on accurate information.To find out more about the iTero scanner and other orthodontic technology we use here at L&L Orthodontics, book your specialist consultation today.
DENTSPLY SIRONA CEREC PRIMEMILLSpeedEngineered for speed and precision, the new CEREC Primemill inherits the proven strength of its predecessor and raises its powerful performance to entirely new heights.You can now mill zirconia restorations in Super Fast milling mode in around 5 minutes, cutting processing times by more than half. The improved grinding mode for high quality glass ceramics also grinds the material faster than ever before. The result? Satisfied patients and high productivity.QualityDENTSPLY SIRONA CEREC PRIMEMILL A combination of new electronics, software, motors and mechanical components contributes to finer resolution and enhanced dynamics. This results in outstanding restoration margins and surface details – for extremely precise results.The new highly accurate 0.5 mm milling tool reliably delivers first class clinical results. Switch to Extra Fine milling mode for a higher level of detail with occlusal fissures and interdental areas on bridges.VersatilityDENTSPLY SIRONA CEREC PRIMEMILL Welcome to a world where you‘re spoiled for choice! The new CEREC Primemill combines wet and dry milling and wet grinding. No matter the indication, with CEREC Primemill you can select from a broad range of material options from validated partners providing the flexibility and predictability you need to offer patients the best possible treatment.Choose from the full spectrum of machining options, including dry and wet milled zirconia, or wet grinding of glass and hybrid ceramics.ConvenienceDENTSPLY SIRONA CEREC PRIMEMILL The new 7” touch interface with user guidance guides operators step-by-step through the workflow, key maintenance procedures and other routine tasks, so you can delegate milling with complete peace-of-mind. The integrated block scanner is a time-saving new feature that automatically scans material blocks with compatible data matrix codes and records the information, including type, size, color and zirconia enlargement factor. All CEREC Primemill tools are fitted with a color-coded RFID chip that is read by the RFID tool reader, feeding into the tool status display, alerting the user if a tool needs replacing. This ensures all tools are performing at optimal levels. A LED light strip indicates unit status and milling and grinding progress.The all-new CERECThe latest generation of our CEREC system sets new standards so you can offer your patients an unmatched combination of single-visit dentistry and excellent quality.A unique solutionThe CEREC system comprises world-class components that interact perfectly ensuring seamless workflows. With CEREC Primescan, CEREC Software 5 and CEREC Primemill, digital chairside dentistry is faster, easier and more reliable than ever before.Outstanding resultsAfter 35 years of continuous optimization, CEREC gives you the options you need to treat multiple indications with the confidence that comes from outstanding results.
Designed to stand out – and fit inThe new CEREC Primemill does not just communicate seamlessly with other CEREC devices, but its sleek design is also the perfect match – and the ideal look for a progressive dental practice.
Reviews
There are no reviews yet.