Air Cooling Mode Provides Improved Patient Safety and Comfort
Patented PISA Technology for the Best Treatment Outcomes
Reduction of thigh and arm circumference
Reduction of flanks
Pain relief in patients with knee osteoarthritis
The easy and comfortable way to reduce adipocytes through non-contact apoptosis-inducing radiofrequency. Utilising a specialised frequency combined with the ideal 300 Watts of power to selectively target and heat adipocytes to the optimal temperature to cause denaturation of cells.
Provide care for patients with a device that is not only easy for you to operate and is relaxing for them. The easy to use touch screen interface combined with the ergonomic articulating arm has multiple joints that provide extended reach and the air flow head conforms to most body types.
HOW IT WORKS FOR REDUCTION FOR WAIST CIRCUMFERENCE
The apoptosis-inducing radiofrequency penetrates deep into the tissue, targeting the adipocytes. The adipocytes are super excited and oscillate rapidly causing frictional heat. The frictional heat raises the adipocyte temperature to 45 degrees at which point the cells denaturise. This denaturation causes changes in the integrity of the adipocyte membrane, which leads to apoptosis (cell death), with expulsion of the intracellular lipid. The body’s natural removal process then takes over, permanently removing the damaged cells.
WHAT SETS enCurve APART?
Destroys fat cells while protecting epidermis and dermis
Two applicators for variety of treatment options including abdomen, thigh and arm
Customise treatments with Personalised Impedance Synchronisation Application technology (PISA)
Safely leave patient unattended during most of the treatment minimises staff time
Easy to install and operate
No consumables
300 Watts deliver ideal power for optimal treatment outcomes
Air Mode works to eliminate sweat on tissue to prevent risk of burn
The enCurve synchronises treatment energy with the change in the patient’s impedance in order to minimise energy loss and achieve a better clinical outcome. PISA technology overcomes shortcomings of traditional RF device.
COMPARISON OF TREATMENT MODALITIES IN BODY CONTOURING
The enCurve easily treats the entire abdomen and waist line for a more natural appearance and provides full coverage, while most competitors do not.
Reviews (0)
Reviews
There are no reviews yet.
Be the first to review “Lutronic enCurve – Non-Contact RF Fat Reduction For Sale” Cancel reply
The Easy, Comfortable Way To Deliver Circumferential Reduction
Creating Great Curves
Perfect Frequency to Destroy Adipocyte Cells
Air Cooling Mode Provides Improved Patient Safety and Comfort
Patented PISA Technology for the Best Treatment Outcomes
Reduction of thigh and arm circumference
Reduction of flanks
Pain relief in patients with knee osteoarthritis
InMode Aesthetics InmodeRF BodyTite with BodyTite and FaceTite ApplicatorsBenefits
Controls heating to ensure that large volume contraction is consistent, avoiding overtreated or undertreated area
When treating different areas of the body, the operator is always receiving real time temperature monitoring, even in deep fat areas where laser temperature readers cannot reach
Allows focal treatment of all body areas with large volume
Treats deep fat, up to 50 mm (2 inches)
Fotona XP Specto, Nd:YAG laser systemFotona’s new XP Spectro laser generator is the one of the latest models of Fotona to hit the market combining the industry recognised gold standard, long=pulse and quasi-continuous wave in a single multi-application laser generator. This combination of technology allows the client to integrate non-ablative aesthetics with surgical techniques.
The new highly accurate 0.5 mm milling tool reliably delivers first class clinical results. Switch to Extra Fine milling mode for a higher level of detail with occlusal fissures and interdental areas on bridges.
Air Cooling Mode Provides Improved Patient Safety and Comfort
Patented PISA Technology for the Best Treatment Outcomes
Reduction of thigh and arm circumference
Reduction of flanks
Pain relief in patients with knee osteoarthritis
The easy and comfortable way to reduce adipocytes through non-contact apoptosis-inducing radiofrequency. Utilising a specialised frequency combined with the ideal 300 Watts of power to selectively target and heat adipocytes to the optimal temperature to cause denaturation of cells.
