| Content | Cutting Edge MLS M6 Laser Therapy Unit
The M6 therapy laser is a robotized multi-target device designed to treat patients suffering pathologies affecting a wide area, and to perform automatic applications. The distinctive feature of the M6 is the innovative multi-target functioning. Thanks to the features of the exclusive MLS multi-diodic optical group, a wide area is treated instantaneously helping to produce an immediate response of the treated tissues. The results are better and faster than with the scanning modality of traditional laser therapy products.Technical Features
Robotized optical group with 3 MLS sources – power up to 3.3 W
5 cm diameter target area highlighted by high-efficiency red light LEDs
Back-lit graphic touch-screen display
Simultaneous management of two independent channels
MLS pulse modulation frequency from 1 to 2000 Hz with 1 Hz steps
Power level 50% and 100%
Variable or fixed duty cycle
Treatment duration from 1″ to 99’59” with 1″ steps
Automatic calculation of the emitted energy according to the set parameters
Alarms and Safety Features
Laser emission warning light
Interlock (can be temporarily disabled)
Acoustic signal for the beginning and the end of the therapy, and for each treatment second (can be disabled)
Password to operate the device
Language option (Italian, English, German, Spanish)
Dimensions and Weight
27 x 17 x 62 inches; 95 lbsPower Supply
115/230V~ 50/60Hz 150VACUTTING EDGE MLS M6 Laser Therapy UnitTalk to your specialist.
Since 1983 we have been working to be the reference point in Laser Therapy and Magnetotherapy in many areas: from physiotherapy to rehabilitation, from the management of muscle and joint pain to sports medicine. The result of our work allows us today to be recognized as an international leader in the knowledge and development of advanced technologies in the field of “pain management”: a recognition confirmed in 2003 with the entry of the El.En Group. (Star segment of the Italian Stock Exchange – ELN.MI), one of the most important realities in the laser world, both for industrial and medical applications.We have always thought that research is not only confirmation, but also the necessary premise for our work. Born from the synergy between ASAlaser and the Department of Experimental and Clinical Biomedical Sciences of the University of Florence , the ASAcampus laboratory allows us to test the validity of our work and improve results over time. The result of the research is disseminated through conferences, supported thanks to important partnerships and disseminated through numerous scientific publications.Our medical devices for MLS ® Laser Therapy , Hilterapia ® and Magnetotherapy are built according to contents that we consider indispensable: advanced technologies and software, efficacy and safety, ergonomics and design. They allow for ever more targeted and personalized treatment methods. The effectiveness of our therapies is continuously tested thanks to the research carried out in ASAcampus whose results are constantly transferred to clinical applications. | 2018 Lutronic Infini RF Microneedling Skin Tightening System Type: Bipolar RF (Radiofrequency) Frequency: 1 MHz Total RF Treatment Level: Up to Level 20 (Max. Power 50 W) Operation Mode:Microneedle Fractional RF (MFR) Treatment Duration:10 ms – 1,000 ms Tips: MFR Microneedle electrodes, 0.5 – 3.5 mm (Adjustable depth) SFR: Up to 144 pins Display: Color Touch LCD (Total Shot Count Displayed) Dual Switch: Foot & Finger Switch Weight: 28 kg Dimension: 362 mm (W) x 409 mm (L) x 1713 mm (H) Location: Lower Face Submental, Neck, Forehead, Periorbital Pass: Pass1: 2.25 – 3.5 mm, Pass2: 1.5 – 2.25 mm, Pass3: 1.0 – 1.25 mm Intensity: Low, Medium, High MANUFACTURER NOTES: Infini Radiofrequency Microneedling The LUTRONIC INFINI is the ideal solution to create targeted and robust coagulation zones in aging, sagging skin with pigmentation, wrinkles and laxity. Complete control over treatment depth and energy levels enables a multi-layered targeted approach for truly customized treatments, regardless of patients skin type or tanned skin. Now you can provide the best solution for results your patients demand year round. UNIQUE TECHNOLOGY, AMAZING RESULTS Infinis proven & impressive design delivers enhanced wrinkle reduction through 3-dimensional energy delivery to volumize tissue. RF energy delivered via insulated gold-coated microneedles creates precise and controllable fractionated coagulation zones within a specific layer of dermis. Adjustable depth control allows for customized and reproducible treatments of delicate areas. Infini effectively lowers the risk of PIH in dark skin types and can be safely used on patients with melasma and other types of pigmented lesions. Lutronics patented ComfortFlow technology maximizes comfort and patient satisfaction. INFINI is unique technology that puts you in control of your skin rejuvenation procedure. You control the treatment depth and energy levels to enable a multi-layered approach for customized treatments, regardless of skin type or tan. Now you can provide the best solution that will keep your patients returning and referring you to new patients.
