| Description | The Ion Chef System simplifies the Ion Torrent next-generation sequencing (NGS) workflow by integrating several manual and instrument steps into a single process. The Ion Chef System workflow now incorporates all steps of library preparation (targeted PCR amplification with respective primer panel, partial digestion of primer sequences | A true open architecture system, the compact DWX-50 integrates with industry standard 3D scanners, computers and all popular CAD/CAM software to provide a very cost-effective production solution. Advanced communications tools and operating features allow the DWX-50 to mill unattended while providing confidence in the finished product to the lab technician. | SuniRay 2 achieves maximal image quality with superior diagnostic capabilities while maintaining the lowest radiation levels among all digital sensors. The comprehensive and feature-rich Prof. Suni Advanced Imaging Software supplements the SuniRay 2’s high-quality imaging with a wide array of user-friendly customization and image-enhancement tools. With the SuniRay 2, Suni has created a complete digital radiography system that seamlessly integrates with your entire practice. | Economical pressing and firing performance. Top quality results. | The new highly accurate 0.5 mm milling tool reliably delivers first class clinical results. Switch to Extra Fine milling mode for a higher level of detail with occlusal fissures and interdental areas on bridges. | At only 4.2 pounds, the portable x-ray, is considered to be the lightest x-ray generator on the market. Many design features are included with an LCD Display, and High Frequency Tube, a perfect balance of technology and simplicity. There is no doubt that the EXARO is the best, handheld and portable x-ray, available. |
| Content | Thermo Fisher Ion Torrent S5 XL Sequencer
Thermo Fisher Ion Torrent S5 XL Sequencer & Ion Chef System with Warranty Ion Torrent S5 XL Sequencer New Ion Chef System Specifications For Use With (Equipment) Ion GeneStudio S5 System, Ion GeneStudio S5 System, Ion PGM System, Ion Proton System, Ion S5 XL System Operating System Ion GeneStudio S5 System, Ion Personal Genome Machine (PGM) System, Ion Proton System Chip Compatibility Ion PI Chip v3, Ion 314 Chip v2 BC, Ion 316 Chip v2 BC, Ion 318 Chip v2 BC, Ion 510 Chip, Ion 550 Chip, Ion 530 Chip, Ion 520 Chip, Ion 540 Chip Dimensions 28 x 22 x 28 in (71 x 55 x 71 cm) High-throughput Compatibility High-throughput Compatible, Automated Protocols Operating Environment Temperature: 15°C-25°C Run Time Varies with chip type and read length selected Max. Voltage 100 V (min) to 240 V (max) Ion Chef System Thermo Fisher is the next generation of workflow simplification products for the Ion GeneStudio S5 Systems. The Ion Chef System provides automated library preparation, template preparation, and chip loading for users at any experience level. In less than 15 minutes of up-front hands-on time and with the use of pre-packaged library preparation reagent kits, the Ion Chef System provides a convenient walk-away workflow resulting in equalized, pooled libraries ready for templating. The automated workflow supports Ion AmpliSeq one- and two-pool designs. After library preparation, less than 15 minutes of hands-on time is required to set up the Ion Chef System to perform fully automated template preparation, producing one or two chips ready for sequencing. Automating your sample preparation workflows on the Ion Chef System results in significantly higher productivity. The Ion Chef System: • Simplifies the workflow • Minimizes sources of user-introduced variability • Helps save time and labor • Supports sequencing preparation for the Ion GeneStudio S5 Systems The Ion Chef System features: • Automated Ion Ampliseq library preparation, template preparation, and chip loading • Cartridge-based reagent system • Sample and reagent-tracking capability • Intuitive user interface • On-board diagnostics Simplify the Ion Torrent NGS workflowThe Ion Chef System simplifies the Ion Torrent next-generation sequencing (NGS) workflow by integrating several manual and instrument steps into a single process. The Ion Chef System workflow now incorporates all steps of library preparation (targeted PCR amplification with respective primer panel, partial digestion of primer sequences, adapter/barcode ligation, purification, library equalization and pooling), as well as all steps of template preparation and chip loading. The simple, automated workflow provides easy access for users of any experience level. Minimize variability and load chips reproduciblyThe Ion Chef System provides reproducible chip loading by automating multiple manual chip-loading steps. The sophisticated visual system inside the Ion Chef System is designed to help reduce user-introduced error and variability by providing barcode reading and positive identification of samples, chips, and reagents. The visual system performs the setup check before the run, as well as the reagents and consumables load and unload check, calibration, and diagnostics. | Roland DWX-50 5-Axis Dental Milling Machine
