| Content | Sonendo gentlewave dental laser endodontic root
Sonendo Gentle Wave Dental Laser Endodontic Root Specifications
Manufacturer: Sonendo
Model: Gentle Wave
Serial Number: (Contact Us)
Power Requirements: 100-240V, 50-60Hz
Year: Not available
Laser Style: Cart
Fiber-Optic Trunk Condition:Functional
Laser Type:EndodonticSonendo Gentle Wave Dental Laser Endodontic Root141116 Sonendo 01The GentleWave System gives the clinician options. It can be used either as an adjunct to traditional treatment protocols or as the primary treatment method with “minimum shaping.” Regardless of shaping protocol, the obturation method is performed with the clinician’s preferred technique. Treatment can be simpler, faster, and performed with less iatrogenic potential as GentleWave™ instrumentation protocols can be greatly simplified relative to existing instrumentation concepts. Minimal shaping protocols remove less tooth structure, which could possibly reduce the chance of vertical root fracture while cleaning canals to a degree never before possible. Because it is less technique sensitive, the GentleWave System can contribute to a treatment that may be less stressful and less invasive for the patient.Sonendo’s GentleWave technology is provided by a handpiece connected to a freestanding, ergonomic, mobile console containing a reservoir of sodium hypochlorite, EDTA, and distilled water. The device has a user-friendly interactive screen that guides the clinician through each step sequentially.The GentleWave System automatically cycles the treatment fluids through the device and into the entire canal system in a closed loop environment. As the fluids move through the treatment tip and into the canals, multisonic energy is created. This sonic energy presents in the form of specific wide spectrum wavelengths using different frequencies, aiding greatly in tissue and debris dissolution and removal as well as disinfection of root canals system. Aside from a preoperative system leakage test, at present, the total treatment time is less than 10 minutes.Current methods of endodontic cleaning and shaping are limited, as no current cleaning and shaping technique is able to predictably remove bacteria, biofilm, and tissue from canal systems. In addition, no current instrumentation system touches all canal walls. As a result, bacteria are commonly entombed in the dentinal tubules and isthmuses after endodontic treatment. Today’s “state of the art” is technique-sensitive, operator-sensitive, and greatly affected by anatomic complexity and patient cooperation.1,2Sonendo gentlewave dental laser endodontic rootSonendo Gentle Wave Dental Laser has provided an innovative and unrivaled method designed to create “ultraclean” canals in order to overcome current limitations and challenges. The GentleWave System is capable of removing all tissue, smear layer, biofilm, and bacteria from the tubules to a very deep level that is not typically seen in traditional endodontic treatment.3 | Biolase Epic Pro Dental Soft Tissue LaserThe Epic Pro, which offers the most laser power of any diode laser in dentistry, is the first
product to be introduced resulting from BIOLASE’s strategic development agreement
with IPG Medical. The newest addition to the Epic family of dental soft-tissue lasers, Epic
Pro features several new innovations that are industry-firsts: - A new super pulse technology for more precise, enhanced laser tissue cutting
- Real-time automatic power control to enhance speed and consistency when performing surgery with pre-programed tip temperature
- Pre-initiated, bendable, disposable tips with new smart tip technology to ensure tip performance and quality
Automatic Power Control: Epic Pro cuts four times faster1 than a classic diode laser with
minimal collateral damage. In this treatment mode, the laser in continuous wave mode converts light energy to thermal power at the tip. Laser energy is adjusted automatically in real time to maintain constant tip temperature. The result is extremely consistent and reliable cutting conditions, regardless of speed of movement, tissue type, etc. Super Thermal Pulse: Epic Pro can achieve ten times the peak power of a standard diode (and up to three times that of the closest competitor) laser in short micro-pulses for the highest cutting efficiency and safety. In this treatment mode, the laser converts light energy to thermal power, which it emits as thermal power pulses, (i.e. multiple bursts of high power). Each of these thermal bursts cuts tissue highly efficiently. When the laser is activated, power bursts are emitted with a preset pulse width (duration), while maintaining a precise thermal level at the tip. The laser is powered on only about 3-5% of the time, giving tissue ample time to relax between pulses; creating a safer and gentler experience for patients. 
The Only Laser with Automatic Power ControlEpic Pro is the ONLY FDA-cleared laser with Automatic Power Control, an exclusive innovation from BIOLASE that enables the operator to lase with confidence and speed.
