| Content | Schick CDR PanX Laser
FeaturesCDRPanX features proven Schick CDR digital imaging technology and renders crisp, clinically accurate images
Only slightly more expensive than most film-based systems, CDRPanX eliminates costly panoramic film and processing – increasing your economic efficiency
Eight different imaging modes and three laser alignment beams for optimal exposures
Superior vertical travel allows it to be used with patients of any height, including those in wheelchairs
Patient Positioning: 3 laser alignment beams (mid-sagittal, Frankfort, focal trough) bite guide, chin rest, optional temple support
SpecificationsGenerator: Multipulse DC
X-Ray Tube: OCX105
Focal spot size: 0.5 IEC 336
Minimum total filtration: 2.5 mm Al
Anode Voltage: 60-86kV (2kV increments)
Anode Current: 4, 5, 6.3, 8, and 10mA
Exposure time: 19s – adult panoramic
Power Supply: 115V, 50/60Hz
Fusing: T8A
Weight: 474lbs
Electrical Safety Classification: Class 1, type B
Imaging modes (Exposure times): adult (19s), child (15s), left half (10s), right half (10s), anterior (8s), TMJ opened and closed (4x4s), frontal sinuses (8s)
Patient Positioning: 3 laser alignment beams (mid-sagittal, Frankfort, focal trough) bite guide, chin rest, optional temple supportFeatures- CDRPanX features proven Schick CDR digital imaging technology and renders crisp, clinically accurate images
- Only slightly more expensive than most film-based systems, CDRPanX eliminates costly panoramic film and processing – increasing your economic efficiency
- Eight different imaging modes and three laser alignment beams for optimal exposures
- Superior vertical travel allows it to be used with patients of any height, including those in wheelchairs
- Patient Positioning: 3 laser alignment beams (mid-sagittal, Frankfort, focal trough) bite guide, chin rest, optional temple support
Specifications Schick CDR PanX Laser| Generator: | Multipulse DC | | X-Ray Tube: | OCX105 | | Focal spot size: | 0.5 IEC 336 | | Minimum total filtration: | 2.5 mm Al | | Anode Voltage: | 60-86kV (2kV increments) | | Anode Current: | 4, 5, 6.3, 8, and 10mA | | Exposure time: | 19s – adult panoramic | | Power Supply: | 115V, 50/60Hz | | Fusing: | T8A | | Weight: | 474lbs | | Electrical Safety Classification: | Class 1, type B | | Imaging modes (Exposure times): | adult (19s), child (15s), left half (10s), right half (10s), anterior (8s), TMJ opened and closed (4x4s), frontal sinuses (8s) | | Patient Positioning: | 3 laser alignment beams (mid-sagittal, Frankfort, focal trough) bite guide, chin rest, optional temple support |
| BEGO LASERSTAR T DENTAL LABORATORY LASER SYSTEMThe product is a welding unit which is powerful and compact device. The features provided are user friendly of device. The welding energy is controlled with pulse time, adjustable focus and charging voltage provides perfect welding. The control arrangement and the comfortable design help in working suitably and without being tired. The large touch screen color display offers easy operation and intuitive navigation. The product uses pulse shaping for crack-free joints and high strength stress.- Technology:laser
- Applications:dental laboratory
BEGO LASERSTAR T DENTAL LABORATORY LASER SYSTEM Quick and efficient working
With laser welding, you can reduce the time required by up to
80% since solder preparation and the use of welding flux is not
necessary: A soldering model is not required – work can be
conveniently performed directly on the master model.
The advantages for you:
• Time savings with laser welding as a state-of-the-art joining
technology
• Protection of resources since additional soldering materials are
not requiredBEGO LASERSTAR T DENTAL LABORATORY LASER SYSTEM Large colour touch display
The LaserStar T plus is operated and controlled using a 5.7 inch
colour touch display which offers quick response times and
simple menu navigation The large active area of 5.7 inches as
well as the simple menu navigation present a real improvement
in terms of operation compared to more conventional concepts.
The advantage for you:
• Convenient, intuitive operationBEGO LASERSTAR T DENTAL LABORATORY LASER SYSTEM Maximum stability and biocompatibility
Compared to soldered connections, the joints created with deep
welding are high-strength, as well as being mechanically far
more resilient and durable.
By not using base solder, real laser welding enables a homogeneous alloy structure to be created and galvanic corrosion to be
effectively prevented.
The advantage for you:
• Additional safety and reliability for your customers and patientsPrecise welding
The adjustable focus of 0.2 – 2.6 mm ensures high-strength
joints by means of targeted punctual welding, even with thin
orthodontic wires or in interdental spaces.
Regardless of whether bridge or supra constructions: Compared
to soldering, laser welding guarantees far great accuracy of fit.
The advantage for you:
• Perfect welding results for a large range of indicationsEco mode
• The unit switches off all unnecessary components in idle mode.
• The unit can be restarted in less than 1 second at any time.
• Consumption of just 10 W in Eco mode compared to 200 W in
standby mode.
