| Description | With Soaric the dentist can keep his eye on everything and the aesthetics of the practice are modernised. Like this, working is fun.Specifications:
– Name: Soaric
– Model: DU-1
– Input voltage: 220/230/240 V AC
– Frequency: 50/60 Hz
– Power consumption: 1,0 kVA
– Seat height: 380 mm bis 800 mm
– Backrest angle: 0° bis 80°
– Weight: ca. 280 kg to 300 kg | The ultimate in ease, material flexibility and unattended production, the DWX-52DC dental milling machine is designed to greatly expand your lab production and profit. Featuring a 6-slot Automatic Disc Changer, 15-station Automatic Tool Changer and other automated features, it gives users of all skill levels an exceptionally powerful, efficient and affordable dental restoration solution. | The 3Shape D710 is optimized for scanning both the impression and gypsum models and enables high throughput for both advanced and standard indications. These innovative scanners are so easy to use that staff training is barely required. Item fixation is fast, and the scan starts with a click on the program. | BRAND NEW 3Shape Trios Cart T12A dental impression intraoral 3D scanner, it is new in the original crate with all accessories including scanner, wand and tips and has never been used. | The Waterlase MD features Hydro- Photonics?a combination of YSGG laser energy and water?which allows the clinician to perform a wide range of conventional procedures with less anesthetic. Known for its precision and accuracy, the MD enables treatment of targeted areas of both tooth structure and soft tissue while maintaining the structural integrity of the tooth and leaving surrounding areas unaffected. | Eco mode
• The unit switches off all unnecessary components in idle mode.
• The unit can be restarted in less than 1 second at any time.
• Consumption of just 10 W in Eco mode compared to 200 W in
standby mode.
The advantages for you:
• Active reduction of lamp wear and tear
• Reduction of operating costs |
| Content | J Morita Soaric Dental Treatment Unit (With chair)A modern dental unit also has to be efficient. Soaric achieves this as the practice owner keeps personnel costs for cleaning and maintenance to a minimum with this new unit. During development, particular attention was paid to ensuring that the treatment unit can be kept hygienic from the outside and serviced precisely and easily from the inside. The vacuum tank with automatic cleaning function at the press of a button also eases everyday working routines. The instrument holders for the dentist and assistant are sterilisable, the ceramic cuspidor is easily and quickly detached and can be thermodisinfected. Sanitation and flushing are also carried out at the press of a button and the automatic processes provide for straightforward and efficient hygiene. The integral anti-suck-back system and the delayed suction stop (prevents contaminated liquid remaining in the tubing) are but two of the intelligent solutions for efficient working.In addition, Soaric can be equipped with the new compactUltramini TwinPowerTurbine and the new Torx SS/SSRMicromotorwith ideal torque values. This new treatment unitisrounded off with PenCure 2000 cordless, especially high-performance LED curing light, which is expandable for single tooth bleaching, as well as an enhanced multifunction syringe for water, air, spray, light and media temperature, but also the new SC-3000 LED ultrasonic scaler with straight forward controls and multiple optional settings.Specifications : J Morita Soaric Dental Treatment Unit (With chair)
– Name: Soaric
– Model: DU-1
– Input voltage: 220/230/240 V AC
– Frequency: 50/60 Hz
– Power consumption: 1,0 kVA
– Seat height: 380 mm bis 800 mm
– Backrest angle: 0° bis 80°
– Weight: ca. 280 kg to 300 kgINTRODUCING THE EXCEPTIONALNew PdW Style – Design and Technology that Puts People First
Morita always puts people first when designing dental treatment chairs. The design for the PdW tray and treatment unit combination, based on natural movement and ease-of-use, promotes smooth, effective, and precise treatment. The microscope and root canal measurement instruments offer a compact design with advanced functions. The micromotor and other instruments also contribute to more comfortable treatment sessions. These are just a few of the advanced technologies and refined design concepts of the Soaric treatment unit that create an environment where people come first.Not only is more and more expected of dentists, but they themselves also place greater demands on their practice equipment. Morita now meets these requirements with Soaric dental treatment unit: It features a wide range of system omponents and its minimised, harmonious design helps create an atmosphere of trust in the dental practice. At the same time, it combines many functions which help ease the clinician’s working day and promote efficient treatment workflow.In order that your treatment can proceed comfortably and efficiently we have created a unit for you that underlines your professionalism and competence. Create a working atmosphere of confidence and safety in your practice with Soaric.Soaric offers a wide range of optional system components for all forms of treatment: Patient chairs with one–piece seat or foldable footrest, swivel arm or suspended tray and lots of other options. | Roland DWX-52DC Dental Milling UnitDWX-52DC
