| Description | This system allows not only a quantitative nutational infrasonic infiltration, but also a nutational infrasonic liposculpture.Manufactured for a safe liposculpture respecting the non-fatty tissues. | Treatments offered with the InMode OptimasMorpheus8- Skin Resurfacing and RejuvenationLumecca IPL – Age spot and sun spot treatmentForma – Skin remodeling at its bestAvailable Handpieces:
LUMECCA
FORMA
FRACTORA
DIOLAZEXL
VASCULAZE
VLAZE
MORPHEUS8LUMECCA
Fastest IPL Results*
*Clearance in 1-2 sessions, compared to 4-5 sessions with competing devices | Contoura by Inmode Non-invasive body contouring technology proven in peer reviewed and published human studies to both permanently kill adipose tissue and contract the skin. Unlike other body contouring devices (which may carry high per procedure cost) Contoura has zero consumable costs or pulse counters MODEL: InModeRF REF: AG606970A **Excellent Condition** INCLUDES: – MiniFX Handpiece – BodyFX Handpiece – PLUS(Forma) Handpiece – Footswitch – Full Manual and Display info | The new highly accurate 0.5 mm milling tool reliably delivers first class clinical results. Switch to Extra Fine milling mode for a higher level of detail with occlusal fissures and interdental areas on bridges. | InMode Aesthetics InmodeRF BodyTite with BodyTite and FaceTite ApplicatorsBenefits
Controls heating to ensure that large volume contraction is consistent, avoiding overtreated or undertreated area
When treating different areas of the body, the operator is always receiving real time temperature monitoring, even in deep fat areas where laser temperature readers cannot reach
Allows focal treatment of all body areas with large volume
Treats deep fat, up to 50 mm (2 inches) | 3Deep Intensif Handpiece – Fractional Microneedling RF Skin Remodeling
Specifically designed to treat acne scars, deep wrinkles, stretch marks and other conditions requiring deep dermal heating. The Intensif Handpiece applies an array of micro-diameter needles to safely and effectively deliver focused RF energy deep into the dermis, providing a revolutionary collagen remodeling solution for acne scar treatment and deep wrinkle reduction, with minimal discomfort and downtime. |
| Content | Euromi Eva SP7 Lipomatic Liposuction Unit{tab System composition}- 15-inch touch screen that can be angled from 0 to 45 degrees
- Excellent visibility for the surgeon during the procedure
- Control panel with touch screen allowing the infiltrated and aspirated zones to be visualized
- Control of the volume infiltrated and aspirated millimeter per millimeter in the zone selected on the touch screen
- The n.i.l technique ensures an homogeneous infiltration with a constant pressure, whatever the fat density
- Infiltration and aspiration data recording on USB flash memory
- Compatible with the lipofilling material n.l.f System 1 & 2
- In compliance with the European standards – CE marking
{tab Advantages}- Preservation of non-fatty tissues
- Very easy to change zones thanks to the mapping of the different zones on the touch screen
- Shorter post-procedure recovery
- Less traumatising (fewer hematomas and major reduction of ecchymosis and oedemas)
- Less painful for the patient
- Infrasonic frequency (25 Hz) comfortable for the patient
{tab Accessories} Euromi Eva SP7 Lipomatic Liposuction Unit- Evamatic/evamatic
- Control panel with touchscreen
- Quantitative infiltration system
- High-speed aspirator
- Complete set of cannulas
- Accessories
The Eva sp 7 allows a quantitative nutational infrasonic infiltration and also a nutational infrasonic liposculpture.Manufactured for a safe liposculpture respecting the non-fatty tissues, the system is entirely digitalizedIt complies with European standards (CE marking) and is compatible with N.L.F. System, our kit for lipofilling.This product is a medical device intended for use by qualified healthcare professionals.If you are a healthcare professional and would like more information about this product, please complete the form opposite.If you are an individual, for more information, please refer to your healthcare professional.Special features of Eva sp 7:- The screen provides excellent visibility for the surgeon during the procedure: infiltrated and aspirated areas.
- In addition, changing zones is very easy thanks to the mapping of the different zones on the touch screen. This screen allows you to control the volume infiltrated ml / ml in the zone selected on it.