The advantages for you:
• Active reduction of lamp wear and tear
• Reduction of operating costs | Sonendo gentlewave dental laser endodontic root
Sonendo Gentle Wave Dental Laser Endodontic Root Specifications
Manufacturer: Sonendo
Model: Gentle Wave
Serial Number: (Contact Us)
Power Requirements: 100-240V, 50-60Hz
Year: Not available
Laser Style: Cart
Fiber-Optic Trunk Condition:Functional
Laser Type:EndodonticSonendo Gentle Wave Dental Laser Endodontic Root141116 Sonendo 01The GentleWave System gives the clinician options. It can be used either as an adjunct to traditional treatment protocols or as the primary treatment method with “minimum shaping.” Regardless of shaping protocol, the obturation method is performed with the clinician’s preferred technique. Treatment can be simpler, faster, and performed with less iatrogenic potential as GentleWave™ instrumentation protocols can be greatly simplified relative to existing instrumentation concepts. Minimal shaping protocols remove less tooth structure, which could possibly reduce the chance of vertical root fracture while cleaning canals to a degree never before possible. Because it is less technique sensitive, the GentleWave System can contribute to a treatment that may be less stressful and less invasive for the patient.Sonendo’s GentleWave technology is provided by a handpiece connected to a freestanding, ergonomic, mobile console containing a reservoir of sodium hypochlorite, EDTA, and distilled water. The device has a user-friendly interactive screen that guides the clinician through each step sequentially.The GentleWave System automatically cycles the treatment fluids through the device and into the entire canal system in a closed loop environment. As the fluids move through the treatment tip and into the canals, multisonic energy is created. This sonic energy presents in the form of specific wide spectrum wavelengths using different frequencies, aiding greatly in tissue and debris dissolution and removal as well as disinfection of root canals system. Aside from a preoperative system leakage test, at present, the total treatment time is less than 10 minutes.Current methods of endodontic cleaning and shaping are limited, as no current cleaning and shaping technique is able to predictably remove bacteria, biofilm, and tissue from canal systems. In addition, no current instrumentation system touches all canal walls. As a result, bacteria are commonly entombed in the dentinal tubules and isthmuses after endodontic treatment. Today’s “state of the art” is technique-sensitive, operator-sensitive, and greatly affected by anatomic complexity and patient cooperation.1,2Sonendo gentlewave dental laser endodontic rootSonendo Gentle Wave Dental Laser has provided an innovative and unrivaled method designed to create “ultraclean” canals in order to overcome current limitations and challenges. The GentleWave System is capable of removing all tissue, smear layer, biofilm, and bacteria from the tubules to a very deep level that is not typically seen in traditional endodontic treatment.3 | QuickRay USB Size 1 And 2 X-Ray Sensor
QuickRay USB is a breakthrough in digital X-rays. The embedded electronics are located in the sensor case so there is no interface box! Simply connect the sensor cable via its USB connector to your computer and go! QuickRay USB is currently compatible with these Apteryx based software systems: XVa3, XVLite, Cliniview, Clinitouch, XDR Imaging, MPDX-DMD, Lightyear, DentiMax, ProfSuni, Dr. Suni, Sigma, AFP Digital and Belmont.Great value QuickRay USB digital X-ray sensors connect directly to USB— no interface box needed!Are you paying too much for digital X-ray sensors and warranties? Consider QuickRay from Video Dental Concepts! A dental imaging leader and innovator since 1989, VDC has provided over 7,000 dental professionals with the best diagnostic imaging values and personalized support for over 20 years.QuickRay USB Size 1 And 2 X-Ray Sensor For SaleQuickRay USB is a breakthrough in digital X-rays. The embedded electronics are located in the sensor case so there is no interface box! Simply connect the sensor cable via its USB connector to your computer and go! QuickRay USB is currently compatible with these Apteryx based software systems: XVa3, XVLite, Cliniview, Clinitouch, XDR Imaging, MPDX-DMD, Lightyear, DentiMax, ProfSuni, Dr. Suni, Sigma, AFP Digital and Belmont.The QuickRay sensor gives you the highest resolution and clarity! The thin (less than 1/4″) intraoral sensors include a CMOS image sensor chip, CsI Scintillator, electronic circuits, shielding foils and shock absorbers. Tough polyamide housings have durable replaceable polyurethane cables with ergonomically placed connectors. Their rounded corners and smooth edges optimize patient comfort.
