View cart “Dexis Intraoral Digital Dental X-Ray Sensor For Sale” has been added to your cart.
-40%
Availability: In Stock
3Shape D810 Dental Scanner For Sale
$7,500.00$4,500.00
The wax-up fixture – enables scanning of wax-ups and bits from all angles and sides. The wax-up is suspended in wires that will be invisible in the scan result. Two-cast fixture – enables users to firmly set 2 models, preparation and antagonist, in occlusion so they do not move during scanning. The Two-cast fixture functions like a clamp making it easy to set while holding the models in occlusion.
Other people want this. 15 people have this in their carts right now.
Combining accuracy and speed with Multi-Die scanning capabilities
The 3Shape D810 Dental Scanner takes labs to whole new productivity
levels with high speed scanning, and ultra-efficient batch and
multi-case processing capabilities.With its new and unique Texture Scanning feature plus 5.0 megapixel
cameras,
3Shape’s D810 scanners wield the market’s most advanced 3D
scanning technologies. 3D scanning in connection with designing
implant bridges and bars requires very high accuracy.
series scanners are among the few that can deliver reilable data for
these indications.
Capture complete textures and pencil markings
Implant bridge and bar accuracy
Market’s most extensive suite of scan indications
High productivity with Multi-Die scanning
3shape D810 3D Scanner
Highly Accurate Scanning
Scan time Die: 25 sec (30 sec)
Resolution 2 cameras, 5.0 Mega Pixels
Accuracy Ultra High accuracy: < 15 Microns Texture Scanning technology High detail detection and capture of
hand-drawn markings on model
Multi-Die Scanning Scan batches for single or multi-case processing
The wax-up fixture – enables scanning of wax-ups and bits from all
angles and sides. The wax-up is suspended in wires that will be
invisible in the scan result.
Two-cast fixture – enables users to firmly set 2 models, preparation
and antagonist, in occlusion so they do not move during scanning. The
Two-cast fixture functions like a clamp making it easy to set while
holding the models in occlusion.
3shape D810 3D Scanner The impression fixture – Enables automatic alignment of upper and
lower when scanning triple-tray impressions. The impression is fixed
in a permenant position in the flippable holder. The scanner and
software can recreate the precise upper and lower relationship in the
digital model.
Featrues:
– 2 cameras with reduced angle enable impressions, deep inlays and full undercuts to be scanned effectively.
– The 3-axis motion system allows the dental object to be tilted, rotated and translated, facilitating scanning from any viewpoint enabling scanning of more than 350 degrees of a sphere.
– Scan parameters are automatically adjusted to the object’s material for accurate color capture.
– Automatic scanning with the multi-die plate.
Technical Specifications
– Scan Time (Final 3D Model): Single die: 25 sec (30 sec)
– 3-Unit Bridge: 100 sec (125 sec)
– Resolution: 2 cameras, 5.0 Mega Pixels
– Accuracy: Ultra high: <15 Microns
– Material Color: Material color independent
– Scan Indications: Market’s most extensive range.
– Dimensions (W x H x D): 37 x 29 x 33cm (14? x 11?x 13?)
– Texture Scanning Technology: High detail detection and capture of hand-drawn markings on model
– Multi-Die Scanning: Scan batches for single or multi-case processing
3Shape D500 Dental Lab CAD Scanner, Computer
Reviews (0)
Reviews
There are no reviews yet.
Be the first to review “3Shape D810 Dental Scanner For Sale” Cancel reply
The wax-up fixture – enables scanning of wax-ups and bits from allangles and sides. The wax-up is suspended in wires that will beinvisible in the scan result.Two-cast fixture – enables users to firmly set 2 models, preparationand antagonist, in occlusion so they do not move during scanning. TheTwo-cast fixture functions like a clamp making it easy to set whileholding the models in occlusion.
iTero HD2.9 simply allows to digitally scan a prepared tooth and wirelessly send this information directly to the dental laboratory for fabrication of a CAD/CAM crown without the gooey mess.
The DEXIS Digital X-ray System includes a highend CCD sensor, portable PC card and DEXusb connection options, DEXIS imaging software, a complete set of sensor holders and accessories, on-site training, a printed instruction manual, training tutorials on CD, a quick reference guide for the operatory, and 1 year of DEXcare support.
Because the XIOS Scan imaging plates were developed specifically for the Sirona scanner, they offer particularly high image quality. For better identification and visibility in the mouth, the plates have a white, inactive back and a blue, active side.
A true open architecture system, the compact DWX-50 integrates with industry standard 3D scanners, computers and all popular CAD/CAM software to provide a very cost-effective production solution. Advanced communications tools and operating features allow the DWX-50 to mill unattended while providing confidence in the finished product to the lab technician.