Enhanced Clinical ApplicationsEpic Pro is the professional’s choice for managing soft tissue cases. With over 20 clinical presets, multiple treatment modes, and an advanced mode for expert users, Epic Pro provides unparalleled consistency and predictability. Unlike traditional diodes, Epic Pro moves quickly and with little snag-and-drag resistance.
Greater Precision and ComfortEpic Pro brings more precision and comfort than traditional diodes due to innovations such as Super Thermal Pulse mode, which can pulse energy as quickly as ten-millionths of a second, resulting in efficient clinical cutting with less thermal damage than normal diode lasers.
Introducing Smart Tip TechnologyEpic Pro uses durable new tip technology, available in uninitiated and pre-initiated formats depending on your clinical needs. Epic Pro tips work hand in hand with the laser’s Smart Tip technology to prompt you when a fresh tip is needed.
With Epic Pro, ‘You Have to See It to Believe It’If you are a current diode laser or CO2 laser user, you have to see Epic Pro cut tissue live and compare to your current laser experience. When current Epic Pro customers were first shown Epic Pro, their response? “You have to see it cut to understand how much faster it is.” Fill out the contact form on this page to request a live demonstration for Epic Pro in your clinic.Technical Specifications Biolase Epic Pro Dental Soft Tissue Laser| Dimension | 7.25in (W) x 4.5in (L) x 6.5in (H) (18.4cm x 11.4cm x 16.5cm) | | Weight | 4 lbs (1.8 kg) | | Operating Voltage | 100V – 240V at 1.2A/0.5A | | Frequency | 50/60 Hz | | Main Control | Power Switch | | Remote Interruption | Remote Interlock | | Disable Control | Emergency Stop Button | | DC Power Supply Module | 12V DC, 5A | | Laser Classification | Class IV (4) | | Medium | Semi-conductor diode | | Wavelength | 940nm ± 20nm | | Power Modes | Continuous, Pulse Modulation | | Fiber Tip Diameter | 300µm, 400µm | | Pulse Duration | 10µm-100ms | | Pulse Interval | 0.01ms – 20ms | | Pulse Repetition Rate | Up to 20kHz (for reference) | | NOHD | 4.77 meters | | Beam Divergence | 0.22 | | Standard Fiber Cable Length | 6 feet (1.8 meters) |
| 2019 BIOLASE Waterlase Express Dental Laser With Hand PieceRestorative
– Cavity Preparations
– Sub-gingival decay removal
– TroughingSoft-Tissue
– Achieving hemostasis
– Frenectomy techniques
– Biopsies and lesionsPerio
– REPAIR Perio protocol (all steps)
– Closed crown lengthening
– Flap surgeryImplant
– REPAIR Implant protocol (all steps)
– Implant debridement
– Flap surgeryEndo
– Access, cleaning, and shaping
– Pulpotomy, Pulp Cap
– Disinfection of Root Canal
– Removal of Smear LayerSpecifications:
– Wavelength: 2.78 µm (2780 nm)
– Max. Power Output: 4 W Pulse
– Energy: 200 mJ Pulse
– Rep Rate: 5-50 Hz Pulse
– Duration: H: 60 µsec, S: 700 µsec
– Laser Engine: Miniaturized Er,Cr:YSGG laser engine
– Fiber Optic Cable: White, highly flexible, reliable
– User Interface: Applications-based, removable tablet
– Touchscreen Size: 9.7”x 6” (24.64cm x 15.24cm)
– Pre-sets: 95 procedural presets, with simple slider bar to adjust settings within each procedure
– Additional Content: Procedure animations, case studies, best practices
– WiFi-enabled for BIOLASE Connect: Yes
– Weight: 27 Lbs (12.247 kg)The Waterlase express is the all-tissue laser that will change the way you practice dentistry. Waterlase Express has the power to solve dental problems beyond expectation. The versatile and gentle combination of laser energy and water has the power to relieve dental anxiety at the source, for you, your team, and your patients. The countertop all-tissue laser features a miniaturised laser engine that is 50% smaller than the Waterlase iPlus, offering the benefits of all-tissue laser technology in a way that is compact, simple and easy to use.2019 BIOLASE Waterlase Express Dental LaserWaterlase Express is the only laser to feature an in-depth, step-by-step, 4K HD animation for every step of every procedure. No matter your level of expertise, from beginner to advanced user, the Waterlase Express animation library is a dazzling, informative training resource.– 95 clinical presets for soft tissue, hard tissue and bone.