Provide care for patients with a device that is not only easy for you to operate and is relaxing for them. The easy to use touch screen interface combined with the ergonomic articulating arm has multiple joints that provide extended reach and the air flow head conforms to most body types.
HOW IT WORKS FOR REDUCTION FOR WAIST CIRCUMFERENCE
The apoptosis-inducing radiofrequency penetrates deep into the tissue, targeting the adipocytes. The adipocytes are super excited and oscillate rapidly causing frictional heat. The frictional heat raises the adipocyte temperature to 45 degrees at which point the cells denaturise. This denaturation causes changes in the integrity of the adipocyte membrane, which leads to apoptosis (cell death), with expulsion of the intracellular lipid. The body’s natural removal process then takes over, permanently removing the damaged cells.
WHAT SETS enCurve APART?
Destroys fat cells while protecting epidermis and dermis
Two applicators for variety of treatment options including abdomen, thigh and arm
Customise treatments with Personalised Impedance Synchronisation Application technology (PISA)
Safely leave patient unattended during most of the treatment minimises staff time
Easy to install and operate
No consumables
300 Watts deliver ideal power for optimal treatment outcomes
Air Mode works to eliminate sweat on tissue to prevent risk of burn
The enCurve synchronises treatment energy with the change in the patient’s impedance in order to minimise energy loss and achieve a better clinical outcome. PISA technology overcomes shortcomings of traditional RF device.
COMPARISON OF TREATMENT MODALITIES IN BODY CONTOURING
The enCurve easily treats the entire abdomen and waist line for a more natural appearance and provides full coverage, while most competitors do not.
INMODE Bodytite Laser – Radio Frequency (RF)BodyTite
Cannula Length:17 cm
Cannula Diameter:2.2 mm
Depth of Treatment:Up to 50 mm (2)
Internal Temperature:Operator adjustable between 50°C – 70°C
External Temperature:Operator adjustable up to 42°C
Output Temperature:1 MHz+
FaceTite
Cannula Length:10 cm
Cannula Diameter:1.3 mm
Depth of Treatment:Up to 25 mm (1″)
Internal Temperature:Operator adjustable between 50°C 70°C
External Temperature:Operator adjustable up to 42°C
Output Frequency:1 MHzBodyTite WorkstationMinimally Invasive Radio-Frequency Assisted Lipolysis (RFAL) Surgical Results Without the Scars.BodyTite is InModes latest minimally-invasive body contouring procedure that provides superior internal and external lipolysis, delivering results only achieved through more extensive excisional surgical procedures. BodyTite is powered by RFAL (Radio-Frequency Assisted Lipolysis) resulting in three-dimensional remodeling.BodyTite provides doctors with a tool to perform arm lifts without excisions, breast lifts without the lollipop scar and contour areas of non-adherence with results previously only achieved through more extensive surgical procedures.Benefits
Controls heating to ensure that large volume contraction is consistent, avoiding overtreated or undertreated area
When treating different areas of the body, the operator is always receiving real time temperature monitoring, even in deep fat areas where laser temperature readers cannot reach
Allows focal treatment of all body areas with large volume
Treats deep fat, up to 50 mm (2 inches)PATIENT BENEFITS
Patients today want to avoid surgery when possible. With BodyTite and FaceTite, your patients can reduce fat without leaving behind saggy, wrinkly skin. They are left with surgical-like results with no scars, less downtime and long-lasting, beautiful results.PRACTICE BENEFITS
Adopting RFAL with three-dimensional skin contraction can help innovate your practice. Leveraging BodyTite and FaceTite for your practice allows you to add a suite of minimally invasive procedures that contours and lifts abdominal, breast, face, neck, arm, thigh and knee tissue.FaceTiteHOW DOES IT WORK
FaceTite is a minimally-invasive contouring solution for the face and small areas of the body. Physicians can achieve results similar to a facelift or brachioplasty without excisional surgery. This is a safe, effective and exciting treatment that offers patients significant aesthetic changes.FaceTite is powered by RFAL (Radio-Frequency Assisted Lipolysis) and provides superior internal and external lipolysis, resulting in three-dimensional remodeling of the fibrous septa. Built-in safeguards including real time measurements of skin temperature, impedance monitoring, power cut-off and audible feedback help ensure patient safetyBenefits INMODE Bodytite Laser – Radio Frequency (RF)
Uniform thermal field provides an even distribution of heat.
