PERKASA MEDICAL

Free shipping worldwide. Orders over $200
Availability: In Stock

Ivoclar Programat EP 5010/G2

$4,820.00

Modern. Intuitive. Smart. With the objective to meet the requirements of your dental laboratory. Proven technologies, such as the fully automatic press function (FPF), combined with new features – that is what makes the new Programat press furnace your reliable partner.

Other people want this. 15 people have this in their carts right now.

Description

Ivoclar Programat EP 5010/G2

Modern design
  • Dynamic colour concept
  • Ergonomic shapes and forms
  • Optimized cooling tray for more space and better cooling
High process reliability
  • Fast and high-quality firing results due to infrared technology
  • IoT function for free monthly equipment usage reports
  • Pre-set programs and material groups
Intuitive operation
  • New membrane-sealed keypad with proven colour touchscreen display
  • New user interface featuring new symbols and icons
  • Efficient and reliable performance due to software optimizations

With large colour touch display and membrane keyboard. An integrated infrared thermal imaging camera automatically detects the size of the placed investment ring, checks the temperature and, if necessary, adjusts the pressing process or warns if the investment ring is too cold. If the unit is used as a furnace, the camera automatically controls the closing and pre-drying process. In addition to the Ivoclar Vivadent programs already installed, 500 individual programs are available.

Ivoclar Programat EP 5010/G2 Advantages:
  • Fully automatic pressing function (FPF) for excellent pressing results;
  • Infrared technology (IRT) for more convenience, process reliability and efficiency;
  • Electronic pressing drive with force sensor for precise control of the pressing stamp in the micrometre range, no compressed air connection necessary;
  • Crack Detection System (CDS) immediately interrupts the pressing process if a crack is detected in the investment ring;
  • QTK2 heating muffle with SiC base reflector for homogeneous heat distribution and excellent pressing and firing results;
  • Automatic temperature calibration (ATK2) via two reference points enables highly accurate calibration;
  • Optical Status Display (OSD) provides information about the current operating status by means of different colours;
  • Digital Tooth Shade Assistant (DSA) for determining the correct tooth shade on the basis of three selected reference teeth;
  • Energy-saving technology enables up to 40% power savings in standby mode;
  • Power Power Fail Save System bridges short-term power failures of up to 10 seconds;
  • Integrated maintenance and test programs;
  • Glazing function wizard;
  • Program copy wizard;
  • Multimedia functions;
  • IoT connection;
  • Remote monitoring and diagnosis via Programat app;
  • Software updates via USB stick.
Ivoclar Programat EP 5010/G2 Technical data:
    32.0 x 49.5 x 55.0 cm without tray, 39.5 x 49.5 x 55.0 cm with tray; 200-240 V, 50/60 Hz; power consumption max. 8.5 A; firing temperature max. 1200 °C; firing chamber ø 90 mm, height 80 mm; 3 USB ports; SD card reader; 20.5 kg.
Delivery includes:
    Programat EP 5010 G2 complete with mains cable; vacuum hose; firing tray; SiC firing table; tong holder; investment ring cooling tray, firing tray kit 2; automatic temperature control set ATK2 (test set); WiFi kit; USB download cable; USB stick and various accessories.

 

Reviews

There are no reviews yet.

