| Description | Designed for fast and efficient diode laser procedures, the Epic X diode laser features cutting edge software, and a cordless foot pedal. It is capable of a full range of soft tissue procedures as well as laser-assisted whitening and pain relief therapy. An enhanced ComfortPulse setting is designed to improve patient comfort, and with new preinitiated tips, the laser is ready for treatment in as little as 2 seconds. | The E4 boasts double the speed, double the accuracy, and double as many cameras as its predecessor the E3, delivering improved efficiency and consistency with every scan. From small labs seeking the best-of-the-best, to high-volume, full-service labs striving for a leaner workflow, our E4 lab scanner is the right choice for you. | Eco mode
• The unit switches off all unnecessary components in idle mode.
• The unit can be restarted in less than 1 second at any time.
• Consumption of just 10 W in Eco mode compared to 200 W in
standby mode.
The advantages for you:
• Active reduction of lamp wear and tear
• Reduction of operating costs | The GentleWave system is the next evolution in endodontic technology that has transformed an ever-expanding network of progressive practices across the country. The high-tech irrigation process of the GentleWave system harnesses optimized procedure fluids, vortical flow and broad-spectrum acoustic energies to debride and disinfect the root canal system. | Caries diagnostic aid for surface caries.
TRIOS 4 has built-in fluorescent technology that aids in the identification of possible caries. Using TRIOS 4, dental professionals can now be aided in the early-detection of surface caries, without the need for an additional scanning device.
Caries diagnostic aid for interproximal caries.
TRIOS 4 will also feature a dedicated transillumination smart tip later this year. The smart tip will aid in the identification of possible interproximal caries undetectable to the eye, without emitting radiation. | The Clio Digital X-ray Sensor is equipped with a patented, Kevlar reinforced cable to provide maximum durability. Unlike other products, the USB cable of the Clio is fully replaceable if damaged. Constructed with special shock absorbers inside the sensor housing to protect components from exterior damage, the Clio is also one of the few fully water submersible sensors, sealed with a unique rubber polymer interior housing. |
| Content | Biolase EPIC X Diode LaserSurgery, Whitening and Pain Relief — All at Your Fingertips:- Portable for easy transport (no more cords)
- Intuitive procedure based Interface
- Fastest in-office whitening treatment
- ComfortPulse™ technology to limit heat production
- TMJ and pain relief – Exclusive to Epic X!
- Pre-initiated tips for maximum performance with minimum chair time – Exclusive to Epic X!
- Peace of mind, knowing you’re covered with a replacement Epic X within 24 hours should yours need service – Exclusive to Epic X!
Get to Treatment, FasterChoose from standard diode laser tips or our exclusive pre-initiated tips to begin laser therapy faster than ever. Create Bright Smiles, FasterEpic X offers the fastest in-office whitening procedure available today. Faster than ever, with dramatic shade change in 20 minutes of chair time. Provide Pain Relief, FasterEpic X is cleared for temporary relief of minor pain, including pain associated with TMJ or other thermomandibular disorders.
The Epic X diode laser is the premier and most complete diode laser for the whole dental team. | 3Shape E4 Dental Lab ScannerThe E4 is a dental 3D scanner produced by 3Shape. 3Shape is a 3D scanner manufacturer based in Denmark.E4 dental scanner main features- Full arch scan in 9 seconds
- 4-micron accuracy
- Four 5-MP cameras
- Color acquisition
3SHAPE E4
Ultimate productivity with our fastest scanner ever
For those seeking the speed and accuracy to drive lab productivity and growth, look no further. The E4 boasts double the speed, double the accuracy, and double as many cameras as its predecessor the E3, delivering improved efficiency and consistency with every scan. From small labs seeking the best-of-the-best, to high-volume, full-service labs striving for a leaner workflow, our E4 lab scanner is the right choice for you.
4 micron
Scan with an accuracy of 4 microns (ISO 12836) for great case results. Combine this precision with increased speed and you can take on more implant cases, for example.
4 cameras
Four cameras save you time by scanning dies in the model instead of individually. You can even scan impressions instead of producing a gypsum model or combine impression and die at the same time.
5MP cameras
5MP cameras are super high definition cameras. They record 5 megapixel images with enhanced camera sensors, meaning you get superior image clarity and can do high-precision scanning.
HARDWARE SPECIFICS
The E4 is a marriage of iconic 3Shape design and superior technical specifications.
