View cart “Dexis Intraoral Digital Dental X-Ray Sensor” has been added to your cart.
-35%
Availability: In Stock
3Shape TRIOS 4 Intraoral Scanner For Sale
$15,800.00$10,200.00
Caries diagnostic aid for surface caries.
TRIOS 4 has built-in fluorescent technology that aids in the identification of possible caries. Using TRIOS 4, dental professionals can now be aided in the early-detection of surface caries, without the need for an additional scanning device.
Caries diagnostic aid for interproximal caries. TRIOS 4 will also feature a dedicated transillumination smart tip later this year. The smart tip will aid in the identification of possible interproximal caries undetectable to the eye, without emitting radiation.
Other people want this. 15 people have this in their carts right now.
Take your dentistry beyond treatment
Our intraoral scanning solutions allow you to take your dentistry beyond. The new 3Shape TRIOS 4 combines our established superior scanning technology with groundbreaking caries diagnostic aid technology* for both surface and interproximal caries. No additional scanning device needed.
Smart tips 3Shape TRIOS 4 Intraoral Scanner
The new generation of TRIOS smart tips feature instant-heat technology for optimized scanning.
Be scan-ready in seconds with instant-heat technology.
Scan 2-3 times as many patients with instant-heat in combination with 30% more battery life.
Optimal scanning due to automatic use counter and tip-change alert.
The TRIOS system is a complete in-house ecosystem including a scanner and extensive design software. This means there are plenty of options depending on your needs. Those who are just looking for a scanner and want to utilize labs may look into the basic, cheaper options. Those who want to design crowns, bridges and other prosthetics can opt for design modules. The only missing component is a milling machine, which if you want to mill restorations in-house, will have to be from a third party. This proves to be a weak link in the digital chain.
At iDD, we have been using the TRIOS 3 for over four years in our clinic, spending literally thousands of hours learning the workflow. We have carried out all aspects of dentistry using the TRIOS system including same-day crowns, implant surgical guides, implant restorations and digital smile design.
Disclaimer: This is an impartial review of the scanner and we do not have any ties to the company. The team at iDD remain unwaveringly committed to providing you with objective and trustworthy information and therefore do not seek any sponsorship. 3Shape kindly loaned us a TRIOS 4 scanner, due to a personal interest in upgrading our older TRIOS 3 model. Our team at iDD are constantly approached by scanner companies to review their scanners and it is always made clear that they will have no part in writing reviews or restricting any conclusions iDD makes in our thorough analysis and clinical use of these products.
Reviews (0)
Reviews
There are no reviews yet.
Be the first to review “3Shape TRIOS 4 Intraoral Scanner For Sale” Cancel reply
Caries diagnostic aid for surface caries.
TRIOS 4 has built-in fluorescent technology that aids in the identification of possible caries. Using TRIOS 4, dental professionals can now be aided in the early-detection of surface caries, without the need for an additional scanning device.Caries diagnostic aid for interproximal caries.
TRIOS 4 will also feature a dedicated transillumination smart tip later this year. The smart tip will aid in the identification of possible interproximal caries undetectable to the eye, without emitting radiation.
The Waterlase express is the all-tissue laser that will change the way you practice dentistry. Waterlase Express has the power to solve dental problems beyond expectation. The versatile and gentle combination of laser energy and water has the power to relieve dental anxiety at the source, for you, your team, and your patients. The countertop all-tissue laser features a miniaturised laser engine that is 50% smaller than the Waterlase iPlus, offering the benefits of all-tissue laser technology in a way that is compact, simple and easy to use.
The DWX-4W goes beyond dry milling and is the epitome of wet grinding technology. It uses 4-axis simultaneous movements to wet grind precision inlays, onlays, crowns, veneers and short-span bridges from glass ceramic and composite resins.
iTero HD2.9 simply allows to digitally scan a prepared tooth and wirelessly send this information directly to the dental laboratory for fabrication of a CAD/CAM crown without the gooey mess.
iRay D3 is one of the most popular products in the world and has been leading the technology since 2004. There are several companies following our concept and make it look similar and sell it cheaper. iRay D3 (DX3000)’s core detail technology and safety features cannot be copied.
3 Shape D2000 Dental lab Scanner Optimized processing speed: creates faster performance and better scanning workflows for several indications Shortens waiting time between creating orders and starting the scan, and enables technicians to begin next scan without having to wait for post processing.
