A world-class, combined automatic dental autoclave unit specifically designed to perform cleaning (internal and external), lubrication, and sterilization of dental handpieces in a single integrated cycle.
Other people want this. 15 people have this in their carts right now.
Dentsply Sirona DAC Universal S system helps you to comply with stringent infection control standards at the touch of a button. Offering all-round protection for your patients and teams, this versatile decontamination solution will ensure you always have sterilised and reprocessed instruments that you can trust. From sonic handpieces and turbines to nozzles and tips, this DAC will have all of your most critical instruments sterilised and ready for use in just 21 minutes.
Features
Ease of use
New design, touch display with intuitive user interface, guided maintenance workflow Check & Clean.
Fully automatic reprocessing
Six instruments in approx. 21 minutes; internal and external cleaning, lubrication (if needed) and sterilization of straight and contra-angle handpieces, turbines, ultrasonic / sonic handpieces and tips, nozzles of multifunctional syringes and powder jet devices as well as powder jet handpieces.
Cost-effective and environmentally friendly reprocessing
Low operating and consumption costs – no use of cleaning and disinfection chemicals and only up to 900 ml water consumption per cycle. Low investment costs in instruments thanks to cooling at the end of the process and therefore quick return to service.
Legal certainty
Cleaning and sterilization process which can be validated. Cleaning process in accordance with EN ISO 15883-1 / -2*. Sterilization process in accordance with EN ISO 13060* and ISO 17665-1. Routine Control with chemical indicator class 5 and PCD (Process Challenge Device).
Technical Data
Power supply: 200 – 240V AC, 50/60Hz
Consumption: 1.3kW
Compressed air connection: inlet pressure 5.0 – 8.0 bar
Short-term air consumption: 60 NI/min. at 5 bar
Oil canister capacity: 0.2L
Water tank capacity: 2.3L
Water consumption: approximately 900ml/cycle (Pink Lid program)
Water quality: < 3 μS / cm
Dimensions with lid open (H x W x D): 59 x 40 x 42cm
Dimensions with lid closed (H x W x D): 40 x 40 x 42cm
Capacity: up to 6 instruments
Weight: 26kg
Minimum distance from the wall: 10cm
Minimum distance from the ceiling: 70cm
Reviews (0)
Reviews
There are no reviews yet.
Be the first to review “Dentsply Sirona DAC Universal S” Cancel reply
A world-class, combined automatic dental autoclave unit specifically designed to perform cleaning (internal and external), lubrication, and sterilization of dental handpieces in a single integrated cycle.
The DWX-4W goes beyond dry milling and is the epitome of wet grinding technology. It uses 4-axis simultaneous movements to wet grind precision inlays, onlays, crowns, veneers and short-span bridges from glass ceramic and composite resins.
iTero HD2.9 simply allows to digitally scan a prepared tooth and wirelessly send this information directly to the dental laboratory for fabrication of a CAD/CAM crown without the gooey mess.
A true open architecture system, the compact DWX-50 integrates with industry standard 3D scanners, computers and all popular CAD/CAM software to provide a very cost-effective production solution. Advanced communications tools and operating features allow the DWX-50 to mill unattended while providing confidence in the finished product to the lab technician.
SuniRay 2 achieves maximal image quality with superior diagnostic capabilities while maintaining the lowest radiation levels among all digital sensors. The comprehensive and feature-rich Prof. Suni Advanced Imaging Software supplements the SuniRay 2’s high-quality imaging with a wide array of user-friendly customization and image-enhancement tools. With the SuniRay 2, Suni has created a complete digital radiography system that seamlessly integrates with your entire practice.
The new highly accurate 0.5 mm milling tool reliably delivers first class clinical results. Switch to Extra Fine milling mode for a higher level of detail with occlusal fissures and interdental areas on bridges.
