| Description | Features & Benefits- LIGHTWEIGHT– Less then 5lbs.
- SAFE – ZERO leakage design makes Maxray Cocoon safe.
- RECHARGEABLE – One charge….takes hundreds of x-rays.
- ECONOMICAL – One Maxray Cocoon unit does the work of multiple x-rays systems. Improves your workflow in your office, its fast and convenient.
- PRACTICAL – Handheld design allows operator to stay with the patient during procedure…It’s like taking a picture!
- SIMPLE – No big bulky arms, backing plates for walls, special cabinets or costly electrical hookups.
- VERSATILE – The Maxray Cocoon Portable Handheld Unit can go with you anywhere. From one office to another!
| The new highly accurate 0.5 mm milling tool reliably delivers first class clinical results. Switch to Extra Fine milling mode for a higher level of detail with occlusal fissures and interdental areas on bridges. | Economical pressing and firing performance. Top quality results. | Intelligent Machine. Effortless Production. Superior Results.
The DGSHAPE DWX-42W enables wet milling of popular glass ceramic and composite resins with high precision and accuracy.- High speed production with proprietary DGSHAPE spindle
- Expanded 6-tool Automatic Tool Changer for uninterrupted milling
- LAN capable for easy connectivity
- Included VPanel for easy monitoring of milling jobs and tools
| The DWX-4W goes beyond dry milling and is the epitome of wet grinding technology. It uses 4-axis simultaneous movements to wet grind precision inlays, onlays, crowns, veneers and short-span bridges from glass ceramic and composite resins. | Because the XIOS Scan imaging plates were developed specifically for the Sirona scanner, they offer particularly high image quality. For better identification and visibility in the mouth, the plates have a white, inactive back and a blue, active side. |
| Content | Maxray Cocoon Portable Handheld X Ray
At less than 5lbs, the Maxray Cocoon is lightweight and ready to move. The camera shape design allows the Maxray Cocoon to be held by either one hand or by a carrying strap. Easily finish an FMX in just a few minutes. The Maxray Cocoon has an easy to use display and control function and even comes equipped with Voice Prompts! The Maxray Cocoon has a Long-Life LI Battery, the best battery technology on the market today, taking over 500 x-ray shots on a single battery charge compared to only 100 with other systems.High Resolution X-RaysThe MaxRay Cocoon produces sharp, high resolution images with a 0.4mm focal point. At 70kV the MaxRay generator produces clear images while reducing patient dose.Features & Benefits- LIGHTWEIGHT– Less then 5lbs.
- SAFE – ZERO leakage design makes Maxray Cocoon safe.
- RECHARGEABLE – One charge….takes hundreds of x-rays.
- ECONOMICAL – One Maxray Cocoon unit does the work of multiple x-rays systems. Improves your workflow in your office, its fast and convenient.
- PRACTICAL – Handheld design allows operator to stay with the patient during procedure…It’s like taking a picture!
- SIMPLE – No big bulky arms, backing plates for walls, special cabinets or costly electrical hookups.
- VERSATILE – The Maxray Cocoon Portable Handheld Unit can go with you anywhere. From one office to another!
Technical Specs : Maxray Cocoon Portable Handheld X Ray- Available Colors: White
- Item Classification: 2, Code: A11080.02 (in Korea)
- Grade: Class Ⅱb (MDD 93/42/EEC as amended by 2007/47/EC)
- Classification: B Type applied part
- Tube Voltage: 70kV(fixed)
- Tube Current: 1.7mA (fixed)
- X-Ray Tube Focal Size: 0.4mm
- Cooling system: Oil cooling
- Total filtration: 2.3 mm Al
- Inherent filtration: 0.8mm, fixed added filter :0.7 mm Aluminum)
- Target angle: 19 ~ 20°
- Time Set-up function: 0.05 ~ 1.35 sec (Film/Digital included)
- Distance to target: >20cm
- X-ray field: 50 ㎜ (round-style)
- Size of main body: 139(W) x 163.5(H) x 66.5mm(D)
- Weight of body: 4.8lbs
- LIGHTWEIGHT– Less then 5lbs.
