| Content | 3Shape D500 Dental Lab CAD Scanner with Computer
The 3Shape D500 Dental Lab CAD Scanner is designed to provide powerful 3D scanning for any laboratory size and budget. With support for impression scanning capabilities, the D500 represents one of the market’s most attractive entry-level investments.The 3Shape D500 Dental Lab CAD Scanner compact dental scanners are built on 3Shape’s leading scanning technologies and come with the range of dental indications provided in Dental SystemTM Standard. The D500 scanner is upgradable to Dental System™ Premium for extending the range of available indications and widening your business scope. - Optimized Scanning: Quick, high resolution scanning of gypsum and
impression models. Single die: 50 sec (55 sec) Full model: 100 sec
(115 sec)- High Resolution: 2 cameras (3 axis movements), 1.3 Mega Pixels
Extremely Accurate: High accuracy: < 20 Microns
Dental System Standard: Covers all basic dental indications, including
copings, bridges, full contour crown and bridges, wax ups and
inlays/onlays.3Shape's user-acclaimed 3D scanning for any lab
The D500 is designed to provide powerful 3D scanning for any
laboratory size and budget. With support for impression scanning
capabilities, the D500 represents one of the market's most attractive
entry-level investments.Your cost-efficient CAD/CAM soution
The D500 compact dental scanners are built on 3Shape's leading
scanning technologies and come with the range of dental indications
provided in Dental SystemTM Standard.Ensure your future with this upgradable scanner
The D500 scanner is upgradable to Dental System Premium for extending
the range of available indications and widening your business scope.
2 Cameras and 3-Axis Scanning
The D500 is built with 2 cameras with reduced angles, which is
required to effectively scan impressions and deep inlays. The scanner
employs a unique 2 cameras and 3-axis motion system, which results in
unrivaled accuracy in object geometry acquisition. The 2 cameras with
reduced angle enables the D500 to effectively scan complicated
geometries; areas where a single camera often will be blinded by the
cavity. Two cameras also improve general coverage and accuracy.The impression scan can be applied directly in 3Shape DentalDesigner
like any gypsum model scan and sets new standards for system
applicability. In combination with DentalDesigner™ the new D500
scanner brings unprecedented scan-to completed design time to the
market for digital dentistry. attractive opportunities in terms of
manufacturing cost, model creation speed and quality.The created virtual model – saved as STL – is sent to digital model
making machines, which are currently evolving rapidly, driven by
impression and intra oral scanners. Use either a 3D printer or a mill
to produce casting patterns, or a milling machine with zirconia blocks
to produce finished parts for direct implant. A physical model can
also be used to show the impression to the patient or dentist - to
initiate client and lab communication - especially when scanning in
the dentist's office..Specifications:3Shape D500 Dental Lab CAD Scanner with Computer
- Scan time (Ready STL)
- Single die: 50 sec (55 sec)
- Full model: 100 sec (115 sec)
- Accuracy: < 20 microns, Consistently excellent fit on 14-unit bridges
- Dual Image Capture: 2 x cameras, 1 x laser
- Motion System: 3-axis: rotation, linear motion and tilting
- Interface: USB connection to PC and laptop
Output formats: TL (open standard) and DCM
- Material color: Material color independent
- Standard scan indications: Copings, Bridges, Full Contour Crowns and Bridges, Waxups, Inlays/Onlays
- Regulatory conformity: CE, RoHS, FCC, FDA registered, WEEE
Upgradable: To Dental System Premium enabling full range of indications | QUICKSCAN IOS Full Color Powder Intraoral Scanner
QUICKSCAN IOS Full Color Powderless Accurate, Digital Impression Intraoral ScannerThe QuickScan IOS intraoral scanner is powderless and offers full color digital 3D scans. It is equipped with the latest technology of the new generation of intraoral scanners. Tested by independent labs, it’s accuracy and performance are comparable to other leading scanners but at a fraction of the cost! Benefits QuickScan IOS scans can be viewed in leading software such as 3shape, EXOCAD and Bluesky Bio. Features & Specifications Scanner Size : 240 x 49.5 x 30.5mm Scanner Weight : 210g Distance : 0-17mm Accuracy : 20um Imaging Mode : Synchronous 3D Video Quick Reset : Yes Model Optimization : Yes Warranty: 1 Year Application QuickScan IOS uses an optical scanning method to collect the 3d geometric data of the tooth in the patient's mouth and provide the 3d digital model for CAD/CAM denture design and processing. Features The excellent image quality is based on advanced CMOS technology. The convenient three-zone collection process uses a compact, comfortable, durable scanner head • Easy to use USB 2.0 interface. Standards GB 9706.1-2007 Medical electrical equipment - Part 1: General requirements for safety GB-191-2008 Packaging – Pictorial Marking for Handling of Goods Power 110V-220VAC Classification | Specification Model | Scope of reconstruction | Pixels | | QuickScan I0S-11 | 14 x 14 x 15 mm | 1024 X 768 pixels |