Dentsply Sirona DAC Universal S system helps you to comply with stringent infection control standards at the touch of a button. Offering all-round protection for your patients and teams, this versatile decontamination solution will ensure you always have sterilised and reprocessed instruments that you can trust. From sonic handpieces and turbines to nozzles and tips, this DAC will have all of your most critical instruments sterilised and ready for use in just 21 minutes.FeaturesEase of use
New design, touch display with intuitive user interface, guided maintenance workflow Check & Clean.Fully automatic reprocessing
Six instruments in approx. 21 minutes; internal and external cleaning, lubrication (if needed) and sterilization of straight and contra-angle handpieces, turbines, ultrasonic / sonic handpieces and tips, nozzles of multifunctional syringes and powder jet devices as well as powder jet handpieces.Cost-effective and environmentally friendly reprocessing
Low operating and consumption costs – no use of cleaning and disinfection chemicals and only up to 900 ml water consumption per cycle. Low investment costs in instruments thanks to cooling at the end of the process and therefore quick return to service.Legal certainty
Cleaning and sterilization process which can be validated. Cleaning process in accordance with EN ISO 15883-1 / -2*. Sterilization process in accordance with EN ISO 13060* and ISO 17665-1. Routine Control with chemical indicator class 5 and PCD (Process Challenge Device).Technical DataPower supply: 200 – 240V AC, 50/60Hz
Consumption: 1.3kW
Compressed air connection: inlet pressure 5.0 – 8.0 bar
Short-term air consumption: 60 NI/min. at 5 bar
Oil canister capacity: 0.2L
Water tank capacity: 2.3L
Water consumption: approximately 900ml/cycle (Pink Lid program)
Water quality: < 3 μS / cm
Dimensions with lid open (H x W x D): 59 x 40 x 42cm
Dimensions with lid closed (H x W x D): 40 x 40 x 42cm
Capacity: up to 6 instruments
Weight: 26kg
Minimum distance from the wall: 10cm
Minimum distance from the ceiling: 70cm
Reliable High PerformanceIn addition to milling on X, Y and Z axes, the DWX-4W rotates pin-type blocks 360 degrees on a fourth axis (A axis) to support undercuts. The ball screw-driven 4-axis control allows for smooth, high-precision machining. The DWX-4W’s high-performance 60,000-RPM Jaeger spindle is known for its reliability and supports precision milling of glass ceramics and composite resin. With its multi-pin clamp, the DWX-4W is a wet dental milling machine that can mill up to three different pin-type materials continuously in one operation. As a result, prosthetics for up to three different patients can be produced in a single production run, saving time, labour and costs.
Features and Benefits:
Simultaneous 4-axis machining
4-state Automatic Tool Changer (ATC)
60,000 RPM Jaeger DentaDrive Spindle
CAM software bundled
Virtual Machine Panel (VPanel)
Fully-integrated water and coolant filtration system
Coolant leakage & flow monitoring sensors
Tool life monitoring
Mail notification system
Summary Roland DWX-4W Dental Milling Unit
• Maximum Convenience
• Virtual Machine Panel
• Progress and Error Alerts for Error-Free Milling
• Coolant Compartment and Water Filtration
• Clean Cutting Area for Precision Milling
• Economical Open Architecture
• CAM Software Included
• Growth Potential
• Peace of MindThe DWX-4W’s high-performance 60 000 RPM Jaeger DentaDrive spindle supports precision milling. It’s equipped to mil pin-type blocks, including glass ceramics and composite resin – acclaimed in the industry for their superior strength and aesthetics. materials can be finished with a short finishing tome, dramatically reducing labour and production time.In addition to milling on X, Y and Z axes, the DWX-4W rotates pin-type blocks 360 degrees on a fourth axis (A axis) to support undercuts, the rigid ball screw-driven 4-axis control allows for smooth, high-precision machining. With its multi-pin clamp, it can mil up to three different pin-type materials continuously, enabling production three different patient prosthetics in a single production run. it also features an Automatic Tool Changer (ATC) that auto-changes grinding burs without interrupting the production process.
iTero HD2.9 simply allows to digitally scan a prepared tooth and wirelessly send this information directly to the dental laboratory for fabrication of a CAD/CAM crown – without the gooey mess. The wireless transmission saves shipping time and eliminates distortion that can often be found with traditional stone modelsThe digital scan is, quite literally, digitally perfect. We then deliver the digital scan to our lab where a precision fitting restoration is created.iTero HD2.9 system eliminated the uncomfortable patient experience of traditional impressions, utilizes advanced state of the art digital technology, and provides with superior fitting restorations with little or no adjustmentsiTero Intra-Oral Scanner