- Infiltration and aspiration data can be saved on a USB drive.
| Inmode Aesthetics Optimas with Lumecca 515 & 580LUMECCA
SR515
Spot size:10x30mm
Pulse Repetition:1pps at all energies
Wavelength:515-1200nm
Fluence:10-30J/cm2
Peak Power:High Peak Power
Pulse Duration:Short/Long
Cooling:Controlled
SR580
Technology:IPL
Spot size:10x30mm
Pulse Repetition:1pps at all energies
Wavelength:580-1200nm
Fluence:10-30J/cm2
Peak Power:High Peak Power
Pulse Duration:Short/Long
Cooling:Controlled
FORMA
RF Output Frequency: Up to 65 W
Output Frequency: 1 MHz
Temperature Cut-Off: Real time temperature measurements set by operator up to 43°C
FRACTORA
24 Pin:Type – Full Thickness Dermal; Configuration – 6×4; Pin Length – 3000u; Ablation Depth – 3 mm; Heating Depth – Between 3-5 mm; Max Output Energy 62 mj/pin; Output Frequency – 1 MHz; Repetition Rate – Up to 2 pps
24 Pin Coated:Type – Deep and Subdermal; Configuration – 6 x 4 Coated; Pin Length – 3000 u, Ablation Depth – 3 plus mm; Heating Depth – Between 3-5 mm; Max Output Energy 62 mj/pin; Output Frequency – 1 MHz; Repetition Rate – Up to 2 pps
60 Pin:Type – Mid Dermal; Configuration – 10×6; Pin Length – 600u; Ablation Depth – 0.6-1 mm; Heating Depth – Between 3-5mm; Max Output Energy 62 mj/pin; Output Frequency – 1 MHz; Repetition Rate – Up to 2 pps
DIOLAZEXL
Laser Wavelength:810 nm (diode)
Spot Size:12mm x 26 mm
Fluence:Up to 40 J/cm2
Pulse Duration:Short/Long
Light Cooling Guide:2-15°C
Repetition Rate:Single and Auto-Repeat
VASCULAZE
Laser Wavelength:1064 nm (diode)
Spot Size:3mm x 4mm
Fluence:40-300 J/cm2
Pulse Duration:5-100 msec
Light Cooling Guide:7-12° C
VLAZE
Laser Wavelength:1064 nm (yag)
Spot Size: 4 mm x 5 mm
Fluence: Up to 300 J/cm2
Pulse Duration: 5 ms 25 ms
MORPHEUS8
Type:Deep and Subdermal
Pin Length:4000
Ablation Depth:5mm +
Max Energy:62 mJ/pin at 75 W
Frequency:1 MHz
Repetition Rate:Up to 2 pps
A FULL BEAUTY SUITE
Optimas will help you optimize results for your patients and your businessProfessional grade aesthetic procedures – Optimas is a great suite of innovations in one workstation to help you achieve your goals. The Optimas full beauty suite has state-of-the-art light, laser, and radiofrequency devices for skin care and hair removal.Available Handpieces : Inmode Aesthetics Optimas with Lumecca 515 & 580
LUMECCA
FORMA
FRACTORA
DIOLAZEXL
VASCULAZE
VLAZE
MORPHEUS8LUMECCA
Fastest IPL Results*
*Clearance in 1-2 sessions, compared to 4-5 sessions with competing devicesLumecca is a breakthrough intense pulsed light (IPL) that delivers up to 3X more energy in the 500-600 nm range to improve efficacy for vascular and pigmented lesions. It is optimized for clinicians to treat a variety of skin types and conditions with just a single session.SR515 – Removal of Pigmented Lesions on Light Skin, Removal of Superficial Vascular Lesions
SR580 – Removal of Pigmented Lesions on DARK SkiN, Removal of DEEP Vascular Lesions, Removal of Vascular Lesions on DARK SkinFORMA
Face Remodeling.
Stimulates the formation of new collagen and improves the skin’s elasticity for long-lasting and remarkable resultsForma is the first auto-adjusting, non-invasive, thermal skin treatment for deep and uniform tissue stimulation. Forma uses radio-frequency power that flows uniformly between the electrodes to provide a comfortable thermal experience with immediate and subsequent contraction. There is no downtime in this effective lunch-time procedure that will make anyone look years younger!Acquire: Forma has a temperature sensor built into the hand piece which reads skin surface temperature 1000 times per second, allowing clinicians to acquire skin temperature in real time.
Control: Software algorithm allows unprecedented safety of RF delivery. The cut off temperature” feature reduces RF energy automatically when the hand piece senses that the required skin temperature has been reached.
Extend: Clinical evidence suggests prolonged exposure to temperature above 40°C is advantageous for optimal clinical outcomes. Only InMode’s A.C.E. technology allows you to utilize therapeutic temperatures safely and efficiently.FRACTORA Inmode Aesthetics Optimas with Lumecca 515 & 580
Radio Frequency MicroNeedling.