Scanner handpiece QUICKSCAN IOS Full Color Powder Intraoral Scanner The scanner handpiece captures a series of 2D images of the patient anatomy, and constructs a 3D model. The scanner is composed of optical imaging systems. The left end of the handpiece shown below has protective glass. Scanner head： The scanner head is attached to the left end of the handpiece. It is made of plastic, medical steel and a mirror. The scanner head can be sterilized using the prescribed method. Base: Holds the scanner handpiece when not in use. Includes a heater to defog the scanner head. Connects the scanner handpiece and the computer. Cables: White micro-USB cable - Used to transmit the output signal from the scanner handpiece to the base. Black USB 3.0 cable：Used to transmit output signals from the base to the computer. Power Adapter：12V= 1.25A Medical certification power adapter. Technical Specifications: CMOS: 13 x 13mm Pixel Size：1024 X 768 pixels Scope of reconstruction：14 x 14 x 15 mm Intensity of light radiation： ≤ 100mW/cm Size of scanner handpiece including head:244 x 48 x 27mm Micro USB data cable length from handpiece to base: 1.9m USB 3.0 data cable length from base to PC：1.2m PC minimum requirement: OS: Microsoft Windows 10 64bit home or above CPU：Intel i7-6700 Quad-core processor or above Graphics card and video memory: NVIDIA GeForce 960GT or above graphics card, more than 2G *Memory：16G or higher * Display resolution：1920x1080 *USB port： USB2.0/3_0 Equipment operating environment： a} environment temperature：10 ℃ -40℃ - b) Relative humidity：≤ 85%;
c} atmospheric pressure：86KPa~106KPa; Equipment storage, transportation environment: a} environment temperature：-20℃ --55℃ - - b) Relative humidity：10%~93%;
c} atmospheric pressure：86KPa~106KPa; Power - a) Power voltage：110V or 220V
- b) Power consumption：2SVA
Package Contents: | No. | Component | | 1 | Scanner handpiece | | 2 | Scanner head | | 3 | Base | | 4 | Black data cable USB 3.0 | | 5 | White micro USB cable | | 6 | Power adapter（12V） | | 7 | Software on Denterprise USB card | | 8 | User Manual | | 9 | Superdog USB key software license |
| 3Shape Trios Cart T12a Impression 3D Intraoral Scanner3Shape TRIOS is a next-generation intraoral impression solution that is fast, accurate and easy to use. TRIOS is built on 3Shape’s Ultrafast Optical Sectioning™ technology and its features include high accuracy capture, spray- and powder-free scanning, clinical scan validation, intuitive Smart-Touch user interface, and more. TRIOS is optimized for a wide range of indications.TRIOS scanner benefits and features:
-Up to 1000 3D pictures for true geometries
-Spray-free for optimal accuracy and comfort
-Designed for high-speed impression capture
-Ergonomic grip for perfect control
-Autoclaveable scanner tip
-Scanning has never been easier. No need to hold the scanner at a specific distance or angle for focus. Dentists or assistants can even rest the scanner on the teeth for support as they scan.TRIOS cart benefits and features
-Live 3D visualization
-Easy-to-use touch screen
-Sleek design
-Unique motion sensor interface
-Mobility and Wi-Fi
-Easy-to-clean
-General benefits of digital impression takingDENTISTS:
-Less adjustment and grinding during seating
-Improved accuracy and clinical results
-Faster than traditional impression taking
-Reduced need for retakes
-No impression materials and mess
-Cost savings related to materials and shippingPATIENTS : 3Shape Trios Cart T12a Impression 3D Intraoral Scanner
-Quick and comfortable experience
-Better restoration fits and minimal grinding
-Improved clinical results
-Reduced number of appointments due to fewer retakes
-Reduced over-all chair-time3.5 Tips to Obtaining a Good Scan
PREPARATION
1. Turn on the cart or PC in advance to allow the system to heat up. See section Heating and
Mounting the Scanner Tip, step 1. Allow the system to warm up for about 10 minutes prior to use. If
using the heater, the final temperature is reached when the light goes out.