Model: HD2.9
2014 Date of Mfg.
Brochure/Video: Click Here
Limited Use
Includes:
iTero Software (pre-loaded)
90 Day Parts Warranty
User Manual(s)
Free Standard Shipping (Commercial USA Addresses)
Its ergonomic design comes with safe docking station. It has thin fiber optic cable which enables quick data transfer from the wand to the cart. This optimized cable length assists various cart positions in the operatory.Orthodontic treatment is more than just straightening teeth; it’s about ensuring your teeth and jaws are in alignment. To achieve this, we need to get an accurate look at where your teeth are positioned. To do this, we use the iTero Intraoral digital scanner.A good impressionIn the orthodontic and dental industries, ‘impressions’ is the term we use for getting a good picture of where your teeth currently sit. These impressions were previously taken using a type of dental cement. Pasted on your teeth, patients were required to lie for a few minutes while the cement-like material set. The dental professional could then remove the set material which had formed an ‘impression’ of your teeth.This process was messy, rather unpleasant and not very comfortable. Fortunately, that method is a thing of the past. These days, we use scanning technology and at L&L Orthodontics, our technology of choice is the iTero Intraoral digital scanner.
What is the iTero scanner?
The iTero scanner is new 3D orthodontic scanning technology. Using the latest developments in intraoral scanning, the iTero scanner accurately scans your teeth as part of your orthodontic assessment. The iTero scanner is made up of a small, wand-like device which is used to scan your teeth and jaws. The data it is collecting then appears on the computer screen, allowing you to see the ‘impressions’ the scanner is taking.The iTero scanner works in with Invisalign®* treatment and lets you see what your teeth will look like post-treatment, even before you’ve started. Before we recommend a course of treatment for you, we’ll take impressions of your teeth using the iTero scanner to ensure we are making our recommendation on accurate information.To find out more about the iTero scanner and other orthodontic technology we use here at L&L Orthodontics, book your specialist consultation today.
The compact DWX-50 combines 5-axis simultaneous machining capability and a five-station automatic tool changer to deliver advanced features at a very affordable price point. Designed specifically for dental labs and technicians, the user-friendly DWX-50 allows for clean, quiet operation and the quality production of complex dental arches, abutments, bridges, copings and crowns from zirconia, wax and PMMA. Equipped with an integrated air blower and dust collection system, the DWX-50 ensures protection of moving parts while maintaining a clean, safe environment. Built on open technology, the DWX-50 supports a wide range of industry standard CAD/CAM software and tools, allowing for easy integration with popular commercially available dental prosthetic production solutions.5-axis simultaneous machiningCapable of 5-axis simultaneous machining, the DWX-50 supports the production of high-quality dental prosthetics at an affordable price point. The DWX-50 is designed to mill on X, Y and Z axes, rotating blocks and discs of material 360 degrees in both clockwise and counterclockwise movements, as well as tilting materials forward and backward 20 degrees to support complex cuts.Five-station automatic tool charger Roland DWX-50 5-Axis Dental Milling MachineThe five-station Automatic Tool Changer (ATC) with a tool length sensor enables the user to run multiple tools for one job or an entire disc unattended. Instead of inspecting finished pieces to determine if everything was milled correctly, the integrated tool diagnostics feature will notify users if a tool was broken prior to completion, resulting in reduced time and wasted materials.Taking control of prosthesis productionWith its unmatched ease of use and short learning time, the DWX-50 provides a cost-effective solution that is ideal for dental labs wishing to take control of the production process while avoiding the long lead times and costs associated with outsourcing.A true open architecture system, the compact DWX-50 integrates with industry standard 3D scanners, computers and all popular CAD/CAM software to provide a very cost-effective production solution. Advanced communications tools and operating features allow the DWX-50 to mill unattended while providing confidence in the finished product to the lab technician.
SuniRay 2 Digital Intraoral Sensor Size 1 and Size 2
X-Ray Imaging Properties
Resolution: The pixel resolution of the high resolution (HiRes) sensors exceeds 15 lp/mm. The standard resolution of an X-Ray image, as measured by the modulation transfer function (MTF) exceeds 12 lp/mm. This is measured by using a standard 60 kV intraoral X-ray source.
Does Efficiency: The sensor will produce a high quality image with an X-Ray dose that is only a fraction of the standard dose required by Dental X-Ray film.
Diagnostic Efficacy: The system will produce a superior image quality of images obtained when using standard dental X-Ray film. This allows the dentist to diagnose standard intraoral pathologies encountered during screening procedures.
Wide dynamic range: The sensor pixel well capacity is very high, allowing a higher accommodation of greyscale (bone density) dynamic range.