Be the first to review “Ivoclar Programat EP 5010/G2”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsIvoclar Programat EP 5010/G2 removeDexis Intraoral Digital Dental X-Ray Sensor removeRoland DWX-4 Dental Milling Unit For Sale removeDUERR VISTA SCAN MINI EASY COMPACT & EASY For Sale removeRoland DWX-4W Dental Milling Unit For Sale removeSuniRay 2 Digital Intraoral Sensor Size 1 and Size 2 For Sale remove
NameIvoclar Programat EP 5010/G2 removeDexis Intraoral Digital Dental X-Ray Sensor removeRoland DWX-4 Dental Milling Unit For Sale removeDUERR VISTA SCAN MINI EASY COMPACT & EASY For Sale removeRoland DWX-4W Dental Milling Unit For Sale removeSuniRay 2 Digital Intraoral Sensor Size 1 and Size 2 For Sale remove
Image
SKU
Rating
Price $4,820.00 $2,750.00 $5,200.00 $3,450.00 $6,500.00 $2,800.00
Stock
Availability
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionModern. Intuitive. Smart. With the objective to meet the requirements of your dental laboratory. Proven technologies, such as the fully automatic press function (FPF), combined with new features – that is what makes the new Programat press furnace your reliable partner.Image Quality According to DEXIS, their digital xray system provides detailed image quality and includes image enhancement tools that increase diagnostic capabilities. When the 9 evaluators were asked to rate the system’s image quality and enhancement aids, 89% rated them as excellent to very good. One of the evaluators commented that the system’s “ClearVu and image magnification allow us to diagnose very effectively.”Overall Satisfaction When asked to rate their overall satisfaction with the DEXIS Digital X-ray System, 89% of the evaluators rated it as excellent to very good. Commented one evaluator, “DEXIS has been very responsive to our needs.”The industry’s most cost-effective and user-friendly dental mill, the DWX-4 produces single crowns, copings, bridges and hybrid abutments with precision and ease. The DWX-4 is the ideal device for labs just getting into digital milling or labs that need a second device for urgent jobs. With the DWX-4 dental milling system, you can quickly and economically mill on-demand in a wide variety materials, including the latest hybrid ceramics.Since the introduction of conventional X-ray film development in dental medicine, Durr Dental has been leading the way in diagnostics for dental surgeries. Digital X-ray with Durr Dental offers dentists images with high resolution to meet all diagnostic demands. More than 40 years experience in the development of X-ray technology leads time and again to practice-oriented and innovative solutions. The VistaScan Mini image plate scanner makes image plate diagnostics even faster for dentists.The DWX-4W goes beyond dry milling and is the epitome of wet grinding technology. It uses 4-axis simultaneous movements to wet grind precision inlays, onlays, crowns, veneers and short-span bridges from glass ceramic and composite resins.SuniRay 2 achieves maximal image quality with superior diagnostic capabilities while maintaining the lowest radiation levels among all digital sensors. The comprehensive and feature-rich Prof. Suni Advanced Imaging Software supplements the SuniRay 2’s high-quality imaging with a wide array of user-friendly customization and image-enhancement tools. With the SuniRay 2, Suni has created a complete digital radiography system that seamlessly integrates with your entire practice.
Content

Ivoclar Programat EP 5010/G2

Modern design
  • Dynamic colour concept
  • Ergonomic shapes and forms
  • Optimized cooling tray for more space and better cooling
High process reliability
  • Fast and high-quality firing results due to infrared technology
  • IoT function for free monthly equipment usage reports
  • Pre-set programs and material groups
Intuitive operation
  • New membrane-sealed keypad with proven colour touchscreen display
  • New user interface featuring new symbols and icons
  • Efficient and reliable performance due to software optimizations
With large colour touch display and membrane keyboard. An integrated infrared thermal imaging camera automatically detects the size of the placed investment ring, checks the temperature and, if necessary, adjusts the pressing process or warns if the investment ring is too cold. If the unit is used as a furnace, the camera automatically controls the closing and pre-drying process. In addition to the Ivoclar Vivadent programs already installed, 500 individual programs are available.
Ivoclar Programat EP 5010/G2 Advantages:
  • Fully automatic pressing function (FPF) for excellent pressing results;
  • Infrared technology (IRT) for more convenience, process reliability and efficiency;
  • Electronic pressing drive with force sensor for precise control of the pressing stamp in the micrometre range, no compressed air connection necessary;
  • Crack Detection System (CDS) immediately interrupts the pressing process if a crack is detected in the investment ring;
  • QTK2 heating muffle with SiC base reflector for homogeneous heat distribution and excellent pressing and firing results;
  • Automatic temperature calibration (ATK2) via two reference points enables highly accurate calibration;
  • Optical Status Display (OSD) provides information about the current operating status by means of different colours;
  • Digital Tooth Shade Assistant (DSA) for determining the correct tooth shade on the basis of three selected reference teeth;
  • Energy-saving technology enables up to 40% power savings in standby mode;
  • Power Power Fail Save System bridges short-term power failures of up to 10 seconds;
  • Integrated maintenance and test programs;
  • Glazing function wizard;
  • Program copy wizard;
  • Multimedia functions;
  • IoT connection;
  • Remote monitoring and diagnosis via Programat app;
  • Software updates via USB stick.
Ivoclar Programat EP 5010/G2 Technical data:
    32.0 x 49.5 x 55.0 cm without tray, 39.5 x 49.5 x 55.0 cm with tray; 200-240 V, 50/60 Hz; power consumption max. 8.5 A; firing temperature max. 1200 °C; firing chamber ø 90 mm, height 80 mm; 3 USB ports; SD card reader; 20.5 kg.
Delivery includes:
    Programat EP 5010 G2 complete with mains cable; vacuum hose; firing tray; SiC firing table; tong holder; investment ring cooling tray, firing tray kit 2; automatic temperature control set ATK2 (test set); WiFi kit; USB download cable; USB stick and various accessories.
 