Dual temperature technologies provide greater safety and control compared to other technologies.
100% energy concentration in the treatment zone.
Physician sets and controls the temperatures. Heat gradient enables optimal treatment results.AccuTite
ACCURACY IS EVERYTHING
PRECISION TARGETING AND PROVEN PERFORMANCE
ACCURACY IS EVERYTHING
The new AccuTite makes focal RF contraction without excisional surgery the new standard in cosmetic medicine. Small, but mighty, the AccuTite delivers precision heating in addition to the science and safety recognized with the Radio-Frequency Assisted Lipolysis (RFAL) family of technologies.
FOR FACE AND BODY
FACEBrow
Periorbital
Nasolabial Fold
Lower Face
Neck
BODYAxilla Bra Fat
Upper Arms
Hands
Abdomen Etching
Inner Thigh
Knees
Womens Health & WellnessSIMPLE, SAFE & FOCUSED
The AccuTite is the smallest minimally-invasive radio-frequency contraction device with the most number of clinical studies and peer-reviewed publications backing its safety and efficacy. Patients who need precision fat reduction or skin contraction now have a new solution that can be done under local anesthesia, in an office setting, in less than 20 minutes, without excisional surgery.
Fotona XP Spectro Laser Generator
The Fotona XP Spectro laser offers an industry leading number of treatments from its advanced platform. The Fotona XP Spectro is an ideal choice for new clinics and clinics wishing to advance to a Fotona laser system from their current equipment.Not looking for a new Laser? See our Used-Laser Sales DirectoryThe Fotona XP Spectro laser offers high quality, fast, efficient treatments in the fields of aesthetics and surgery without compromising efficacy.The Fotona XP Spectro laser system has a 35 watt Nd:YAG engine offering different pulse configurations to be able to offer a wide range of applications at no extra cost and no need for additional hand pieces of software.Non-ablative Nd:YAG lasers are a extremely popular choice of laser in an extremely lucrative marketplace. Nd:YAG is proven as a gold standard in hair removal, skin rejuvenation, vascular treatments and much more. Fotona Xp Spectro Nd:YAG laser emits laser energy at 106nm which is proven to minimize discomfort while showing exceptional efficiently and long term resultsFeatures:Fotona XP Spectro Laser Generator
* Highest Performance
* Gold standard ND:YAG lasers
* Optional QCW Nd:YG laser
* Multiple applications
* Advanced scanner for greater Precision, Speed and Efficacy
* FRAC3 modality
* User friendly
* Massive earning potential
* Ability to treat all skin types safely and effectivelyKey Treatments:
* Laser Hair removal
* Rosacea treatments
* Fine wines and Wrinkles
* Laser peels
* Acne treatments
* Laser assisted lipolysis
* Laser assisted Hyperhidrosis
* Onychomycosis
* Skin tightening, tonng and texturing
* Endovenous laser
* Vascular legions
* Thread veins
* FRAC3
* Pigmentation
* VerrucaeTechnical Data:
* Laser wavelength:1064 nm
* Max. average power:35 W
* Pulsewidth range:PULSE: 0.1 to 50 ms, QCW: 0.1 to 2 ms
* Max. frequency:PULSE: 75 Hz, QCW*: 100 Hz
* Manual spotsizes:2 to 10 mm
* Scanner spotsizes:3 mm*, 6 mm, 9 mm*
* Scanner area:42 cm²
* Beam delivery type:Optical fiberComes with:
* 5 Years Full Parts and Labour Warranty