Fractora is a fractional skin resurfacing and subdermal tissue coagulation device that bridges the gap between fractional lasers and surgical procedures. Clinical papers demonstrate outcomes such as: improvement in skin complexion, reduction in skin irregularities and restoring skin to a more youthful appearance. This all occurs within one session or multiple sessions, depending on patient preference. Fractora can be used on active cystic acne and acne scars.Addresses multiple problems, including treatment of wrinkles with fractional coagulation and ablation.
Significant resolution of cystic acne and scars (improving acne scarring by 50%).
Safe on skin type VI with little risk of post inflammatory hyperpigmentation (PIH) which is common with other resurfacing methods.
Combination of fractional coagulation and volumetric heating through tips with various depths and pin density configurations.High efficiency of vascular and pigmented lesions due to high peak power and optimized output.
Complete photo rejuvenation in 1 or 2 treatments versus 4-6 treatments with standard IPLs.
Reduces treatment time thanks to large spot size and high pulse repetition rate.
Strong sapphire cooling tip results in painless procedure.
Fast pulse repetition rate at all settings. Highest peak power 3300W*DIOLAZEXL
Diode Hair Removal.
Gold Standard Diode Hair Removal Without Compromising Peak Power, Speed and Large Spot SizeDiolazeXL is the most effective at combining high peak power and a large spot size simultaneously in the same session. Clinicians can benefit from this first and only combination of speed, efficacy, safety and comfort to optimize their hair removal revenue.Gold standard wavelength, pulsing and power for optimal results and maximal safety.
Reduction in clinician treatment time – Powerful enough to target and treat even the most stubborn hair.
Virtually painless due to strong built in cooling.
Can treat up to skin type VI.VASCULAZE
Vascular Lesion Removal.
Get the ultimate in vascular resolution with a fast and chilled leg and facial vein treatmentVascular lesions (including angiomas, telangiectasias, port wine stains and leg veins) can be treated with the Vasculaze. The Vasculaze is optimized with high peak power that targets appropriate hemoglobin, so patients can benefit from a fast and safe treatment.Narrow and ergonomic spot size is optimized for vascular lesion treatment. High peak power. Strong contact cooling. No disposables and consumables.VLAZE
Vascular Lesion Removal.
Fast, powerful and ergonomic laser device. Treats vascular lesions such as veins, spider veins and port wine stains safely, comfortably and effectively on all skin types from very light to darker skin tones.MORPHEUS8
THE FIRST FULL BODY FRACTIONATED TECHNOLOGY
Fractional Remodeling and Contouring At Its BestThe Morpheus8 is a new subdermal adipose remodeling device (SARD) that fractionally remodels and contours the face and body. Penetrating deep into the skin and fat, this morphs the aging face of body into a more desired smooth and sleek appearance, for all skin tones.Deep and safe fractional treatment penetrating 4000 microns with an additional thermal profile of 1000+ microns
Extremely uniform effect
Little to no thermal damage to dermis
Safe on skin type VI with little risk of post inflammatory hyperpigmentation (PIH) which is common with other resurfacing methods. | InMode Contoura RF Body Contouring with BodyFX, MiniFX, & Forma Plus
BodyFX
Vacuum:300 – 500 mBar
RF Output Frequency:Up to 50 W
Output Frequency:1 MHz
Temperature Cut-Off:Real time temperature monitoring and cut off operator selectable to 43°C
MINIFX – Only Available on Newest Generation Contoura’s
Chamber Size:1 inch x 1 inch
RF Output Frequency:Up to 50 W
Output Frequency:1 MHz
Negative Pressure:Up to 500 mBar
Temperature Cut-Off:Real time temperature monitoring and cut-off. Operator selectable up to 43°C
PLUS
RF Output Frequency: Up to 65 W
Output Frequency: 1 MHz
Temperature Cut-Off: Real time temperature measurements set by operator up to 43°C
FULL BODY CONTOURING EXPERIENCE
Contoura is the reshaping solution to maximize patient results.InMode Contoura RF Body Contouring with BodyFX, MiniFX, & Forma PlusWORKSTATIONS
Body contouring is one of the most in-demand aesthetic treatments. In many cases, patients are looking for improvements in body shape without surgical intervention 1. Contoura is a non-invasive body contouring solution that provides treatments that can be done during a lunchtime break.Contoura addresses: Body Reshaping, Cellulite Reduction and Skin Contraction. The Contoura is the ONLY non-invasive body contouring device proven in peer reviewed and published human studies to both permanently kill adipose tissue and contract the skin.PRACTICE BENEFITS
Unlike other body contouring devices (which may carry high per procedure cost), Contoura has zero consumable costs or pulse counters. 4
Contoura is a business solution that allows you to grow your patient base without having to worry about ongoing fees.The use of radio frequency allows owners to provide both skin contraction and fat treatments, of all body areas, in one device. 5 This provides multiple revenue streams to a practices bottom line. This provides multiple revenue streams to a practices bottom line.1. According to the ASAPS 2017 statistical report, non-surgical fat reduction was listed as the third most performed procedure in 2017, after Botox and fillers. Source