IDEAL FOR:2018 Lutronic Infini RF Microneedling Skin Tightening– Acne Scars
– Skin tightening– Wrinkles and fine lines– Active inflammatory acne– Enlarged pores– Scar treatment– Stretch marks– Hyperhidrosis – Over production of sweat– Excessive sebum (face oil) production | Zimmer zwave pro laser system body contouring
The high energy radial shockwaves scientifically proved to have a large impact on collagen structure and the skin connective tissue, improving blood circulation.
It stimulates collagen formation, while the skin becomes more elastic and its firmness is visible after only a few treatments.
Thanks to the ZWave radial shockwave unit, it is also possible to significantly improve skin firmness, skin elasticity and collagen regeneration. Fat reduction, for example, after CryolipolysisTM or injection lipolysis is also enhanced by using the ZWave.ZWave & ZLipo – the perfect combination
Skin tightening and body contouring are becoming increasingly important in the modern practice. After several treatments for fat reduction, such as e.g. CryolipolysisTM, liposuction, or injection lipolysis, a more extensive application for skin tightening is urgently recommended and expected by the patient. Various studies and user observations have proven its effectiveness.Skin tightening and body contouring
ZWave is used as a “stand-alone” application or in combination with other, mostly fat reduction methods. In the case of the “stand-alone” application, the focus is generally on improving the skin structure and connective tissue. Typical application areas are, e.g. cellulite, connective tissue weakness (upper arm, underbelly, etc.) and stretch marks (striae).Zimmer ZWave Pro Laser System Body ContouringTechnology:Electro-magnetically generated Radial Pulse Technology, 1-22 Hz, 60-185mJ
Programs:3 recommended application presets
Controller:12 color touch screen for all software operations. Full range control for energy and frequency.
Foot switch:control for hand piece.
Memory and Update:SD card for custom programs by user/error log/firmware updates
Voltage:110 volts, 60 Hz
Dimensions & Weight:L 20.5 / W 21 / H 54.5 Weight: 70 lbs.
Z Wave Pro Catch the Z Wave
The Zimmer ZWave Pro Body Contouring transmits powerful sound waves into the tissue. The energy then spreads out radially to enhance the treatment effect.
The body responds to the Z Wave Pro sound waves with increased metabolic activity in the form of lymphatic drainage and increased blood circulation.
The end result is an improvement in the appearance of cellulite and other body contouring procedures.
Z Wave & Cryolipolysis Enhanced Results
Thanks to Z Wave, it is possible to significantly enhance body contouring results with CryolipolysisTM and RF treatments.
