| Content | Cutera Trusculpt Flex
Cutera Trusculpt Flex :Strengthening, toning, and firming of abdominal muscles
Strengthening, toning, and firming of buttocks and thighsWondering if TruSculpt Flex is right for you? Benefits of TruSculpt Flex include :Tones your body without the pain of a workout
Achieves your ideal buttocks contours
Sculpts your abdominals for 4- or 6-pack abs (your choice!)
Tightens and lift your thighs
Improves your entire body at once
Delivers results you can’t get at the gym!
Results within three weeks
Reduces back pain
Improves athletic performance
Convenient, non-invasive treatment
Safe, FDA-approved way to contour the bodyTime For Your Practice To Flex Its MusclestruSculpt flex is a muscle sculpting device that offers personalized treatments based on patient fitness level, shape, and goals. Only truSculpt flex with Multi-Directional Stimulation (MDS) deploys a unique method of electrical muscle stimulation to target specific muscle groups using three treatment mode options, covering the largest treatment area in the body sculpting industry.truSculpt flex TechnologyMulti-Directional Stimulation MDSUnique delivery of direct electrical muscle stimulation to treat specific muscle groups using three treatment mode options. Low levels of energy achieve deep muscle contractions at high intensity via a proprietary handpiece design with truGel.truControlSafe and consistent results through targeted, selective, and customizable delivery with less energy.Personalized and selective
Targeted energy delivery
Treats 8 areas simultaneously
Offers 3 treatment modes
Delivers high throughput and ROItruSculpt flex Treatment ModesThe treatment mode options are designed to simulate different workouts by replicating intensified twisting, squat, and crunch actions.Prep ModeCreates a twisting motion to warm up, stretch the muscles and slowly build a tolerance to muscle contractions.
Tone ModeContracts the muscles, holds it to the point of exhaustion, and then relaxes it to increase strength and enhance endurance.
Sculpt ModeFast, deep, sequential contractions of the muscles to build muscle mass and increase basal metabolic rate (BMR).truBody by truSculptEnhance your patients’ body sculpting results with truBody.Pair truSculpt flex with truSculpt iD, Cutera’s non-invasive body sculpting treatment for permanent fat reduction, to safely and effectively remove fat, rebuild muscle, and renew skin.truBody is the only procedure that provides the benefits of direct bio-electrical muscle stimulation and 2 MHz monopolar RF to create long-lasting effects. Multiple handpieces simultaneously treat multiple problem areas in a short treatment time, to differentiates your practice with high throughput and revenue. | Thermi Aesthetics ThermiRF System
Thermi Aesthetics ThermiRF System Specification :Input Power:100-120/200-240V ± 10%, 50/60 Hz
Output Power:20 watts (maximum) 50-300 Ω 0-10 volts, in Stimulate Mode
Maximum Output Voltage:80V, rms
Operating Frequency:460 kHz (± 5kHz)
Set Temperature Range:35-95°C; this range varies for each Power Delivery Mode
Dimensions:5.75″ H X 12.5″ W X 13.0″ D (146mm X 318mm X 330mm)
Weight:12.6 lbs (5.7kg)The First Injectable Radio Frequency
Included Applications:ThermiTight
Controlled Subdermal Tissue Heating
ThermiTight is an application of the ThermiRF device, which is FDA cleared and indicated for use in dermatological and general surgical procedures for electrocoagulation and hemostasis. The ThermiRF device heats tissue to achieve electrocoagulation and hemostasis by utilizing radiofrequency electrical energy.ThermiSmooth Face
Controlled Non-Invasive Tissue Heating
ThermiSmooth Face is an application of the ThermiRF device, which is FDA cleared and indicated for use in dermatological and general surgical procedures for electrocoagulation and hemostasis. The ThermiRF device heats tissue to achieve electrocoagulation and hemostasis by utilizing radiofrequency electrical energy.ThermiDry
Treatment for excess sweating.ThermiRase
Toxin-free Disabling of Nerves
ThermiRase is an application of the ThermiRF device, which is FDA cleared and indicated for creating lesions in nerves. The ThermiRF device creates lesions in nerves utilizing radiofrequency electrical energy to heat them.ADD ON APPLICATION:
ThermiVa
Non-invasive Vulvovaginal Application