* 3 pairs of laser safety goggles
* Standard Nd:YAG hanpiece (R33)
* Training and ongoing support
* Competative rates for clinic consumables
DENTSPLY SIRONA CEREC PRIMEMILLSpeedEngineered for speed and precision, the new CEREC Primemill inherits the proven strength of its predecessor and raises its powerful performance to entirely new heights.You can now mill zirconia restorations in Super Fast milling mode in around 5 minutes, cutting processing times by more than half. The improved grinding mode for high quality glass ceramics also grinds the material faster than ever before. The result? Satisfied patients and high productivity.QualityDENTSPLY SIRONA CEREC PRIMEMILL A combination of new electronics, software, motors and mechanical components contributes to finer resolution and enhanced dynamics. This results in outstanding restoration margins and surface details – for extremely precise results.The new highly accurate 0.5 mm milling tool reliably delivers first class clinical results. Switch to Extra Fine milling mode for a higher level of detail with occlusal fissures and interdental areas on bridges.VersatilityDENTSPLY SIRONA CEREC PRIMEMILL Welcome to a world where you‘re spoiled for choice! The new CEREC Primemill combines wet and dry milling and wet grinding. No matter the indication, with CEREC Primemill you can select from a broad range of material options from validated partners providing the flexibility and predictability you need to offer patients the best possible treatment.Choose from the full spectrum of machining options, including dry and wet milled zirconia, or wet grinding of glass and hybrid ceramics.ConvenienceDENTSPLY SIRONA CEREC PRIMEMILL The new 7” touch interface with user guidance guides operators step-by-step through the workflow, key maintenance procedures and other routine tasks, so you can delegate milling with complete peace-of-mind. The integrated block scanner is a time-saving new feature that automatically scans material blocks with compatible data matrix codes and records the information, including type, size, color and zirconia enlargement factor. All CEREC Primemill tools are fitted with a color-coded RFID chip that is read by the RFID tool reader, feeding into the tool status display, alerting the user if a tool needs replacing. This ensures all tools are performing at optimal levels. A LED light strip indicates unit status and milling and grinding progress.The all-new CERECThe latest generation of our CEREC system sets new standards so you can offer your patients an unmatched combination of single-visit dentistry and excellent quality.A unique solutionThe CEREC system comprises world-class components that interact perfectly ensuring seamless workflows. With CEREC Primescan, CEREC Software 5 and CEREC Primemill, digital chairside dentistry is faster, easier and more reliable than ever before.Outstanding resultsAfter 35 years of continuous optimization, CEREC gives you the options you need to treat multiple indications with the confidence that comes from outstanding results.
Designed to stand out – and fit inThe new CEREC Primemill does not just communicate seamlessly with other CEREC devices, but its sleek design is also the perfect match – and the ideal look for a progressive dental practice.