Dexis Intraoral Digital Dental X-Ray Sensor

Product Description

Dexis Intraoral Digital Dental X-Ray SensorSoftware Ease of Use According to the manufacturer, the DEXIS x-ray software was designed to be highly effective throughout diagnosis, treatment planning, and treatment. It is intended to serve as an imaging hub, managing all digital images, including intra- and extraoral radiographs and photographs. The manufacturer states that the images can be quickly organized, stored, retrieved, printed, and shared with patients and colleagues. The 9 dentists who participated in this product evaluation were asked to rate the DEXIS Digital Imaging software on its ease of use with regard to taking and accessing radiographs and for diagnosis, patient education, and communication with colleagues and insurance companies. Six of the evaluators rated the system as excellent and 3 rated it as very good. One evaluator commented that “when communicating with patients, we use DEXIS images displayed on a monitor in front of the patient every day on virtually every patient.”Software Integration The manufacturer claims that the DEXIS imaging software can be easily integrated with all major practice management systems. According to DEXIS, the DEXIS Integrator automatically synchronizes with the patient record.When the evaluators were asked to rate the software integration with practice management software and interface with hardware (eg, cameras, panoramics, and scanners), 78% rated it as excellent to very good, while 22% rated it as good. One of the evaluators said, “The bridge to our practice management systems is seamless. We use [the] DEXIS digital pan[oramic] so that we can store panoramic x-rays easily in the same location as full series. We use an intraoral camera to store preoperative and interoperative photographs for excellent documentation.”Sensor Comfort and Ease of Use According to DEXIS, the heart of their digital system is the PerfectSize sensor. The manufacturer states that their single-size sensor has 3 advantages: 1) because the electronics are on the back of the sensor, the active imaging area is most of the total sensor size; 2) the beveled corners, slim profile, and rounded casing allow for accurate placement and patient comfort; 3) patented cord placement allows the practitioner to take vertical and horizontal bitewings and all periapicals with only 1 universally sized sensor. The evaluators were asked to rate both the ease of use of the sensor and patient comfort. Five evaluators rated ease of use excellent and 4 rated it very good. With regard to patient comfort, 3 evaluators rated the sensor excellent and 6 rated it very good. One evaluator noted that he experienced a few issues when placing the sensor in some children and patients with very small mouths. Another evaluator, however, is very happy with the sensor, saying, “I chose DEXIS to take a full radiographic series on every patient. It was the only direct image system we tested that met that objective.”Image Quality According to DEXIS, their digital xray system provides detailed image quality and includes image enhancement tools that increase diagnostic capabilities. When the 9 evaluators were asked to rate the system’s image quality and enhancement aids, 89% rated them as excellent to very good. One of the evaluators commented that the system’s “ClearVu and image magnification allow us to diagnose very effectively.”Overall Satisfaction When asked to rate their overall satisfaction with the DEXIS Digital X-ray System, 89% of the evaluators rated it as excellent to very good. Commented one evaluator, “DEXIS has been very responsive to our needs.”System Includes* a highend CCD sensor * portable PC card and DEXusb connection options * DEXIS imaging software * a complete set of sensor holders and accessories * on-site training * a printed instruction manual * training tutorials on CD * a quick reference guide for the operatory * 1 year of DEXcare support.