- SAFE – ZERO leakage design makes MaxRay Cocoon safe.
- RECHARGEABLE – One charge….takes hundreds of x-rays.
- ECONOMICAL – One MaxRay Cocoon unit does the work of multiple x-rays systems. Improves your workflow in your office, its fast and convenient.
- PRACTICAL – Handheld design allows operator to stay with the patient during procedure…It’s like taking a picture!
- SIMPLE – No big bulky arms, backing plates for walls, special cabinets or costly electrical hookups.
- VERSATILE – The MaxRay Cocoon Portable Handheld Unit can go with you anywhere. From one office to another!
- 2 – Year Mfg Warranty
| DENTSPLY SIRONA CEREC PRIMEMILLSpeedEngineered for speed and precision, the new CEREC Primemill inherits the proven strength of its predecessor and raises its powerful performance to entirely new heights.You can now mill zirconia restorations in Super Fast milling mode in around 5 minutes, cutting processing times by more than half. The improved grinding mode for high quality glass ceramics also grinds the material faster than ever before. The result? Satisfied patients and high productivity.QualityDENTSPLY SIRONA CEREC PRIMEMILL A combination of new electronics, software, motors and mechanical components contributes to finer resolution and enhanced dynamics. This results in outstanding restoration margins and surface details – for extremely precise results.The new highly accurate 0.5 mm milling tool reliably delivers first class clinical results. Switch to Extra Fine milling mode for a higher level of detail with occlusal fissures and interdental areas on bridges.VersatilityDENTSPLY SIRONA CEREC PRIMEMILL Welcome to a world where you‘re spoiled for choice! The new CEREC Primemill combines wet and dry milling and wet grinding. No matter the indication, with CEREC Primemill you can select from a broad range of material options from validated partners providing the flexibility and predictability you need to offer patients the best possible treatment.Choose from the full spectrum of machining options, including dry and wet milled zirconia, or wet grinding of glass and hybrid ceramics.ConvenienceDENTSPLY SIRONA CEREC PRIMEMILL The new 7” touch interface with user guidance guides operators step-by-step through the workflow, key maintenance procedures and other routine tasks, so you can delegate milling with complete peace-of-mind. The integrated block scanner is a time-saving new feature that automatically scans material blocks with compatible data matrix codes and records the information, including type, size, color and zirconia enlargement factor. All CEREC Primemill tools are fitted with a color-coded RFID chip that is read by the RFID tool reader, feeding into the tool status display, alerting the user if a tool needs replacing. This ensures all tools are performing at optimal levels. A LED light strip indicates unit status and milling and grinding progress.The all-new CERECThe latest generation of our CEREC system sets new standards so you can offer your patients an unmatched combination of single-visit dentistry and excellent quality.A unique solutionThe CEREC system comprises world-class components that interact perfectly ensuring seamless workflows. With CEREC Primescan, CEREC Software 5 and CEREC Primemill, digital chairside dentistry is faster, easier and more reliable than ever before.Outstanding resultsAfter 35 years of continuous optimization, CEREC gives you the options you need to treat multiple indications with the confidence that comes from outstanding results.
Designed to stand out – and fit inThe new CEREC Primemill does not just communicate seamlessly with other CEREC devices, but its sleek design is also the perfect match – and the ideal look for a progressive dental practice. | Ivoclar Vivadent Programat EP 3010Programat EP 3010The Programat EP 3010 is characterized by cost effectiveness and high-quality press and firing results. In addition, the Programat EP 3010 is optimally coordinated with Ivoclar Vivadent press ceramic materials such as IPS e.max Press.In comparison to its predecessor model EP 3000, the operation of the Programat EP 3010 has become even simpler due to the new colour touch display, the modern icons, the intuitive menu-based navigation and the proven membrane-sealed keypad.The new QTK2 heating muffle in combination with the SiC bottom reflector ensures homogeneous heat distribution in the firing chamber. As a result, the investment ring is preheated more evenly and reliably. Furthermore, these features enable the user to press difficult-to-press objects, e.g. with very thin marginal areas, and to achieve even higher quality results.The electronic press drive with force sensor ensures the precise control of the press plunger in the micrometre range. The integrated Crack Detection System (CDS) immediately interrupts the press process if a crack in the investment ring occurs. Therefore, restorations are optimally protected. Advantages:- Programs are optimally coordinated with Ivoclar Vivadent materials.