And QuickRay is the fastest sensor on the market! View X-rays in USB 2.0 High Speed Mode in only 3 seconds. Operate in USB 2.0 Full Speed Mode, if necessary.Every sensor is covered by the VDC two year warranty with no annual fees. Technical support is available for an additional fee on an annual basis. Optional pro rata warranty is available from VDC after purchase. All VDC products are FDA registered. | Biolase Waterlase MDX All Tissue LaserThe MDX delivers 300 mJ of energy at 8 W, and it can easily be upgraded to a 450 mJ (9 W) model for 50% faster cutting as clinical skills improve and applications expand (see ?MDX Specs?). This next-generation of the best-selling WaterLase MD features improvements to the laser engine and delivery system ergonomics, and it enables rapid hardtissue cutting speed with unprecedented affordability.Time-Tested Technology Biolase Waterlase MDX All Tissue LaserThe MDX is built on the technologies and reputations of its predecessors, the BIOLASE WaterLase MD and WaterLase iPlus all-tissue lasers.The Waterlase MD features Hydro- Photonics?a combination of YSGG laser energy and water?which allows the clinician to perform a wide range of conventional procedures with less anesthetic. Known for its precision and accuracy, the MD enables treatment of targeted areas of both tooth structure and soft tissue while maintaining the structural integrity of the tooth and leaving surrounding areas unaffected.The Waterlase MD became the company?s flagship product, breaking new ground in the areas of cutting speed, user interface, and ergonomic design. In 2011 that ?flagship? designation was overtaken by the company?s new WaterLase iPlus, an even faster, more powerful machine. It delivers up to 10 W of power at 600 mJ, which makes it the most powerful laser on the global market at the short pulse length of 50 ?s, all through a highly intuitive preprogrammed user interface for everything from routine restorative cases to specialty periodontal, cosmetic, and endodontic procedures.The iPlus features Biolase?s 2780 nm YSGG technology with the versatility of a dual-wavelength configuration; namely, an integrated iLase 940 nm diode laser to handle unexpected soft-tissue cases, better bleeding control, and the potential for temporary pain relief and teeth whitening. As anticipated, the iPlus proved beneficial for experienced laser dentists who had been anxiously awaiting a machine that would deliver more power, control, and versatility. However, the new laser also provided many of the ?uninitiated? with an easier-than-expected, highly intuitive introduction to all-tissue laser dentistry. The MDX takes this one step further, with a price point that puts the technology within reach of nearly any dentist.
No More Excuses: Affordable Pricing, Substantial ROIThe perception of all-tissue laser technology as inaccessible to most dentists is beginning to dissipate. Even so, some dentists remain unconvinced.The reality, however, is that BIOLASE?s positioning of the MDX as an entry-level product, starting under $40,000, has made the technology much more affordable. Combining better and more efficient manufacturing with strategic sourcing of components results in pricing that most clinicians will view as extremely reasonable. In addition, the initial investment will be recouped with a substantial ROI, which can be realized via 3 main areas of application.1. For hard-tissue restorative dentistry? the ?bread and butter? of general practices?the MDX will enable faster, more efficient and, in most cases, virtually painless restorations for all cavity classes in both adults and children.2. The MDX allows dentists to retain patients who may have traditionally been referred out for osseous crown lengthening. Using the MDX, patients reap the benefits of considerably more comfortable soft-tissue procedures without the inconvenience of a referral, while the practice reaps the benefits of a happier and more loyal patient base.3. MDX provides an effective and efficient gateway into periodontics. Specifically, the MDX promotes deep pocket therapy with new attachment and is especially effective for minimally invasive removal of both subgingival inflamed tissue and calculus in patients with moderate to severe periodontal disease.Another DimensionBIOLASE?s comprehensive in-office and online training and support promise to render the learning curve extremely manageable. And, as intimidation is replaced by both comfort and confidence, clinicians will find that all-tissue laser technology will add a new and profitable dimension to their practices. | 3Shape E4 Dental Lab ScannerThe E4 is a dental 3D scanner produced by 3Shape. 3Shape is a 3D scanner manufacturer based in Denmark.E4 dental scanner main features- Full arch scan in 9 seconds
- 4-micron accuracy
- Four 5-MP cameras
- Color acquisition
3SHAPE E4
Ultimate productivity with our fastest scanner ever
For those seeking the speed and accuracy to drive lab productivity and growth, look no further. The E4 boasts double the speed, double the accuracy, and double as many cameras as its predecessor the E3, delivering improved efficiency and consistency with every scan. From small labs seeking the best-of-the-best, to high-volume, full-service labs striving for a leaner workflow, our E4 lab scanner is the right choice for you.
4 micron
Scan with an accuracy of 4 microns (ISO 12836) for great case results. Combine this precision with increased speed and you can take on more implant cases, for example.
4 cameras
Four cameras save you time by scanning dies in the model instead of individually. You can even scan impressions instead of producing a gypsum model or combine impression and die at the same time.
5MP cameras
5MP cameras are super high definition cameras. They record 5 megapixel images with enhanced camera sensors, meaning you get superior image clarity and can do high-precision scanning.
HARDWARE SPECIFICS
The E4 is a marriage of iconic 3Shape design and superior technical specifications.
Cameras
Four 5 MP cameras enables efficient die scanning and impression scanning, improving your workflows by saving time
Accuracy
4 microns (ISO 12836), giving you the accuracy and precision you need for implant cases
Full arch scan speed 9 seconds (versus 22 seconds for the 3Shape E3)
Full arch impressions scan speed 45 seconds
Texture Color
Scanning strategy Die-in-model |
Reviews
There are no reviews yet.