Various studies have shown its effectiveness with body contouring treatments.Application Range
Cellulite Treatment and Enhanced Body Shaping
Z Wave is used as a stand-alone application or in combination with body contouring treatments. As a stand-alone application, the focus is on improving the appearance of cellulite.Patient-friendly Application
Zimmer ZWave Pro Body Contouring Radial Pulse Technology has the following advantages:gentle, painless and quick treatments
no disposables
no down time
non-invasive treatment
visible results
versatile
easy to operate
superior alternative to hand massage post body sculpting
consistently reproducible resultsHand Piece Characteristics
efficient energy transfer from hand piece to deep tissue structures up to 35 mm
treatment is comfortable for both patient and technician
hand piece is controlled via foot switch
each Z Wave Pro comes with 2 hand pieces and is ready for use any time
each hand piece is warranted for 2,000,000 pulses. The two hand pieces should yield approximately 1,600 application zones
enhanced patient comfort due to longer rise time (pulse width) without the need for unpleasant high peak energy | Erchonia Zerona Z6 Laser
The Zerona Laser Can Non-Invasively Reduce Upper Arm CircumferenceThe Zerona laser showed significant effectiveness in treating upper arms in a recent 40 subject, double-blind, randomized sham controlled clinical study. Subjects in the study were strictly screened to only include males and females aged 18 to 65 who were willing to maintain a regular diet and exercise during the time of the study. The study excluded all patients with any confounding medical, surgical, or other problems.All subjects were treated with a total of six, painless 20-minute treatments with either the Zerona 635 nm low-level laser or a sham laser device over a 2 week period. Upon completion of the treatments and at two weeks post-treatment, the active treatment group showed approximately a 4 cm combined reduction in the bilateral circumference and the sham treatment group showed essentially no change. Additionally, in the active treatment group 60 percent of the subjects met the success criteria and experienced a combined arm circumference reduction of 1.25 cm or greater compared with 0 percent of the patients treated with a sham laser. All of the results were highly statistically significant. Both groups showed no change in body mass index (BMI).Using low level laser light, the Zerona laser creates a pore in fat cells and stimulates fat to leak out of the cell. The cell deflates, but is not destroyed, and the fat is naturally processed by the lymphatic system as waste. After six treatments, one every other day for two weeks, patients lose an average of 3.65 inches from their waists, hips and thighs without pain, side effects or downtime.
COLD LASER and LOW LEVEL LASER TREATMENT TECHNOLOGYErchonia Zerona Cosmetic Laser is the first non-invasive fat loss laser to effectively target excess fat without the negative side effects associated with surgical methods. Zerona utilizes the same cold laser technology developed by Erchonia, which has been shown to emulsify fat and allow it to move to the interstitial space.Although this technology was originally utilized to help assist tumescent liposuction procedures, it was found that the cold laser treatment alone helped clients to reduce inches from their waist, hips, thighs, arms, chest, knees, ankles and back or bra fat thus creating overall body slimming effect.The research represented below was done in the US using an Erchonia laser and shows time released photography of one fat cell and its contents being emptied. Please note the cell is still alive. Erchonia uses only its own research to prove its patent and pending applications.
Erchonia Zerona Cosmetic Laser AdvantagesNo pain, no downtime and no risk
Proven effective
Superior treatment area coverageErchonia Zerona Cosmetic Laser Specifications Erchonia Zerona Z6 LaserUnit Status: This Unit is unlocked
Chassis: Power Coated metal frame for ease of cleaning.
Housing: Thermoformed of Non-allergen material / plastic
Accessories: 2 Keys, Laser Safety Glasses
Configuration: 5 – 3b Line Generated Laser Diode Modules
Wavelength: 635 nm
Modulation: Constant Wave (CW) – 1 MHz
Programming: 5 time-saving presets
Display: 8″ Full Color TFT Touch Screen
Electrical Info: 100-240 V (AC), 50-60 Hz
Dimensions: 49″ x 32″ x 57″