The compact DWX-50 combines 5-axis simultaneous machining capability and a five-station automatic tool changer to deliver advanced features at a very affordable price point. Designed specifically for dental labs and technicians, the user-friendly DWX-50 allows for clean, quiet operation and the quality production of complex dental arches, abutments, bridges, copings and crowns from zirconia, wax and PMMA. Equipped with an integrated air blower and dust collection system, the DWX-50 ensures protection of moving parts while maintaining a clean, safe environment. Built on open technology, the DWX-50 supports a wide range of industry standard CAD/CAM software and tools, allowing for easy integration with popular commercially available dental prosthetic production solutions.5-axis simultaneous machiningCapable of 5-axis simultaneous machining, the DWX-50 supports the production of high-quality dental prosthetics at an affordable price point. The DWX-50 is designed to mill on X, Y and Z axes, rotating blocks and discs of material 360 degrees in both clockwise and counterclockwise movements, as well as tilting materials forward and backward 20 degrees to support complex cuts.Five-station automatic tool charger Roland DWX-50 5-Axis Dental Milling MachineThe five-station Automatic Tool Changer (ATC) with a tool length sensor enables the user to run multiple tools for one job or an entire disc unattended. Instead of inspecting finished pieces to determine if everything was milled correctly, the integrated tool diagnostics feature will notify users if a tool was broken prior to completion, resulting in reduced time and wasted materials.Taking control of prosthesis productionWith its unmatched ease of use and short learning time, the DWX-50 provides a cost-effective solution that is ideal for dental labs wishing to take control of the production process while avoiding the long lead times and costs associated with outsourcing.A true open architecture system, the compact DWX-50 integrates with industry standard 3D scanners, computers and all popular CAD/CAM software to provide a very cost-effective production solution. Advanced communications tools and operating features allow the DWX-50 to mill unattended while providing confidence in the finished product to the lab technician. | SuniRay 2 Digital Intraoral Sensor Size 1 and Size 2
X-Ray Imaging Properties- Resolution: The pixel resolution of the high resolution (HiRes) sensors exceeds 15 lp/mm. The standard resolution of an X-Ray image, as measured by the modulation transfer function (MTF) exceeds 12 lp/mm. This is measured by using a standard 60 kV intraoral X-ray source.
- Does Efficiency: The sensor will produce a high quality image with an X-Ray dose that is only a fraction of the standard dose required by Dental X-Ray film.
- Diagnostic Efficacy: The system will produce a superior image quality of images obtained when using standard dental X-Ray film. This allows the dentist to diagnose standard intraoral pathologies encountered during screening procedures.
- Wide dynamic range: The sensor pixel well capacity is very high, allowing a higher accommodation of greyscale (bone density) dynamic range.
Sensor Material Biocompatibility SpecificationsThe sensor’s body material and cable material are biocompatible. The sensors and all component materials have been tested to comply with ISO standards, and specifically, the sensor complies with EN IS0-10993 (Biological Evaluation of Medical Devices). | Technical data | Size 1 | Size 2 |
|---|
| Sensor Dimensions (mm) | 39.5 x 26 | 43.5 x 31.5 |
|---|
| Active Area (mm) | 31.1 x 20.2 | 35.2 x 26.2 |
|---|
| Sensor Technology | CMOS APS Fiber Plate | CMOS APS Fiber Plate |
|---|
| Maximum Gray Levels | 4096 | 4096 |
|---|
| Sensor Cable | 3 feet (1m) | 3 feet (1m) |
|---|
| Cable Attachment | Reinforced Strain Relief | Reinforced Strain Relief |
|---|
| USB Module | Integrated USB 2.0 Module | Integrated USB 2.0 Module |
|---|
| Software | Prof. Suni | Prof. Suni |
|---|
X-Ray Imaging Properties SuniRay 2 Digital Intraoral Sensor Size 1 and Size 2- Resolution: The pixel resolution of the high resolution (HiRes) sensors exceeds 15 lp/mm. The standard resolution of an X-Ray image, as measured by the modulation transfer function (MTF) exceeds 12 lp/mm. This is measured by using a standard 60 kV intraoral X-ray source.