2. Retract the gingiva around the preparation for the preparation to stand out clearly.
3. Make sure the scanner tip is warm to avoid condensation on the mirror. See section Heating
and Mounting the Scanner Tip, step 5.
SCANNING
1. Dry the teeth lightly using compressed air. Be sure to reach the narrow regions between teeth.
Consider using a saliva ejector and/or tampons.
2. Get a good start:
• Start at preparation (or 1st molar if antagonist).
• Wait for about 5 scanner "clicks" before proceeding (helps build up a good starting point).
• Complete preparation including preparation line.
• Scan neighboring teeth: Occlusion, lingual/palatinal side, buccal/labial side.
3. Keep scanner head at 0-5mm from the teeth, it is OK to touch the teeth occasionally.
4. Move the scanner slowly and smoothly, you should hear a more rapid clicking sound.
41
5. Keep lips, cheeks, and tongue out of the scanner’s view:
• Use your finger or a dental mirror to create space between the teeth, lips and cheeks.
• Use a lip-and-cheek-retractor to keep lips and cheeks away.
• Be careful not to scan your own or assistant’s fingers.
• If you get lips, cheeks or tongue in the scan, make sure to delete it all, especially where they have
contact with the teeth (no surfaces should stick out from the teeth).
6. Keep focus on:
• Option 1 - Look at the teeth while scanning and listen to the "clicks". If it stops clicking/capturing,
carefully move back to the area marked on the screen.
• Option 2 - Look at the 2D image at the lower right corner. What you see here is what you scan.
Avoid lips, cheeks and the tongue to get an easy scan.
7. When scanning is complete, inspect the result by rotating the scan.
The important areas are:
• Preparation line (avoid interference from gingiva, saliva, blood).
• Contact points.
• Occlusal surfaces.
• If an important area is missing, simply touch this area on the model, and re-start scanning from
this point.
8. Bite Scan:
• Start from the second molar or at canine if you make an anterior scan.
• While centering the 2D image on occlusion plane, slowly move the scanner tip in straight mesial
direction with equal coverage of the upper and lower teeth.
• Scan 4 teeth for optimal alignment. This should take no more than 5 seconds.
9. Important for good colors:
• Avoid the light from the dentist chair lamp pointing directly into the patient's mouth. | SIUI CTS-800 Veterinary Ultrasound Machine with Linear Rectal Probe
This small and convenient “Palm-Sized” portable veterinary ultrasound scanner fits in the palm of your hand, and is mostly used for farm animals. Its long battery life and waterproof features makes it the perfect ultrasound scanner for veterinarians on the field.The screen of the SIUI CTS-800V will rotate horizontally or vertically, according to how you are holding it.Gravity Sensor: You can operate the ultrasound system either in transversal layout or vertical layout. It can automatically adapt to two different layouts when you rotate it.Grid for estimation: With grid on the image area you can easily estimate the size of the target substance like follicle fertilized egg etc.SPECIFICATIONS SIUI CTS-800 Veterinary Ultrasound Machine with Linear Rectal ProbeMonitor: 7-inch WVGA LCD monitorWeight: 0.8kg Environmental rating: IP54 (main unit) IP67 (probe head) Battery: 3 hours operation time Display mode: B 2B ZOOM B B/M M Depth: Max to 250mm B gain: 0-100 Image storage: 256 frames Cine loop: 256 frames Probe: L50/7.5 MHz linear rectal probe (standard) L65/5.0 MHz linear rectal probe (optional) R20/5.0 MHz micro convex probe (optional)
– Main unit with 7-inch LCD monitor.
– 1 Probe connector.
– 1 Li-ion battery. 3 hours operation time.
– 1 Adaptor.
– 1 Car Charger.
– Belt and sun shield.
– 1 USB port (Mini).
– Carrying case.PROBES– Rectal Linear L7FVC (6.5/7.1/7.5/8.3/9.0MHz).
– Rectal Linear L5FVC (4.0/4.7/5.0/5.5/6.2MHz).
– Backfat Linear L1FC (150mm, 2.5/3.0/3.5/4.0/5.0MHz).
– Convex C3FC (2.5/3.0/3.5/4.0/5.0MHz).
