| Description | The Programat CS6, manufactured by Ivoclar Vivadent, is a premium dental combination furnace designed specifically for chairside use. This compact device integrates sintering, crystallization, and glazing processes into a single, high-speed machine. | Advantages:
QTK2 heating muffle with SiC bottom reflector for a homogeneous heat distribution and outstanding firing results;
Automatic temperature calibration (ATK2) with two reference points ensures an very precise calibration;
Vacuum pump control with double-valve technology for low-noise and power-saving operation;
Optical status display (OSD) informs about the actual operational status by using different colours;
Energy-saving technology enables up to 40 % power saving in standby mode;
LAN and USB connections;
Remote diagnosis via data file or internet. | Economical pressing and firing performance. Top quality results. | The Programat S1 is a light-weight and compact sintering furnace for the sintering of frameworks made of IPS e.max ZirCAD and other ZrO2 materials. New with software-version V2.0: “75 minutes is all it takes”!
With the Programat S1, long sintering processes are a thing of the past. It sinters single-tooth frameworks of zirconium oxide material in 75 minutes and zirconium bridge frameworks up to four units in 90 minutes. Conventional sinter furnaces usually take five to eight hours for this process. What does a short sintering process mean for the laboratory? Crowns and bridges with a zirconium oxide framework can be fabricated in one work day (including veneer). The short sintering process does not jeopardize the high material strength and accuracy of fit of the restoration, as scientific investigations have shown. Furthermore, less power is used.
Advantages |
| Content | Ivoclar Vivadent Programat CS6 Furnace
Ivoclar Vivadent Programat CS6 Furnace, you can crystallize and sinter restorations faster than ever before with unsurpassed esthetic results. The dependable technology behind the Programat CS6 ensures that each case is quickly and consistently completed, allowing you to focus on your patients, not your furnace.Speed up your practiceWith our new Programat CS6 combination furnace, you can crystallise and sinter restorations faster than ever before with unsurpassed aesthetic results. The dependable technology behind the Programat CS6 ensures that each case is quickly and consistently completed, allowing you to focus on your patients, not your furnace.New opening mechanismThe new innovative opening mechanism of the Programat CS6 accelerates the pre-drying process, offering further time savings. With the new opening mechanism, the warm air arising from the firing chamber can be used to dry restorations from underneath.Specially developed vacuum technologyThe integrated vacuum technology[1] accelrates the sintering process in the Programat CS6, while enhancing the aesthetics of your zirconia restoration at the same time. Additionally, the vacuum function optimises the crystallisation and glazing process.Advantages - Ivoclar Vivadent Programat CS6 FurnaceFast crystallisation of restorations made of IPS e.max CAD in approx. 11 minutes;
Optional vacuum technology for faster sintering with consistently high aesthetics and optimised crystallisation and glaze firing;
Innovative opening mechanism to accelerate the pre-drying process;
Intuitive operation;
Various firing programmes to refine the restoration quality;
Optical Status Display (OSD) indicates the current operating status at a great distance using different colours;
Option for temperature calibration.Technical data 28.0/41.5 x 49.4 x 45.0 cm closed without/with storage shelf, 41.5 x 49.4 x 57.3 cm open with storage shelf; 110-240 V, 50/60 Hz; current consumption max. 9-16 A; power consumption max. 1650 W; combustion chamber ø 55 mm, height 40 mm; combustion temperature max. 1560 °C; 28.5 kg.Delivery includesProgramat CS6 complete with mains cable; vacuum tube; Speed Crystallization Tray; tweezers; temperature control set starter kit; network cable; WiFi kit; Digital Shade Assistant holder kit; A-D shade guide and accessories. | Ivoclar Vivadent Programat CS2 Glazing
The second generation of the Programat CS series is the ideal ceramic and crystallization furnace for dentists.The device has been specially developed for the crystallization of IPS e.max CAD restorations. The Programat CS2 is easily operated by means of the new colour touch screen and the proven membrane-sealed keypad. It is furthermore equipped with 20 individual programs as well as predefined Ivoclar Vivadent programs, such as the Speed program, which crystallizes IPS e.max CAD restorations in less than 15 minutes.The QTK2 muffle technology is responsible for even more homogeneous heat distribution in the firing chamber, leading to optimum firing results and a prolonged life cycle of the heating element. Additionally, the new vacuum pump control system with double valve technology ensures noiseless and power-saving operation of the vacuum pump.Advantages:
Colour touch screen and proven membrane-sealed keypad
QTK2 muffle technology with SiC bottom reflector
Easy operation; specially developed for use in the dental practice
Automatic double-range temperature calibration (ATK2)
Remote diagnostics via Internet, e-mail and data log files
Software updates via USB flash drive
Power-saving technology
OSD display
Integrated tong holder
Double valve vacuum technology2015 Ivoclar Vivadent Programat CS2 GlazingSpecifically for the crystallisation of IPS e.max CAD restorations. With colour touch display and membrane keypad. Apart from the already installed Ivoclar Vivadent programs another 20 individual programs are available. Included is among others a speed program that will crystallise IPS e.max CAD restorations in less than 15 minutes.Advantages:
QTK2 heating muffle with SiC bottom reflector for a homogeneous heat distribution and outstanding firing results;
Automatic temperature calibration (ATK2) with two reference points ensures an very precise calibration;
Vacuum pump control with double-valve technology for low-noise and power-saving operation;
Optical status display (OSD) informs about the actual operational status by using different colours;
Energy-saving technology enables up to 40 % power saving in standby mode;
LAN and USB connections;
Remote diagnosis via data file or internet.