The industry’s most cost-effective and user-friendly dental mill, the DWX-4 produces single crowns, copings, bridges and hybrid abutments with precision and ease. The DWX-4 is the ideal device for labs just getting into digital milling or labs that need a second device for urgent jobs. With the DWX-4 dental milling system, you can quickly and economically mill on-demand in a wide variety materials, including the latest hybrid ceramics.
Content
3Shape D810 Dental Scanner
Combining accuracy and speed with Multi-Die scanning capabilities
The 3Shape D810 Dental Scanner takes labs to whole new productivity
levels with high speed scanning, and ultra-efficient batch and
multi-case processing capabilities.With its new and unique Texture Scanning feature plus 5.0 megapixel
cameras,3Shape’s D810 scanners wield the market’s most advanced 3D
scanning technologies. 3D scanning in connection with designing
implant bridges and bars requires very high accuracy.
series scanners are among the few that can deliver reilable data for
these indications.Capture complete textures and pencil markings
Implant bridge and bar accuracy
Market’s most extensive suite of scan indications
High productivity with Multi-Die scanning3shape D810 3D Scanner
Highly Accurate Scanning
Scan time Die: 25 sec (30 sec)
Resolution 2 cameras, 5.0 Mega Pixels
Accuracy Ultra High accuracy: < 15 Microns
Texture Scanning technology High detail detection and capture of
hand-drawn markings on model
Multi-Die Scanning Scan batches for single or multi-case processingThe wax-up fixture – enables scanning of wax-ups and bits from all
angles and sides. The wax-up is suspended in wires that will be
invisible in the scan result.
Two-cast fixture – enables users to firmly set 2 models, preparation
and antagonist, in occlusion so they do not move during scanning. The
Two-cast fixture functions like a clamp making it easy to set while
holding the models in occlusion.3shape D810 3D Scanner The impression fixture – Enables automatic alignment of upper and
lower when scanning triple-tray impressions. The impression is fixed
in a permenant position in the flippable holder. The scanner and
software can recreate the precise upper and lower relationship in the
digital model.Featrues:
- 2 cameras with reduced angle enable impressions, deep inlays and full undercuts to be scanned effectively.
- The 3-axis motion system allows the dental object to be tilted, rotated and translated, facilitating scanning from any viewpoint enabling scanning of more than 350 degrees of a sphere.
- Scan parameters are automatically adjusted to the object’s material for accurate color capture.
- Automatic scanning with the multi-die plate.Technical Specifications
- Scan Time (Final 3D Model): Single die: 25 sec (30 sec)
- 3-Unit Bridge: 100 sec (125 sec)
- Resolution: 2 cameras, 5.0 Mega Pixels
- Accuracy: Ultra high: <15 Microns
- Material Color: Material color independent
- Scan Indications: Market’s most extensive range.
- Dimensions (W x H x D): 37 x 29 x 33cm (14? x 11?x 13?)
- Texture Scanning Technology: High detail detection and capture of hand-drawn markings on model
- Multi-Die Scanning: Scan batches for single or multi-case processing
3Shape D500 Dental Lab CAD Scanner, Computer
iTero HD2.9 simply allows to digitally scan a prepared tooth and wirelessly send this information directly to the dental laboratory for fabrication of a CAD/CAM crown – without the gooey mess. The wireless transmission saves shipping time and eliminates distortion that can often be found with traditional stone modelsThe digital scan is, quite literally, digitally perfect. We then deliver the digital scan to our lab where a precision fitting restoration is created.iTero HD2.9 system eliminated the uncomfortable patient experience of traditional impressions, utilizes advanced state of the art digital technology, and provides with superior fitting restorations with little or no adjustmentsiTero Intra-Oral Scanner
Model: HD2.9
2014 Date of Mfg.
Brochure/Video: Click Here
Limited Use
Includes:
iTero Software (pre-loaded)
90 Day Parts Warranty
User Manual(s)
Free Standard Shipping (Commercial USA Addresses)
Its ergonomic design comes with safe docking station. It has thin fiber optic cable which enables quick data transfer from the wand to the cart. This optimized cable length assists various cart positions in the operatory.Orthodontic treatment is more than just straightening teeth; it’s about ensuring your teeth and jaws are in alignment. To achieve this, we need to get an accurate look at where your teeth are positioned. To do this, we use the iTero Intraoral digital scanner.A good impressionIn the orthodontic and dental industries, ‘impressions’ is the term we use for getting a good picture of where your teeth currently sit. These impressions were previously taken using a type of dental cement. Pasted on your teeth, patients were required to lie for a few minutes while the cement-like material set. The dental professional could then remove the set material which had formed an ‘impression’ of your teeth.This process was messy, rather unpleasant and not very comfortable. Fortunately, that method is a thing of the past. These days, we use scanning technology and at L&L Orthodontics, our technology of choice is the iTero Intraoral digital scanner.