– Microconvex C5FC (3.5/4.0/5.0/6.5/7.1MHz).CTS-800 is a palm-sized veterinary ultrasound system. Features Weight: 0.8kg Environmental rating: IP54 (main unit) IP67 (probe head) Battery: 3 hours operation time Display mode: B 2B ZOOM B B/M M Depth: Max to 250mm B gain: 0-100 Image storage: 256 frames Cine loop: 256 frames Probe: L50/7.5 MHz linear rectal probe (standard) L65/5.0 MHz linear rectal probe (optional) R20/5.0 MHz micro convex probe (optional) | Carestream CS 3600 Intraoral ScannerAcquire true color:With the CS 3600 Intraoral Scanner, practitioners can access 2D and 3D images that can be used with CS Restore software to design restorations within their practice. Colored 3D scans allow practitioners to easily define the margin lines and identify the differences between natural tooth structure and existing restorations. This makes restoration planning more accurate for practitioners.No external heater, powder or trolley system needed:The CS 3600 does not require you to spray powder of liquid over the patient’s teeth or gingival tissue before scanning. It features high-angulation scanning of up to 45 degrees and to a depth from -2 to +13m.Features a unique light guidance systemYet another feature of the CS 3600 that assists it in the capture of the data during the image acquisition process. This feature allows the user to place more focus on the patient’s mouth rather than the monitor.This device is easily shared:The CS 3600 can be easily shared between operatories because there is no heavy trolley to push around. Additionally, the intraoral scanner connects via USB 2 cable* to any PC workstation or laptop. * Windows 7, 32-bit minimum; 64-bit recommendedEasy to use and hold:The CS 3600’s sleek, lightweight design (295 grams) makes it comfortable and easy for users to navigate the intraoral scanner around patients’ mouths, especially during full arch acquisitions.Benefits:Carestream CS 3600 Intraoral Scanner- Faster Scan Speed
- Superb Image Quality
- Light Guidance System
- Portable for Easy Sharing
- Lightweight Hand Piece
- Features
- High Speed Continuous Scanning
- Fast, Simple and Smooth user experience
- Freefill Missing Scan Data at your Leisure
- Scan History allows you to remove excess scanned tissue for more refined final digital impression
- Three Workflows
- user friendly interface
- Autoclavable reusable tips in two interchangeable styles
- Accurate full 3D HD Color scanning
| Roland DWX-52DC Dental Milling UnitDWX-52DC
| 5-Axis (Control XYZAB simultaneously) | Milling method：Dry mill | Cuttable material：Zirconia, Wax, PMMA, Composite resin, PEEK, Gypsum | | DWX-52DC | | Cuttable material | Zirconia, Wax, PMMA, Composite resin, PEEK, Gypsum, Fiber reinforced resin, CoCr sinter metal | | Loadable workpiece shape | Step section: | 98.5 mm (diameter), height 10 mm | | Body section: | 95 mm (diameter), height max. 35 mm
Pin diameter: 6 mm | | Pin diameter: | 6 mm | | Loadable workpiece weight | Up to 850 g | | Number of adapters housed | 6 | | Operating speed | XYZ axis: | 0.24 to 70.9 in./min.(6 to 1,800 mm/min.) | | Spindle motor | Brushless DC Motor | | Spindle speed | 6,000 to 30,000 rpm | | Rotary axis travel angle | A: | ±360° | | B: | ±30° | | Number of burs housed | 15 | | Attachable bur | Shank diameter: | 4 mm | | Length: | 40 to 55 mm | | Compatible compressed air | 0.2 MPa | | Interface | USB | | Control command set | RML-1, NC code | | Power requirements | AC 100 V to 240 V ±10%, 50/60 Hz, 2.0 A
(overvoltage category II, IEC60664-1) | | Power consumption | Approx. 200 W | | Operating noise | During operation: | 70 dB (A) or less (when not cutting), | | During standby: | 45 dB (A) or less | | External dimensions | Width x Depth x Height: | 34.6 x 26.0 x 23.6 in. (880 x 660 x 600 mm) | | Weight: | 105 kg (231.5 lbs.) |
The ultimate in ease Roland DWX-52DC Dental Milling Unitmaterial flexibility and unattended production, the DWX-52DCi dental milling machine with automatic disc changer expands your lab production and profit. With a 6-slot Automatic Disc Changer, 15-station Automatic Tool Changer and other automated features, it gives users of all skill levels an exceptionally powerful, efficient and affordable dental restoration solution. |
Reviews
There are no reviews yet.