| 5-Axis (Control XYZAB simultaneously) | Milling method：Dry mill | Cuttable material：Zirconia, Wax, PMMA, Composite resin, PEEK, Gypsum | | DWX-52DC | | Cuttable material | Zirconia, Wax, PMMA, Composite resin, PEEK, Gypsum, Fiber reinforced resin, CoCr sinter metal | | Loadable workpiece shape | Step section: | 98.5 mm (diameter), height 10 mm | | Body section: | 95 mm (diameter), height max. 35 mm
Pin diameter: 6 mm | | Pin diameter: | 6 mm | | Loadable workpiece weight | Up to 850 g | | Number of adapters housed | 6 | | Operating speed | XYZ axis: | 0.24 to 70.9 in./min.(6 to 1,800 mm/min.) | | Spindle motor | Brushless DC Motor | | Spindle speed | 6,000 to 30,000 rpm | | Rotary axis travel angle | A: | ±360° | | B: | ±30° | | Number of burs housed | 15 | | Attachable bur | Shank diameter: | 4 mm | | Length: | 40 to 55 mm | | Compatible compressed air | 0.2 MPa | | Interface | USB | | Control command set | RML-1, NC code | | Power requirements | AC 100 V to 240 V ±10%, 50/60 Hz, 2.0 A
(overvoltage category II, IEC60664-1) | | Power consumption | Approx. 200 W | | Operating noise | During operation: | 70 dB (A) or less (when not cutting), | | During standby: | 45 dB (A) or less | | External dimensions | Width x Depth x Height: | 34.6 x 26.0 x 23.6 in. (880 x 660 x 600 mm) | | Weight: | 105 kg (231.5 lbs.) |
The ultimate in ease Roland DWX-52DC Dental Milling Unitmaterial flexibility and unattended production, the DWX-52DCi dental milling machine with automatic disc changer expands your lab production and profit. With a 6-slot Automatic Disc Changer, 15-station Automatic Tool Changer and other automated features, it gives users of all skill levels an exceptionally powerful, efficient and affordable dental restoration solution. | 3shape D710 Dental Scanner3Shape D710 Scanner series can scan gypsum and impression versions. The series scanners can integrate into the clinic with minimum staff training. The scanners provide greater practice productivity, a comprehensive list of signals, and the most extensive 3D scans.Where flexibility and productivity are the key standards 3Shape chain scanners are for medium to large labs.The 3Shape D710 is optimized for scanning both the impression and gypsum models and enables high throughput for both advanced and standard indications. These innovative scanners are so easy to use that staff training is barely required. Item fixation is fast, and the scan starts with a click on the program.3SHAPE D710 For Sale3Shape D700 Scanner is both a scanner and impression scanner in 1 unit. It utilizes three measurement movement and two cameras a laser and creates another pass to especially hone. Just one device can be scanned by the apparatus in under 30 seconds and a whole model in about a minute with a degree of accuracy of 20 microns.Features:
-3-axis motion system
-Red-laser Tech
-Gypsum Version scanning
-Impression scanning Alternative
-Multi-die scanningBenefits:
-Easy operation, extreme Precision, and Rapid Scan
-Enables impressions, deep inlays, and Complete undercuts to scan Efficiently
-Supply labs Using ultra-efficient batches and multi-case processingHigh-speed scanning
The D710 is optimized for scanning gypsum and impression versions and enables high throughput for both advanced and standard indications3Shape – leading impression scanning technologies
3Shape’s patented adaptive scanning technology, combined with the scanner’s 3-axis motion and 2 cameras with reduced angle, facilitate the unique impression scanning capability.Adaptive scanning intelligently detects incomplete areas and automatically builds
adaptive scan sequences for capturing full object geometry. | 3Shape Trios Cart T12a Impression 3D Intraoral Scanner3Shape TRIOS is a next-generation intraoral impression solution that is fast, accurate and easy to use. TRIOS is built on 3Shape’s Ultrafast Optical Sectioning™ technology and its features include high accuracy capture, spray- and powder-free scanning, clinical scan validation, intuitive Smart-Touch user interface, and more. TRIOS is optimized for a wide range of indications.TRIOS scanner benefits and features:
-Up to 1000 3D pictures for true geometries
-Spray-free for optimal accuracy and comfort
-Designed for high-speed impression capture
-Ergonomic grip for perfect control
-Autoclaveable scanner tip
-Scanning has never been easier. No need to hold the scanner at a specific distance or angle for focus. Dentists or assistants can even rest the scanner on the teeth for support as they scan.TRIOS cart benefits and features
-Live 3D visualization
-Easy-to-use touch screen
-Sleek design
-Unique motion sensor interface
-Mobility and Wi-Fi
-Easy-to-clean
-General benefits of digital impression takingDENTISTS:
-Less adjustment and grinding during seating
-Improved accuracy and clinical results
-Faster than traditional impression taking
-Reduced need for retakes
-No impression materials and mess
-Cost savings related to materials and shippingPATIENTS : 3Shape Trios Cart T12a Impression 3D Intraoral Scanner
-Quick and comfortable experience
-Better restoration fits and minimal grinding
-Improved clinical results
-Reduced number of appointments due to fewer retakes
-Reduced over-all chair-time3.5 Tips to Obtaining a Good Scan
PREPARATION
1. Turn on the cart or PC in advance to allow the system to heat up. See section Heating and
Mounting the Scanner Tip, step 1. Allow the system to warm up for about 10 minutes prior to use. If
using the heater, the final temperature is reached when the light goes out.