ThermiVa applications use radiofrequency energy to gently heat tissue. The patent pending ThermiVa electrode is designed for applications including the vaginal anatomy.ThermiRF is a unique thermistor-regulated radiofrequency technology designed to safely produce excellent aesthetic outcomes through the application of the science of heat. This is a platform technology, which combines precision temperature control with advanced real-time temperature monitoring to enable a myriad of soft tissue applications.Science of Heat
Multi-procedure platform using temperature as a clinical endpoint:
Smooth skin @ 42C
Shrink fibrous septae at 55-65C
Melt fat @70C
Disable nerves @ 85CThermiRF Platform bundle includes:
Temperature controlled RF Generator
Workstation cart
ThermiView infrared camera with monitor
Peripheral nerve stimulator
Starter supplies (assorted InjectableRF electrodes)
Non-invasive hand pieceAccessories:
Personal Workstation
FLIR E40 IR Camera, Tripod Adapter, Display Monitor
Peripheral Nerve StimulatorThe ThermiRF system and probes are FDA cleared (K130689) and indicated for use in dermatological and general surgical procedures for electrocoagulation and hemostasis; creation of lesions in nervous tissue.Does ThermiRF with ThermiVA Require Consumables? Yes
Do the Consumables needed have to be purchased from ThermiAesthetics? Yes2015 Thermi Aesthetics ThermiRF System with ThermiSmooth Cellulite Smoothing, ThermiTight & ThermiVa Radio Frequency Vaginal Rejuvenation System with ThermiVA Wand. Includes: Thermi CRF Unit, ThermiVA Wand, Herga Foot Pedal, Thermi Stimpod NMS415, Samsung 20 Video External Monitor w/ cables, Reusable RF Electrode 10 mm RFE-10-D, Thermi RF Electrode Adapter Cable AC-RFDE-VA, RFDE-VA-1 Disposable ThermiVa Electrode, (7) R-KIT-10-18, D-KIT-10-18, (3) R-KIT-15-18, (2) D-KIT-15-18, (7) D-T-KIT-8-22-10, D-KIT-5-20, RFE-10-5, RFE-15-5, (6) Dispersive Electrode #2130AC, (4) RF-DGP-S Grounding Pads, (3) Ultrasound Cooling Gel, (3) Cable Adapters AC-SN-DUS, FLIR E40 Infrared Camera w/ carrying case and tripod adapter, Vanguard Alta Tripod, (4) Thermi standup posters, ThermiVa, Thermi Smooth, Thermi Tight, (100) ThermiVa Patient Brochures, Thermi RF User Manual, Thermi Smooth User Manual, USB Patient Presentation FlashDrive and 180 Day Warranty. | Cutera Solera Opus
Cutera Solera Opus Specifications :Laser Type:Pulsed-Light Flashlamp
Wavelength:500-1200nm
Output:Greater or Less than 120 J
Fluence:2 to 65 J/cm2
Exposure Duration:Automatic
Repetition Rate:Up to 1.0 Hz
Delivery System:User Detachable Umbilical Cable and Handpiece
Treatment Spot:10mm x 30mm Rectangle
Epidermal Cooling:Sapphire Window is Maintained at Temperature to Prevent Window Heating
System Cooling:Self-Contained, Water to Air Heat Exchanger
Aiming Beam:NoneThe Solera Opus is a compact, portable, tabletop console that is capable of providing a variety of aesthetic skin treatments with a wide variety of Cutera flashlamp handpieces, Additionally, given its ability to predictably operate with new handpieces as they are developed, the Solera Opus is a reliable clinical instrument that can grow alongside new technology.Typically, the Solera Opus is used with four specific handpieces: the ProWave 770, the AcuTip 500, the LP560, OPS600 and the Limelight. All designed to be user-detachable, the handpieces each function with an umbilical cable that brings coolant and electrical utilities from the console to the handpiece.The ProWave 770, functioning with three wavelengths on a 770 1100 nm scale, uses selective photothermolysis to treat the targeted tissue without damaging the surrounding skin cells in light-based hair removal.Similarly, the AcuTip 500 is a precision targeting tool that employs selective photothermolysis to provide lesion treatments.The LP560 and OPS600, on the other hand, are pulsed-light handpieces that are visible to the human eye thus requiring no aiming beams and are instrumental in the treatment of benign pigmented lesions. The main difference between the two is that the LP560 operates at 560 1200 nm while the OPS600 operates at 600 850 nm.The LimeLight is an IPL device used to treat benign pigmented lesions, vascular lesions and is also for photorejuvenation. It operates on wavelength of 520 to 100nm.While the Solera Opus utilizes different handpieces to