What is the iTero scanner?
The iTero scanner is new 3D orthodontic scanning technology. Using the latest developments in intraoral scanning, the iTero scanner accurately scans your teeth as part of your orthodontic assessment. The iTero scanner is made up of a small, wand-like device which is used to scan your teeth and jaws. The data it is collecting then appears on the computer screen, allowing you to see the ‘impressions’ the scanner is taking.The iTero scanner works in with Invisalign®* treatment and lets you see what your teeth will look like post-treatment, even before you’ve started. Before we recommend a course of treatment for you, we’ll take impressions of your teeth using the iTero scanner to ensure we are making our recommendation on accurate information.To find out more about the iTero scanner and other orthodontic technology we use here at L&L Orthodontics, book your specialist consultation today.
Dexis Intraoral Digital Dental X-Ray Sensor
Software Ease of Use
According to the manufacturer, the DEXIS x-ray software was designed to be highly effective throughout diagnosis, treatment planning, and treatment. It is intended to serve as an imaging hub, managing all digital images, including intra- and extraoral radiographs and photographs. The manufacturer states that the images can be quickly organized, stored, retrieved, printed, and shared with patients and colleagues. The 9 dentists who participated in this product evaluation were asked to rate the DEXIS Digital Imaging software on its ease of use with regard to taking and accessing radiographs and for diagnosis, patient education, and communication with colleagues and insurance companies. Six of the evaluators rated the system as excellent and 3 rated it as very good. One evaluator commented that “when communicating with patients, we use DEXIS images displayed on a monitor in front of the patient every day on virtually every patient.”Software Integration
The manufacturer claims that the DEXIS imaging software can be easily integrated with all major practice management systems. According to DEXIS, the DEXIS Integrator automatically synchronizes with the patient record.
When the evaluators were asked to rate the software integration with practice management software and interface with hardware (eg, cameras, panoramics, and scanners), 78% rated it as excellent to very good, while 22% rated it as good. One of the evaluators said, “The bridge to our practice management systems is seamless. We use [the] DEXIS digital pan[oramic] so that we can store panoramic x-rays easily in the same location as full series. We use an intraoral camera to store preoperative and interoperative photographs for excellent documentation.”Sensor Comfort and Ease of Use
According to DEXIS, the heart of their digital system is the PerfectSize sensor. The manufacturer states that their single-size sensor has 3 advantages:
1) because the electronics are on the back of the sensor, the active imaging area is most of the total sensor size;
2) the beveled corners, slim profile, and rounded casing allow for accurate placement and patient comfort;
3) patented cord placement allows the practitioner to take vertical and horizontal bitewings and all periapicals with only 1 universally sized sensor. The evaluators were asked to rate both the ease of use of the sensor and patient comfort. Five evaluators rated ease of use excellent and 4 rated it very good. With regard to patient comfort, 3 evaluators rated the sensor excellent and 6 rated it very good. One evaluator noted that he experienced a few issues when placing the sensor in some children and patients with very small mouths. Another evaluator, however, is very happy with the sensor, saying, “I chose DEXIS to take a full radiographic series on every patient. It was the only direct image system we tested that met that objective.”Image Quality Dexis Intraoral Digital Dental X-Ray Sensor
According to DEXIS, their digital xray system provides detailed image quality and includes image enhancement tools that increase diagnostic capabilities. When the 9 evaluators were asked to rate the system’s image quality and enhancement aids, 89% rated them as excellent to very good. One of the evaluators commented that the system’s “ClearVu and image magnification allow us to diagnose very effectively.”Overall Satisfaction
When asked to rate their overall satisfaction with the DEXIS Digital X-ray System, 89% of the evaluators rated it as excellent to very good. Commented one evaluator, “DEXIS has been very responsive to our needs.”
XIOS scan Sirona
XIOS Scan. Small change. Big impact.
The XIOS scan provides a gentle, easy introduction into the world of digital X-ray imaging. If you want to switch from film to digital without having to give up your tried-and-true working methods, imaging plate technology offers you a myriad of possibilities. You can experience many of the advantages of digital imaging without a darkroom and chemicals while your team continues its regular workflow. XIOS Scan completes the family of intraoral X-ray systems from Sirona which includes the sensors XIOS XG and the intraoral X-ray HELIODENTPLUS source.
Tried-and-true workflow meet the advantages of digital imaging
Outstanding scan quality with 22 line pairs/mm
Scratch-free scanning and automatic film detection
Proven Sirona quality “Made in Germany”Technical data
XIOS Scan
Dimensions (H x W x D) 363 mm x 163 mm x 286 mm
Weight 7.3 kg ± 0.5 kg
Pixel size selectable 23/30 μm
Resolution 22/17 Lp/mm
Interface LAN
Dimensions
Storage plate intraoral
Size 0 31 mm x 22 mm
Size 1 24 mm x 40 mm
Size 2 31 mm x 41 mm
Size 3 27 mm x 54 mmSmall Change. Big Impact.