Cameras
Four 5 MP cameras enables efficient die scanning and impression scanning, improving your workflows by saving time
Accuracy
4 microns (ISO 12836), giving you the accuracy and precision you need for implant cases
Full arch scan speed 9 seconds (versus 22 seconds for the 3Shape E3)
Full arch impressions scan speed 45 seconds
Texture Color
Scanning strategy Die-in-model | BEGO LASERSTAR T DENTAL LABORATORY LASER SYSTEMThe product is a welding unit which is powerful and compact device. The features provided are user friendly of device. The welding energy is controlled with pulse time, adjustable focus and charging voltage provides perfect welding. The control arrangement and the comfortable design help in working suitably and without being tired. The large touch screen color display offers easy operation and intuitive navigation. The product uses pulse shaping for crack-free joints and high strength stress.- Technology:laser
- Applications:dental laboratory
BEGO LASERSTAR T DENTAL LABORATORY LASER SYSTEM Quick and efficient working
With laser welding, you can reduce the time required by up to
80% since solder preparation and the use of welding flux is not
necessary: A soldering model is not required – work can be
conveniently performed directly on the master model.
The advantages for you:
• Time savings with laser welding as a state-of-the-art joining
technology
• Protection of resources since additional soldering materials are
not requiredBEGO LASERSTAR T DENTAL LABORATORY LASER SYSTEM Large colour touch display
The LaserStar T plus is operated and controlled using a 5.7 inch
colour touch display which offers quick response times and
simple menu navigation The large active area of 5.7 inches as
well as the simple menu navigation present a real improvement
in terms of operation compared to more conventional concepts.
The advantage for you:
• Convenient, intuitive operationBEGO LASERSTAR T DENTAL LABORATORY LASER SYSTEM Maximum stability and biocompatibility
Compared to soldered connections, the joints created with deep
welding are high-strength, as well as being mechanically far
more resilient and durable.
By not using base solder, real laser welding enables a homogeneous alloy structure to be created and galvanic corrosion to be
effectively prevented.
The advantage for you:
• Additional safety and reliability for your customers and patientsPrecise welding
The adjustable focus of 0.2 – 2.6 mm ensures high-strength
joints by means of targeted punctual welding, even with thin
orthodontic wires or in interdental spaces.
Regardless of whether bridge or supra constructions: Compared
to soldering, laser welding guarantees far great accuracy of fit.
The advantage for you:
• Perfect welding results for a large range of indicationsEco mode
• The unit switches off all unnecessary components in idle mode.
• The unit can be restarted in less than 1 second at any time.
• Consumption of just 10 W in Eco mode compared to 200 W in
standby mode.
The advantages for you:
• Active reduction of lamp wear and tear
• Reduction of operating costs | Sonendo gentlewave dental laser endodontic root
Sonendo Gentle Wave Dental Laser Endodontic Root Specifications
Manufacturer: Sonendo
Model: Gentle Wave
Serial Number: (Contact Us)
Power Requirements: 100-240V, 50-60Hz
Year: Not available
Laser Style: Cart
Fiber-Optic Trunk Condition:Functional
Laser Type:EndodonticSonendo Gentle Wave Dental Laser Endodontic Root141116 Sonendo 01The GentleWave System gives the clinician options. It can be used either as an adjunct to traditional treatment protocols or as the primary treatment method with “minimum shaping.” Regardless of shaping protocol, the obturation method is performed with the clinician’s preferred technique. Treatment can be simpler, faster, and performed with less iatrogenic potential as GentleWave™ instrumentation protocols can be greatly simplified relative to existing instrumentation concepts. Minimal shaping protocols remove less tooth structure, which could possibly reduce the chance of vertical root fracture while cleaning canals to a degree never before possible. Because it is less technique sensitive, the GentleWave System can contribute to a treatment that may be less stressful and less invasive for the patient.Sonendo’s GentleWave technology is provided by a handpiece connected to a freestanding, ergonomic, mobile console containing a reservoir of sodium hypochlorite, EDTA, and distilled water. The device has a user-friendly interactive screen that guides the clinician through each step sequentially.The GentleWave System automatically cycles the treatment fluids through the device and into the entire canal system in a closed loop environment. As the fluids move through the treatment tip and into the canals, multisonic energy is created. This sonic energy presents in the form of specific wide spectrum wavelengths using different frequencies, aiding greatly in tissue and debris dissolution and removal as well as disinfection of root canals system. Aside from a preoperative system leakage test, at present, the total treatment time is less than 10 minutes.Current methods of endodontic cleaning and shaping are limited, as no current cleaning and