target different treatments, the main options for treatment include: benign pigmented lesions; vascular lesions; and stable, long-term, or permanent unwanted hair removal. The console can also be used in the treatment of superficial telangiectasia, or spider veins, when used with the correct handpiece.The Solera Opus Is Easy To MaintainAs with any piece of equipment, the Solera Opus is set up for long-term use given that preventive maintenance, safety, power, and calibration checks are performed on an annual or as-needed basis. If the machine is routinely used, annual checks should be sufficient; however, if the system is not regularly used, checks should be performed every six months. All maintenance checks should also be conducted by a certified Cutera representative. Regular cleaning, though, can be performed by the technician and is a simple matter of disinfecting the materials in the following manner:External surfaces: Using a clean cloth dampened with a non-caustic cleaning solution (i.e. mild soap and water, isopropyl alcohol, or hospital grade disinfectant), disinfect the outside surfaces and then allow to air dry.Touchscreen display: Use a soft cloth with an alcohol-based cleaner to wipe the surfaces clean.Handpiece: Follow the guidelines within the individual handpiece manuals.Coolant checks (upon initial arrival and for the occasional top-off): Turn off the system, remove and fill the reservoir with distilled water, turn the keyswitch on to activate the water pump, run for five or ten seconds, top off the reservoir and repeat the process until the reservoir is completely full.Confirming calibration: While the Solera Opus is not a laser system and consumers cannot alter the system calibration, calibration should be checked every twelve months or so by a certified engineer or technician trained on energized electronic pulsed-light equipment with a laser energy meter.2017 Cutera Solera Opus with LP560 Handpiece. Included Handpiece & Pulses: LP 560 Handpiece = 36,319 Pulses; Also Includes: Operator Eyewear, Footswitch, Keys and 180 Day Warranty. | 2017 Cutera Excel HR 1064nm & 755nm Hair RemovalAlexandrite | | Wavelength | 755 nm | Maximum Energy | 53J | Pulse Duration | 3 ms | Spot Size | 5-18 mm | Repetition Rate | 2 Hz | | | Nd Yag | | Wavelength | 1064 nm | Maximum Energy | 80J | Pulse Duration | 0.1 – 300 ms | Spot Size | 3-12 mm | Repetition Rate | Up to 10 Hz | Cooling | Contact Sapphire | Aiming Beam | 635 nm | Dimensions | 35″ H x 12″ W x 24″ D | Electricial | 200-240 VAC, 50/60 Hz, 20A/30A | | | Cooling | Contact Sapphire | Aiming Beam | 635 nm | Dimensions | 35″ H x 12″ W x 24″ D | Electricial | 200-240 VAC, 50/60 Hz, 20A/30A |
MANUFACTURER NOTES Superior, Comfortable Laser Hair Removal Laser Hair Removal – An In-demand Procedure Global hair removal procedures are growing at a rapid pace. Laser hair removal has been among the top non-surgical procedures according to the American Society of Aesthetic Plastic Surgery and procedure revenue is anticipated to go to $1.35B by 20221. The industry often refers to laser hair removal as a gateway procedure as it offers an entry point into the aesthetic market for patients and practitioners alike. excel HR combines a high-power 755 nm Alexandrite laser and Cutera’s proven long-pulse 1064 nm Nd:YAG laser for safe, effective high-volume hair removal on all skin types. The combination of wavelengths not only allows for effective hair removal, but is also a solution for epidermal pigmented lesions, vascular lesions, and Cutera’s signature laser genesis skin revitalization procedure. excel HR Technology Proven Wavelengths excel HR combines the gold standard laser wavelengths for hair removal. The 755 nm Alexandrite laser is highly absorbed by melanin making it an ideal solution for finer hair on skin types I-III. Because of the high melanin absorption characteristics, it has also been proven to provide long-term results on epidermal pigmented lesions. The 1064 nm Nd:YAG is the safest wavelength for permanent hair reduction on darker skin types and tanned skin. By selecting the appropriate spot size, this laser can also be used for treating facial and leg veins and perform laser genesis procedures. truPulse Delivery with Index Matching Unique to Cutera, the truPulse technology delivers constant, sustained