- Does Efficiency: The sensor will produce a high quality image with an X-Ray dose that is only a fraction of the standard dose required by Dental X-Ray film.
- Diagnostic Efficacy: The system will produce a superior image quality of images obtained when using standard dental X-Ray film. This allows the dentist to diagnose standard intraoral pathologies encountered during screening procedures.
- Wide dynamic range: The sensor pixel well capacity is very high, allowing a higher accommodation of greyscale (bone density) dynamic range.
| Ivoclar Vivadent Programat EP 3010Programat EP 3010The Programat EP 3010 is characterized by cost effectiveness and high-quality press and firing results. In addition, the Programat EP 3010 is optimally coordinated with Ivoclar Vivadent press ceramic materials such as IPS e.max Press.In comparison to its predecessor model EP 3000, the operation of the Programat EP 3010 has become even simpler due to the new colour touch display, the modern icons, the intuitive menu-based navigation and the proven membrane-sealed keypad.The new QTK2 heating muffle in combination with the SiC bottom reflector ensures homogeneous heat distribution in the firing chamber. As a result, the investment ring is preheated more evenly and reliably. Furthermore, these features enable the user to press difficult-to-press objects, e.g. with very thin marginal areas, and to achieve even higher quality results.The electronic press drive with force sensor ensures the precise control of the press plunger in the micrometre range. The integrated Crack Detection System (CDS) immediately interrupts the press process if a crack in the investment ring occurs. Therefore, restorations are optimally protected. Advantages:- Programs are optimally coordinated with Ivoclar Vivadent materials.
- QTK2 muffle technology with SiC bottom reflector for homogeneous heat distribution.
- Colour touch screen and proven membrane-sealed keypad for easy operation.
- Electronic press drive with force sensor produces high-quality press results. No compressed air connection required.
- Crack Detection System detects cracks in the investment ring.
- Easy and automatic temperature calibration at two reference points (ATK2).
- Simple software update via USB flash drive.
- Remote diagnosis function via data file for optimum support by a service centre.
- Broad range of programs: 300 individual firing and 20 individual press programs.
- Power Saving Technology for power-saving operation.