2. Retract the gingiva around the preparation for the preparation to stand out clearly.
3. Make sure the scanner tip is warm to avoid condensation on the mirror. See section Heating
and Mounting the Scanner Tip, step 5.
SCANNING
1. Dry the teeth lightly using compressed air. Be sure to reach the narrow regions between teeth.
Consider using a saliva ejector and/or tampons.
2. Get a good start:
• Start at preparation (or 1st molar if antagonist).
• Wait for about 5 scanner "clicks" before proceeding (helps build up a good starting point).
• Complete preparation including preparation line.
• Scan neighboring teeth: Occlusion, lingual/palatinal side, buccal/labial side.
3. Keep scanner head at 0-5mm from the teeth, it is OK to touch the teeth occasionally.
4. Move the scanner slowly and smoothly, you should hear a more rapid clicking sound.
41
5. Keep lips, cheeks, and tongue out of the scanner’s view:
• Use your finger or a dental mirror to create space between the teeth, lips and cheeks.
• Use a lip-and-cheek-retractor to keep lips and cheeks away.
• Be careful not to scan your own or assistant’s fingers.
• If you get lips, cheeks or tongue in the scan, make sure to delete it all, especially where they have
contact with the teeth (no surfaces should stick out from the teeth).
6. Keep focus on:
• Option 1 - Look at the teeth while scanning and listen to the "clicks". If it stops clicking/capturing,
carefully move back to the area marked on the screen.
• Option 2 - Look at the 2D image at the lower right corner. What you see here is what you scan.
Avoid lips, cheeks and the tongue to get an easy scan.
7. When scanning is complete, inspect the result by rotating the scan.
The important areas are:
• Preparation line (avoid interference from gingiva, saliva, blood).
• Contact points.
• Occlusal surfaces.
• If an important area is missing, simply touch this area on the model, and re-start scanning from
this point.
8. Bite Scan:
• Start from the second molar or at canine if you make an anterior scan.
• While centering the 2D image on occlusion plane, slowly move the scanner tip in straight mesial
direction with equal coverage of the upper and lower teeth.
• Scan 4 teeth for optimal alignment. This should take no more than 5 seconds.
9. Important for good colors:
• Avoid the light from the dentist chair lamp pointing directly into the patient's mouth. | Biolase Waterlase MDX All Tissue LaserThe MDX delivers 300 mJ of energy at 8 W, and it can easily be upgraded to a 450 mJ (9 W) model for 50% faster cutting as clinical skills improve and applications expand (see ?MDX Specs?). This next-generation of the best-selling WaterLase MD features improvements to the laser engine and delivery system ergonomics, and it enables rapid hardtissue cutting speed with unprecedented affordability.Time-Tested Technology Biolase Waterlase MDX All Tissue LaserThe MDX is built on the technologies and reputations of its predecessors, the BIOLASE WaterLase MD and WaterLase iPlus all-tissue lasers.The Waterlase MD features Hydro- Photonics?a combination of YSGG laser energy and water?which allows the clinician to perform a wide range of conventional procedures with less anesthetic. Known for its precision and accuracy, the MD enables treatment of targeted areas of both tooth structure and soft tissue while maintaining the structural integrity of the tooth and leaving surrounding areas unaffected.The Waterlase MD became the company?s flagship product, breaking new ground in the areas of cutting speed, user interface, and ergonomic design. In 2011 that ?flagship? designation was overtaken by the company?s new WaterLase iPlus, an even faster, more powerful machine. It delivers up to 10 W of power at 600 mJ, which makes it the most powerful laser on the global market at the short pulse length of 50 ?s, all through a highly intuitive preprogrammed user interface for everything from routine restorative cases to specialty periodontal, cosmetic, and endodontic procedures.The iPlus features Biolase?s 2780 nm YSGG technology with the versatility of a dual-wavelength configuration; namely, an integrated iLase 940 nm diode laser to handle unexpected soft-tissue cases, better bleeding control, and the potential for temporary pain relief and teeth whitening. As anticipated, the iPlus proved beneficial for experienced laser dentists who had been anxiously awaiting a machine that would deliver more power, control, and versatility. However, the new laser also provided many of the ?uninitiated? with an easier-than-expected, highly intuitive introduction to all-tissue laser dentistry. The MDX takes this one step further, with a price point that puts the technology within reach of nearly any dentist.