- QTK2 muffle technology with SiC bottom reflector for homogeneous heat distribution.
- Colour touch screen and proven membrane-sealed keypad for easy operation.
- Electronic press drive with force sensor produces high-quality press results. No compressed air connection required.
- Crack Detection System detects cracks in the investment ring.
- Easy and automatic temperature calibration at two reference points (ATK2).
- Simple software update via USB flash drive.
- Remote diagnosis function via data file for optimum support by a service centre.
- Broad range of programs: 300 individual firing and 20 individual press programs.
- Power Saving Technology for power-saving operation.
| Roland DWX-42W Wet Dental Milling Machine
The DWX-42W enables wet milling of popular glass-ceramic composite resins with high precision and accuracy. High-Speed Production with proprietary DGSHAPE spindle. Expanded 6-tool Automatic Tool Changer for uninterrupted milling. LAN capable for network and hardware connection and communication. VPanel user interface for easy monitoring of milling jobs and tools.The DGSHAPE DWX-42W enables wet milling of popular glass ceramic and composite resins with high precision and accuracy.- High speed production with proprietary DGSHAPE spindle
- Expanded 6-tool Automatic Tool Changer for uninterrupted milling
- LAN capable for easy connectivity
- Included VPanel for easy monitoring of milling jobs and tools
DWX-42W Roland DWX-42W Wet Dental Milling Machine| Millable material | Glass ceramics, Composite resin, PMMA | | Loadable workpiece shape | Width | Maximum 40 mm | | Depth | Maximum 20 mm | | Height | Maximum 20 mm | | Operating speed | 0.24 to 70.9 in./min. (6 to 1,800 mm/min.) | | Spindle speed | 15,000 to 60,000 rpm | | Rotary axis travel angle | A axis | ±360° | | Number of burs housed | 6 | | Attachable bur | Shank diameter | 3 mm, dedicated milling bur | | Compatible compressed air | Control Pressure | 0.3 MPA or more | | Air Capacity | 39 L/min or more | | Interface | USB, Ethernet (10 BASE-T/100 BASE-TX automatic switching) | | Control command set | RML-1, NC code | | Power requirements | AC 100 to 240 V ± 10%, 50/60 Hz (overvoltage category II, IEC 60664-1), 2.1 A | | Power consumption | Approximately 190 W | | Operating noise | During operation | 70 dB(A) or less (when not cutting) | | During standby | 48 dB(A) or less | | External dimensions | Width x Depth x Height | 19.0 x 22.0 x 23.6 in. (482 x 560 x 600 mm) | | Weight | 135 lbs. (61 kg) | | Installation environment | Indoor use, Altitude | Up to 6,562 ft. (2,000m) | | Temperature | 41 to 82 °F (5 to 28°C) | | Humidity | 35 to 80%RH (no condensation) | | Ambient pollution degree | 2 (as specified by IEC 60664-1) | | Short-term temporary overvoltage | 1,440 V | | Long-term temporary overvoltage | 490 V | | Included items | Power cord, USB cable, Roland DG Software Package CD, setup guide, drain hoses, dedicated milling burs (4), detection pin, dummy pin, rotary axis correction jig, ATC magazine correction jig and screw, hexagonal screwdriver, hexagonal wrench, measuring cup, mounting screws (4), milling bur removal jig, coolant tank, waste receptacle, filters (2), regulator with stay and screws (2), maintenance kit, daily maintenance card, 6 mm air hose, coolant additive, MillBox CAM software, Ethernet cable |
| Roland DWX-4W Dental Milling Unit
Reliable High PerformanceIn addition to milling on X, Y and Z axes, the DWX-4W rotates pin-type blocks 360 degrees on a fourth axis (A axis) to support undercuts. The ball screw-driven 4-axis control allows for smooth, high-precision machining. The DWX-4W’s high-performance 60,000-RPM Jaeger spindle is known for its reliability and supports precision milling of glass ceramics and composite resin. With its multi-pin clamp, the DWX-4W is a wet dental milling machine that can mill up to three different pin-type materials continuously in one operation. As a result, prosthetics for up to three different patients can be produced in a single production run, saving time, labour and costs.- Simultaneous 4-axis machining