shaping technique is able to predictably remove bacteria, biofilm, and tissue from canal systems. In addition, no current instrumentation system touches all canal walls. As a result, bacteria are commonly entombed in the dentinal tubules and isthmuses after endodontic treatment. Today’s “state of the art” is technique-sensitive, operator-sensitive, and greatly affected by anatomic complexity and patient cooperation.1,2Sonendo gentlewave dental laser endodontic rootSonendo Gentle Wave Dental Laser has provided an innovative and unrivaled method designed to create “ultraclean” canals in order to overcome current limitations and challenges. The GentleWave System is capable of removing all tissue, smear layer, biofilm, and bacteria from the tubules to a very deep level that is not typically seen in traditional endodontic treatment.3 | 3Shape TRIOS 4 Intraoral ScannerOur most powerful intraoral scanner to date Take your dentistry beyond treatment
Our intraoral scanning solutions allow you to take your dentistry beyond. The new 3Shape TRIOS 4 combines our established superior scanning technology with groundbreaking caries diagnostic aid technology* for both surface and interproximal caries. No additional scanning device needed. Smart tips 3Shape TRIOS 4 Intraoral ScannerThe new generation of TRIOS smart tips feature instant-heat technology for optimized scanning.Be scan-ready in seconds with instant-heat technology.Scan 2-3 times as many patients with instant-heat in combination with 30% more battery life.Optimal scanning due to automatic use counter and tip-change alert.The TRIOS system is a complete in-house ecosystem including a scanner and extensive design software. This means there are plenty of options depending on your needs. Those who are just looking for a scanner and want to utilize labs may look into the basic, cheaper options. Those who want to design crowns, bridges and other prosthetics can opt for design modules. The only missing component is a milling machine, which if you want to mill restorations in-house, will have to be from a third party. This proves to be a weak link in the digital chain.At iDD, we have been using the TRIOS 3 for over four years in our clinic, spending literally thousands of hours learning the workflow. We have carried out all aspects of dentistry using the TRIOS system including same-day crowns, implant surgical guides, implant restorations and digital smile design.Disclaimer: This is an impartial review of the scanner and we do not have any ties to the company. The team at iDD remain unwaveringly committed to providing you with objective and trustworthy information and therefore do not seek any sponsorship. 3Shape kindly loaned us a TRIOS 4 scanner, due to a personal interest in upgrading our older TRIOS 3 model. Our team at iDD are constantly approached by scanner companies to review their scanners and it is always made clear that they will have no part in writing reviews or restricting any conclusions iDD makes in our thorough analysis and clinical use of these products. | SOTA Clio Digital X-Ray Sensor Size 2
SOTA Clio Digital X-Ray Sensor Size 2The Clio Digital Dental X-Ray Sensors have Next Generation CMOS technology, fiber optic sensors create 20+ actual line pairs per mm (26.3 theoretical line pairs per mm).With our Cliosoft Imaging Software, we can gaurantee our Clio Digital Dental X-Ray images match up or surpass any competing system. We make this promise based on feedback from actual dentists.Rounded edges allow for maximum patient comfort. Ideal intraoral sensor width and thinness in two sizes for pedo and adult.The Clio Digital X-Ray Sensors maximize image area ratio, minimizing cutoff space to mimic the size of traditional x-ray film. Next Generation CMOS technology fiber optic sensors create 20+ actual line pairs per mm (26.3 theoretical). With our user-friendly, tablet and PC-ready cliosoft Digitial Imaging Software, we guarantee the highest quality images in the industry.Features:– All new Direct Integration Technology
– Thin sensor hardware with rounded corners for maximum comfort
– Direct USB cable with no docking station
– Repairable USB cable for longevity of sensors
– Fiber optic plate sensors for low-noise ratio
– Largest active area for maximum coverage
– Fully waterproof sensor head with sealed cable and housing design
– USB connector: USB 2.0, USB 3.0
– Sensor Technology
– Next Generation CMOS Fiber optic Sensors
– Maximum Gray Levels – 4096 (12-bit)Specifications:– External Dimensions: 30.49 x 42.80 mm
– Active Area: 25.99 x 36.02 mm
– Sensor Plate Thickness: 5.41 mm
– Sensor Cable Length: 3 meters
– Image Resolution: 26.3 lp/mm theoretical 20 lp/mm actual
– Image Size: 1896 x 1368 pixels
– Image Pixel Size: 19×19 micronsThe Clio Digital X-ray Sensor is equipped with a patented, Kevlar reinforced cable to provide maximum durability. Unlike other products, the USB cable of the Clio is fully replaceable if damaged. Constructed with special shock absorbers inside the sensor housing to protect components from exterior damage, the Clio is also one of the few fully water submersible sensors, sealed with a unique rubber polymer interior housing. |
Reviews
There are no reviews yet.