Fotona SP Spectro Laser System
Fotona’s new SP Spectro laser generator is the laser a multi-application laser for every budget. The powerful and easy to use Fotona SP Spectro draws together two of the gold standard lasers for the cosmetic and aesthetic market high performance Er:YAG and Nd:YAG in one unique and affordable package. The Fotona XP Spectro is the laser system of choice to provide multi applications without the capital cost of multiple laser systems.Features:
Highest Performance
Gold standard Er:YAG laser and ND:YAG lasers
Complete package Anti-Aging treatments
Massive potential with multiple applications
Full field and fractional scanning
New Novel Turbo technology
New V-smooth technology
User friendly
Great return on investment
An Affordable multi-application platformThe Fotona SP Spectro offers you the client with the most dependable, affordable up to date most complete package for aesthetical and surgical treatments. It has exceptional functionality and performance despite its relatively low price tag. The Fotona SP Spectro has enhanced treatments attributes coupled with fully customizable settings offering 3rd generation Er:YAG skin resurfacing. The Fotona SP Spectro can be customised and used on any skin type for both full field and fractional resurfacing by absolute control over ablation and coagulation. The Fotona SP Spectro comes complete with state-of-the-art scanners and fractional options which make the system fully loaded and a comprehensives solution to any laser practice whether new or old. Fotona’s unique TURBO technology offers high-definition fractional treatments and Fotona’s V-smooth technology offers a high-speed, minimally –ablative coagulation which further adds to the Spectro’s treatment dimensions. Using the Spectro wide functionality makes you the practitioner an artiste to be able to mix and match cold ablation and thermal effects to achieve the very best of results.The ideal tool for Non-ablative treatmentsThe mainstay for many aesthetic and cosmetic practices is still non-ablative treatments and for this the ND:YAG application of the Fotona SP Spectro is invaluable and needs no introduction as the gold standard treatment. The new SP Spectro also features as standard the innovative and acclaimed S-11, 42cm2 area scanner and support top-hat distribution hand pieces for impressive results in laser hair removal, acne, vascular treatments and of course skin rejuvenation. Also as standard for the more challenging skin types and structures is Fotona’s own FRAC3 modality. This is a fractional approach that supplies non-ablative effects in the skin with minimal damage to the surrounding skin and tissue which results in superior treatments and quicker recovery time.Anti-aging platformThe Fotona SP Spectro also has option for QCW Nd:YAG which will allow you to combine both ablative and non-ablative techniques with lucrative surgical treatments to maximise the return on your investment. The minimally invasive treatments such as laser assisted lipolysis, laser assisted hyperhidrosis and endovenous laser ablation can become a valuable part of your treatment portfolio with this unique laser system and in essence offer a complete anti-aging make over, from the inside out.Er:YAG and Nd:YAG; what a combination!Er:YAG energy is highly absorbed in water which is the main target chromophore for skin rejuvenation and leads to micro-level precision for skin vaporization making the SP Spectro very efficient with little thermal conduction. The results of this advanced performance is side effects are kept to a minimum with little hyperpigmentation or erythema and a fast recovery time. Variable square pulse technology can be maximised with the SP Spectro as it can be accurately tuned to vary the ratio of cold ablation and non-ablative thermal effects to best suit the needs of the patient.The ND:YAG complements the Er:YAG lasers ablative action with the ability to penetrate deeper into the skin without risking damage to the skin surface. The homogenous absorption in skin allows the functionality to be used on all skin types. . The SP Spectro’s Nd:YAG variable square pulse technology causes an increase in the target areas temperature whilst having little or no effect on the surrounding tissue.Maximising potential
The Fotona SP Spectro has inbuilt systems in place to make it one of the best value for money laser systems currently on offer with:
VSP technology – A square pulse eliminating needless energy to the skin
EFC – Energy feedback control – Checking and controlling each pulse of laser energy, ensuring the output is exactly matched for a safe and effective treatment avoiding uncontrolled energy fluctuations
Turbo Technology – A rapid sequence of identical pulses at the same spot, enhancing ablation depth whilst creating more sharply defined, high definition micro channels maximising the effects of even the most conservative Er:YAG treatment settings
V Smooth Technology – High coagulation, minimally ablation technology. A computer controlled setting that irradiates individual spots for an optimum time before retreating at optimum interval levels
F Runner ER:YAG Scanner – A computer controlled scanner that delivers sharp fractional treatments with absolute precision and accuracy
S-11 Scanner – a 42cm2 scan area with an integrated cooling attachment to ensure large area treatments with maximum patient and practitioner comfort
S Runner Er:YAg Scanner – 4mm spot size and 16cm2 area of treatment for full field resurfacing with adjustable scan areas and patterns
Tissue Effect indicator – This shows the balance between ablative and coagulation allowing you to estimate the nature of the treatment and predict the outcome of the treatment.