– Step-by-step procedure animations.
– Removable tablet with easy-to-use touchscreen interface.
– Loaded system menu features on-board reference material.
– H MODE – 60 microseconds – a cooler mode for cutting enamel and all other applications.
– S MODE – 700 microseconds – a hotter mode for coagulation.
– Stay up-to-date and connect with fellow users, clinical mentors and online training directly from the unit.
– Customer care access for direct help when needed.
– Sturdy handle for easy transport makes the Waterlase express conveniently portable.
– Wireless footswitch for easy integration.
– Light and flexible SureFire trunk fibre ensures minimal resistance and treatment fatigue.
– Over 2 hours of 4K-Ultra-HD learning content | Medit T710 Blue Light Dental Scanner
Introducing the New and Improved T-Series Lab Scanners
Medit have completely overhauled the design of their T-Series lab scanners. The result is a sleek and sophisticated dental scanner which not only does its work well, but in style.The Medit T710 desktop scanner is equipped with a fast scan engine and highly efficient software algorithm which work in tandem to produce a full-arch scan in just 8 seconds. The advanced, high-speed positioning system of the new T-Series is designed for optimal performance for your laboratory, speeding up your workflow and increasing productivity.The T710, with its new four 5.0MP-resolution cameras system and blue-light scanning technology, ensures your models and impressions are fully scanned, eliminating all blind spots.Flexible multi-die scanning
2 StepsT710 Specifications
Accuracy 4μm
Full Arch Scan 8 seconds
Full Arch Impression Scan Speed 45 seconds
Colour Texture
Auto-elevation
Let the scanner decide the scanning height for your object with our auto-elevation feature.
Wider Scan Area
Scan more objects at the same time thanks to the wider scan area of our T-Series tabletop scanners!
No Blind Spots
The 4 cameras in the T710 are positioned in a way to ensure that there are no blind spots in your scan data. It only takes one scan to get the full data!
Full-size articulator scanning
To reproduce the exact occlusion orientation, nothing beats scanning the occlusion in the articulator itself. We’ve designed our T-Series to accommodate any articulator available in the market, comfortably.
Replica Denture Included
Orthodontic Scanning Included
Impression Scanning IncludedMedit T710 Blue Light Dental Scanner- ultra-fast scanning of a dental arch in only 8 seconds
- scanning speed for a complete jaw impression is only 45 seconds
- color texture available
- accuracy of 4 µm
- open System
- 5.0 megapixel camera enables high-resolution and detailed scan data
- four-camera system for a large scanning area without blind spots
- automatic height adjustment for optimal scan Position
- flexible multi-die scanning
- complete scan in the articulator possible with the 3-in-1 KAS holding device for KaVo, Artex and SAM
- the AM holding device is compatible with the MARK330 and BIOART A7+ articulators - thus the use of the exocad software is possible
- orthodontic scanning and impression scanning possible
| QuickRay USB Size 1 And 2 X-Ray Sensor
QuickRay USB is a breakthrough in digital X-rays. The embedded electronics are located in the sensor case so there is no interface box! Simply connect the sensor cable via its USB connector to your computer and go! QuickRay USB is currently compatible with these Apteryx based software systems: XVa3, XVLite, Cliniview, Clinitouch, XDR Imaging, MPDX-DMD, Lightyear, DentiMax, ProfSuni, Dr. Suni, Sigma, AFP Digital and Belmont.Great value QuickRay USB digital X-ray sensors connect directly to USB— no interface box needed!Are you paying too much for digital X-ray sensors and warranties? Consider QuickRay from Video Dental Concepts! A dental imaging leader and innovator since 1989, VDC has provided over 7,000 dental professionals with the best diagnostic imaging values and personalized support for over 20 years.QuickRay USB Size 1 And 2 X-Ray Sensor For SaleQuickRay USB is a breakthrough in digital X-rays. The embedded electronics are located in the sensor case so there is no interface box! Simply connect the sensor cable via its USB connector to your computer and go! QuickRay USB is currently compatible with these Apteryx based software systems: XVa3, XVLite, Cliniview, Clinitouch, XDR Imaging, MPDX-DMD, Lightyear, DentiMax, ProfSuni, Dr. Suni, Sigma, AFP Digital and Belmont.The QuickRay sensor gives you the highest resolution and clarity! The thin (less than 1/4″) intraoral sensors include a CMOS image sensor chip, CsI Scintillator, electronic circuits, shielding foils and shock absorbers. Tough polyamide housings have durable replaceable polyurethane cables with ergonomically placed connectors. Their rounded corners and smooth edges optimize patient comfort.