Sensor Material Biocompatibility SpecificationsThe sensor’s body material and cable material are biocompatible. The sensors and all component materials have been tested to comply with ISO standards, and specifically, the sensor complies with EN IS0-10993 (Biological Evaluation of Medical Devices).
Technical data
Size 1
Size 2
Sensor Dimensions (mm)
39.5 x 26
43.5 x 31.5
Active Area (mm)
31.1 x 20.2
35.2 x 26.2
Sensor Technology
CMOS APS Fiber Plate
CMOS APS Fiber Plate
Maximum Gray Levels
4096
4096
Sensor Cable
3 feet (1m)
3 feet (1m)
Cable Attachment
Reinforced Strain Relief
Reinforced Strain Relief
USB Module
Integrated USB 2.0 Module
Integrated USB 2.0 Module
Software
Prof. Suni
Prof. Suni
X-Ray Imaging Properties SuniRay 2 Digital Intraoral Sensor Size 1 and Size 2
Resolution: The pixel resolution of the high resolution (HiRes) sensors exceeds 15 lp/mm. The standard resolution of an X-Ray image, as measured by the modulation transfer function (MTF) exceeds 12 lp/mm. This is measured by using a standard 60 kV intraoral X-ray source.
Does Efficiency: The sensor will produce a high quality image with an X-Ray dose that is only a fraction of the standard dose required by Dental X-Ray film.
Diagnostic Efficacy: The system will produce a superior image quality of images obtained when using standard dental X-Ray film. This allows the dentist to diagnose standard intraoral pathologies encountered during screening procedures.
Wide dynamic range: The sensor pixel well capacity is very high, allowing a higher accommodation of greyscale (bone density) dynamic range.
DENTSPLY SIRONA CEREC PRIMEMILLSpeedEngineered for speed and precision, the new CEREC Primemill inherits the proven strength of its predecessor and raises its powerful performance to entirely new heights.You can now mill zirconia restorations in Super Fast milling mode in around 5 minutes, cutting processing times by more than half. The improved grinding mode for high quality glass ceramics also grinds the material faster than ever before. The result? Satisfied patients and high productivity.QualityDENTSPLY SIRONA CEREC PRIMEMILL A combination of new electronics, software, motors and mechanical components contributes to finer resolution and enhanced dynamics. This results in outstanding restoration margins and surface details – for extremely precise results.The new highly accurate 0.5 mm milling tool reliably delivers first class clinical results. Switch to Extra Fine milling mode for a higher level of detail with occlusal fissures and interdental areas on bridges.VersatilityDENTSPLY SIRONA CEREC PRIMEMILL Welcome to a world where you‘re spoiled for choice! The new CEREC Primemill combines wet and dry milling and wet grinding. No matter the indication, with CEREC Primemill you can select from a broad range of material options from validated partners providing the flexibility and predictability you need to offer patients the best possible treatment.Choose from the full spectrum of machining options, including dry and wet milled zirconia, or wet grinding of glass and hybrid ceramics.ConvenienceDENTSPLY SIRONA CEREC PRIMEMILL The new 7” touch interface with user guidance guides operators step-by-step through the workflow, key maintenance procedures and other routine tasks, so you can delegate milling with complete peace-of-mind. The integrated block scanner is a time-saving new feature that automatically scans material blocks with compatible data matrix codes and records the information, including type, size, color and zirconia enlargement factor. All CEREC Primemill tools are fitted with a color-coded RFID chip that is read by the RFID tool reader, feeding into the tool status display, alerting the user if a tool needs replacing. This ensures all tools are performing at optimal levels. A LED light strip indicates unit status and milling and grinding progress.The all-new CERECThe latest generation of our CEREC system sets new standards so you can offer your patients an unmatched combination of single-visit dentistry and excellent quality.A unique solutionThe CEREC system comprises world-class components that interact perfectly ensuring seamless workflows. With CEREC Primescan, CEREC Software 5 and CEREC Primemill, digital chairside dentistry is faster, easier and more reliable than ever before.Outstanding resultsAfter 35 years of continuous optimization, CEREC gives you the options you need to treat multiple indications with the confidence that comes from outstanding results.
Designed to stand out – and fit inThe new CEREC Primemill does not just communicate seamlessly with other CEREC devices, but its sleek design is also the perfect match – and the ideal look for a progressive dental practice.
Reviews
There are no reviews yet.