Active Optical Systems Optima 518 IPL LaserHandpiece (Standard):Multipurpose Wavelength Mark-II
Handpiece (Optional):Facial Treatments
Pulse Interval/Repetition Rate:0.5 – 2 Seconds
Maximum Output Treatment Pattern:22 Joule /cm 2
Output Power:11-31 Joule / cm 2 , up to 4000 W
Cooling System:Improved Air Cooling
Control:Advanced Software Interface
Lamp’s Life Span:200,000 Flashes (minimum)
Treatment Area/Spot Size:15 x 50 mm, (7.5 cm 2)
Wavelength:420 – 1,100 nm
Weight:88.18 lbs (40Kg) (including stand)
Dimensions:17.32 inches x 17.72 inches x 39.37 inches (44cm x 45cm x 100cm)
Mains:220-230 VAC, 50/60 Hz; 100-120 VAC, 50/60 Hz
Max Mains Power:600 VA
Treatments Variety:
Skin Rejuvenation
Pigmentation Treatment
Acne Treatment
Hair Removal
Hair Removal – Deep Follicles
Hair Removal – Sensitive Skin
Vascular (Facial) Treatment
Tattoo Removal
ACTIVE OPTICAL SYSTEMS OPTIMA 518 IPL LASERr uses 12 preset programs. The programs are set in a consecutive, energy intensity increasing order, as specified by the tables of settings, covering all types of hair and skin combinations to be treated.
12 Programs
1 – Very Dark Skin, Fitzpatrick Skin Type IV
2 – Dark Skin, Fitzpatrick Skin Type IV
3 – Dark Skin, Fitzpatrick Skin Type III
4 – Dark Skin, Fitzpatrick Skin Type III
5 – Medium Skin, Fitzpatrick Skin Type II
6 – Medium Skin, Fitzpatrick Skin Type II
7 – Light Skin, Fitzpatrick Skin Type II
8 – Light Skin, Fitzpatrick Skin Type I
9 – Very Light Skin, Fitzpatrick Skin Type I
10 – Very Light Skin, Fitzpatrick Skin Type I
11 – Very Light Skin, Fitzpatrick Skin Type I
12 – High Power, Fitzpatrick Skin Type IActive Optical Systems Optima 518 IPL LaserOptima-518-Classic
The Optima – 518 Classic was designed to answer the needs of sophisticated practitioners who want to provide state of the art treatment to their patients on one hand, based on proven and tested treatment protocols and on the other hand to have the ability to reach new and improved protocols by conducting innovative clinical investigations.The Optima – 518 Classic, based on active’s GEM-PL technology, sets the pulse pattern according to the selected treatment type, skin color, skin photosensitivity and treatment depth. The treatment protocols and different pulse patterns take into account the tissue’s TRT (Thermal Relaxation Time) and the combined knowledge accumulated from thousands of treatments done during the years and clinical investigations done to confirm the findings.ACTIVE OPTICAL SYSTEMS OPTIMA 518 IPL LASERNew Handpiece Design The Optima – 518 Classic is the first model to use the new Mark II which enables a multipurpose handpiece:
* Faster treatments – up to 0.5 Seconds Between pulses.
* Real-time handpiece temperature control.
* Contemporary and stylish design.
* Light weight design – 25% less weight to improve the therapists’ comfort.Research program for clinical investigations, the self setting program allows researchers to set the treatment’s parameters according to their needs. Allowing advanced research with the device. The energy levels in the self setting program can reach 31J cm 2 with high intensity of 4000 W.ACTIVE OPTICAL SYSTEMS OPTIMA 518 IPL LASER Approvals
* CE MDD Intl. Medical Standard
* FDA U.S. Safety Standard
* ISO-13485 Med. Production STD
* IEC 60-601-1 Medical Safety STD
* CFS Gov. Health Approval
* CSA Can. & U.S. Safety App
* TGA Australian health STD.
Reviews
There are no reviews yet.