2. Treatments take anywhere between 20-60 minutes. A series of 6-8 treatments is recommended.
3. Peer Reviewed Source
4. BodyFX is clinically proven to contract skin and reduce fat.BODYFX
The first and only non-invasive body contouring technology proven in peer reviewed and published human studies to both permanently kill adipose tissue and contract the skin.HOW DOES IT WORK
BodyFX is the first and only non-invasive body contouring and cellulite technology proven in peer reviewed and published human studies to both permanently kill adipose tissue and contract the skin *. BodyFX addresses problematic fatty tissue in larger body areas such as the abdomen, back (flanks), and thighs. BodyFX works by using different clinically proven modalities including radio-frequency energy and negative pressure applied to the skin and underlying fat.BODYFX Benefits
Acquire. Control. Extend. Technology to safely optimize peak energy.
Pre-heating of tissue reduces threshold for selective apoptosis of fat cells.
Sophisticated tissue temperature and impedance monitoring achieves and maintains optimal temperature end points to prevent atrophic damage.
Active temperature monitoring and control with cut-offs for unprecedented safety, virtually eliminating risk of thermal injury.MINIFX – Only Available on Newest Generation Contoura’s
A new, non-invasive solution to reduce the unsightly appearance of cellulite in smaller areas like the arm, neck and knees.HOW DOES IT WORK
MiniFX is a non-invasive contouring and cellulite technology that delivers a combination of clinically proven modalities, similar to the BodyFX, however, addresses problematic fatty tissue in smaller areas like the neck , arms, and knees.MINIFX BENEFITS
Acquire. Control. Extend. Technology to safely optimize peak energy.
Pre-heating of tissue reduces threshold for selective apoptosis of fat cells.
Sophisticated tissue temperature and impedance monitoring achieves and maintains optimal temperature end points to prevent atrophic damage.
Active temperature monitoring and control with cut-offs for unprecedented safety virtually eliminating risk of thermal injury.PLUS
Stimulates the formation of new collagen and improves the skin’s elasticity for long-lasting and remarkable results.HOW DOES IT WORK
Plus is a non-invasive sub-dermal heating applicator that stimulates sub-cutaneous tissue. Radio-frequency energy flows uniformly between the electrodes to provide a comfortable thermal experience, built-in temperature controls allow for the attainment of clinically proven optimal temperatures without concerns of hot spots or under treatment.PLUS Benefits
Acquire: Forma has a temperature sensor built into the hand piece which reads skin surface temperature 1000 times per second, allowing clinicians to acquire skin temperature in real time.
Control: Software algorithm allows unprecedented safety of RF delivery. The cut off temperature” feature reduces RF energy automatically when the hand piece senses that the required skin temperature has been reached.