Technical data:
32.0 x 46.5 x 32.0 cm without object tray, 39.0 x 46.5 x 32.0 cm with object tray; 200-240 V, 50/60 Hz; power input max. 8,5 A; firing temperature max. 1200 °C; firing chamber ø 90 mm, height 80 mm; 15.6 kg. | Ivoclar Vivadent Programat EP 3010Programat EP 3010The Programat EP 3010 is characterized by cost effectiveness and high-quality press and firing results. In addition, the Programat EP 3010 is optimally coordinated with Ivoclar Vivadent press ceramic materials such as IPS e.max Press.In comparison to its predecessor model EP 3000, the operation of the Programat EP 3010 has become even simpler due to the new colour touch display, the modern icons, the intuitive menu-based navigation and the proven membrane-sealed keypad.The new QTK2 heating muffle in combination with the SiC bottom reflector ensures homogeneous heat distribution in the firing chamber. As a result, the investment ring is preheated more evenly and reliably. Furthermore, these features enable the user to press difficult-to-press objects, e.g. with very thin marginal areas, and to achieve even higher quality results.The electronic press drive with force sensor ensures the precise control of the press plunger in the micrometre range. The integrated Crack Detection System (CDS) immediately interrupts the press process if a crack in the investment ring occurs. Therefore, restorations are optimally protected. Advantages:- Programs are optimally coordinated with Ivoclar Vivadent materials.
- QTK2 muffle technology with SiC bottom reflector for homogeneous heat distribution.
- Colour touch screen and proven membrane-sealed keypad for easy operation.
- Electronic press drive with force sensor produces high-quality press results. No compressed air connection required.
- Crack Detection System detects cracks in the investment ring.
- Easy and automatic temperature calibration at two reference points (ATK2).
- Simple software update via USB flash drive.
- Remote diagnosis function via data file for optimum support by a service centre.
- Broad range of programs: 300 individual firing and 20 individual press programs.
- Power Saving Technology for power-saving operation.
| Ivoclar Vivadent Programat S1
Single-tooth frameworks can be sintered in 75 minutes and bridge frameworks in 90 minutes
Speed programs for full anatomic restorations with higher translucency
Simple and language-independent operation thanks to the proven combination of membrane-sealed keypad and graphic display
Power Saving Technology: Compared with conventional sintering furnaces, up to 64% of the energy is saved with one sintering process
Compact design based on the Programat platform
Only 28 kg
Calibration possibility
OSD operating status display
Comfortable loading of the sintering chamber thanks to the furnace head tilting upwards
Removable furnace head for maintenance purposes
USB connection – easy software updates
Remote control via PC/laptop by means of PrograBase2 softwareIvoclar Vivadent Programat S1The Programat S1 is a light-weight and compact sintering furnace for the sintering of frameworks made of IPS e.max ZirCAD and other ZrO2 materials. New with software-version V2.0: “75 minutes is all it takes”!
With the Programat S1, long sintering processes are a thing of the past. It sinters single-tooth frameworks of zirconium oxide material in 75 minutes and zirconium bridge frameworks up to four units in 90 minutes. Conventional sinter furnaces usually take five to eight hours for this process. What does a short sintering process mean for the laboratory? Crowns and bridges with a zirconium oxide framework can be fabricated in one work day (including veneer). The short sintering process does not jeopardize the high material strength and accuracy of fit of the restoration, as scientific investigations have shown. Furthermore, less power is used.
AdvantagesExceptional efficiency
For the laboratory, a short sintering process means that a higher level of efficiency can be achieved. Crowns and bridges with a zirconium oxide framework (including a veneer) can be fabricated within one working day. The short sintering process does not jeopardize the high material strength and accuracy of fit of the restoration, as scientific research has proven. Moreover, a lower power consumption is needed.Programat Dosto-Tray:
With the Programat Dosto Tray, the sintering capacity can be increased by up to 40% compared with the standard sinter tray. In this way, the sinter furnace is even more efficient in the dental laboratory. |
Reviews
There are no reviews yet.