Take your dentistry beyond treatment
Our intraoral scanning solutions allow you to take your dentistry beyond. The new 3Shape TRIOS 4 combines our established superior scanning technology with groundbreaking caries diagnostic aid technology* for both surface and interproximal caries. No additional scanning device needed.Smart tips 3Shape TRIOS 4 Intraoral ScannerThe new generation of TRIOS smart tips feature instant-heat technology for optimized scanning.Be scan-ready in seconds with instant-heat technology.Scan 2-3 times as many patients with instant-heat in combination with 30% more battery life.Optimal scanning due to automatic use counter and tip-change alert.The TRIOS system is a complete in-house ecosystem including a scanner and extensive design software. This means there are plenty of options depending on your needs. Those who are just looking for a scanner and want to utilize labs may look into the basic, cheaper options. Those who want to design crowns, bridges and other prosthetics can opt for design modules. The only missing component is a milling machine, which if you want to mill restorations in-house, will have to be from a third party. This proves to be a weak link in the digital chain.At iDD, we have been using the TRIOS 3 for over four years in our clinic, spending literally thousands of hours learning the workflow. We have carried out all aspects of dentistry using the TRIOS system including same-day crowns, implant surgical guides, implant restorations and digital smile design.Disclaimer: This is an impartial review of the scanner and we do not have any ties to the company. The team at iDD remain unwaveringly committed to providing you with objective and trustworthy information and therefore do not seek any sponsorship. 3Shape kindly loaned us a TRIOS 4 scanner, due to a personal interest in upgrading our older TRIOS 3 model. Our team at iDD are constantly approached by scanner companies to review their scanners and it is always made clear that they will have no part in writing reviews or restricting any conclusions iDD makes in our thorough analysis and clinical use of these products.
2019 BIOLASE Waterlase Express Dental Laser With Hand Piece
Restorative
– Cavity Preparations
– Sub-gingival decay removal
– TroughingSoft-Tissue
– Achieving hemostasis
– Frenectomy techniques
– Biopsies and lesionsPerio
– REPAIR Perio protocol (all steps)
– Closed crown lengthening
– Flap surgeryImplant
– REPAIR Implant protocol (all steps)
– Implant debridement
– Flap surgeryEndo
– Access, cleaning, and shaping
– Pulpotomy, Pulp Cap
– Disinfection of Root Canal
– Removal of Smear LayerSpecifications:
– Wavelength: 2.78 µm (2780 nm)
– Max. Power Output: 4 W Pulse
– Energy: 200 mJ Pulse
– Rep Rate: 5-50 Hz Pulse
– Duration: H: 60 µsec, S: 700 µsec
– Laser Engine: Miniaturized Er,Cr:YSGG laser engine
– Fiber Optic Cable: White, highly flexible, reliable
– User Interface: Applications-based, removable tablet
– Touchscreen Size: 9.7”x 6” (24.64cm x 15.24cm)
– Pre-sets: 95 procedural presets, with simple slider bar to adjust settings within each procedure
– Additional Content: Procedure animations, case studies, best practices
– WiFi-enabled for BIOLASE Connect: Yes
– Weight: 27 Lbs (12.247 kg)The Waterlase express is the all-tissue laser that will change the way you practice dentistry. Waterlase Express has the power to solve dental problems beyond expectation. The versatile and gentle combination of laser energy and water has the power to relieve dental anxiety at the source, for you, your team, and your patients. The countertop all-tissue laser features a miniaturised laser engine that is 50% smaller than the Waterlase iPlus, offering the benefits of all-tissue laser technology in a way that is compact, simple and easy to use.2019 BIOLASE Waterlase Express Dental LaserWaterlase Express is the only laser to feature an in-depth, step-by-step, 4K HD animation for every step of every procedure. No matter your level of expertise, from beginner to advanced user, the Waterlase Express animation library is a dazzling, informative training resource.– 95 clinical presets for soft tissue, hard tissue and bone.
– Step-by-step procedure animations.
– Removable tablet with easy-to-use touchscreen interface.
– Loaded system menu features on-board reference material.
– H MODE – 60 microseconds – a cooler mode for cutting enamel and all other applications.
– S MODE – 700 microseconds – a hotter mode for coagulation.
– Stay up-to-date and connect with fellow users, clinical mentors and online training directly from the unit.
– Customer care access for direct help when needed.
– Sturdy handle for easy transport makes the Waterlase express conveniently portable.
– Wireless footswitch for easy integration.
– Light and flexible SureFire trunk fibre ensures minimal resistance and treatment fatigue.