- 4-state Automatic Tool Changer (ATC)
- 60,000 RPM Jaeger DentaDrive Spindle
- CAM software bundled
- Virtual Machine Panel (VPanel)
- Fully-integrated water and coolant filtration system
- Coolant leakage & flow monitoring sensors
- Tool life monitoring
- Mail notification system
Summary Roland DWX-4W Dental Milling Unit• Maximum Convenience
• Virtual Machine Panel
• Progress and Error Alerts for Error-Free Milling
• Coolant Compartment and Water Filtration
• Clean Cutting Area for Precision Milling
• Economical Open Architecture
• CAM Software Included
• Growth Potential
• Peace of MindThe DWX-4W’s high-performance 60 000 RPM Jaeger DentaDrive spindle supports precision milling. It’s equipped to mil pin-type blocks, including glass ceramics and composite resin – acclaimed in the industry for their superior strength and aesthetics. materials can be finished with a short finishing tome, dramatically reducing labour and production time.In addition to milling on X, Y and Z axes, the DWX-4W rotates pin-type blocks 360 degrees on a fourth axis (A axis) to support undercuts, the rigid ball screw-driven 4-axis control allows for smooth, high-precision machining. With its multi-pin clamp, it can mil up to three different pin-type materials continuously, enabling production three different patient prosthetics in a single production run. it also features an Automatic Tool Changer (ATC) that auto-changes grinding burs without interrupting the production process. | XIOS scan Sirona
XIOS Scan. Small change. Big impact.
The XIOS scan provides a gentle, easy introduction into the world of digital X-ray imaging. If you want to switch from film to digital without having to give up your tried-and-true working methods, imaging plate technology offers you a myriad of possibilities. You can experience many of the advantages of digital imaging without a darkroom and chemicals while your team continues its regular workflow. XIOS Scan completes the family of intraoral X-ray systems from Sirona which includes the sensors XIOS XG and the intraoral X-ray HELIODENTPLUS source.
Tried-and-true workflow meet the advantages of digital imaging
Outstanding scan quality with 22 line pairs/mm
Scratch-free scanning and automatic film detection
Proven Sirona quality “Made in Germany”Technical data
XIOS Scan
Dimensions (H x W x D) 363 mm x 163 mm x 286 mm
Weight 7.3 kg ± 0.5 kg
Pixel size selectable 23/30 μm
Resolution 22/17 Lp/mm
Interface LAN
Dimensions
Storage plate intraoral
Size 0 31 mm x 22 mm
Size 1 24 mm x 40 mm
Size 2 31 mm x 41 mm
Size 3 27 mm x 54 mmSmall Change. Big Impact.Xios Scan provides a gentle, easy introduction into the world of digital X-ray imaging. If you want to switch from film to digital without having to give up your tried-and-true working methods, imaging plate technology offers you a myriad of possibilities. You can experience many of the advantages of digital imaging without a darkroom and chemicals while your team continues its regular workflow.The Xios Scan integrates seamlessly with the Dentsply Sirona X-ray units and software to deliver better, safer and faster intraoral diagnostics.For the best digital image quality and the easiest workflowXios Scan works at an outstanding resolution of up to 22 line pairs/mm (theoretical resolution). The result is exceptionally sharp and detailed images - ideal conditions for an accurate diagnosis. The images are transmitted directly to Sidexis 4, Dentsply Sirona Imaging's software, where they can then be further evaluated and diagnosed. The software provides simple controls for later editing of the visual impression of the X-ray in terms of sharpness, brightness and contrast. |
Reviews
There are no reviews yet.