Extend: Clinical evidence suggests prolonged exposure to temperature above 40°C is advantageous for optimal clinical outcomes. Only InMode’s A.C.E. technology allows you to utilize therapeutic temperatures safely and efficiently. | DENTSPLY SIRONA CEREC PRIMEMILLSpeedEngineered for speed and precision, the new CEREC Primemill inherits the proven strength of its predecessor and raises its powerful performance to entirely new heights.You can now mill zirconia restorations in Super Fast milling mode in around 5 minutes, cutting processing times by more than half. The improved grinding mode for high quality glass ceramics also grinds the material faster than ever before. The result? Satisfied patients and high productivity.QualityDENTSPLY SIRONA CEREC PRIMEMILL A combination of new electronics, software, motors and mechanical components contributes to finer resolution and enhanced dynamics. This results in outstanding restoration margins and surface details – for extremely precise results.The new highly accurate 0.5 mm milling tool reliably delivers first class clinical results. Switch to Extra Fine milling mode for a higher level of detail with occlusal fissures and interdental areas on bridges.VersatilityDENTSPLY SIRONA CEREC PRIMEMILL Welcome to a world where you‘re spoiled for choice! The new CEREC Primemill combines wet and dry milling and wet grinding. No matter the indication, with CEREC Primemill you can select from a broad range of material options from validated partners providing the flexibility and predictability you need to offer patients the best possible treatment.Choose from the full spectrum of machining options, including dry and wet milled zirconia, or wet grinding of glass and hybrid ceramics.ConvenienceDENTSPLY SIRONA CEREC PRIMEMILL The new 7” touch interface with user guidance guides operators step-by-step through the workflow, key maintenance procedures and other routine tasks, so you can delegate milling with complete peace-of-mind. The integrated block scanner is a time-saving new feature that automatically scans material blocks with compatible data matrix codes and records the information, including type, size, color and zirconia enlargement factor. All CEREC Primemill tools are fitted with a color-coded RFID chip that is read by the RFID tool reader, feeding into the tool status display, alerting the user if a tool needs replacing. This ensures all tools are performing at optimal levels. A LED light strip indicates unit status and milling and grinding progress.The all-new CERECThe latest generation of our CEREC system sets new standards so you can offer your patients an unmatched combination of single-visit dentistry and excellent quality.A unique solutionThe CEREC system comprises world-class components that interact perfectly ensuring seamless workflows. With CEREC Primescan, CEREC Software 5 and CEREC Primemill, digital chairside dentistry is faster, easier and more reliable than ever before.Outstanding resultsAfter 35 years of continuous optimization, CEREC gives you the options you need to treat multiple indications with the confidence that comes from outstanding results.
Designed to stand out – and fit inThe new CEREC Primemill does not just communicate seamlessly with other CEREC devices, but its sleek design is also the perfect match – and the ideal look for a progressive dental practice. | INMODE Bodytite Laser – Radio Frequency (RF)BodyTite
Cannula Length:17 cm
Cannula Diameter:2.2 mm
Depth of Treatment:Up to 50 mm (2)
Internal Temperature:Operator adjustable between 50°C – 70°C
External Temperature:Operator adjustable up to 42°C
Output Temperature:1 MHz+
FaceTite
Cannula Length:10 cm
Cannula Diameter:1.3 mm
Depth of Treatment:Up to 25 mm (1″)
Internal Temperature:Operator adjustable between 50°C 70°C
External Temperature:Operator adjustable up to 42°C
Output Frequency:1 MHzBodyTite WorkstationMinimally Invasive Radio-Frequency Assisted Lipolysis (RFAL) Surgical Results Without the Scars.BodyTite is InModes latest minimally-invasive body contouring procedure that provides superior internal and external lipolysis, delivering results only achieved through more extensive excisional surgical procedures. BodyTite is powered by RFAL (Radio-Frequency Assisted Lipolysis) resulting in three-dimensional remodeling.BodyTite provides doctors with a tool to perform arm lifts without excisions, breast lifts without the lollipop scar and contour areas of non-adherence with results previously only achieved through more extensive surgical procedures.Benefits
Controls heating to ensure that large volume contraction is consistent, avoiding overtreated or undertreated area
When treating different areas of the body, the operator is always receiving real time temperature monitoring, even in deep fat areas where laser temperature readers cannot reach
Allows focal treatment of all body areas with large volume
Treats deep fat, up to 50 mm (2 inches)PATIENT BENEFITS
Patients today want to avoid surgery when possible. With BodyTite and FaceTite, your patients can reduce fat without leaving behind saggy, wrinkly skin. They are left with surgical-like results with no scars, less downtime and long-lasting, beautiful results.PRACTICE BENEFITS
Adopting RFAL with three-dimensional skin contraction can help innovate your practice. Leveraging BodyTite and FaceTite for your practice allows you to add a suite of minimally invasive procedures that contours and lifts abdominal, breast, face, neck, arm, thigh and knee tissue.FaceTite
HOW DOES IT WORK
FaceTite is a minimally-invasive contouring solution for the face and small areas of the body. Physicians can achieve results similar to a facelift or brachioplasty without excisional surgery. This is a safe, effective and exciting treatment that offers patients significant aesthetic changes.FaceTite is powered by RFAL (Radio-Frequency Assisted Lipolysis) and provides superior internal and external lipolysis, resulting in three-dimensional remodeling of the fibrous septa. Built-in safeguards including real time measurements of skin temperature, impedance monitoring, power cut-off and audible feedback help ensure patient safetyBenefits INMODE Bodytite Laser – Radio Frequency (RF)
Uniform thermal field provides an even distribution of heat.