energy throughout the pulse duration to ensure consistent performance and proven clinical outcomes for your patients. excel HR’s index matching delivery results in more efficient coupling of laser energy to target structures. Index matching allows backscattered light to escape, further protecting the epidermis from heat build-up while maintaining treatment efficacy. Superior Contact Cooling excel HR utilizes sapphire contact cooling to provide continuous cooling, maximizing your patients’ comfort and treatment safety. In a patient preference study that measured comfort and satisfaction for laser hair removal, 100% of the patient’s preferred excel HR over a comparable, competitive laser hair removal procedure. 321st Century Laser Hair Removal System Developed by the innovative leader in aesthetic laser technology, excel HR™ laser hair removal system provides advanced premium hair removal solutions for every skin type. Combining a new high-power 755 nm Alexandrite laser, and CUTERA’s proven long-pulse 1064 nm Nd:YAG laser, coupled with the superiority of sapphire contact cooling, excel HR redefines modern laser hair removal. This makes excel HR laser system an effective, safe and comfortable option for laser hair removal for the 21st century. Applications 2017 Cutera Excel HR 1064nm & 755nm Hair Removal - Hair removal
- Benign pigmented lesion removal – All Skin Types I-IV
- Veins, facial
- Veins, leG
- Laser Genesis
| 2019 Merz Cellfina Microblade Cellulite Reduction
The Cellfina System is intended for long-term improvement in the appearance of cellulite in the buttocks and thigh areas of adult females.Tissue Stabilized-Guided
Subcision (TS-GS)
Cellfina combines highly advanced, proprietary technology with a well-established procedure called Subcision to provide precise and reproducible results.The in-office procedure takes approximately 45 minutes, depending on the patient and number of areas being treated
External system allows procedure to be used in a physician setting (no operating room needed)
Significant, rapid, reproducible results
Limited downtime with quick recoveryControlled Anesthetic Infiltration
Infiltrates at depth of release with multi-hole, 22G needle
Simplifies procedure and increases effectivenessRapid Tissue Release
Uses a reciprocating, precision, micro-blade that snaps on to an ergonomic hand piece
Stabilizes tissue for exact and controlled release, leading to precise and reproducible resultsMerz Cellfina Microblade Cellulite Reduction System is intended for long-term improvement in the appearance of cellulite in the buttocks and thigh areas of adult females.Tissue Stabilized-Guided
Subcision (TS-GS)
Cellfina combines highly advanced, proprietary technology with a well-established procedure called Subcision to provide precise and reproducible results.The in-office procedure takes approximately 45 minutes, depending on the patient and number of areas being treated
External system allows procedure to be used in a physician setting (no operating room needed)
Significant, rapid, reproducible results
Limited downtime with quick recoveryControlled Anesthetic Infiltration
Infiltrates at depth of release with multi-hole, 22G needle
Simplifies procedure and increases effectivenessRapid Tissue Release
Uses a reciprocating, precision, micro-blade that snaps on to an ergonomic hand piece
Stabilizes tissue for exact and controlled release, leading to precise and reproducible resultsHow Cellfina Works to Improve the Appearance of Cellulite?The Cellfina System treats the primary structural cause of cellulite—the connective bands woven throughout fat in the thighs and buttocks. These tight bands pull down the skin, creating the puckering you see on the surface of the skin. Similar to a rubber band under tension, once released, the treated skin bounces back to smooth itself out in as little as three days. This one-time cellulite treatment is performed at a doctor’s office in less than an hour.Proven Efficacy and Safety 2019 Merz Cellfina Microblade Cellulite ReductionThe FDA-cleared Cellfina cellulite treatment typically takes less than an hour. Performed by a qualified physician in an office setting, Cellfina combines a proven approach with innovative, proprietary technology to treat the primary structural cause of cellulite. First, cellulite dimples are