No More Excuses: Affordable Pricing, Substantial ROIThe perception of all-tissue laser technology as inaccessible to most dentists is beginning to dissipate. Even so, some dentists remain unconvinced.The reality, however, is that BIOLASE?s positioning of the MDX as an entry-level product, starting under $40,000, has made the technology much more affordable. Combining better and more efficient manufacturing with strategic sourcing of components results in pricing that most clinicians will view as extremely reasonable. In addition, the initial investment will be recouped with a substantial ROI, which can be realized via 3 main areas of application.1. For hard-tissue restorative dentistry? the ?bread and butter? of general practices?the MDX will enable faster, more efficient and, in most cases, virtually painless restorations for all cavity classes in both adults and children.2. The MDX allows dentists to retain patients who may have traditionally been referred out for osseous crown lengthening. Using the MDX, patients reap the benefits of considerably more comfortable soft-tissue procedures without the inconvenience of a referral, while the practice reaps the benefits of a happier and more loyal patient base.3. MDX provides an effective and efficient gateway into periodontics. Specifically, the MDX promotes deep pocket therapy with new attachment and is especially effective for minimally invasive removal of both subgingival inflamed tissue and calculus in patients with moderate to severe periodontal disease.Another DimensionBIOLASE?s comprehensive in-office and online training and support promise to render the learning curve extremely manageable. And, as intimidation is replaced by both comfort and confidence, clinicians will find that all-tissue laser technology will add a new and profitable dimension to their practices. | BEGO LASERSTAR T DENTAL LABORATORY LASER SYSTEMThe product is a welding unit which is powerful and compact device. The features provided are user friendly of device. The welding energy is controlled with pulse time, adjustable focus and charging voltage provides perfect welding. The control arrangement and the comfortable design help in working suitably and without being tired. The large touch screen color display offers easy operation and intuitive navigation. The product uses pulse shaping for crack-free joints and high strength stress.- Technology:laser
- Applications:dental laboratory
BEGO LASERSTAR T DENTAL LABORATORY LASER SYSTEM Quick and efficient working
With laser welding, you can reduce the time required by up to
80% since solder preparation and the use of welding flux is not
necessary: A soldering model is not required – work can be
conveniently performed directly on the master model.
The advantages for you:
• Time savings with laser welding as a state-of-the-art joining
technology
• Protection of resources since additional soldering materials are
not requiredBEGO LASERSTAR T DENTAL LABORATORY LASER SYSTEM Large colour touch display
The LaserStar T plus is operated and controlled using a 5.7 inch
colour touch display which offers quick response times and
simple menu navigation The large active area of 5.7 inches as
well as the simple menu navigation present a real improvement
in terms of operation compared to more conventional concepts.
The advantage for you:
• Convenient, intuitive operationBEGO LASERSTAR T DENTAL LABORATORY LASER SYSTEM Maximum stability and biocompatibility
Compared to soldered connections, the joints created with deep
welding are high-strength, as well as being mechanically far
more resilient and durable.
By not using base solder, real laser welding enables a homogeneous alloy structure to be created and galvanic corrosion to be
effectively prevented.
The advantage for you:
• Additional safety and reliability for your customers and patientsPrecise welding
The adjustable focus of 0.2 – 2.6 mm ensures high-strength
joints by means of targeted punctual welding, even with thin
orthodontic wires or in interdental spaces.
Regardless of whether bridge or supra constructions: Compared
to soldering, laser welding guarantees far great accuracy of fit.
The advantage for you:
• Perfect welding results for a large range of indicationsEco mode
• The unit switches off all unnecessary components in idle mode.
• The unit can be restarted in less than 1 second at any time.
• Consumption of just 10 W in Eco mode compared to 200 W in
standby mode.
The advantages for you:
• Active reduction of lamp wear and tear
• Reduction of operating costs |
Reviews
There are no reviews yet.