| DENTSPLY SIRONA CEREC PRIMEMILLSpeedEngineered for speed and precision, the new CEREC Primemill inherits the proven strength of its predecessor and raises its powerful performance to entirely new heights.You can now mill zirconia restorations in Super Fast milling mode in around 5 minutes, cutting processing times by more than half. The improved grinding mode for high quality glass ceramics also grinds the material faster than ever before. The result? Satisfied patients and high productivity.QualityDENTSPLY SIRONA CEREC PRIMEMILL A combination of new electronics, software, motors and mechanical components contributes to finer resolution and enhanced dynamics. This results in outstanding restoration margins and surface details – for extremely precise results.The new highly accurate 0.5 mm milling tool reliably delivers first class clinical results. Switch to Extra Fine milling mode for a higher level of detail with occlusal fissures and interdental areas on bridges.VersatilityDENTSPLY SIRONA CEREC PRIMEMILL Welcome to a world where you‘re spoiled for choice! The new CEREC Primemill combines wet and dry milling and wet grinding. No matter the indication, with CEREC Primemill you can select from a broad range of material options from validated partners providing the flexibility and predictability you need to offer patients the best possible treatment.Choose from the full spectrum of machining options, including dry and wet milled zirconia, or wet grinding of glass and hybrid ceramics.ConvenienceDENTSPLY SIRONA CEREC PRIMEMILL The new 7” touch interface with user guidance guides operators step-by-step through the workflow, key maintenance procedures and other routine tasks, so you can delegate milling with complete peace-of-mind. The integrated block scanner is a time-saving new feature that automatically scans material blocks with compatible data matrix codes and records the information, including type, size, color and zirconia enlargement factor. All CEREC Primemill tools are fitted with a color-coded RFID chip that is read by the RFID tool reader, feeding into the tool status display, alerting the user if a tool needs replacing. This ensures all tools are performing at optimal levels. A LED light strip indicates unit status and milling and grinding progress.The all-new CERECThe latest generation of our CEREC system sets new standards so you can offer your patients an unmatched combination of single-visit dentistry and excellent quality.A unique solutionThe CEREC system comprises world-class components that interact perfectly ensuring seamless workflows. With CEREC Primescan, CEREC Software 5 and CEREC Primemill, digital chairside dentistry is faster, easier and more reliable than ever before.Outstanding resultsAfter 35 years of continuous optimization, CEREC gives you the options you need to treat multiple indications with the confidence that comes from outstanding results.
Designed to stand out – and fit inThe new CEREC Primemill does not just communicate seamlessly with other CEREC devices, but its sleek design is also the perfect match – and the ideal look for a progressive dental practice. | Xray2go Hand Held Dental Portable X-Ray System| FDA Registered. Welcome to the new way of taking X-rays in Dental Offices: x-ray2go is the way to go! x-ray2go is a portable hand held camera that uses a high frequency inverter to generate a stable X-ray output with DC high voltage. This effective DC unit enables patient and operator to be exposed to the least amount of radiation. The integrated compact “Camera like” generator increases the user’s confidence and decrease the negative perception patients have about X-rays. It is small: 5.6″ (W) x 3.3″ (D) x 1.2″ (H). Best of all it only weighs 4.18 Lbs (1.9 Kgs), the lightest on the market.• Portability – room to room ease
• No installation necessary versus complex, expensive and time consuming on-wall installation.
• No need for pass troughs
• Large LCD display – easy to read
• Simple touch controls
• Adjustable exposure time
• Hundreds of images from one (1) battery charge
• High resolution diagnostic images
• No blur from hand movement high-frequency generator produces clear images while reducing
patient dose
• Shield protects the operator from scattered radiation – small dose of radiation emitted
• Leading technology provides the highest level of safety, quality and patient care
• Perfect for special needs patients, home health care patients, nursing home patients, children and
veterinary practices
• Perfect for small operatories
• Perfect for mobile dentistry where room is a big factor |
| | | | |
| | | | Specifications Xray2go Hand Held Dental Portable X-Ray System- Portable, cordless x-ray device
· FDA Registered – K082875
· Safe to use-leakage and scatter radiation are less than conventional wall mounted units
· Small & lightweight (4.2 lbs)
· Camera-like ergonomic design
· 100’s of images on single charge!
· Compatible with both digital & film use
· Simple operation
· Highest image quality
· Wide exposure range
· Lowest patient exposure
· Compact outside—smart inside
· Great staff acceptance
· Convenient for children and “x-ray phobic” patients
· Helps eliminate patient fear and reduces x-ray rejection
| X-ray installation | Tube voltage: 60KV
Tube current: 2mA
Heat Capacity: 8.5KHU | | X-ray Generator | Type: High Frequency Inverter
Power Output: 100W
X-ray Tube | | X-ray Tube | Anode Type: Stationary
Anode Angle: 20°
Focal Spot: 0.8mm | | X-ray Control | Exposure time set 0.01 ~ 1.6sec (0.01 sec step) | | Power Requirement | 25.2VDC | | Weight | 4.2 lbs. | | Dimensions | 6.7”(W) x 6.1”(D) x 5.25”(H) |
|
|
|
Reviews
There are no reviews yet.