– Over 2 hours of 4K-Ultra-HD learning content
Reliable High PerformanceIn addition to milling on X, Y and Z axes, the DWX-4W rotates pin-type blocks 360 degrees on a fourth axis (A axis) to support undercuts. The ball screw-driven 4-axis control allows for smooth, high-precision machining. The DWX-4W’s high-performance 60,000-RPM Jaeger spindle is known for its reliability and supports precision milling of glass ceramics and composite resin. With its multi-pin clamp, the DWX-4W is a wet dental milling machine that can mill up to three different pin-type materials continuously in one operation. As a result, prosthetics for up to three different patients can be produced in a single production run, saving time, labour and costs.
Features and Benefits:
Simultaneous 4-axis machining
4-state Automatic Tool Changer (ATC)
60,000 RPM Jaeger DentaDrive Spindle
CAM software bundled
Virtual Machine Panel (VPanel)
Fully-integrated water and coolant filtration system
Coolant leakage & flow monitoring sensors
Tool life monitoring
Mail notification system
Summary Roland DWX-4W Dental Milling Unit
• Maximum Convenience
• Virtual Machine Panel
• Progress and Error Alerts for Error-Free Milling
• Coolant Compartment and Water Filtration
• Clean Cutting Area for Precision Milling
• Economical Open Architecture
• CAM Software Included
• Growth Potential
• Peace of MindThe DWX-4W’s high-performance 60 000 RPM Jaeger DentaDrive spindle supports precision milling. It’s equipped to mil pin-type blocks, including glass ceramics and composite resin – acclaimed in the industry for their superior strength and aesthetics. materials can be finished with a short finishing tome, dramatically reducing labour and production time.In addition to milling on X, Y and Z axes, the DWX-4W rotates pin-type blocks 360 degrees on a fourth axis (A axis) to support undercuts, the rigid ball screw-driven 4-axis control allows for smooth, high-precision machining. With its multi-pin clamp, it can mil up to three different pin-type materials continuously, enabling production three different patient prosthetics in a single production run. it also features an Automatic Tool Changer (ATC) that auto-changes grinding burs without interrupting the production process.
iTero HD2.9 simply allows to digitally scan a prepared tooth and wirelessly send this information directly to the dental laboratory for fabrication of a CAD/CAM crown – without the gooey mess. The wireless transmission saves shipping time and eliminates distortion that can often be found with traditional stone modelsThe digital scan is, quite literally, digitally perfect. We then deliver the digital scan to our lab where a precision fitting restoration is created.iTero HD2.9 system eliminated the uncomfortable patient experience of traditional impressions, utilizes advanced state of the art digital technology, and provides with superior fitting restorations with little or no adjustmentsiTero Intra-Oral Scanner
Model: HD2.9
2014 Date of Mfg.
Brochure/Video: Click Here
Limited Use
Includes:
iTero Software (pre-loaded)
90 Day Parts Warranty
User Manual(s)
Free Standard Shipping (Commercial USA Addresses)
Its ergonomic design comes with safe docking station. It has thin fiber optic cable which enables quick data transfer from the wand to the cart. This optimized cable length assists various cart positions in the operatory.Orthodontic treatment is more than just straightening teeth; it’s about ensuring your teeth and jaws are in alignment. To achieve this, we need to get an accurate look at where your teeth are positioned. To do this, we use the iTero Intraoral digital scanner.A good impressionIn the orthodontic and dental industries, ‘impressions’ is the term we use for getting a good picture of where your teeth currently sit. These impressions were previously taken using a type of dental cement. Pasted on your teeth, patients were required to lie for a few minutes while the cement-like material set. The dental professional could then remove the set material which had formed an ‘impression’ of your teeth.This process was messy, rather unpleasant and not very comfortable. Fortunately, that method is a thing of the past. These days, we use scanning technology and at L&L Orthodontics, our technology of choice is the iTero Intraoral digital scanner.
What is the iTero scanner?
The iTero scanner is new 3D orthodontic scanning technology. Using the latest developments in intraoral scanning, the iTero scanner accurately scans your teeth as part of your orthodontic assessment. The iTero scanner is made up of a small, wand-like device which is used to scan your teeth and jaws. The data it is collecting then appears on the computer screen, allowing you to see the ‘impressions’ the scanner is taking.The iTero scanner works in with Invisalign®* treatment and lets you see what your teeth will look like post-treatment, even before you’ve started. Before we recommend a course of treatment for you, we’ll take impressions of your teeth using the iTero scanner to ensure we are making our recommendation on accurate information.To find out more about the iTero scanner and other orthodontic technology we use here at L&L Orthodontics, book your specialist consultation today.