And QuickRay is the fastest sensor on the market! View X-rays in USB 2.0 High Speed Mode in only 3 seconds. Operate in USB 2.0 Full Speed Mode, if necessary.Every sensor is covered by the VDC two year warranty with no annual fees. Technical support is available for an additional fee on an annual basis. Optional pro rata warranty is available from VDC after purchase. All VDC products are FDA registered. | CEREC Primescan AC Intraoral scannerCerec Primescan from Dentsply Sirona is the most advanced digital scanner on the market. It’s providing a level of accuracy never before seen in dentistry. At the peak of innovation, it is widening the gap between those with and without digital dentistry. The Prime Scan is the fastest most accurate intraoral scanner to date. With new scanning technology, it is the ultimate in scanning. Prime Scan and CEREC 5.0 combinations are greatly reduced because more data allows many applications to become automated.For more than 30 years, CEREC® has provided technological precision, superior design and excellent performance to thousands of practices. Now, experience a brand-new fully integrated solution with CEREC Primescan AC. Acquire precise digital impressions with Primescan, design your proposal on the Primescan AC using the intelligent software, then produce precise, smooth restorations with your choice of milling unit. Find the next level of productivity and patient care – it’s all here. How Does CEREC Primescan Work?
CEREC Primescan is an alternative to traditional intraoral dental impressions, which use a putty-like substance to take physical impressions of your teeth. This method does not allow for digital assessment of your mouth, and some patients find it the process of physical impressions to be uncomfortable.CEREC Primescan uses a wand-like device, loaded with powerful imaging sensors which can capture more than 50,000 images of your mouth per second. These images are quickly stitched and compiled into a 3D image of your teeth, jaw, gums, and mouth, and displayed on a high-definition screen for immediate assessment by our doctors.Using this sensor, our doctors can image your entire mouth up to 20mm in depth, including gums, blood, and bone structures, quickly and accurately. The Primescan software (as compared to the Omnicam) creates high-resolution 3D models to assess your oral health and create the very best crowns, implants, removable prosthesis, restorations, and even 3D prints. With just a few quick sweeps of the CEREC Primescan device, we’ll be able to generate an in-depth, modifiable 3D image of your mouth in minutes. The Benefits of CEREC Primescan:
 An excellent choice for outstanding results: Primescan is your perfect starting point in digital dentistry. No matter how you would like to design your workflows, Primescan is the enabler for efficient digital workflows – both chairside in your practice and with your preferred partners.Well designed and perfectly compatible: Along with the high-performance intraoral scanner comes the new Acquisition Center. Together, they form a highly effective and most comfortable system – meeting your needs with two individual software configurations:So, why is CEREC Primescan such a big deal? Here are just a few improvements to this sophisticated system: Shorter wait times – We can quickly image your mouth without waiting for dental impressions to set, allowing us to treat each patient more quickly and effectively. A full jaw impression only takes 2 minutes. This adds up to less time spent in the dental chair. Real-time image processing – Our dentists can quickly adjust and modify scanned images using filters and other tools, leading to more accurate diagnostics and better overall patient outcomes. Extremely versatile – CEREC Primescan can be used for almost any dental procedure. From implant dentistry to the creation of CEREC same-day crowns, the straightening of teeth, whitening, development of dentures and partial dentures.CEREC Primescan AC with CEREC Software Sirona Advantages:- Enables all kinds of treatment, from a single tooth to full arch
- With Primescan intraoral scanning is now more accurate, faster and easier
- Allows an efficient workflow, both chairside and with preferred partners
- Along with the high-performance intraoral scanner comes the new Acquisition Center, together forming an effective and most comfortable system, meeting your needs with two individual software configurations: Primescan AC with Connect Software (supports the connection to established partners workflows) and CEREC Primescan AC with CEREC Software (ideal for cabinets)
- Smart Pixel Sensor technology – allows superior precision and excellent detail reproduction, processes more than 1 million 3D points per second, producing photorealistic and highly accurate data