Weight: 266 lbs | Philips HD11XE Ultrasound MachineThe HD-11xe is an excellent shared service machine that balances price and performance perfectly with access to high end features such as 4D and excellent cardiac support. The “xe” version adds an LCD monitor on an articulating arm and software upgrades such as Qlab.PHILIPS HD11 XE ULTRASOUND SYSTEMSOFTWARE VERSION:YEAR OF MFG: 2007INSTALLED OPTIONSQLAB – 2DQ, QLAB – SQ, QLAB – ROI, QLAB – IMTDICOM STRUCTURED REPORTINGDICOM NETWORKINGXRESPANORAMICSONOCTVASCULAROB/GYN GENERAL IMAGINGINCLUDED PROBESC5-2 Convex/AbdomenC8-4v Endo/OBGYNL12-5 Linear/Vascular/Small Parts The Philips HD11xe is an extremely popular midrange ultrasound machine that dominated sales in the shared service segment for nearly a decade. The HD11xe balances price and performance perfectly while still giving access to high-end features such as 4D and TEE. The HD11xe had more transducer options than any other midrange and even more than many high-end ultrasound machines. The HD11xe is the replacement for the HD11 and adds an LCD monitor on an articulating arm and software upgrades such as Qlab. The HD11xe is still in high demand after it has gone out of production and offers an amazing value as a refurbished or remanufactured system. the HD11xe was replaced by the Affiniti 50. Features Fully equipped system supports wide range of facilities This full-featured performer combines broadband beamforming, automated imaging optimization tools, and cutting-edge technologies. The HD11 XE is ideal for public and private hospitals, satellite clinics or specialized practices, and backed by Philip’s award-winning* customer support program. SonoCT and XRES for astounding clarity with images SonoCT imaging technology uses transmit beam-steering techniques to obtain exceptional clear images through compound imaging. XRES adaptive image processing reduces artifacts and enhances margin and border definition for high-quality image. SonoCT and XRES working in tandem display images boosting your diagnostic confidence and allowing you to make patient management decisions quickly. Data management & connectivity enhance efficiency This system supports flexible recording, archiving, and editing, as well as the creation of exam reports with embedded images. On-screen image thumbnails let you build your study and check exam status, at a glance. CD and optional peripheral devices support your documentation and archiving needs. Cardiac & stress echo capabilities extend clinical value The HD11 XE has the versatility to expand into a complete, digital cardiovascular imaging system for further clinical utility and value. You can also add powerful options like QLAB advanced quantification, stress echo, contrast imaging, and transesophageal echo to further enhance your cardiovascular imaging capabilities. | Lutronic Clarity II
Lutronic’s Clarity II is a high-powered, dual-wavelength platform that effectively delivers a wider range of parameters to help safely and efficiently treat the broadest indications with ease. The innovative design includes: a single fiber for all spot sizes(2-25mm), intuitive interface, and no need for calibration after any parameter change. Clarity II can save time and help facilitate faster, more effective treatments.
Higher power 755/1064nm platform for effective treatments up to 45%* faster.
Brilliantly removes hair, pigment, and vascular lesions in all skin types.
IntelliTrak technology and Temperature Sensing enable increased provider confidence and treatment efficacy.Clarity II
Key Feature
1. Powerful and faster
Provide up to 25mm spot size at a useable >2 Hz
High power performance
Up to 45% faster
2. Intelligent and convenientIntelliTraking system to prevent skip area and consistent treatment
Real time skin temperature monitoring system
3. Designed for versatilityIntelligent memory function to keep track of past treatment history in detail
Zoom cartridge system for treatment areaLutronic Clarity IIHow It Works
The CLARITY II Laser System contains two separate laser resonators, Alexandrite and an Nd:YAG, which generate pulse laser energy at the nominal wavelength of 755nm and 1064nm respectively. The output of each laser generator and the 515nm aiming beam are optically combined on the laser rail so that their beam paths are identical as they exit the laser system. This allows the use of a single delivery system for either the 755nm or 1064nm wavelength.Clarity II
with IntelliTrak technologyHigher-powered 755/1064nm platform laser
Up to 2X faster Laser Hair Removal Txs*
Exclusive shorter pulsewidths available including 1ms setting
for finer facial hairs
Breakthrough intelligent capabilities
IntelliTrak technology for faster more consistent Tx coverage
Temperature Sensing for real-time skin temp feedback
during Tx
Auto-calibration in seconds saves time and
improves productivity
Advanced, easy-to-use platform
Single fiber for all 2-24mm spot cartridges
Numerous skin rejuvenation capabilities including vascular,
pigment, and toning Txs
*At settings of: 755nm, 5ms, 12J/cm2: Clarity II at 22mm, 3Hz, IntelliTrak at 18% overlap vs.
older system at 18mm, 2Hz, and est. ~18% manual overlap. Geometric treatment coverage speed is
11.4cm/second with Clarity II vs. 5.1cm/second with older system. |
Reviews
There are no reviews yet.