Dexcowin IRay D3 Dental Handheld X-Ray System
iRay D3 Dental Mobile Handheld X-Ray
Dexcowin invented the iRay D3 more than 10 years ago, in 2004, after several years of R&D. The iRay D3 has some different names for the OEM, but the official product model name is DX3000. We have designed it as a pure handheld portable X-ray. It has many different features for mobile, battery powered, handheld, cordless, digital, and camera types. It is lightweight, durable, stable, easy to use, saleable, and compatible to all radiation detectors, with clear, effective images. However, what we would like to emphasize, and what we are so proud of about the iRay D3 is that it is safe for handheld use. This is because we are concerned about the safety and care of the operators and patients. This is our top priority and responsibility to our customers. We follow all required rules from FDA, GMP, CE and all local health departments from the over 40 countries and states we have registered in. We keep to the safety regulations during manufacturing. Our long term company strategy for iRay D3 is to “Make it safe,” “”Make it better than yesterday,” and “Make it durable.”A summary of iRay D3 features Dexcowin IRay D3 Dental Handheld X-Ray SystemiRay D3 Convenience & Cost effectiveness
You can stay with the patient, and it is especially beneficial for children.
No need to construct separate shielded rooms, so all operation rooms can be X-ray rooms.
Lightweight 4 lbs gives you handy operation and saves time for full mouth X-ray.
More than 200 shots on single charge (1.5 hour). Battery and a spare battery included.iRay D3 compatibility
Applicable and be compatible with all detectors, film, PSP and all kinds of sensors.IRay D3 Mobility
Completely mobile system with a battery and extras.
Compact design and lightweight allows it to be moved anywhere in and out of office.IRay D3 Safety
Designed for handheld, so it does not affect the operator with extremely low leakage radiation.
Rechargeable Lithium polymer battery is very safe and stable with a safety circuit
Battery can be charged separately with a main X-ray body.Other accessories
AllMyT mobile cart for iRay D3 to be mounted on.
A neck strap to balance the weight and preventing dropping.
– Impression scanning:
Multi line scanning in the D2000 and D1000 improves coverage and performance for accurate scanning of impressions to enable restorative design without the need to pour gypsum models.
All in One scanning of triple tray impressions Special mount enables triple-tray scanning capture of upper, lower and bite in one scan.– Improved workflows for single tray impressions:
Provides support for single tray impression scanning including bite alignment.The software upgrades are available for all relevant 3Shape lab scanner models. Current lab scanner owners will receive the upgrades as a LABcare software update, where applicable.Impression scanning the future is now:
The D2000 and the smaller D1000 lab scanner feature multi-line technology. Multi-line technology utilizes multiple scan lines in a single shot to significantly improve cavity and impression capture.This enables the D2000 to accurately scan analog impressions sent to the lab by a dentist. This in turn, eliminates the need for labs having to pour or create a gypsum model from the impression. This saves several steps in the workflow and allows labs to print instead, cost effective 3D models derived from the analog impression if they need a physical working model.While all 3shape scanners support impression scanning only the D2000 and D1000 feature multi line technology.“Impression scanning is today’s reality and the future. No waiting for models to set, no plaster inaccuracies and we reduce costs. Every lab should invest in this technology,” Carlo Backes, Excent Tandtechniek BV, Holland.About the D2000 dental lab scanner:
Introduced at the 2015 Midwinter show, the D2000 was named a top 10 coolest product at the event. The D2000 captivated the industry by having room for two models in its interior, enabling technicians to scan two models at once and perform a complete case like a three-unit bridge in just one scan.D2000 All in-one scanning for max volume throughputs
– 4 x 5 MP cameras, Blue LED Multi-line
– Accuracy: 5 µm (ISO 12836) / 8 µm (Implant bar)
– Die scan time: 15 sec
– Full arch scan time: 20 sec
– Color texture scanning
– No need for separate die scan
– All in One scanning: room for 2 models
– Impression scanningIncludes:3SHAPE D2000 DENTAL LAB 3D SCANNER
– Remainder of a 5 year factory warranty
– 3 Shape Dental Designer w/Additional Seat
– 3 Shape Model Builder
– 3 Shape Occlusion Set Up Tool
– ScanIt Impression Module
– Impression Fixture
– Anatomical CAD Library
– Calibration Kit
– HP Envy Phoenix Desktop PC
Reviews
There are no reviews yet.