- Due to its ability to scan at an incredible data density, it delivers complete 3D structures of everything in its field of view
- Its dynamic depth scan technology enables perfect sharpness and outstanding precision, even at a measuring depth up to 20 mm
- Easy to use
- Easy scanning of all dental materials and hard to access areas
- Allows you to start scanning right away
- Self-heating for fog-free scanning
- The increased field of view visualizes larger areas with fewer sweeps and immediate precision
- Faster scanning with a smooth scan flow
- Consolidating more than 50.000 images per second and fast processing of exactly the data the software needs Easy capturing and quicker processing of more data in higher resolution
- Complete 3D-scan models are displayed immediately, no matter how fast you scan
- Accelerate your workflow: Due to seamless, validated and open data transfer options, labs and other third parties are supplied with high-resolution models at an instant
- 3 different sleeves (disposable and stainless steel, with sapphire glass or autoclavable)
- Acquisition Center – Smart features and greater comfort: intuitive use via movable 16:9 touchscreen and touchpad for perfect ergonomics
- Kinematics for perfect ergonomic positioning
- Smart Hygiene concept for fast and easy disinfection
- Full mobility with more than 60-min. battery buffer
- CEREC Primescan AC with CEREC Software – complete chairside system, which offers flexible data export options, with automatized workflow thanks to Artificial Intelligence and touch-enabled and intuitive user interface
Milling Unit:• Choose from CEREC MC, CEREC MC X or CEREC MC XL
• Get access to the entire range of chairside treatment with up to 40 mm block size, including bridges and abutments
• Create fully anatomic, precise treatments quickly
• CEREC Guide 2 surgical guide
• Dry mill ready
• Includes CEREC softwareStriking in every detail: The new Acquisition Center  The new Acquisition Center is a work station designed for modern dentistry and with the dentist in mind. It comes with a touchpad and a 16:9 wide-format movable touchscreen, offering you a highly intuitive and ergonomic work platform. Your benefits at a glance:- Touchscreen & Touchpad for most comfortable, intuitive use
- Kinematics for perfect ergonomic positioning
- Smart Hygiene concept for fast and easy disinfection
- Mobility concept for full mobility with more than 60-min. battery buffer
The best choice for your practice: Take digital impressions and continue working with your trusted partners or enjoy the benefits of complete chairside workflows.Primescan meets your needs with two individual software configurations: Primescan AC with Connect Software:- Supports data transfer options to your preferred partners
- Secure and encrypted data transfer through Connect Case Center Inbox
- Easy upgradability to full chairside workflow
- Touch-enabled and intuitive user interface
CEREC Primescan AC with CEREC Software:- Supports full chairside workflows for single-visit dentistry
- Flexible data export options
- Automatized workflow thanks to Artifical Intelligence
- Touch-enabled and intuitive user interface
Technical Data:CEREC Primescan AC Intraoral scanner- CAD system for high-precision intraoral optical impressions
- High-resolution, heated intraoral 3D scanner
- Integrated image processing
- High processing power due to state-of-the-art processor
- Trackball or touchpad
- Hand and foot controlled enter keys
- Ethernet port and WLAN
- USB interfaces
- The high-resolution 3D intraoral scanner allows image acquisition with the image control inside the scanner, the image data transfer is made through USB 2.0 interface
- 21.5″ inch TFT LED flat-screen display, HD resolution: 1920 x 1080 pixels
- Mobile housing, with no water or air connection required
- Voltage: 100 – 240 VAC/50-60Hz
- Nominal current: 5.0 – 2.1 A
- Type of protection against electric shock: Class I device
- Waterproof: no
- Degree of contamination: 2
- Installation category: II
- Operating mode: continuous
- Dimensions W x H x D: 408 (537) x 1190 x 443mm
- Total weight: 38kg
- Weight without monitor and battery: 31kg
- Weight without battery: 36kg
PC components:- Processor: Intel
- RAM: 32GB RAM
- Hard disks: 1x PCIe SSD + 1x SATA HDD
- Network card: Ethernet 10/100/1000MBit/s
- Operating system: Windows 10, 64 bit
- Installation OS: pre-installed, from the factory
Transportation and storage conditions:- Temperature: -25°C – + 60°C
- Relative humidity: 10% – 75%
- Air pressure: 700hPa – 1060hPa
Operating conditions:- Temperature: 10°C – 35°C
- Relative humidity: 30% – 85%, no condensation
- Air pressure: 700hPa – 1060hPa
- Operating altitude: up to 3000m
Delivery form:- CEREC Primescan AC with CEREC Software – 1 piece
|
Reviews
There are no reviews yet.