Roland DWX-4 Dental Milling Unit

Digital dental technologies are transforming every aspect of the dental industry, making it easier than ever to produce precise crowns, copings and bridges. The latest technological advancements in scanning, CAD/CAM software and CNC milling allow digital dental labs to deliver custom production with speed and precision and enjoy optimal accuracy and repeatability.The industry’s most user-friendly desktop milling solution, the Roland DWX-4 compact dental mill, is at the forefront of this technological revolution. With the DWX-4, you can mill a single crown or small bridge quickly and economically. Affordably priced, the DWX-4 is ideal for any lab just getting started in digital dentistry or those labs with scanners who no longer wish to outsource production. It’s also the perfect addition to labs that need a second device for urgent jobs. With the DWX-4, these labs can mill a single crown or bridge on demand, without tying up their larger production mills.This affordable, precise 4-axis desktop mill is an ideal choice for labs just getting started in digital dentistry or for those that want to perform smaller, time-urgent jobs (like a single crown or small bridge) without tying up their larger production mills.

Features and Benefits:Roland DWX-4 Dental Milling Unit

  • Compact design is ideally suited for all lab environments
  • 2-station automatic tool changer
  • 4-axis simultaneous lead/worm screw driven machining
  • Tool diagnostics with tool life management
  • Air blower to aid with difficult-to-mill materials
  • Negative ion generator for neutralizing  static electricity
  • Multicast capability for connecting up to four DWX dental mills to one computer
  • Color-coded LED light signals machine status
  • Automatic calibration
  • E-mail notification system
  • Dust collection system with airflow sensor
  • Virtual panel ensures easy operation
  • G-code compatible
  • Compatible with industry-standard software
  • Open architecture for easy integration into a complete production solution
  • CAM software included
The industry’s most cost-effective and user-friendly dental mill, the DWX-4 produces single crowns, copings, bridges and hybrid abutments with precision and ease. The DWX-4 is the ideal device for labs just getting into digital milling or labs that need a second device for urgent jobs. With the DWX-4 dental milling system, you can quickly and economically mill on-demand in a wide variety materials, including the latest hybrid ceramics.

DUERR VISTA SCAN MINI EASY COMPACT & EASYDurr Dental VistaScan Mini Easy image plate scanner makes image plate diagnostics even faster for dentists. The compact device is particularly easy to use and requires a minimum of space so that it can be installed in the treatment room.The advantage: X-ray and scanning directly at the chairside. The reusable VistaScan image plates are read out in top quality within seconds. There has never been a better time to change over to image plates!Features:DUERR VISTA SCAN MINI EASY COMPACT & EASY
  • Top image quality
  • For common image plates sizes (size 0 and size 2)
  • Easy integration via DBSWin imaging software or your own third party software
  • Ideal chairside appliance
  • Interface with PC via USB or network
A new standard for image plate scanners The new compact VistaScan Mini View impresses users with its tried-and-trusted technology and the excellent image quality of the VistaScan family. It also offers numerous functions which noticeably increase comfort, efficiency and safety during everyday work. This gives the surgery team the confidence that they can rely on their equipment.The best possible detection of details – reliable diagnostics The level of detection of details achieved by the VistaScan image plates is superior to that of both X-ray film and other image plate systems. This provides dentists with a sound basis for making reliable diagnoses. The DBSWIN imaging software provides help in this regard and ensures ergonomic work processes. The VistaScan Mini View can even be used with other common software if necessary.The easy way from the film to the image plate Dürr Dental image plate technology ensures an extremely easy switch from X-ray film to a digital workflow. Since the X-ray process and image formats do not differ from those for analogue film, there‘s not really anything new to learn. The thin, flexible plate offers clear advantages for both the surgery team and patients: It is easier to position and sits more comfortably in the patient‘s mouth. Once an image has been taken, it appears on the monitor in just a few seconds. The durable image plate is then immediately ready to be used again.

Roland DWX-4W Dental Milling Unit

Reliable High PerformanceIn addition to milling on X, Y and Z axes, the DWX-4W rotates pin-type blocks 360 degrees on a fourth axis (A axis) to support undercuts. The ball screw-driven 4-axis control allows for smooth, high-precision machining. The DWX-4W’s high-performance 60,000-RPM Jaeger spindle is known for its reliability and supports precision milling of glass ceramics and composite resin. With its multi-pin clamp, the DWX-4W is a wet dental milling machine that can mill up to three different pin-type materials continuously in one operation. As a result, prosthetics for up to three different patients can be produced in a single production run, saving time, labour and costs.