Dual temperature technologies provide greater safety and control compared to other technologies.
100% energy concentration in the treatment zone.
Physician sets and controls the temperatures. Heat gradient enables optimal treatment results.AccuTite
ACCURACY IS EVERYTHING
PRECISION TARGETING AND PROVEN PERFORMANCE
ACCURACY IS EVERYTHING
The new AccuTite makes focal RF contraction without excisional surgery the new standard in cosmetic medicine. Small, but mighty, the AccuTite delivers precision heating in addition to the science and safety recognized with the Radio-Frequency Assisted Lipolysis (RFAL) family of technologies.
FOR FACE AND BODY
FACEBrow
Periorbital
Nasolabial Fold
Lower Face
Neck
BODYAxilla Bra Fat
Upper Arms
Hands
Abdomen Etching
Inner Thigh
Knees
Womens Health & WellnessSIMPLE, SAFE & FOCUSED
The AccuTite is the smallest minimally-invasive radio-frequency contraction device with the most number of clinical studies and peer-reviewed publications backing its safety and efficacy. Patients who need precision fat reduction or skin contraction now have a new solution that can be done under local anesthesia, in an office setting, in less than 20 minutes, without excisional surgery. | Endymed Pro Hair Laser3Deep iFine Handpiece – Eye & Mouth Area Skin Tightening Handpiece
Specifically designed to treat the hard to reach, delicate skin tissue around the eyes and mouth.
The revolutionary iFine handpiece provides:.
Smoother, tighter skin around the eyes
Reduced under eye sagging and improved eye contour
Reduced hooding to reveal more of the eyelid
More youthful, less tired looking eyes
Reduction in the fine lines around the mouthEndymed Pro Hair Laser 3Deep Intensif Handpiece – Fractional Microneedling RF Skin Remodeling
Specifically designed to treat acne scars, deep wrinkles, stretch marks and other conditions requiring deep dermal heating. The Intensif Handpiece applies an array of micro-diameter needles to safely and effectively deliver focused RF energy deep into the dermis, providing a revolutionary collagen remodeling solution for acne scar treatment and deep wrinkle reduction, with minimal discomfort and downtime.Endymed Pro Hair Laser 3DEEP Large Handpiece – Body Contouring & Skin Tightening Handpiece
Specifically designed for treatment of larger body areas, such as the abdomen, buttocks and thighs, for treating skin laxity, cellulite, body shaping and circumference reduction.3Deep Shaper Handpiece – Body Contouring & Skin Tightening Handpiece
Specifically designed for treatment of larger body areas, such as the abdomen, buttocks and thighs, for treating skin laxity, cellulite, body shaping and circumference reduction – larger coverage than the Large Handpiece.3DEEP Small – Body Tightening Handpiece
Specially designed for the treatment of wrinkles and lax skin on the face and neck, including forehead, temples, cheeks and under chin areas.3DEEP Fine – Facial Tightening Handpiece
Specially designed for skin laxity treatment of smaller body areas, such as peri-umbilical, neck, arms and knees.Fractional Skin Resurfacing Handpiece
The Fractional Skin Resurfacing (FSR) handpiece was developed by experts in dermatology, RF technology and ergonomics. Specially designed for fractional skin resurfacing and the treatment of skin roughness, hyperpigmentation, wrinkles and scars on both facial and body areas.3DEEP has 7 peer reviews and 86.7% efficasy
Results in 18 min WITH NO SWELLING on a 10×10 cm area.Ultimate in versatility, offering a multitude of treatment options in one radio frequency device. Utilizing proprietary 3DEEP™ technology, the EndyMed PRO provides deep dermal heating and collagen remodeling.PATIENT BENEFITS
• Highly effective
• Customized treatment parameters
• Optimal safety with minimal discomfort and no side effects
• Short treatment with minimal downtime
• Noticeable immediate improvement
• Long term resultsPHYSICIAN BENEFITS
• Effective solutions for anti-wrinkles, skin tightening, fractional skin resurfacing and body contouring
• Fast, walk-in / walk-out procedure for optimal patient satisfaction
• Customized treatment plan with preset default parameters
• Suitable for the complete range of skin types
• Single platform growth plan
• No consumables (for the 3Deep handpieces) and low priced consumables (for the FSR handpiece) for rapid ROI and profitability |
Reviews
There are no reviews yet.