marked. Then, the provider delivers a local numbing agent followed by the treatment itself. Afterward, patients are able to go about their day, but may want to take it easy for up to 24 hours. Results are visible in as little as three days and those results are still evident three years after treatment.Limited DowntimeAfter the Cellfina cellulitetreatment, patients can go about their day, but may want to take it easy for up to 24 hours. There have been no serious adverse events associated with Cellfina. The most common side effects reported by patients in the FDA-cleared pivotal study were soreness and bruising. Over 90% of patients had no bruising at four weeks after the cellulite procedure. For full product and safety information, including possible mild side effects, visit cellfina.com/IFU. | OSYRIS LIPOTHERME PHARAON 980 LASER – DIODEOSYRIS Lipotherme Pharaon 980 Laser – DiodeLaser Type:Diode
Wavelength:970 nm
Optical Power:25 Watts
Fiber Connector:SMA 905
Cooling:Pelier Module and Air
Laser Safety Class:4
Supply Voltage:110 – 240 VAC
Frequency Sector:50 – 60 HzLaser Lipolysis with Lipotherme offers:- Minimally invasive vs. traditional liposuction
- Faster procedure to have performed, usually as an “in office” procedure
- Minimal Healing – less destruction to blood vessels and tissues near the fat cells means less blood loss and reduced post procedure downtime.
- Minimal Discomfort and typically performed under Local AnesethiaThe clinical term for this type of procedure is laser-assisted lipolysis (also called laser lipolysis or laser lipo for short) which is an evolution of traditional liposuction. Although effective, traditional liposuction is considered a highly invasive procedure. By contrast, Lipotherme laser lipolysis is a minimally-invasive procedure with virtually no downtime. Most patients resume normal activities the day after their procedure, however, it is recommended you wait several days before resuming strenuous activity such as exercising. Depending on your goals and physical condition, Lipotherme can be an alternative to traditional liposuction, or your doctor may recommend a combination therapy of Lipotherme with traditional liposuction.
Osyris Medical Lipotherme Applications:- Laser-assisted lipolysis
- Skin tightening
- Collagen regeneration
- Circumferential reduction
- Body contouring
Osyris Medical Lipotherme Features:- Laser: red diode 980 nm
- Output: one to 25 watts
- Pulse duration: θ (continuous)
- Fiber: 600 µm
- Variable power control
- Cooling system: Peltier and air
- Electric power: 110-240 VAC, 50 to 60 Hz
- Weight: 33 pounds
- Dimensions: 17 by 17 by 14 inches
Lipotherme Benefits:
* Lipotherme is a safe, effective, minimally invasive procedure that uses a laser to liquefy and remove unwanted fat in targeted body zones. In addition to removing unwanted fat, Lipotherme’s thermal effect causes the skin to contract, resulting in firmer, smoother skin that further enhances your body shaping goals.* The Lipotherme continuous wave diode laser operates with a unique 980 nm source filter that emits from one to 25 watts of power in a continuous wave, unlike the Nd:YAG lasers, which emit pulsed waves.* The power is variable so that physicians can customize the treatment for each patient and body area. For example, 6 W may be appropriate for the chin, arms, and knees, while 15 W may be appropriate for the thighs, hips, and buttocks.OSYRIS Lipotherme Pharaon 980 Laser – DiodeExotherme is a transcutaneous vascular laser, dedicated to spider veins and telangiectasias, up to 2mm of diameter, for a safe, efficient and painless treatment.Principle
The principle of the Exotherme laser is based on the thermal action of the laser. The transcutaneous irradiation (with a penetration of 1 to 2 mm in the tissue) causes tissue selective absorption by hemeglobin (hemoglobin is the main target of the laser).The effect of selective photocoagulation is based on two effects:Conversion of light energy into heat,
Coagulation of the vascular wall with collagen denaturation.
Selective photocoagulation does not cause purpura (contrary to photothermolysis).The superficial vessels, from 0.2 to 2 mm of diameter.Spider veins
Telangectasias
Exotherme is cleared on the US market for the photocoaguation of leg telangiecatasias. |
Reviews
There are no reviews yet.