Features and Benefits:

  • Simultaneous 4-axis machining
  • 4-state Automatic Tool Changer (ATC)
  • 60,000 RPM Jaeger DentaDrive Spindle
  • CAM software bundled
  • Virtual Machine Panel (VPanel)
  • Fully-integrated water and coolant filtration system
  • Coolant leakage & flow monitoring sensors
  • Tool life monitoring
  • Mail notification system
Summary Roland DWX-4W Dental Milling Unit
• Maximum Convenience • Virtual Machine Panel • Progress and Error Alerts for Error-Free Milling • Coolant Compartment and Water Filtration • Clean Cutting Area for Precision Milling • Economical Open Architecture • CAM Software Included • Growth Potential • Peace of MindThe DWX-4W’s high-performance 60 000 RPM Jaeger DentaDrive spindle supports precision milling. It’s equipped to mil pin-type blocks, including glass ceramics and composite resin – acclaimed in the industry for their superior strength and aesthetics. materials can be finished with a short finishing tome, dramatically reducing labour and production time.In addition to milling on X, Y and Z axes, the DWX-4W rotates pin-type blocks 360 degrees on a fourth axis (A axis) to support undercuts, the rigid ball screw-driven 4-axis control allows for smooth, high-precision machining. With its multi-pin clamp, it can mil up to three different pin-type materials continuously, enabling production three different patient prosthetics in a single production run. it also features an Automatic Tool Changer (ATC) that auto-changes grinding burs without interrupting the production process.

SuniRay 2 Digital Intraoral Sensor Size 1 and Size 2

X-Ray Imaging Properties
  • Resolution: The pixel resolution of the high resolution (HiRes) sensors exceeds 15 lp/mm. The standard resolution of an X-Ray image, as measured by the modulation transfer function (MTF) exceeds 12 lp/mm. This is measured by using a standard 60 kV intraoral X-ray source.
  • Does Efficiency: The sensor will produce a high quality image with an X-Ray dose that is only a fraction of the standard dose required by Dental X-Ray film.
  • Diagnostic Efficacy: The system will produce a superior image quality of images obtained when using standard dental X-Ray film. This allows the dentist to diagnose standard intraoral pathologies encountered during screening procedures.
  • Wide dynamic range: The sensor pixel well capacity is very high, allowing a higher accommodation of greyscale (bone density) dynamic range.
Sensor Material Biocompatibility SpecificationsThe sensor’s body material and cable material are biocompatible. The sensors and all component materials have been tested to comply with ISO standards, and specifically, the sensor complies with EN IS0-10993 (Biological Evaluation of Medical Devices). 
Technical dataSize 1Size 2
Sensor Dimensions (mm)39.5 x 2643.5 x 31.5
Active Area (mm)31.1 x 20.235.2 x 26.2
Sensor TechnologyCMOS APS Fiber PlateCMOS APS Fiber Plate
Maximum Gray Levels40964096
Sensor Cable3 feet (1m)3 feet (1m)
Cable AttachmentReinforced Strain ReliefReinforced Strain Relief
USB ModuleIntegrated USB 2.0 ModuleIntegrated USB 2.0 Module
SoftwareProf. SuniProf. Suni
X-Ray Imaging Properties SuniRay 2 Digital Intraoral Sensor Size 1 and Size 2
  • Resolution: The pixel resolution of the high resolution (HiRes) sensors exceeds 15 lp/mm. The standard resolution of an X-Ray image, as measured by the modulation transfer function (MTF) exceeds 12 lp/mm. This is measured by using a standard 60 kV intraoral X-ray source.
  • Does Efficiency: The sensor will produce a high quality image with an X-Ray dose that is only a fraction of the standard dose required by Dental X-Ray film.
  • Diagnostic Efficacy: The system will produce a superior image quality of images obtained when using standard dental X-Ray film. This allows the dentist to diagnose standard intraoral pathologies encountered during screening procedures.
  • Wide dynamic range: The sensor pixel well capacity is very high, allowing a higher accommodation of greyscale (bone density) dynamic range.
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
You're viewing: Ivoclar Programat EP 5010/G2 $4,820.00
Add to cart
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
Shopping cart close