Xios Scan provides a gentle, easy introduction into the world of digital X-ray imaging. If you want to switch from film to digital without having to give up your tried-and-true working methods, imaging plate technology offers you a myriad of possibilities. You can experience many of the advantages of digital imaging without a darkroom and chemicals while your team continues its regular workflow.The Xios Scan integrates seamlessly with the Dentsply Sirona X-ray units and software to deliver better, safer and faster intraoral diagnostics.For the best digital image quality and the easiest workflowXios Scan works at an outstanding resolution of up to 22 line pairs/mm (theoretical resolution). The result is exceptionally sharp and detailed images - ideal conditions for an accurate diagnosis. The images are transmitted directly to Sidexis 4, Dentsply Sirona Imaging's software, where they can then be further evaluated and diagnosed. The software provides simple controls for later editing of the visual impression of the X-ray in terms of sharpness, brightness and contrast.
The compact DWX-50 combines 5-axis simultaneous machining capability and a five-station automatic tool changer to deliver advanced features at a very affordable price point. Designed specifically for dental labs and technicians, the user-friendly DWX-50 allows for clean, quiet operation and the quality production of complex dental arches, abutments, bridges, copings and crowns from zirconia, wax and PMMA. Equipped with an integrated air blower and dust collection system, the DWX-50 ensures protection of moving parts while maintaining a clean, safe environment. Built on open technology, the DWX-50 supports a wide range of industry standard CAD/CAM software and tools, allowing for easy integration with popular commercially available dental prosthetic production solutions.5-axis simultaneous machiningCapable of 5-axis simultaneous machining, the DWX-50 supports the production of high-quality dental prosthetics at an affordable price point. The DWX-50 is designed to mill on X, Y and Z axes, rotating blocks and discs of material 360 degrees in both clockwise and counterclockwise movements, as well as tilting materials forward and backward 20 degrees to support complex cuts.Five-station automatic tool charger Roland DWX-50 5-Axis Dental Milling MachineThe five-station Automatic Tool Changer (ATC) with a tool length sensor enables the user to run multiple tools for one job or an entire disc unattended. Instead of inspecting finished pieces to determine if everything was milled correctly, the integrated tool diagnostics feature will notify users if a tool was broken prior to completion, resulting in reduced time and wasted materials.Taking control of prosthesis productionWith its unmatched ease of use and short learning time, the DWX-50 provides a cost-effective solution that is ideal for dental labs wishing to take control of the production process while avoiding the long lead times and costs associated with outsourcing.A true open architecture system, the compact DWX-50 integrates with industry standard 3D scanners, computers and all popular CAD/CAM software to provide a very cost-effective production solution. Advanced communications tools and operating features allow the DWX-50 to mill unattended while providing confidence in the finished product to the lab technician.
Digital dental technologies are transforming every aspect of the dental industry, making it easier than ever to produce precise crowns, copings and bridges. The latest technological advancements in scanning, CAD/CAM software and CNC milling allow digital dental labs to deliver custom production with speed and precision and enjoy optimal accuracy and repeatability.The industry’s most user-friendly desktop milling solution, the Roland DWX-4 compact dental mill, is at the forefront of this technological revolution. With the DWX-4, you can mill a single crown or small bridge quickly and economically. Affordably priced, the DWX-4 is ideal for any lab just getting started in digital dentistry or those labs with scanners who no longer wish to outsource production. It’s also the perfect addition to labs that need a second device for urgent jobs. With the DWX-4, these labs can mill a single crown or bridge on demand, without tying up their larger production mills.This affordable, precise 4-axis desktop mill is an ideal choice for labs just getting started in digital dentistry or for those that want to perform smaller, time-urgent jobs (like a single crown or small bridge) without tying up their larger production mills.
Features and Benefits:Roland DWX-4 Dental Milling Unit
Compact design is ideally suited for all lab environments
Air blower to aid with difficult-to-mill materials
Negative ion generator for neutralizing static electricity
Multicast capability for connecting up to four DWX dental mills to one computer
Color-coded LED light signals machine status
Automatic calibration
E-mail notification system
Dust collection system with airflow sensor
Virtual panel ensures easy operation
G-code compatible
Compatible with industry-standard software
Open architecture for easy integration into a complete production solution
CAM software included
The industry’s most cost-effective and user-friendly dental mill, the DWX-4 produces single crowns, copings, bridges and hybrid abutments with precision and ease. The DWX-4 is the ideal device for labs just getting into digital milling or labs that need a second device for urgent jobs. With the DWX-4 dental milling system, you can quickly and economically mill on-demand in a wide variety materials, including the latest hybrid ceramics.
Reviews
There are no reviews yet.